Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
From: "Dmytro O. Redchuk" <d.redchuk@popnet.kiev.ua>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Unnumbered
Date: Fri, 22 Jun 2001 08:59:06 +0000	[thread overview]
Message-ID: <marc-lartc-99320043219405@msgid-missing> (raw)
In-Reply-To: <marc-lartc-99319611106908@msgid-missing>

On Fri, Jun 22, 2001 at 10:34:37AM +0200, Arthur van Leeuwen wrote:
> On Fri, 22 Jun 2001, M.F. PSIkappa wrote:
> 
> > On Fri, 22 Jun 2001, Arthur van Leeuwen wrote:
> >
> > > On Fri, 22 Jun 2001, M.F. PSIkappa wrote:
> > >
> > >
> > > > it's posibility to make something similar to Cisco unnumber on Linux ?
> > > > E. g.
> > > > interface Serial0
> > > >  ip unnumbered Ethernet0
> > > > I don't want to assign to interface private IP.
> > >
> > > If I understand the ip unnumbered command correctly it allows you to share a
> > > single IP address on multiple interfaces. This is trivial on Linux: just add
> > > the same IP address to each of the interfaces with  ip addr add
> > >
> > > The routing effects I cannot correctly comment on, as I'm not sufficiently
> > > versed in IOS to fully grasp the effects of  ip unnumbered
> >
> > No, it's incorrect, unnumberd allow you to connect 2 router without IP
> > adresses.
> >
> > 192.168.0.1/24 [cisco]unnumbered-----unnumberd[cisco] 192.168.2.1/24
> >
> > It's special case of point-to-point connection. In linux if I make
> > point-to-point connection I have to assign any IP on both endpoint of
> > connection.
> 
> What is the difference with
> 
> 192.168.0.1/24 [linux] 192.168.0.1 ------- 192.168.2.1 [linux] 192.168.2.1/24
> 
> if I may be so bold to ask? Yes, the routing effects may be different, and I
> mentioned that might be a problem, but the unnumbered thing looks like a
> cisco-specific hack...

Sorry, it doesnt look so -- as far as i know unnumbered interfaces (PtoP connections) are supported by a number of vendors.
Having a possibility to create unnumbered links under Linux would be nice, imho.

> 
> Doei, Arthur.
> 
> -- 
>   /\    / |      arthurvl@sci.kun.nl      | Work like you don't need the money
>  /__\  /  | A friend is someone with whom | Love like you have never been hurt
> /    \/__ | you can dare to be yourself   | Dance like there's nobody watching
> 
> 
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

-- 
Dmytro O. Redchuk                 http://www.popnet.kiev.ua
System Administrator              Phone: (380).44.495.26.05
PopNet Kommunikation Kiew         Fax  : (380).44.495.26.02


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

  parent reply	other threads:[~2001-06-22  8:59 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-06-22  7:47 [LARTC] Unnumbered M.F. PSIkappa
2001-06-22  8:00 ` Arthur van Leeuwen
2001-06-22  8:31 ` M.F. PSIkappa
2001-06-22  8:34 ` Arthur van Leeuwen
2001-06-22  8:55 ` M.F. PSIkappa
2001-06-22  8:55 ` Jasper Spaans
2001-06-22  8:59 ` Dmytro O. Redchuk [this message]
2001-06-22  9:00 ` Arthur van Leeuwen
2001-06-22 16:37 ` Greg Varga
2001-06-22 16:55 ` Ramin Alidousti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-lartc-99320043219405@msgid-missing \
    --to=d.redchuk@popnet.kiev.ua \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox