[PATCH 12/16] pwm: crc: Implement get_state() method

[Hans de Goede <hdegoede@redhat.com>]

Implement the pwm_ops.get_state() method to complete the support for the
new atomic PWM API.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/pwm/pwm-crc.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/pwm/pwm-crc.c b/drivers/pwm/pwm-crc.c
index 58c7e9ef7278..6c75a3470bc8 100644
--- a/drivers/pwm/pwm-crc.c
+++ b/drivers/pwm/pwm-crc.c
@@ -114,8 +114,37 @@ static int crc_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	return 0;
 }
 
+static void crc_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			       struct pwm_state *state)
+{
+	struct crystalcove_pwm *crc_pwm = to_crc_pwm(chip);
+	struct device *dev = crc_pwm->chip.dev;
+	unsigned int clk_div, clk_div_reg, duty_cycle_reg;
+	int error;
+
+	error = regmap_read(crc_pwm->regmap, PWM0_CLK_DIV, &clk_div_reg);
+	if (error) {
+		dev_err(dev, "Error reading PWM0_CLK_DIV %d\n", error);
+		return;
+	}
+
+	error = regmap_read(crc_pwm->regmap, PWM0_DUTY_CYCLE, &duty_cycle_reg);
+	if (error) {
+		dev_err(dev, "Error reading PWM0_DUTY_CYCLE %d\n", error);
+		return;
+	}
+
+	clk_div = (clk_div_reg & ~PWM_OUTPUT_ENABLE) + 1;
+
+	state->period     = clk_div * NSEC_PER_MHZ * 256 / PWM_BASE_CLK_MHZ;
+	state->duty_cycle = duty_cycle_reg * state->period / PWM_MAX_LEVEL;
+	state->polarity   = PWM_POLARITY_NORMAL;
+	state->enabled    = !!(clk_div_reg & PWM_OUTPUT_ENABLE);
+}
+
 static const struct pwm_ops crc_pwm_ops = {
 	.apply = crc_pwm_apply,
+	.get_state = crc_pwm_get_state,
 };
 
 static int crystalcove_pwm_probe(struct platform_device *pdev)
-- 
2.26.2