From: Dave Jiang <dave.jiang@intel.com>
To: linux-acpi@vger.kernel.org, linux-cxl@vger.kernel.org
Cc: rafael@kernel.org, tony.luck@intel.com, bp@alien8.de,
guohanjun@huawei.com, mchehab@kernel.org,
xueshuai@linux.alibaba.com, terry.bowman@amd.com,
sashiko-bot@kernel.org
Subject: [PATCH v3 05/10] ACPI: extlog: Validate PCIe error section length before payload access
Date: Fri, 17 Jul 2026 09:16:42 -0700 [thread overview]
Message-ID: <20260717161647.1493259-6-dave.jiang@intel.com> (raw)
In-Reply-To: <20260717161647.1493259-1-dave.jiang@intel.com>
sashiko-bot flagged the missing section-length check before
extlog_print_pcie() touches the PCIe payload.
extlog_print_pcie() reads pcie_err->validation_bits and device_id and
copies the 96-byte aer_info buffer without checking that
gdata->error_data_length is large enough for a struct cper_sec_pcie.
cper_estatus_check() keeps the read within the estatus block, but a
short section still lets stale adjacent bytes be treated as PCIe error
data. Reject a section too small to hold the record before touching any
field.
Reported-by: sashiko-bot@kernel.org
Fixes: e778ffefa34d ("ACPI: extlog: Trace CPER PCI Express Error Section")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
---
drivers/acpi/acpi_extlog.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/acpi_extlog.c b/drivers/acpi/acpi_extlog.c
index fbc88c584c06..0c440d75d9a7 100644
--- a/drivers/acpi/acpi_extlog.c
+++ b/drivers/acpi/acpi_extlog.c
@@ -134,7 +134,7 @@ static int print_extlog_rcd(const char *pfx,
}
static void extlog_print_pcie(struct cper_sec_pcie *pcie_err,
- int severity)
+ int severity, u32 len)
{
#ifdef ACPI_APEI_PCIEAER
struct aer_capability_regs aer_regs = {};
@@ -145,6 +145,9 @@ static void extlog_print_pcie(struct cper_sec_pcie *pcie_err,
int aer_severity;
int domain;
+ if (len < sizeof(*pcie_err))
+ return;
+
if (!(pcie_err->validation_bits & CPER_PCIE_VALID_DEVICE_ID &&
pcie_err->validation_bits & CPER_PCIE_VALID_AER_INFO))
return;
@@ -247,7 +250,8 @@ static int extlog_print(struct notifier_block *nb, unsigned long val,
} else if (guid_equal(sec_type, &CPER_SEC_PCIE)) {
struct cper_sec_pcie *pcie_err = acpi_hest_get_payload(gdata);
- extlog_print_pcie(pcie_err, gdata->error_severity);
+ extlog_print_pcie(pcie_err, gdata->error_severity,
+ gdata->error_data_length);
} else {
void *err = acpi_hest_get_payload(gdata);
--
2.55.0
next prev parent reply other threads:[~2026-07-17 16:16 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-17 16:16 [PATCH v3 00/10] ACPI: APEI: GHES: Collection of fixes for issues reported by sashiko Dave Jiang
2026-07-17 16:16 ` [PATCH v3 01/10] ACPI: APEI: GHES: Bound CXL event record copy to the firmware section length Dave Jiang
2026-07-17 16:16 ` [PATCH v3 02/10] efi/cper: Reject CPER records with an out-of-range error_data_length Dave Jiang
2026-07-17 16:16 ` [PATCH v3 03/10] ACPI: APEI: GHES: Validate CXL protocol error section length before RAS cap copy Dave Jiang
2026-07-17 16:16 ` [PATCH v3 04/10] ACPI: extlog: Avoid populating software AER metadata from raw hardware buffer Dave Jiang
2026-07-17 16:16 ` Dave Jiang [this message]
2026-07-17 16:16 ` [PATCH v3 06/10] ACPI: extlog: Defer CXL protocol error handling to avoid lock inversion Dave Jiang
2026-07-17 16:16 ` [PATCH v3 07/10] ACPI: extlog: Fix CONFIG_ACPI_APEI_PCIEAER guard typo Dave Jiang
2026-07-17 21:24 ` Dave Jiang
2026-07-17 16:16 ` [PATCH v3 08/10] ACPI: APEI: GHES: Validate memory error section length before payload access Dave Jiang
2026-07-17 16:16 ` [PATCH v3 09/10] ACPI: APEI: GHES: Bound AER info copy and sanitize software metadata Dave Jiang
2026-07-17 16:16 ` [PATCH v3 10/10] ACPI: extlog: Validate elog record length before walking sections Dave Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260717161647.1493259-6-dave.jiang@intel.com \
--to=dave.jiang@intel.com \
--cc=bp@alien8.de \
--cc=guohanjun@huawei.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rafael@kernel.org \
--cc=sashiko-bot@kernel.org \
--cc=terry.bowman@amd.com \
--cc=tony.luck@intel.com \
--cc=xueshuai@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox