[LARTC] Create router?

[LARTC] Create router?

[Chuanbo Xu]

hi,

There is a subnet with 172.16.0.0/16. 

A Linux server: 
eth1:172.16.1.1	connect subnet
eth0:xxx.xxx.xxx.xxx connect with Internet

I want to subnet via this server connect with Internet. How do with iproute2?
Please state detailedly.

Thanks.


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

Re: [LARTC] Create router?

[Wingtung.Leung]

On Fri, 8 Jun 2001, Chuanbo Xu wrote:

> There is a subnet with 172.16.0.0/16.
>
> A Linux server:
> eth1:172.16.1.1	connect subnet
> eth0:xxx.xxx.xxx.xxx connect with Internet
>
> I want to subnet via this server connect with Internet. How do with iproute2?
> Please state detailedly.

If you want to connect a entire private subnet to the internet, read the
Linux Masquerading HOWTO. If it is not a private subnet (forgive me, I
don't know all the numbers by hard), just enable routing at the Linux box
and everything will work fine.

If you have further problems, please state them detailedly. ;-p




_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/