From: Rio Martin <rio@martin.mu>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] CBQ.init
Date: Tue, 09 Sep 2003 02:48:29 +0000 [thread overview]
Message-ID: <marc-lartc-106307612716836@msgid-missing> (raw)
In-Reply-To: <marc-lartc-104039526016044@msgid-missing>
On Tuesday 09 September 2003 09:42, Mitsuru MIZUTANI wrote:
> Hello everyone,
> I am using CBQ.init to shape bandwidth but I have a problem.
> Linux PC2 (192.168.0.10)
> +---------------------+
> |eth0 192.168.0.1 | ← Linux router
> |---------------------|
> |eth1 192.168.1.1 |
> +---------------------+
> Linux PC1 (192.168.1.10)
> I want to limit bandwidth from "Linux PC1" to "Linux PC2"
> more than 10Mbps.
> So I set CBQ.init following like this.
> /etc/rc.d/CBQ.init
> DEVICE=eth0,100Mbit,10Mbit
> RATE\x10Mbit
> WEIGHT=1Mbit
> PRIO=5
> When I set RATE=6Mbit,I can limit bandwidth 6Mbps.
> But I set RATE=7Mbit,8Mbit,...
> I can limit bandwidth only 6.95Mbps everytime.
> Why?
> Could you tell me how to limit bandwidth more than 7Mbps.
Have you checked link quality before you applied CBQ and after you applied CBQ
qdisc ? Perhaps this is caused by your switch, cable, etc.
Once you have checked it all, than we consider to take CBQ as the problem.
Regards,
Rio Martin.
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next prev parent reply other threads:[~2003-09-09 2:48 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-20 14:37 [LARTC] CBQ.init Emmanuel SIMON
2002-12-20 18:04 ` Stef Coene
2003-04-23 18:58 ` [LARTC] cbq.init larry lefthook
2003-04-23 19:14 ` Stef Coene
2003-09-09 2:42 ` [LARTC] CBQ.init Mitsuru MIZUTANI
2003-09-09 2:48 ` Rio Martin [this message]
2003-09-09 10:36 ` Mitsuru MIZUTANI
2003-09-09 15:16 ` Stef Coene
2003-09-09 18:48 ` Catalin Petrescu
2003-09-09 20:07 ` Mitsuru MIZUTANI
2003-09-10 5:52 ` Raghuveer
2003-09-16 4:08 ` Rio Martin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-106307612716836@msgid-missing \
--to=rio@martin.mu \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox