Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
From: "Catalin Borcea" <catalin@electricant.ambra.ro>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] OUTPUT chain marking after or before routing?
Date: Fri, 18 Jul 2003 05:04:47 +0000	[thread overview]
Message-ID: <marc-lartc-105850492017579@msgid-missing> (raw)
In-Reply-To: <marc-lartc-105842045025983@msgid-missing>

----- Original Message -----
From: "Martin A. Brown" <mabrown-lartc@securepipe.com>
To: "Chijioke Kalu" <kchijioke@msn.com>
Cc: <catalin@electricant.ambra.ro>; <lartc@mailman.ds9a.nl>
Sent: Thursday, July 17, 2003 6:55 PM
Subject: Re: [LARTC] OUTPUT chain marking after or before routing?


> Catalin,
>
> >When I try to connect to a smtp port somewhere in the Internet, tcpdump
show
> >me that these packets go to the eth2 interface (the main table default
> >route). I don't know where is my mistake but it seems that the marking in
> >the OUTPUT chain occurs AFTER and not BEFORE routing. Is this a correct
> >behaviour? How can I solve my problem? Please help!
>
> According to my reading of the KPTD (and my understanding), packets
> generated on the local machine have already been routed by the time the
> OUTPUT chain is traversed.  See:
>
>   http://www.docum.org/stef.coene/qos/kptd/
>

I'm very confused now. Look what is written in the iptables man page:

#############
 mangle This  table  is used for specialized packet alteration.  It has two
built-in
              chains: PREROUTING (for altering incoming packets before
routing) and OUTPUT
              (for altering locally-generated packets before routing).
######################

So how it is? OUTPUT marks packets AFTER or BEFORE routing?


> I see two potential approaches to this problem:
>
>   - invert your logic; main routing table uses ppp0 gateway IP as default
>     gateway, mark all traffic passing through your router box, and use
>     "ip rule add fwmark $MARK table $INTERNET" with another routing
>     table for the Internet-bound traffic.

This approach is harder for me because this is a working gateway and I don't
wan't to disturb the users with my tests. But, it is a very good idea and
maybe I will try it.

>
>   - send all locally generated traffic via ppp0; "ip rule add iif lo
>     table smtp" and watch all traffic generated on the local machine leave
>     via ppp0.  You'll want to add the locally connected networks to table
>     smtp.

I also tried that and it works. But I don't want to send all locally
generated traffic to ppp0. In fact I want only the smtp traffic on ppp0. The
Web traffic (including Squid generated, which is locally generated) must go
to eth2.

Thank you for your reply,

- catalin -


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

  parent reply	other threads:[~2003-07-18  5:04 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-07-17  5:37 [LARTC] OUTPUT chain marking after or before routing? Catalin Borcea
2003-07-17  6:04 ` ???????? ?????
2003-07-17  6:31 ` Catalin Borcea
2003-07-17  6:37 ` ???????? ?????
2003-07-17  7:15 ` Catalin Borcea
2003-07-17  7:32 ` ???????? ?????
2003-07-17 14:08 ` Chijioke Kalu
2003-07-17 15:55 ` Martin A. Brown
2003-07-17 16:50 ` lartc
2003-07-18  5:04 ` Catalin Borcea [this message]
2003-07-18 18:41 ` Martin A. Brown
2003-07-18 18:46 ` Martin A. Brown
2003-07-19  7:45 ` lartc
2003-07-20 15:19 ` Leonardo Balliache

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-lartc-105850492017579@msgid-missing \
    --to=catalin@electricant.ambra.ro \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox