Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
* [LARTC] pfifo_fast with bands
@ 2001-03-30  0:59 Theepan
  0 siblings, 0 replies; only message in thread
From: Theepan @ 2001-03-30  0:59 UTC (permalink / raw)
  To: lartc

Hello,

I read about the pfifo_fast has 3 bands, which allow you to prioritize
traffic into these bands. I cannot find anything about these bands in the tc
command reference (http://linux.bergqvist.se/tc/). I might be looking the
wrong place - in which case, where should I look for help with this qdisc?

The idea is to give "time-critical" sessions such as ssh, telnet etc.
HIGHEST priority (based on fwmark), so these will not lag no matter how much
the connection is overloaded.

I was thinking somewhere in line of:
- letting the firewall mark the packets as they come in and go out (if the
ports match of course).
- use tc to throw them into bands in the pfifi_fast queue, where these
marked packets will be thrown into band 1, and the rest in into band 3 -
here by servicing the "time-critical" services before fx downloads.

Can this be done without it getting too complex with CBQ and stuff?

- Theepan


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2001-03-30  0:59 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-03-30  0:59 [LARTC] pfifo_fast with bands Theepan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox