* [LARTC] RE: How to measure jitter & packet loss?
@ 2001-03-25 7:30 raghu arni
0 siblings, 0 replies; only message in thread
From: raghu arni @ 2001-03-25 7:30 UTC (permalink / raw)
To: lartc
See http://dast.nlanr.net/Projects/Iperf/
hth,
A
>
>Inter-packet gaps if too big may cause real-time application to have
>jitters. But how do i measure the jitter if supposedly i send out a tcp/udp
>stream??
>
>Attached is an extract of tcpdump data.
>
>Any information on how to post-analyse tcpdump for jitter, packet loss is
>very very much appreciated.
>
>
>Regards.
>
>
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-03-25 7:30 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-03-25 7:30 [LARTC] RE: How to measure jitter & packet loss? raghu arni
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox