Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
From: Suraj Shankar <su_raj_in@yahoo.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] How to config ip in 2nd lan card in Linux pc and config ip masq?
Date: Sat, 06 Dec 2003 07:19:55 +0000	[thread overview]
Message-ID: <marc-lartc-107069569412456@msgid-missing> (raw)
In-Reply-To: <marc-lartc-107069106110461@msgid-missing>

Hi,
--- "Md.Ahsanul Haque Chowdhury" <ahaque@neksus.com>
wrote:

> (192.168.1.1). But after install the Linux 7.2 in 
how did you get a copy of Linux 7.2? ;)
i'll safely assume thats RHL 7.2 ...

> /etc/sysconfig/network-
> scripts/  only showing   ifcfg-eth0  no interface is
> showing like ifcfg-eth1.
'netconfig' would be your best bet. Also, check dmesg,
to see that you card has been detected. If the card is
detected, you can copy ifcfg-eth0 to ifcfg-eth1 and
make the appropriate changes.

> & how to config ip masq to route to get Internet in
> local workstations.?
...just use iptables to masq. your internal subnet;
man iptables.

suraj.

__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

      reply	other threads:[~2003-12-06  7:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-12-06  6:11 [LARTC] How to config ip in 2nd lan card in Linux pc and config ip masq? Md.Ahsanul Haque Chowdhury
2003-12-06  7:19 ` Suraj Shankar [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-lartc-107069569412456@msgid-missing \
    --to=su_raj_in@yahoo.com \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox