Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
From: "Md.Ahsanul Haque Chowdhury" <ahaque@neksus.com>
To: lartc@vger.kernel.org
Subject: [LARTC] How to config ip in 2nd lan card in Linux pc and config ip masq?
Date: Sat, 06 Dec 2003 06:11:01 +0000	[thread overview]
Message-ID: <marc-lartc-107069106110461@msgid-missing> (raw)


Dear  Sir,

I have install 2 lan card (Micronet Lan Card) in Linux pc, in 1st lan card I 
will use public ip ( 203.x.x.x) and 2nd lan card I will use private ip 
(192.168.1.1). But after install the Linux 7.2 in  /etc/sysconfig/network-
scripts/  only showing   ifcfg-eth0  no interface is showing like ifcfg-eth1.

My questions are  how to enable or config 2nd lan card and config ip in 2nd lan 
card.?
& how to config ip masq to route to get Internet in local workstations.?

Pls help me to solve these problem.


Thanks & Best regards. 
__________________________
Md. Ahsanul Haque Chowdhury.
E-mail:ahaque@neksus.com , ahaque@link3.net
Web:http://www.neksus.com
Web:http://www.link3.net
Date:2003-12-06.
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

             reply	other threads:[~2003-12-06  6:11 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-12-06  6:11 Md.Ahsanul Haque Chowdhury [this message]
2003-12-06  7:19 ` [LARTC] How to config ip in 2nd lan card in Linux pc and config ip masq? Suraj Shankar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-lartc-107069106110461@msgid-missing \
    --to=ahaque@neksus.com \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox