From: "M.F. PSIkappa" <psi@platon.atlantis.sk>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Unnumbered
Date: Fri, 22 Jun 2001 08:31:04 +0000 [thread overview]
Message-ID: <marc-lartc-99319875114308@msgid-missing> (raw)
In-Reply-To: <marc-lartc-99319611106908@msgid-missing>
On Fri, 22 Jun 2001, Arthur van Leeuwen wrote:
> On Fri, 22 Jun 2001, M.F. PSIkappa wrote:
>
>
> > it's posibility to make something similar to Cisco unnumber on Linux ?
> > E. g.
> > interface Serial0
> > ip unnumbered Ethernet0
> > I don't want to assign to interface private IP.
>
> If I understand the ip unnumbered command correctly it allows you to share a
> single IP address on multiple interfaces. This is trivial on Linux: just add
> the same IP address to each of the interfaces with ip addr add
>
> The routing effects I cannot correctly comment on, as I'm not sufficiently
> versed in IOS to fully grasp the effects of ip unnumbered
No, it's incorrect, unnumberd allow you to connect 2 router without IP
adresses.
192.168.0.1/24 [cisco]unnumbered-----unnumberd[cisco] 192.168.2.1/24
It's special case of point-to-point connection. In linux if I make
point-to-point connection I have to assign any IP on both endpoint of
connection.
> Doei, Arthur.
PSIkappa
psi@atlantis.sk
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
next prev parent reply other threads:[~2001-06-22 8:31 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-06-22 7:47 [LARTC] Unnumbered M.F. PSIkappa
2001-06-22 8:00 ` Arthur van Leeuwen
2001-06-22 8:31 ` M.F. PSIkappa [this message]
2001-06-22 8:34 ` Arthur van Leeuwen
2001-06-22 8:55 ` M.F. PSIkappa
2001-06-22 8:55 ` Jasper Spaans
2001-06-22 8:59 ` Dmytro O. Redchuk
2001-06-22 9:00 ` Arthur van Leeuwen
2001-06-22 16:37 ` Greg Varga
2001-06-22 16:55 ` Ramin Alidousti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-99319875114308@msgid-missing \
--to=psi@platon.atlantis.sk \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox