[PATCH 00/11] ACPICA: Upstream changes since ACPICA 20220331

[PATCH 00/11] ACPICA: Upstream changes since ACPICA 20220331

[Rafael J. Wysocki]

Hi All,

This series of patches represents upstream ACPICA changes committed since the
20220331 release, as available from https://github.com/acpica/acpica, except
for the patches that have been applied to the Linux kernel already and one
commit that was reverted from the upstream ACPICA.

It contains the following material:

Alison Schofield (1):
      ACPICA: Add CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table

Bob Moore (3):
      ACPICA: Add a couple of new UUIDs to the known UUID list
      ACPICA: Improve warning message for "invalid ACPI name".
      ACPICA: Finish support for the CDAT table

Huacai Chen (2):
      ACPICA: MADT: Add loong_arch-specific APICs support
      ACPICA: Events: Support fixed pcie wake event

Kuppuswamy Sathyanarayanan (1):
      ACPICA: iASL: Add CCEL table to both compiler/disassembler

Robin Murphy (1):
      ACPICA: IORT: Update for revision E.e

Sudeep Holla (1):
      ACPICA: Add support for FFH Opregion special context data

Vit Kabele (2):
      ACPICA: Check that EBDA pointer is in valid memory
      ACPICA: Do not touch VGA memory when EBDA < 1ki_b

Thanks!

[PATCH 01/11] ACPICA: MADT: Add loong_arch-specific APICs support

[Rafael J. Wysocki]

From: Huacai Chen <chenhuacai@loongson.cn>

ACPICA commit 1dc530059a3e6202e941e6a9478cf30f092bfb47

loong_arch-specific interrupt controllers (similar to APIC) are added
in the next revision of ACPI Specification (current revision is 6.4),
which including CORE_PIC (CPUINTC), LIO_PIC (LIOINTC), EIO_PIC (EIOINTC),
HT_PIC (HTVECINTC), BIO_PIC (PCHINTC), LPC_PIC (PCHLPC) and MSI_PIC
(PCHMSI). This patch add their definition.

ACPI changes of loong_arch-specific interrupt controllers have already
been approved in the ECRs, and will be public in the next revision of
ACPI Specification.

Link: https://github.com/acpica/acpica/commit/1dc53005
Reference: https://mantis.uefi.org/mantis/view.php?id=2203
Reference: https://mantis.uefi.org/mantis/view.php?id=2313
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 include/acpi/actbl2.h |  139 +++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 137 insertions(+), 2 deletions(-)

Index: linux-pm/include/acpi/actbl2.h
===================================================================
--- linux-pm.orig/include/acpi/actbl2.h
+++ linux-pm/include/acpi/actbl2.h
@@ -865,7 +865,14 @@ enum acpi_madt_type {
 	ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR = 14,
 	ACPI_MADT_TYPE_GENERIC_TRANSLATOR = 15,
 	ACPI_MADT_TYPE_MULTIPROC_WAKEUP = 16,
-	ACPI_MADT_TYPE_RESERVED = 17,	/* 17 to 0x7F are reserved */
+	ACPI_MADT_TYPE_CORE_PIC = 17,
+	ACPI_MADT_TYPE_LIO_PIC = 18,
+	ACPI_MADT_TYPE_HT_PIC = 19,
+	ACPI_MADT_TYPE_EIO_PIC = 20,
+	ACPI_MADT_TYPE_MSI_PIC = 21,
+	ACPI_MADT_TYPE_BIO_PIC = 22,
+	ACPI_MADT_TYPE_LPC_PIC = 23,
+	ACPI_MADT_TYPE_RESERVED = 24,	/* 24 to 0x7F are reserved */
 	ACPI_MADT_TYPE_OEM_RESERVED = 0x80	/* 0x80 to 0xFF are reserved for OEM use */
 };
 
@@ -1096,7 +1103,135 @@ struct acpi_madt_multiproc_wakeup_mailbo
 
 #define ACPI_MP_WAKE_COMMAND_WAKEUP    1
 
-/* 17: OEM data */
+/* 17: CPU Core Interrupt Controller (ACPI 6.5) */
+
+struct acpi_madt_core_pic {
+	struct acpi_subtable_header header;
+	u8 version;
+	u32 processor_id;
+	u32 core_id;
+	u32 flags;
+};
+
+/* Values for Version field above */
+
+enum acpi_madt_core_pic_version {
+	ACPI_MADT_CORE_PIC_VERSION_NONE = 0,
+	ACPI_MADT_CORE_PIC_VERSION_V1 = 1,
+	ACPI_MADT_CORE_PIC_VERSION_RESERVED = 2	/* 2 and greater are reserved */
+};
+
+/* 18: Legacy I/O Interrupt Controller (ACPI 6.5) */
+
+struct acpi_madt_lio_pic {
+	struct acpi_subtable_header header;
+	u8 version;
+	u64 address;
+	u16 size;
+	u8 cascade[2];
+	u32 cascade_map[2];
+};
+
+/* Values for Version field above */
+
+enum acpi_madt_lio_pic_version {
+	ACPI_MADT_LIO_PIC_VERSION_NONE = 0,
+	ACPI_MADT_LIO_PIC_VERSION_V1 = 1,
+	ACPI_MADT_LIO_PIC_VERSION_RESERVED = 2	/* 2 and greater are reserved */
+};
+
+/* 19: HT Interrupt Controller (ACPI 6.5) */
+
+struct acpi_madt_ht_pic {
+	struct acpi_subtable_header header;
+	u8 version;
+	u64 address;
+	u16 size;
+	u8 cascade[8];
+};
+
+/* Values for Version field above */
+
+enum acpi_madt_ht_pic_version {
+	ACPI_MADT_HT_PIC_VERSION_NONE = 0,
+	ACPI_MADT_HT_PIC_VERSION_V1 = 1,
+	ACPI_MADT_HT_PIC_VERSION_RESERVED = 2	/* 2 and greater are reserved */
+};
+
+/* 20: Extend I/O Interrupt Controller (ACPI 6.5) */
+
+struct acpi_madt_eio_pic {
+	struct acpi_subtable_header header;
+	u8 version;
+	u8 cascade;
+	u8 node;
+	u64 node_map;
+};
+
+/* Values for Version field above */
+
+enum acpi_madt_eio_pic_version {
+	ACPI_MADT_EIO_PIC_VERSION_NONE = 0,
+	ACPI_MADT_EIO_PIC_VERSION_V1 = 1,
+	ACPI_MADT_EIO_PIC_VERSION_RESERVED = 2	/* 2 and greater are reserved */
+};
+
+/* 21: MSI Interrupt Controller (ACPI 6.5) */
+
+struct acpi_madt_msi_pic {
+	struct acpi_subtable_header header;
+	u8 version;
+	u64 msg_address;
+	u32 start;
+	u32 count;
+};
+
+/* Values for Version field above */
+
+enum acpi_madt_msi_pic_version {
+	ACPI_MADT_MSI_PIC_VERSION_NONE = 0,
+	ACPI_MADT_MSI_PIC_VERSION_V1 = 1,
+	ACPI_MADT_MSI_PIC_VERSION_RESERVED = 2	/* 2 and greater are reserved */
+};
+
+/* 22: Bridge I/O Interrupt Controller (ACPI 6.5) */
+
+struct acpi_madt_bio_pic {
+	struct acpi_subtable_header header;
+	u8 version;
+	u64 address;
+	u16 size;
+	u16 id;
+	u16 gsi_base;
+};
+
+/* Values for Version field above */
+
+enum acpi_madt_bio_pic_version {
+	ACPI_MADT_BIO_PIC_VERSION_NONE = 0,
+	ACPI_MADT_BIO_PIC_VERSION_V1 = 1,
+	ACPI_MADT_BIO_PIC_VERSION_RESERVED = 2	/* 2 and greater are reserved */
+};
+
+/* 23: LPC Interrupt Controller (ACPI 6.5) */
+
+struct acpi_madt_lpc_pic {
+	struct acpi_subtable_header header;
+	u8 version;
+	u64 address;
+	u16 size;
+	u8 cascade;
+};
+
+/* Values for Version field above */
+
+enum acpi_madt_lpc_pic_version {
+	ACPI_MADT_LPC_PIC_VERSION_NONE = 0,
+	ACPI_MADT_LPC_PIC_VERSION_V1 = 1,
+	ACPI_MADT_LPC_PIC_VERSION_RESERVED = 2	/* 2 and greater are reserved */
+};
+
+/* 80: OEM data */
 
 struct acpi_madt_oem_data {
 	u8 oem_data[0];

[PATCH 02/11] ACPICA: Events: Support fixed PCIe wake event

[Rafael J. Wysocki]

From: Huacai Chen <chenhuacai@loongson.cn>

ACPICA commit 32d875705c8ee8f99fd8b78dbed48633486a7640

Some chipsets (such as Loongson's LS7A) support fixed pcie wake event
which is defined in the PM1 block(related description can be found in
4.8.4.1.1 PM1 Status Registers, 4.8.4.2.1 PM1 Control Registers and
5.2.9 Fixed ACPI Description Table (FADT)), so we add code to handle it.

Link: https://uefi.org/specifications/ACPI/6.4/
Link: https://github.com/acpica/acpica/commit/32d87570
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/acpi/acpica/evevent.c  |   11 +++++++++++
 drivers/acpi/acpica/hwsleep.c  |   14 ++++++++++++++
 drivers/acpi/acpica/utglobal.c |    4 ++++
 include/acpi/actypes.h         |    3 ++-
 4 files changed, 31 insertions(+), 1 deletion(-)

Index: linux-pm/drivers/acpi/acpica/evevent.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/evevent.c
+++ linux-pm/drivers/acpi/acpica/evevent.c
@@ -142,6 +142,9 @@ static acpi_status acpi_ev_fixed_event_i
 			status =
 			    acpi_write_bit_register(acpi_gbl_fixed_event_info
 						    [i].enable_register_id,
+						    (i ==
+						     ACPI_EVENT_PCIE_WAKE) ?
+						    ACPI_ENABLE_EVENT :
 						    ACPI_DISABLE_EVENT);
 			if (ACPI_FAILURE(status)) {
 				return (status);
@@ -185,6 +188,11 @@ u32 acpi_ev_fixed_event_detect(void)
 		return (int_status);
 	}
 
+	if (fixed_enable & ACPI_BITMASK_PCIEXP_WAKE_DISABLE)
+		fixed_enable &= ~ACPI_BITMASK_PCIEXP_WAKE_DISABLE;
+	else
+		fixed_enable |= ACPI_BITMASK_PCIEXP_WAKE_DISABLE;
+
 	ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS,
 			  "Fixed Event Block: Enable %08X Status %08X\n",
 			  fixed_enable, fixed_status));
@@ -250,6 +258,9 @@ static u32 acpi_ev_fixed_event_dispatch(
 	if (!acpi_gbl_fixed_event_handlers[event].handler) {
 		(void)acpi_write_bit_register(acpi_gbl_fixed_event_info[event].
 					      enable_register_id,
+					      (event ==
+					       ACPI_EVENT_PCIE_WAKE) ?
+					      ACPI_ENABLE_EVENT :
 					      ACPI_DISABLE_EVENT);
 
 		ACPI_ERROR((AE_INFO,
Index: linux-pm/drivers/acpi/acpica/hwsleep.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/hwsleep.c
+++ linux-pm/drivers/acpi/acpica/hwsleep.c
@@ -311,6 +311,20 @@ acpi_status acpi_hw_legacy_wake(u8 sleep
 				    [ACPI_EVENT_SLEEP_BUTTON].
 				    status_register_id, ACPI_CLEAR_STATUS);
 
+	/* Enable pcie wake event if support */
+	if ((acpi_gbl_FADT.flags & ACPI_FADT_PCI_EXPRESS_WAKE)) {
+		(void)
+		    acpi_write_bit_register(acpi_gbl_fixed_event_info
+					    [ACPI_EVENT_PCIE_WAKE].
+					    enable_register_id,
+					    ACPI_DISABLE_EVENT);
+		(void)
+		    acpi_write_bit_register(acpi_gbl_fixed_event_info
+					    [ACPI_EVENT_PCIE_WAKE].
+					    status_register_id,
+					    ACPI_CLEAR_STATUS);
+	}
+
 	acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING);
 	return_ACPI_STATUS(status);
 }
Index: linux-pm/drivers/acpi/acpica/utglobal.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/utglobal.c
+++ linux-pm/drivers/acpi/acpica/utglobal.c
@@ -186,6 +186,10 @@ struct acpi_fixed_event_info acpi_gbl_fi
 					ACPI_BITREG_RT_CLOCK_ENABLE,
 					ACPI_BITMASK_RT_CLOCK_STATUS,
 					ACPI_BITMASK_RT_CLOCK_ENABLE},
+	/* ACPI_EVENT_PCIE_WAKE     */ {ACPI_BITREG_PCIEXP_WAKE_STATUS,
+					ACPI_BITREG_PCIEXP_WAKE_DISABLE,
+					ACPI_BITMASK_PCIEXP_WAKE_STATUS,
+					ACPI_BITMASK_PCIEXP_WAKE_DISABLE},
 };
 #endif				/* !ACPI_REDUCED_HARDWARE */
 
Index: linux-pm/include/acpi/actypes.h
===================================================================
--- linux-pm.orig/include/acpi/actypes.h
+++ linux-pm/include/acpi/actypes.h
@@ -723,7 +723,8 @@ typedef u32 acpi_event_type;
 #define ACPI_EVENT_POWER_BUTTON         2
 #define ACPI_EVENT_SLEEP_BUTTON         3
 #define ACPI_EVENT_RTC                  4
-#define ACPI_EVENT_MAX                  4
+#define ACPI_EVENT_PCIE_WAKE            5
+#define ACPI_EVENT_MAX                  5
 #define ACPI_NUM_FIXED_EVENTS           ACPI_EVENT_MAX + 1
 
 /*

[PATCH 03/11] ACPICA: Check that EBDA pointer is in valid memory

[Rafael J. Wysocki]

From: Vit Kabele <vit@kabele.me>

ACPICA commit cc9e7763ceb2e2649fe3422130416d84a3c6854a

If the memory at 0x40e is uninitialized, the retrieved physical_memory
address of EBDA may be beyond the low memory (i.e. above 640K).

If so, the kernel may unintentionally access the VGA memory, that
might not be decoded or even present in case of virtualization.

Link: https://github.com/acpica/acpica/commit/cc9e7763
Signed-off-by: Vit Kabele <vit@kabele.me>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/acpi/acpica/tbxfroot.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

Index: linux-pm/drivers/acpi/acpica/tbxfroot.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/tbxfroot.c
+++ linux-pm/drivers/acpi/acpica/tbxfroot.c
@@ -139,7 +139,11 @@ acpi_find_root_pointer(acpi_physical_add
 
 	/* EBDA present? */
 
-	if (physical_address > 0x400) {
+	/*
+	 * Check that the EBDA pointer from memory is sane and does not point
+	 * above valid low memory
+	 */
+	if (physical_address > 0x400 && physical_address < 0xA0000) {
 		/*
 		 * 1b) Search EBDA paragraphs (EBDA is required to be a
 		 *     minimum of 1K length)

[PATCH 04/11] ACPICA: Do not touch VGA memory when EBDA < 1ki_b

[Rafael J. Wysocki]

From: Vit Kabele <vit@kabele.me>

ACPICA commit a36eda9631e84f271319c41288889dd5b1329369

The ACPICA code assumes that EBDA region must be at least 1ki_b in size.
Because this is not guaranteed, it might happen that while scanning the
memory for RSDP pointer, the kernel touches memory above 640ki_b.

This is unwanted as the VGA memory range may not be decoded or
even present when running under virtualization.

Link: https://github.com/acpica/acpica/commit/a36eda96
Signed-off-by: Vit Kabele <vit@kabele.me>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/acpi/acpica/tbxfroot.c |   22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

Index: linux-pm/drivers/acpi/acpica/tbxfroot.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/tbxfroot.c
+++ linux-pm/drivers/acpi/acpica/tbxfroot.c
@@ -114,6 +114,7 @@ acpi_find_root_pointer(acpi_physical_add
 	u8 *table_ptr;
 	u8 *mem_rover;
 	u32 physical_address;
+	u32 ebda_window_size;
 
 	ACPI_FUNCTION_TRACE(acpi_find_root_pointer);
 
@@ -145,24 +146,31 @@ acpi_find_root_pointer(acpi_physical_add
 	 */
 	if (physical_address > 0x400 && physical_address < 0xA0000) {
 		/*
-		 * 1b) Search EBDA paragraphs (EBDA is required to be a
-		 *     minimum of 1K length)
+		 * Calculate the scan window size
+		 * The EBDA is not guaranteed to be larger than a ki_b and in case
+		 * that it is smaller, the scanning function would leave the low
+		 * memory and continue to the VGA range.
+		 */
+		ebda_window_size = ACPI_MIN(ACPI_EBDA_WINDOW_SIZE,
+					    0xA0000 - physical_address);
+
+		/*
+		 * 1b) Search EBDA paragraphs
 		 */
 		table_ptr = acpi_os_map_memory((acpi_physical_address)
 					       physical_address,
-					       ACPI_EBDA_WINDOW_SIZE);
+					       ebda_window_size);
 		if (!table_ptr) {
 			ACPI_ERROR((AE_INFO,
 				    "Could not map memory at 0x%8.8X for length %u",
-				    physical_address, ACPI_EBDA_WINDOW_SIZE));
+				    physical_address, ebda_window_size));
 
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}
 
 		mem_rover =
-		    acpi_tb_scan_memory_for_rsdp(table_ptr,
-						 ACPI_EBDA_WINDOW_SIZE);
-		acpi_os_unmap_memory(table_ptr, ACPI_EBDA_WINDOW_SIZE);
+		    acpi_tb_scan_memory_for_rsdp(table_ptr, ebda_window_size);
+		acpi_os_unmap_memory(table_ptr, ebda_window_size);
 
 		if (mem_rover) {
 

[PATCH 05/11] ACPICA: iASL: Add CCEL table to both compiler/disassembler

[Rafael J. Wysocki]

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

ACPICA commit 10e4763f155eac0c60295a7e364b0316fc52c4f1

Link: https://github.com/acpica/acpica/commit/10e4763f
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 include/acpi/actbl2.h |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

Index: linux-pm/include/acpi/actbl2.h
===================================================================
--- linux-pm.orig/include/acpi/actbl2.h
+++ linux-pm/include/acpi/actbl2.h
@@ -27,6 +27,7 @@
 #define ACPI_SIG_AGDI           "AGDI"	/* Arm Generic Diagnostic Dump and Reset Device Interface */
 #define ACPI_SIG_APMT           "APMT"	/* Arm Performance Monitoring Unit table */
 #define ACPI_SIG_BDAT           "BDAT"	/* BIOS Data ACPI Table */
+#define ACPI_SIG_CCEL           "CCEL"	/* CC Event Log Table */
 #define ACPI_SIG_IORT           "IORT"	/* IO Remapping Table */
 #define ACPI_SIG_IVRS           "IVRS"	/* I/O Virtualization Reporting Structure */
 #define ACPI_SIG_LPIT           "LPIT"	/* Low Power Idle Table */
@@ -353,6 +354,23 @@ struct acpi_table_bdat {
 };
 
 /*******************************************************************************
+ *
+ * CCEL - CC-Event Log
+ *        From: "Guest-Host-Communication Interface (GHCI) for Intel
+ *        Trust Domain Extensions (Intel TDX)". Feb 2022
+ *
+ ******************************************************************************/
+
+struct acpi_table_ccel {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 CCtype;
+	u8 Ccsub_type;
+	u16 reserved;
+	u64 log_area_minimum_length;
+	u64 log_area_start_address;
+};
+
+/*******************************************************************************
  *
  * IORT - IO Remapping Table
  *

[PATCH 06/11] ACPICA: Add a couple of new UUIDs to the known UUID list

[Rafael J. Wysocki]

From: Bob Moore <robert.moore@intel.com>

ACPICA commit 2176a750230d5e81b4bedf24ef296da0cd0d7bb3

Link: https://github.com/acpica/acpica/commit/2176a750
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 include/acpi/acuuid.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Index: linux-pm/include/acpi/acuuid.h
===================================================================
--- linux-pm.orig/include/acpi/acuuid.h
+++ linux-pm/include/acpi/acuuid.h
@@ -69,5 +69,6 @@
 #define UUID_HIERARCHICAL_DATA_EXTENSION "dbb8e3e6-5886-4ba6-8795-1319f52a966b"
 #define UUID_CORESIGHT_GRAPH            "3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"
 #define UUID_USB4_CAPABILITIES          "23a0d13a-26ab-486c-9c5f-0ffa525a575a"
-
+#define UUID_1ST_FUNCTION_ID            "893f00a6-660c-494e-bcfd-3043f4fb67c0"
+#define UUID_2ND_FUNCTION_ID            "107ededd-d381-4fd7-8da9-08e9a6c79644"
 #endif				/* __ACUUID_H__ */

[PATCH 07/11] ACPICA: Add support for FFH Opregion special context data

[Rafael J. Wysocki]

From: Sudeep Holla <sudeep.holla@arm.com>

ACPICA commit fad527b6e76babc7527c41325bfbef6bd1a1132b

FFH(Fixed Function Hardware) Opregion is approved to be added in ACPI 6.5 via
code first approach [1]. It requires special context data similar to GPIO and
Generic Serial Bus as it needs to know platform specific offset and length.

Add support for the special context data needed by FFH Opregion.

FFH op_region enables advanced use of FFH on some architectures. For example,
it could be used to easily proxy AML code to architecture-specific behavior
(to ensure it is OS initiated)

Actual behavior of FFH is ofcourse architecture specific and depends on
the FFH bindings. The offset and length could have arch specific meaning
or usage.

Link: https://bugzilla.tianocore.org/show_bug.cgi?id=3598 # [1]
Link: https://github.com/acpica/acpica/commit/fad527b6
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/acpi/acpica/evregion.c |    9 +++++++++
 drivers/acpi/acpica/exfield.c  |    8 ++++++--
 drivers/acpi/acpica/exserial.c |    6 ++++++
 include/acpi/acconfig.h        |    2 ++
 include/acpi/actypes.h         |    7 +++++++
 5 files changed, 30 insertions(+), 2 deletions(-)

Index: linux-pm/drivers/acpi/acpica/evregion.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/evregion.c
+++ linux-pm/drivers/acpi/acpica/evregion.c
@@ -172,6 +172,15 @@ acpi_ev_address_space_dispatch(union acp
 			ctx->subspace_id = (u8)region_obj->region.address;
 		}
 
+		if (region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_FIXED_HARDWARE) {
+			struct acpi_ffh_info *ctx =
+			    handler_desc->address_space.context;
+
+			ctx->length = region_obj->region.length;
+			ctx->offset = region_obj->region.address;
+		}
+
 		/*
 		 * We must exit the interpreter because the region setup will
 		 * potentially execute control methods (for example, the _REG method
Index: linux-pm/drivers/acpi/acpica/exfield.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/exfield.c
+++ linux-pm/drivers/acpi/acpica/exfield.c
@@ -141,7 +141,9 @@ acpi_ex_read_data_from_field(struct acpi
 		    || obj_desc->field.region_obj->region.space_id ==
 		    ACPI_ADR_SPACE_IPMI
 		    || obj_desc->field.region_obj->region.space_id ==
-		    ACPI_ADR_SPACE_PLATFORM_RT)) {
+		    ACPI_ADR_SPACE_PLATFORM_RT
+		    || obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_FIXED_HARDWARE)) {
 
 		/* SMBus, GSBus, IPMI serial */
 
@@ -305,7 +307,9 @@ acpi_ex_write_data_to_field(union acpi_o
 		    || obj_desc->field.region_obj->region.space_id ==
 		    ACPI_ADR_SPACE_IPMI
 		    || obj_desc->field.region_obj->region.space_id ==
-		    ACPI_ADR_SPACE_PLATFORM_RT)) {
+		    ACPI_ADR_SPACE_PLATFORM_RT
+		    || obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_FIXED_HARDWARE)) {
 
 		/* SMBus, GSBus, IPMI serial */
 
Index: linux-pm/drivers/acpi/acpica/exserial.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/exserial.c
+++ linux-pm/drivers/acpi/acpica/exserial.c
@@ -323,6 +323,12 @@ acpi_ex_write_serial_bus(union acpi_oper
 		function = ACPI_WRITE;
 		break;
 
+	case ACPI_ADR_SPACE_FIXED_HARDWARE:
+
+		buffer_length = ACPI_FFH_INPUT_BUFFER_SIZE;
+		function = ACPI_WRITE;
+		break;
+
 	default:
 		return_ACPI_STATUS(AE_AML_INVALID_SPACE_ID);
 	}
Index: linux-pm/include/acpi/acconfig.h
===================================================================
--- linux-pm.orig/include/acpi/acconfig.h
+++ linux-pm/include/acpi/acconfig.h
@@ -190,6 +190,8 @@
 
 #define ACPI_PRM_INPUT_BUFFER_SIZE      26
 
+#define ACPI_FFH_INPUT_BUFFER_SIZE      256
+
 /* _sx_d and _sx_w control methods */
 
 #define ACPI_NUM_sx_d_METHODS           4
Index: linux-pm/include/acpi/actypes.h
===================================================================
--- linux-pm.orig/include/acpi/actypes.h
+++ linux-pm/include/acpi/actypes.h
@@ -1116,6 +1116,13 @@ struct acpi_pcc_info {
 	u8 *internal_buffer;
 };
 
+/* Special Context data for FFH Opregion (ACPI 6.5) */
+
+struct acpi_ffh_info {
+	u64 offset;
+	u64 length;
+};
+
 typedef
 acpi_status (*acpi_adr_space_setup) (acpi_handle region_handle,
 				     u32 function,

[PATCH 08/11] ACPICA: Improve warning message for "invalid ACPI name"

[Rafael J. Wysocki]

From: Bob Moore <robert.moore@intel.com>

ACPICA commit 91bef8bea9cd69c33447ba1bfe2c4273994500fd

Added an underscore instead of an (illegal) *

Link: https://github.com/acpica/acpica/commit/91bef8be
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/acpi/acpica/utstring.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Index: linux-pm/drivers/acpi/acpica/utstring.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/utstring.c
+++ linux-pm/drivers/acpi/acpica/utstring.c
@@ -145,7 +145,7 @@ void acpi_ut_repair_name(char *name)
 		return;
 	}
 
-	ACPI_COPY_NAMESEG(&original_name, name);
+	ACPI_COPY_NAMESEG(&original_name, &name[0]);
 
 	/* Check each character in the name */
 
@@ -156,10 +156,10 @@ void acpi_ut_repair_name(char *name)
 
 		/*
 		 * Replace a bad character with something printable, yet technically
-		 * still invalid. This prevents any collisions with existing "good"
+		 * "odd". This prevents any collisions with existing "good"
 		 * names in the namespace.
 		 */
-		name[i] = '*';
+		name[i] = '_';
 		found_bad_char = TRUE;
 	}
 
@@ -169,8 +169,8 @@ void acpi_ut_repair_name(char *name)
 
 		if (!acpi_gbl_enable_interpreter_slack) {
 			ACPI_WARNING((AE_INFO,
-				      "Invalid character(s) in name (0x%.8X), repaired: [%4.4s]",
-				      original_name, name));
+				      "Invalid character(s) in name (0x%.8X) %p, repaired: [%4.4s]",
+				      original_name, name, &name[0]));
 		} else {
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 					  "Invalid character(s) in name (0x%.8X), repaired: [%4.4s]",

[PATCH 09/11] ACPICA: Add CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table

[Rafael J. Wysocki]

From: Alison Schofield <alison.schofield@intel.com>

ACPICA commit 2d8dc0383d3c908389053afbdc329bbd52f009ce

The CXL 3.0 Specification [1] adds two new structures to
the CXL Early Discovery Table (CEDT). The CEDT may include
zero or more entries of these types:

CXIMS: CXL XOR Interleave Math Structure
       Enables the host to find a targets position in an
       Interleave Target List when XOR Math is used.

RDPAS: RCEC Downstream Post Association Structure
       Enables the host to locate the Downstream Port(s)
       that report errors to a given Root Complex Event
       Collector (RCEC).

Link: https://www.computeexpresslink.org/spec-landing # [1]
Link: https://github.com/acpica/acpica/commit/2d8dc038
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 include/acpi/actbl1.h |   35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

Index: linux-pm/include/acpi/actbl1.h
===================================================================
--- linux-pm.orig/include/acpi/actbl1.h
+++ linux-pm/include/acpi/actbl1.h
@@ -329,7 +329,9 @@ struct acpi_cedt_header {
 enum acpi_cedt_type {
 	ACPI_CEDT_TYPE_CHBS = 0,
 	ACPI_CEDT_TYPE_CFMWS = 1,
-	ACPI_CEDT_TYPE_RESERVED = 2,
+	ACPI_CEDT_TYPE_CXIMS = 2,
+	ACPI_CEDT_TYPE_RDPAS = 3,
+	ACPI_CEDT_TYPE_RESERVED = 4,
 };
 
 /* Values for version field above */
@@ -380,6 +382,7 @@ struct acpi_cedt_cfmws_target_element {
 /* Values for Interleave Arithmetic field above */
 
 #define ACPI_CEDT_CFMWS_ARITHMETIC_MODULO   (0)
+#define ACPI_CEDT_CFMWS_ARITHMETIC_XOR      (1)
 
 /* Values for Restrictions field above */
 
@@ -389,6 +392,36 @@ struct acpi_cedt_cfmws_target_element {
 #define ACPI_CEDT_CFMWS_RESTRICT_PMEM       (1<<3)
 #define ACPI_CEDT_CFMWS_RESTRICT_FIXED      (1<<4)
 
+/* 2: CXL XOR Interleave Math Structure */
+
+struct acpi_cedt_cxims {
+	struct acpi_cedt_header header;
+	u16 reserved1;
+	u8 hbig;
+	u8 nr_xormaps;
+	u64 xormap_list[];
+};
+
+/* 3: CXL RCEC Downstream Port Association Structure */
+
+struct acpi_cedt_rdpas {
+	struct acpi_cedt_header header;
+	u8 reserved1;
+	u16 length;
+	u16 segment;
+	u16 bdf;
+	u8 protocol;
+	u64 address;
+};
+
+/* Masks for bdf field above */
+#define ACPI_CEDT_RDPAS_BUS_MASK            0xff00
+#define ACPI_CEDT_RDPAS_DEVICE_MASK         0x00f8
+#define ACPI_CEDT_RDPAS_FUNCTION_MASK       0x0007
+
+#define ACPI_CEDT_RDPAS_PROTOCOL_IO        (0)
+#define ACPI_CEDT_RDPAS_PROTOCOL_CACHEMEM  (1)
+
 /*******************************************************************************
  *
  * CPEP - Corrected Platform Error Polling table (ACPI 4.0)

[PATCH 10/11] ACPICA: IORT: Update for revision E.e

[Rafael J. Wysocki]

From: Robin Murphy <robin.murphy@arm.com>

ACPICA commit 54b54732c5fc9e0384bcfd531f3c10d3a7b628b5

The latest IORT update makes one small addition to SMMUv3 nodes to
describe MSI support independently of wired GSIV support.

Link: https://github.com/acpica/acpica/commit/54b54732
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 include/acpi/actbl2.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Index: linux-pm/include/acpi/actbl2.h
===================================================================
--- linux-pm.orig/include/acpi/actbl2.h
+++ linux-pm/include/acpi/actbl2.h
@@ -375,7 +375,7 @@ struct acpi_table_ccel {
  * IORT - IO Remapping Table
  *
  * Conforms to "IO Remapping Table System Software on ARM Platforms",
- * Document number: ARM DEN 0049E.d, Feb 2022
+ * Document number: ARM DEN 0049E.e, Sep 2022
  *
  ******************************************************************************/
 
@@ -546,6 +546,7 @@ struct acpi_iort_smmu_v3 {
 #define ACPI_IORT_SMMU_V3_COHACC_OVERRIDE   (1)
 #define ACPI_IORT_SMMU_V3_HTTU_OVERRIDE     (3<<1)
 #define ACPI_IORT_SMMU_V3_PXM_VALID         (1<<3)
+#define ACPI_IORT_SMMU_V3_DEVICEID_VALID    (1<<4)
 
 struct acpi_iort_pmcg {
 	u64 page0_base_address;

[PATCH 11/11] ACPICA: Finish support for the CDAT table

[Rafael J. Wysocki]

From: Bob Moore <robert.moore@intel.com>

ACPICA commit 8ac4e5116f59d6f9ba2fbeb9ce22ab58237a278f

Finish support for the CDAT table, in both the data table compiler and
the disassembler.

Link: https://github.com/acpica/acpica/commit/8ac4e511
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/acpi/acpica/Makefile             |    1 
 drivers/acpi/acpica/acglobal.h           |    1 
 drivers/acpi/acpica/actables.h           |    5 
 drivers/acpi/acpica/acutils.h            |   13 ++
 drivers/acpi/acpica/tbdata.c             |    2 
 drivers/acpi/acpica/tbfadt.c             |    2 
 drivers/acpi/acpica/tbprint.c            |   77 --------------
 drivers/acpi/acpica/tbutils.c            |    2 
 drivers/acpi/acpica/tbxfroot.c           |    4 
 drivers/acpi/acpica/utcksum.c            |  170 +++++++++++++++++++++++++++++++
 include/acpi/actbl1.h                    |  116 ++++++++++++++++++++-
 include/acpi/actbl2.h                    |    2 
 tools/power/acpi/tools/acpidump/apdump.c |    4 
 13 files changed, 311 insertions(+), 88 deletions(-)

Index: linux-pm/drivers/acpi/acpica/acglobal.h
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/acglobal.h
+++ linux-pm/drivers/acpi/acpica/acglobal.h
@@ -24,6 +24,7 @@ ACPI_GLOBAL(struct acpi_table_list, acpi
 
 ACPI_GLOBAL(struct acpi_table_header *, acpi_gbl_DSDT);
 ACPI_GLOBAL(struct acpi_table_header, acpi_gbl_original_dsdt_header);
+ACPI_INIT_GLOBAL(char *, acpi_gbl_CDAT, NULL);
 ACPI_INIT_GLOBAL(u32, acpi_gbl_dsdt_index, ACPI_INVALID_TABLE_INDEX);
 ACPI_INIT_GLOBAL(u32, acpi_gbl_facs_index, ACPI_INVALID_TABLE_INDEX);
 ACPI_INIT_GLOBAL(u32, acpi_gbl_xfacs_index, ACPI_INVALID_TABLE_INDEX);
Index: linux-pm/drivers/acpi/acpica/actables.h
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/actables.h
+++ linux-pm/drivers/acpi/acpica/actables.h
@@ -124,11 +124,6 @@ void
 acpi_tb_print_table_header(acpi_physical_address address,
 			   struct acpi_table_header *header);
 
-u8 acpi_tb_checksum(u8 *buffer, u32 length);
-
-acpi_status
-acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length);
-
 void acpi_tb_check_dsdt_header(void);
 
 struct acpi_table_header *acpi_tb_copy_dsdt(u32 table_index);
Index: linux-pm/drivers/acpi/acpica/acutils.h
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/acutils.h
+++ linux-pm/drivers/acpi/acpica/acutils.h
@@ -159,6 +159,19 @@ u8 acpi_ut_valid_name_char(char characte
 void acpi_ut_check_and_repair_ascii(u8 *name, char *repaired_name, u32 count);
 
 /*
+ * utcksum - Checksum utilities
+ */
+u8 acpi_ut_generate_checksum(void *table, u32 length, u8 original_checksum);
+
+u8 acpi_ut_checksum(u8 *buffer, u32 length);
+
+acpi_status
+acpi_ut_verify_cdat_checksum(struct acpi_table_cdat *cdat_table, u32 length);
+
+acpi_status
+acpi_ut_verify_checksum(struct acpi_table_header *table, u32 length);
+
+/*
  * utnonansi - Non-ANSI C library functions
  */
 void acpi_ut_strupr(char *src_string);
Index: linux-pm/drivers/acpi/acpica/tbdata.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/tbdata.c
+++ linux-pm/drivers/acpi/acpica/tbdata.c
@@ -522,7 +522,7 @@ acpi_tb_verify_temp_table(struct acpi_ta
 		/* Verify the checksum */
 
 		status =
-		    acpi_tb_verify_checksum(table_desc->pointer,
+		    acpi_ut_verify_checksum(table_desc->pointer,
 					    table_desc->length);
 		if (ACPI_FAILURE(status)) {
 			ACPI_EXCEPTION((AE_INFO, AE_NO_MEMORY,
Index: linux-pm/drivers/acpi/acpica/tbfadt.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/tbfadt.c
+++ linux-pm/drivers/acpi/acpica/tbfadt.c
@@ -298,7 +298,7 @@ void acpi_tb_parse_fadt(void)
 	 * Validate the FADT checksum before we copy the table. Ignore
 	 * checksum error as we want to try to get the DSDT and FACS.
 	 */
-	(void)acpi_tb_verify_checksum(table, length);
+	(void)acpi_ut_verify_checksum(table, length);
 
 	/* Create a local copy of the FADT in common ACPI 2.0+ format */
 
Index: linux-pm/drivers/acpi/acpica/tbprint.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/tbprint.c
+++ linux-pm/drivers/acpi/acpica/tbprint.c
@@ -10,6 +10,7 @@
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "actables.h"
+#include "acutils.h"
 
 #define _COMPONENT          ACPI_TABLES
 ACPI_MODULE_NAME("tbprint")
@@ -39,7 +40,7 @@ static void acpi_tb_fix_string(char *str
 {
 
 	while (length && *string) {
-		if (!isprint((int)*string)) {
+		if (!isprint((int)(u8)*string)) {
 			*string = '?';
 		}
 
@@ -135,77 +136,3 @@ acpi_tb_print_table_header(acpi_physical
 			   local_header.asl_compiler_revision));
 	}
 }
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_tb_validate_checksum
- *
- * PARAMETERS:  table               - ACPI table to verify
- *              length              - Length of entire table
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Verifies that the table checksums to zero. Optionally returns
- *              exception on bad checksum.
- *
- ******************************************************************************/
-
-acpi_status acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length)
-{
-	u8 checksum;
-
-	/*
-	 * FACS/S3PT:
-	 * They are the odd tables, have no standard ACPI header and no checksum
-	 */
-
-	if (ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_S3PT) ||
-	    ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_FACS)) {
-		return (AE_OK);
-	}
-
-	/* Compute the checksum on the table */
-
-	checksum = acpi_tb_checksum(ACPI_CAST_PTR(u8, table), length);
-
-	/* Checksum ok? (should be zero) */
-
-	if (checksum) {
-		ACPI_BIOS_WARNING((AE_INFO,
-				   "Incorrect checksum in table [%4.4s] - 0x%2.2X, "
-				   "should be 0x%2.2X",
-				   table->signature, table->checksum,
-				   (u8)(table->checksum - checksum)));
-
-#if (ACPI_CHECKSUM_ABORT)
-		return (AE_BAD_CHECKSUM);
-#endif
-	}
-
-	return (AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_tb_checksum
- *
- * PARAMETERS:  buffer          - Pointer to memory region to be checked
- *              length          - Length of this memory region
- *
- * RETURN:      Checksum (u8)
- *
- * DESCRIPTION: Calculates circular checksum of memory region.
- *
- ******************************************************************************/
-
-u8 acpi_tb_checksum(u8 *buffer, u32 length)
-{
-	u8 sum = 0;
-	u8 *end = buffer + length;
-
-	while (buffer < end) {
-		sum = (u8)(sum + *(buffer++));
-	}
-
-	return (sum);
-}
Index: linux-pm/drivers/acpi/acpica/tbutils.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/tbutils.c
+++ linux-pm/drivers/acpi/acpica/tbutils.c
@@ -299,7 +299,7 @@ acpi_tb_parse_root_table(acpi_physical_a
 
 	/* Validate the root table checksum */
 
-	status = acpi_tb_verify_checksum(table, length);
+	status = acpi_ut_verify_checksum(table, length);
 	if (ACPI_FAILURE(status)) {
 		acpi_os_unmap_memory(table, length);
 		return_ACPI_STATUS(status);
Index: linux-pm/drivers/acpi/acpica/tbxfroot.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/tbxfroot.c
+++ linux-pm/drivers/acpi/acpica/tbxfroot.c
@@ -74,14 +74,14 @@ acpi_status acpi_tb_validate_rsdp(struct
 
 	/* Check the standard checksum */
 
-	if (acpi_tb_checksum((u8 *) rsdp, ACPI_RSDP_CHECKSUM_LENGTH) != 0) {
+	if (acpi_ut_checksum((u8 *)rsdp, ACPI_RSDP_CHECKSUM_LENGTH) != 0) {
 		return (AE_BAD_CHECKSUM);
 	}
 
 	/* Check extended checksum if table version >= 2 */
 
 	if ((rsdp->revision >= 2) &&
-	    (acpi_tb_checksum((u8 *) rsdp, ACPI_RSDP_XCHECKSUM_LENGTH) != 0)) {
+	    (acpi_ut_checksum((u8 *)rsdp, ACPI_RSDP_XCHECKSUM_LENGTH) != 0)) {
 		return (AE_BAD_CHECKSUM);
 	}
 
Index: linux-pm/drivers/acpi/acpica/utcksum.c
===================================================================
--- /dev/null
+++ linux-pm/drivers/acpi/acpica/utcksum.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/******************************************************************************
+ *
+ * Module Name: utcksum - Support generating table checksums
+ *
+ * Copyright (C) 2000 - 2022, Intel Corp.
+ *
+ *****************************************************************************/
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acutils.h"
+
+/* This module used for application-level code only */
+
+#define _COMPONENT          ACPI_CA_DISASSEMBLER
+ACPI_MODULE_NAME("utcksum")
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_verify_checksum
+ *
+ * PARAMETERS:  table               - ACPI table to verify
+ *              length              - Length of entire table
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Verifies that the table checksums to zero. Optionally returns
+ *              exception on bad checksum.
+ *              Note: We don't have to check for a CDAT here, since CDAT is
+ *              not in the RSDT/XSDT, and the CDAT table is never installed
+ *              via ACPICA.
+ *
+ ******************************************************************************/
+acpi_status acpi_ut_verify_checksum(struct acpi_table_header *table, u32 length)
+{
+	u8 checksum;
+
+	/*
+	 * FACS/S3PT:
+	 * They are the odd tables, have no standard ACPI header and no checksum
+	 */
+	if (ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_S3PT) ||
+	    ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_FACS)) {
+		return (AE_OK);
+	}
+
+	/* Compute the checksum on the table */
+
+	length = table->length;
+	checksum =
+	    acpi_ut_generate_checksum(ACPI_CAST_PTR(u8, table), length,
+				      table->checksum);
+
+	/* Computed checksum matches table? */
+
+	if (checksum != table->checksum) {
+		ACPI_BIOS_WARNING((AE_INFO,
+				   "Incorrect checksum in table [%4.4s] - 0x%2.2X, "
+				   "should be 0x%2.2X",
+				   table->signature, table->checksum,
+				   table->checksum - checksum));
+
+#if (ACPI_CHECKSUM_ABORT)
+		return (AE_BAD_CHECKSUM);
+#endif
+	}
+
+	return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_verify_cdat_checksum
+ *
+ * PARAMETERS:  table               - CDAT ACPI table to verify
+ *              length              - Length of entire table
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Verifies that the CDAT table checksums to zero. Optionally
+ *              returns an exception on bad checksum.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ut_verify_cdat_checksum(struct acpi_table_cdat *cdat_table, u32 length)
+{
+	u8 checksum;
+
+	/* Compute the checksum on the table */
+
+	checksum = acpi_ut_generate_checksum(ACPI_CAST_PTR(u8, cdat_table),
+					     cdat_table->length,
+					     cdat_table->checksum);
+
+	/* Computed checksum matches table? */
+
+	if (checksum != cdat_table->checksum) {
+		ACPI_BIOS_WARNING((AE_INFO,
+				   "Incorrect checksum in table [%4.4s] - 0x%2.2X, "
+				   "should be 0x%2.2X",
+				   acpi_gbl_CDAT, cdat_table->checksum,
+				   checksum));
+
+#if (ACPI_CHECKSUM_ABORT)
+		return (AE_BAD_CHECKSUM);
+#endif
+	}
+
+	cdat_table->checksum = checksum;
+	return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_generate_checksum
+ *
+ * PARAMETERS:  table               - Pointer to table to be checksummed
+ *              length              - Length of the table
+ *              original_checksum   - Value of the checksum field
+ *
+ * RETURN:      8 bit checksum of buffer
+ *
+ * DESCRIPTION: Computes an 8 bit checksum of the table.
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_generate_checksum(void *table, u32 length, u8 original_checksum)
+{
+	u8 checksum;
+
+	/* Sum the entire table as-is */
+
+	checksum = acpi_ut_checksum((u8 *)table, length);
+
+	/* Subtract off the existing checksum value in the table */
+
+	checksum = (u8)(checksum - original_checksum);
+
+	/* Compute and return the final checksum */
+
+	checksum = (u8)(0 - checksum);
+	return (checksum);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_checksum
+ *
+ * PARAMETERS:  buffer          - Pointer to memory region to be checked
+ *              length          - Length of this memory region
+ *
+ * RETURN:      Checksum (u8)
+ *
+ * DESCRIPTION: Calculates circular checksum of memory region.
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_checksum(u8 *buffer, u32 length)
+{
+	u8 sum = 0;
+	u8 *end = buffer + length;
+
+	while (buffer < end) {
+		sum = (u8)(sum + *(buffer++));
+	}
+
+	return (sum);
+}
Index: linux-pm/include/acpi/actbl1.h
===================================================================
--- linux-pm.orig/include/acpi/actbl1.h
+++ linux-pm/include/acpi/actbl1.h
@@ -45,6 +45,7 @@
 #define ACPI_SIG_HMAT           "HMAT"	/* Heterogeneous Memory Attributes Table */
 #define ACPI_SIG_HPET           "HPET"	/* High Precision Event Timer table */
 #define ACPI_SIG_IBFT           "IBFT"	/* iSCSI Boot Firmware Table */
+#define ACPI_SIG_MSCT           "MSCT"	/* Maximum System Characteristics Table */
 
 #define ACPI_SIG_S3PT           "S3PT"	/* S3 Performance (sub)Table */
 #define ACPI_SIG_PCCS           "PCC"	/* PCC Shared Memory Region */
@@ -305,10 +306,123 @@ struct acpi_table_boot {
 
 /*******************************************************************************
  *
+ * CDAT - Coherent Device Attribute Table
+ *        Version 1
+ *
+ * Conforms to the "Coherent Device Attribute Table (CDAT) Specification
+ " (Revision 1.01, October 2020.)
+ *
+ ******************************************************************************/
+
+struct acpi_table_cdat {
+	u32 length;		/* Length of table in bytes, including this header */
+	u8 revision;		/* ACPI Specification minor version number */
+	u8 checksum;		/* To make sum of entire table == 0 */
+	u8 reserved[6];
+	u32 sequence;		/* Used to detect runtime CDAT table changes */
+};
+
+/* CDAT common subtable header */
+
+struct acpi_cdat_header {
+	u8 type;
+	u8 reserved;
+	u16 length;
+};
+
+/* Values for Type field above */
+
+enum acpi_cdat_type {
+	ACPI_CDAT_TYPE_DSMAS = 0,
+	ACPI_CDAT_TYPE_DSLBIS = 1,
+	ACPI_CDAT_TYPE_DSMSCIS = 2,
+	ACPI_CDAT_TYPE_DSIS = 3,
+	ACPI_CDAT_TYPE_DSEMTS = 4,
+	ACPI_CDAT_TYPE_SSLBIS = 5,
+	ACPI_CDAT_TYPE_RESERVED = 6	/* 6 through 0xFF are reserved */
+};
+
+/* Subtable 0: Device Scoped Memory Affinity Structure (DSMAS) */
+
+struct acpi_cadt_dsmas {
+	u8 dsmad_handle;
+	u8 flags;
+	u16 reserved;
+	u64 dpa_base_address;
+	u64 dpa_length;
+};
+
+/* Flags for subtable above */
+
+#define ACPI_CEDT_DSMAS_NON_VOLATILE        (1 << 2)
+
+/* Subtable 1: Device scoped Latency and Bandwidth Information Structure (DSLBIS) */
+
+struct acpi_cdat_dslbis {
+	u8 handle;
+	u8 flags;		/* If Handle matches a DSMAS handle, the definition of this field matches
+				 * Flags field in HMAT System Locality Latency */
+	u8 data_type;
+	u8 reserved;
+	u64 entry_base_unit;
+	u16 entry[3];
+	u16 reserved2;
+};
+
+/* Subtable 2: Device Scoped Memory Side Cache Information Structure (DSMSCIS) */
+
+struct acpi_cdat_dsmscis {
+	u8 dsmas_handle;
+	u8 reserved[3];
+	u64 side_cache_size;
+	u32 cache_attributes;
+};
+
+/* Subtable 3: Device Scoped Initiator Structure (DSIS) */
+
+struct acpi_cdat_dsis {
+	u8 flags;
+	u8 handle;
+	u16 reserved;
+};
+
+/* Flags for above subtable */
+
+#define ACPI_CDAT_DSIS_MEM_ATTACHED         (1 << 0)
+
+/* Subtable 4: Device Scoped EFI Memory Type Structure (DSEMTS) */
+
+struct acpi_cdat_dsemts {
+	u8 dsmas_handle;
+	u8 memory_type;
+	u16 reserved;
+	u64 dpa_offset;
+	u64 range_length;
+};
+
+/* Subtable 5: Switch Scoped Latency and Bandwidth Information Structure (SSLBIS) */
+
+struct acpi_cdat_sslbis {
+	u8 data_type;
+	u8 reserved[3];
+	u64 entry_base_unit;
+};
+
+/* Sub-subtable for above, sslbe_entries field */
+
+struct acpi_cdat_sslbe {
+	u16 portx_id;
+	u16 porty_id;
+	u16 latency_or_bandwidth;
+	u16 reserved;
+};
+
+/*******************************************************************************
+ *
  * CEDT - CXL Early Discovery Table
  *        Version 1
  *
- * Conforms to the "CXL Early Discovery Table" (CXL 2.0)
+ * Conforms to the "CXL Early Discovery Table" (CXL 2.0, October 2020)
  *
  ******************************************************************************/
 
Index: linux-pm/include/acpi/actbl2.h
===================================================================
--- linux-pm.orig/include/acpi/actbl2.h
+++ linux-pm/include/acpi/actbl2.h
@@ -28,6 +28,7 @@
 #define ACPI_SIG_APMT           "APMT"	/* Arm Performance Monitoring Unit table */
 #define ACPI_SIG_BDAT           "BDAT"	/* BIOS Data ACPI Table */
 #define ACPI_SIG_CCEL           "CCEL"	/* CC Event Log Table */
+#define ACPI_SIG_CDAT           "CDAT"	/* Coherent Device Attribute Table */
 #define ACPI_SIG_IORT           "IORT"	/* IO Remapping Table */
 #define ACPI_SIG_IVRS           "IVRS"	/* I/O Virtualization Reporting Structure */
 #define ACPI_SIG_LPIT           "LPIT"	/* Low Power Idle Table */
@@ -35,7 +36,6 @@
 #define ACPI_SIG_MCFG           "MCFG"	/* PCI Memory Mapped Configuration table */
 #define ACPI_SIG_MCHI           "MCHI"	/* Management Controller Host Interface table */
 #define ACPI_SIG_MPST           "MPST"	/* Memory Power State Table */
-#define ACPI_SIG_MSCT           "MSCT"	/* Maximum System Characteristics Table */
 #define ACPI_SIG_MSDM           "MSDM"	/* Microsoft Data Management Table */
 #define ACPI_SIG_NFIT           "NFIT"	/* NVDIMM Firmware Interface Table */
 #define ACPI_SIG_NHLT           "NHLT"	/* Non HD Audio Link Table */
Index: linux-pm/tools/power/acpi/tools/acpidump/apdump.c
===================================================================
--- linux-pm.orig/tools/power/acpi/tools/acpidump/apdump.c
+++ linux-pm/tools/power/acpi/tools/acpidump/apdump.c
@@ -78,7 +78,9 @@ u8 ap_is_valid_checksum(struct acpi_tabl
 		rsdp = ACPI_CAST_PTR(struct acpi_table_rsdp, table);
 		status = acpi_tb_validate_rsdp(rsdp);
 	} else {
-		status = acpi_tb_verify_checksum(table, table->length);
+		/* We don't have to check for a CDAT here, since CDAT is not in the RSDT/XSDT */
+
+		status = acpi_ut_verify_checksum(table, table->length);
 	}
 
 	if (ACPI_FAILURE(status)) {
Index: linux-pm/drivers/acpi/acpica/Makefile
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/Makefile
+++ linux-pm/drivers/acpi/acpica/Makefile
@@ -155,6 +155,7 @@ acpi-y +=		\
 	utalloc.o	\
 	utascii.o	\
 	utbuffer.o	\
+	utcksum.o	\
 	utcopy.o	\
 	utexcep.o	\
 	utdebug.o	\