[LARTC] CBQ Conf files

[LARTC] CBQ Conf files

[Deepak]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="iso-8859-1", Size: 721 bytes --]

Hi All,

I am using CBQ init file v 0.6.1 and doing banwidth allocation . I have to make seperate file fo reach group or ip i want to cap .

for e.g. if I have to cap say ten ips from 192.168.1.10 to 192.168.1.20 , each ip to say 32 Kbits , then do i have to make seperate file for each . I try doing something like this but this didn`t worked .

Sample Config file :


DEVICE=eth1,10Mbit,1Mbit
RATE=32Kbit
WEIGHT=3Kbit
PRIO=5
RULE=192.168.1.10
RULE=192.168.1.11
RULE=192.168.1.12

and so on 

But instead of allocating each Ip a bandwidth of 32 KBit , it capped for all ips combined to 32 Kbit.

Is there a work around of this or i have to make a seperate file for each IP.



Thanks

Deepak

[-- Attachment #2: Type: text/html, Size: 2326 bytes --]