From: Raghuveer <raghuveer-rc@naturesoft.net>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] CBQ.init
Date: Wed, 10 Sep 2003 05:52:58 +0000 [thread overview]
Message-ID: <marc-lartc-106317317315330@msgid-missing> (raw)
In-Reply-To: <marc-lartc-104039526016044@msgid-missing>
Stef Coene wrote:
>>Thank you for your advice.
>>I have checked link quality before I applied CBQ and after I applied CBQ.
>>And ... I have checked switch, cable, etc.
>>I confirmed they are 100 Mbps full duplex.
>>
>>
>It's not becaused they are configured as 100Mbps full duplex that you are able
>to get 100Mbps. What's the speed you get when there is no cbq rulte?
>
>
100Mbps probably is the device bandwidth, what is the rate..? As
suggested by Stef before, its always better to have rate = 95% of the
rate. Its better to check tbf buffer too.
Regards
-Raghu
>
>
>>But ... as a result,I could limit bandwidth only 6.95Mbps.
>>Do you know how to limit bandwidth more than 10 Mbps ?
>>If you know , please tell me how to limit bandwidth more than 10 Mbps.
>>Won't you please tell me, everyone ?
>>
>>
>Can you check resources when you check the speed (cpu, disk, memory, switch)?
>And how do you check the speed?
>
>Stef
>
>
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next prev parent reply other threads:[~2003-09-10 5:52 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-20 14:37 [LARTC] CBQ.init Emmanuel SIMON
2002-12-20 18:04 ` Stef Coene
2003-04-23 18:58 ` [LARTC] cbq.init larry lefthook
2003-04-23 19:14 ` Stef Coene
2003-09-09 2:42 ` [LARTC] CBQ.init Mitsuru MIZUTANI
2003-09-09 2:48 ` Rio Martin
2003-09-09 10:36 ` Mitsuru MIZUTANI
2003-09-09 15:16 ` Stef Coene
2003-09-09 18:48 ` Catalin Petrescu
2003-09-09 20:07 ` Mitsuru MIZUTANI
2003-09-10 5:52 ` Raghuveer [this message]
2003-09-16 4:08 ` Rio Martin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-106317317315330@msgid-missing \
--to=raghuveer-rc@naturesoft.net \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox