* Error compiling
@ 2003-07-17 18:20 Javier Sedano
2003-07-17 21:42 ` Riley Williams
0 siblings, 1 reply; 7+ messages in thread
From: Javier Sedano @ 2003-07-17 18:20 UTC (permalink / raw)
To: elks
Hi all,
after a few months forgetting about elks, I'm trying to install it again.
I've got two questions:
1) The latest version available in the web page is 0.1.1, but this
mailing list speaks of other newer versions... aren't hey packtized?
2) Version 0.1.1 gives me the next error:
jsedano@taran:~/elks/elks-0.1.1> make Image
Q> #define UTS_VERSION "#0.1.1?Thu Jul 17 20:14:02 CEST 2003"
make -C kernel kernel.a
make[1]: Entering directory `/home/jsedano/elks/elks-0.1.1/kernel'
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o sched.o sched.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o printk.o printk.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o sleepwake.o sleepwake.c bcc -0 -i -O
-I/home/jsedano/elks/elks-0.1.1/include -DELKS_VERSION_CODE=0x00010100
-DUTS_RELEASE=\"0.1.1\" -D__KERNEL__ -ansi -c -o dma.o dma.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o version.o version.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o sys.o sys.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o stubs.o stubs.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o fork.o fork.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o exit.o exit.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o time.o time.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o signal.o signal.c
ar rcs kernel.a sched.o printk.o sleepwake.o dma.o version.o sys.o
stubs.o fork.o exit.o time.o signal.o
make[1]: Leaving directory `/home/jsedano/elks/elks-0.1.1/kernel'
make -C fs fs.a
make[1]: Entering directory `/home/jsedano/elks/elks-0.1.1/fs'
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o super.o super.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o bufops.o bufops.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o devices.o devices.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o fcntl.o fcntl.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o stat.o stat.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o inode.o inode.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o file_table.o file_table.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o buffer.o buffer.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o block_dev.o block_dev.c bcc -0 -i -O
-I/home/jsedano/elks/elks-0.1.1/include -DELKS_VERSION_CODE=0x00010100
-DUTS_RELEASE=\"0.1.1\" -D__KERNEL__ -ansi -c -o namei.o namei.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o ioctl.o ioctl.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o filesystems.o filesystems.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o open.o open.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o read_write.o read_write.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o readdir.o readdir.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o exec.o exec.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o select.o select.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o pipe.o pipe.c
ar rcs fs.a super.o bufops.o devices.o fcntl.o stat.o inode.o
file_table.o buffer.o block_dev.o namei.o ioctl.o filesystems.o open.o
read_write.o readdir.o exec.o select.o pipe.o
make[1]: Leaving directory `/home/jsedano/elks/elks-0.1.1/fs'
make -C lib lib.a
make[1]: Entering directory `/home/jsedano/elks/elks-0.1.1/lib'
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o chqueue.o chqueue.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o string.o string.c
ar rcs lib.a chqueue.o string.o
sync
make[1]: Leaving directory `/home/jsedano/elks/elks-0.1.1/lib'
make -C net net.a
make[1]: Entering directory `/home/jsedano/elks/elks-0.1.1/net'
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o socket.o socket.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o protocols.o protocols.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o ipv4/af_inet.o ipv4/af_inet.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o nano/af_nano.o nano/af_nano.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o unix/af_unix.o unix/af_unix.c
ar rcs net.a socket.o protocols.o ipv4/af_inet.o nano/af_nano.o
unix/af_unix.o
make[1]: Leaving directory `/home/jsedano/elks/elks-0.1.1/net'
make -C fs/minix minixfs.a
make[1]: Entering directory `/home/jsedano/elks/elks-0.1.1/fs/minix'
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o bitmap.o bitmap.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o dir.o dir.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o file.o file.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o namei.o namei.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o symlink.o symlink.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o truncate.o truncate.c
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o inode.o inode.c
ar rcs minixfs.a bitmap.o dir.o file.o namei.o symlink.o truncate.o inode.o
make[1]: Leaving directory `/home/jsedano/elks/elks-0.1.1/fs/minix'
bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__
-ansi -c -o init/main.o init/main.c
make -C arch/i86 Image
make[1]: Entering directory `/home/jsedano/elks/elks-0.1.1/arch/i86'
make -C tools all
make[2]: Entering directory `/home/jsedano/elks/elks-0.1.1/arch/i86/tools'
gcc -I ../../../include -o build build.c
gcc -I ../../../include -o mkurlader mkurlader.c
make[2]: Leaving directory `/home/jsedano/elks/elks-0.1.1/arch/i86/tools'
gcc -E -traditional -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__ -o
boot/bootsect.s boot/bootsect.S
as86 -0 -o boot/bootsect.o boot/bootsect.s
ld86 -0 -s -o boot/bootsect -M boot/bootsect.o > Boot.map
gcc -E -traditional -I/home/jsedano/elks/elks-0.1.1/include
-DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" -D__KERNEL__ -o
boot/setup.s boot/setup.S
boot/setup.S:588: macro names must be identifiers
make[1]: *** [boot/setup.s] Error 1
make[1]: Leaving directory `/home/jsedano/elks/elks-0.1.1/arch/i86'
make: *** [Image] Error 2
jsedano@taran:~/elks/elks-0.1.1>
Any idea?
Regards,
--
Javier Sedano Jarillo: javier.sedano@agora-2000.com
(http://www.it.uc3m.es/~jsedano)
Network&Systems Engineer
Agora Systems, S.A.
C/Aravaca 12
E-28040 Madrid (Spain)
Tel.: +34 91 533 58 57
Fax.: +34 91 534 84 77
--------
Si la libertad de expresion significa algo, es el poder decir lo que los
demas no quieren oir.
^ permalink raw reply [flat|nested] 7+ messages in thread* RE: Error compiling
2003-07-17 18:20 Error compiling Javier Sedano
@ 2003-07-17 21:42 ` Riley Williams
2003-07-18 12:04 ` Javier Sedano
0 siblings, 1 reply; 7+ messages in thread
From: Riley Williams @ 2003-07-17 21:42 UTC (permalink / raw)
To: Javier Sedano, elks
Hi Javier.
* Nothing as pretty as a smile, nothing as ugly as a frown.
> After a few months forgetting about elks, I'm trying to install
> it again. I've got two questions:
>
> 1) The latest version available in the web page is 0.1.1, but
> this mailing list speaks of other newer versions... aren't
> they packtized?
Not yet, but 0.1.3-pre1 shortly will be. The releases on the ELKS
website can easily lag behind those being used since those with the
abilities to create releases are also the busiest of the developers.
The best way to obtain the current code is using CVS with commands
like the following...
export CVS_RSH=`which ssh`
CVSROOT=:pserver:anonymous@cvs.elks.sf.net:/cvsroot/elks
cvs -d $CVSROOT get elks elkscmd elksnet elksutils
...which will download the current code base for all four packages,
and will drop it under the current directory.
> 2) Version 0.1.1 gives me the next error:
>
> jsedano@taran:~/elks/elks-0.1.1> make Image
> Q> #define UTS_VERSION "#0.1.1?Thu Jul 17 20:14:02 CEST 2003"
=====8<===== CUT =====>8=====
> bcc -0 -i -O -I/home/jsedano/elks/elks-0.1.1/include \
> -DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" \
> -D__KERNEL__ -ansi -c -o init/main.o init/main.c
> make -C arch/i86 Image
> make[1]: Entering directory `/home/jsedano/elks/elks-0.1.1/arch/i86'
=====8<===== CUT =====>8=====
> gcc -E -traditional -I/home/jsedano/elks/elks-0.1.1/include \
> -DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" \
> -D__KERNEL__ -o boot/bootsect.s boot/bootsect.S
> as86 -0 -o boot/bootsect.o boot/bootsect.s
> ld86 -0 -s -o boot/bootsect -M boot/bootsect.o > Boot.map
> gcc -E -traditional -I/home/jsedano/elks/elks-0.1.1/include \
> -DELKS_VERSION_CODE=0x00010100 -DUTS_RELEASE=\"0.1.1\" \
> -D__KERNEL__ -o boot/setup.s boot/setup.S
> boot/setup.S:588: macro names must be identifiers
> make[1]: *** [boot/setup.s] Error 1
> make[1]: Leaving directory `/home/jsedano/elks/elks-0.1.1/arch/i86'
> make: *** [Image] Error 2
> jsedano@taran:~/elks/elks-0.1.1>
I'm not sure what that bug was, but it doesn't appear to be present
in the current CVS version which is 0.1.3-pre1 so has presumably been
fixed in the meantime.
Best wishes from Riley.
---
* Nothing as pretty as a smile, nothing as ugly as a frown.
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.501 / Virus Database: 299 - Release Date: 14-Jul-2003
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: Error compiling
2003-07-17 21:42 ` Riley Williams
@ 2003-07-18 12:04 ` Javier Sedano
2003-07-18 13:22 ` Paul Nasrat
0 siblings, 1 reply; 7+ messages in thread
From: Javier Sedano @ 2003-07-18 12:04 UTC (permalink / raw)
To: Riley Williams, elks
Riley Williams wrote:
> Hi Javier.
>
>
> I'm not sure what that bug was, but it doesn't appear to be present
> in the current CVS version which is 0.1.3-pre1 so has presumably been
> fixed in the meantime.
>
Bad news: it also happens in the latests cvs snap. Maybe of a wrong
dev86 version?
jsedano@taran:~> dpkg -l | grep bcc
ii bcc 0.16.3-2 16-bit C compiler
jsedano@taran:~> dpkg -l | grep elks
ii elks-libc 0.16.3-2 16-bit C library and include files
jsedano@taran:~>
--
Javier Sedano Jarillo: javier.sedano@agora-2000.com
(http://www.it.uc3m.es/~jsedano)
Network&Systems Engineer
Agora Systems, S.A.
C/Aravaca 12
E-28040 Madrid (Spain)
Tel.: +34 91 533 58 57
Fax.: +34 91 534 84 77
--------
There are 11 classes of people in the worls: the one knowing about
binary numbers and the one not knowing it.
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: Error compiling
2003-07-18 12:04 ` Javier Sedano
@ 2003-07-18 13:22 ` Paul Nasrat
2003-07-18 15:55 ` Javier Sedano
0 siblings, 1 reply; 7+ messages in thread
From: Paul Nasrat @ 2003-07-18 13:22 UTC (permalink / raw)
To: Javier Sedano; +Cc: Riley Williams, elks
On Fri, Jul 18, 2003 at 02:04:18PM +0200, Javier Sedano wrote:
> Bad news: it also happens in the latests cvs snap. Maybe of a wrong
> dev86 version?
>
> jsedano@taran:~> dpkg -l | grep bcc
> ii bcc 0.16.3-2 16-bit C compiler
> jsedano@taran:~> dpkg -l | grep elks
> ii elks-libc 0.16.3-2 16-bit C library and include files
> jsedano@taran:~>
Gad, 0.16.3 has the CPP in (experimental) try 0.16.0 or 0.15.x.
Paul
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Error compiling
2003-07-18 13:22 ` Paul Nasrat
@ 2003-07-18 15:55 ` Javier Sedano
2003-07-21 15:19 ` Javier Sedano
2003-07-22 10:16 ` Johannes Lundberg
0 siblings, 2 replies; 7+ messages in thread
From: Javier Sedano @ 2003-07-18 15:55 UTC (permalink / raw)
To: Paul Nasrat; +Cc: Riley Williams, elks
Hi,
Paul Nasrat wrote:
> On Fri, Jul 18, 2003 at 02:04:18PM +0200, Javier Sedano wrote:
>
> Gad, 0.16.3 has the CPP in (experimental) try 0.16.0 or 0.15.x.
>
Nopes. I also did so, and nothing solved.
I think the problem is related to the gcc version used in debian testing.
The default gcc version is 3.3, but 2.95 is also installed. Forcing it
to use 2.95 seems to compile (althoug it still does not boot)
Regards,
--
Javier Sedano Jarillo: javier.sedano@agora-2000.com
(http://www.it.uc3m.es/~jsedano)
Network&Systems Engineer
Agora Systems, S.A.
C/Aravaca 12
E-28040 Madrid (Spain)
Tel.: +34 91 533 58 57
Fax.: +34 91 534 84 77
--------
?Por que pelear por poseer las montanas, si cuando de nosotros no quede
ni el recuerdo, y otras generaciones sigan matandose para conseguirlas,
ellas seguiran ahi, riendose del hombre? Proverbio apache
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: Error compiling
2003-07-18 15:55 ` Javier Sedano
@ 2003-07-21 15:19 ` Javier Sedano
2003-07-22 10:16 ` Johannes Lundberg
1 sibling, 0 replies; 7+ messages in thread
From: Javier Sedano @ 2003-07-21 15:19 UTC (permalink / raw)
To: elks; +Cc: Paul Nasrat, Riley Williams
Hi,
Javier Sedano wrote:
> Hi,
>
> I think the problem is related to the gcc version used in debian
> testing. The default gcc version is 3.3, but 2.95 is also installed.
> Forcing it to use 2.95 seems to compile (althoug it still does not boot)
>
Aha! So changing gcc to gcc-2.95 in Makefile-rules in the elks tree seems
to solve the compilation problem. It compiles... but does not run. I've
got what seems to be a dump of AX, BX, CX, DX registers, scrolling
quickly through the screen.
I am actually trying to run elks in vmware. The first step was to
download the Images.zip tarball and use it. It works... more or less ;-)
The comb image boots without problems, and I can even log in and play.
The boot/root image does not work; it causes the same error than my
home-compiled kernel.
So there seems to be any configuration option which makes elks not
runable under vmware. Does someone have a .config file for the boot
image and another one for the comb image, to look for the diference?
Any other idea?
Regards,
--
Javier Sedano Jarillo: javier.sedano@agora-2000.com
(http://www.it.uc3m.es/~jsedano)
Network&Systems Engineer
Agora Systems, S.A.
C/Aravaca 12
E-28040 Madrid (Spain)
Tel.: +34 91 533 58 57
Fax.: +34 91 534 84 77
--------
Any sufficiently advanced technology is indistinguishable from magic.
Arthur C. Clarke
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: Error compiling
2003-07-18 15:55 ` Javier Sedano
2003-07-21 15:19 ` Javier Sedano
@ 2003-07-22 10:16 ` Johannes Lundberg
1 sibling, 0 replies; 7+ messages in thread
From: Johannes Lundberg @ 2003-07-22 10:16 UTC (permalink / raw)
To: Javier Sedano; +Cc: elks
> I think the problem is related to the gcc version used in debian testing.
> The default gcc version is 3.3, but 2.95 is also installed. Forcing it
> to use 2.95 seems to compile (althoug it still does not boot)
Same thing here on Debian GNU/Linux unstable about gcc and dev86 0.16.11.
Though, using dev86 0.16.0 gives me a working kernel.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2003-07-22 10:16 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-07-17 18:20 Error compiling Javier Sedano
2003-07-17 21:42 ` Riley Williams
2003-07-18 12:04 ` Javier Sedano
2003-07-18 13:22 ` Paul Nasrat
2003-07-18 15:55 ` Javier Sedano
2003-07-21 15:19 ` Javier Sedano
2003-07-22 10:16 ` Johannes Lundberg
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox