* [LARTC] dead onlink
@ 2003-10-29 16:54 Marcelo
0 siblings, 0 replies; only message in thread
From: Marcelo @ 2003-10-29 16:54 UTC (permalink / raw)
To: lartc
Hello people:
I'm new in the forum. I've implemented the script for load balancing of
"Linux Advanced Routing & Traffic Control HowTo" and I've a question:
When I run the next command : "ip route" I get the folowing information:
--------------
192.168.0.32/27 dev eth0 proto kernel scope link src 192.168.0.33
192.168.0.96/27 dev eth2 proto kernel scope link src 192.168.0.97
192.168.0.64/27 dev eth1 proto kernel scope link src 192.168.0.65
192.168.0.128/27 dev eth3 proto kernel scope link src 192.168.0.129
127.0.0.0/8 dev lo scope link
default
nexthop via 192.168.0.126 dev eth2 weight 1 dead onlink
nexthop via 192.168.0.61 dev eth0 weight 1
-----------------------------
Is normal the part of "dead onlink" ?
Is it balancing the load between both internet providers?
Sorry for my English. I'm from Argentine.
Thanks in advance.
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-10-29 16:54 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-10-29 16:54 [LARTC] dead onlink Marcelo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox