[PATCH v2 0/3] arm64: dts: meson: gxbb-kii-pro: device-tree updates

[PATCH v2 0/3] arm64: dts: meson: gxbb-kii-pro: device-tree updates

[Christian Hewitt]

First we sort nodes in the current dts and remove some blank lines. Then we
add the remaining bits needed for Bluetooth to work. And finally we add the
AIU audio card to have HDMI and S/PDIF audio output.

Changes since v1:

- Add reviews from Neil
- Drop unneded 'okay' from audio patch

Christian Hewitt (3):
  arm64: dts: meson: gxbb-kii-pro: sort and tidy the dts
  arm64: dts: meson: gxbb-kii-pro: complete the bluetooth node
  arm64: dts: meson: gxbb-kii-pro: add initial audio support

 .../boot/dts/amlogic/meson-gxbb-kii-pro.dts   | 83 ++++++++++++++++---
 1 file changed, 72 insertions(+), 11 deletions(-)

-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v2 1/3] arm64: dts: meson: gxbb-kii-pro: sort and tidy the dts

[Christian Hewitt]

Alpha-sort the nodes, move the default line in the LED node to where it's
normally found, and remove excess spacing. No functional changes.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 .../boot/dts/amlogic/meson-gxbb-kii-pro.dts   | 32 ++++++++-----------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index 6d8cc00fedc7..9bfdb54d912a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -6,21 +6,22 @@
 /dts-v1/;
 
 #include "meson-gxbb-p20x.dtsi"
-
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+
 / {
 	compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
 	model = "Videostrong KII Pro";
 
 	leds {
 		compatible = "gpio-leds";
+
 		status {
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_STATUS;
+			default-state = "off";
 		};
 	};
 
@@ -34,24 +35,8 @@ button-reset {
 			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
 		};
 	};
-
-};
-
-
-
-&uart_A {
-	status = "okay";
-	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-
-	bluetooth {
-		compatible = "brcm,bcm4335a0";
-	};
 };
 
-
-
 &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_rmii_pins>;
@@ -78,3 +63,14 @@ eth_phy0: ethernet-phy@0 {
 &ir {
 	linux,rc-map-name = "rc-videostrong-kii-pro";
 };
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm4335a0";
+	};
+};
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v2 1/3] arm64: dts: meson: gxbb-kii-pro: sort and tidy the dts

[Martin Blumenstingl]

On Fri, Feb 10, 2023 at 6:07 PM Christian Hewitt
<christianshewitt@gmail.com> wrote:
>
> Alpha-sort the nodes, move the default line in the LED node to where it's
> normally found, and remove excess spacing. No functional changes.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v2 2/3] arm64: dts: meson: gxbb-kii-pro: complete the bluetooth node

[Christian Hewitt]

Add missing content to the bluetooth node to align it with the content
used in (all) other GXBB dts files.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index 9bfdb54d912a..435ae2aa404e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -72,5 +72,10 @@ &uart_A {
 
 	bluetooth {
 		compatible = "brcm,bcm4335a0";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
 	};
 };
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v2 2/3] arm64: dts: meson: gxbb-kii-pro: complete the bluetooth node

[Martin Blumenstingl]

On Fri, Feb 10, 2023 at 6:07 PM Christian Hewitt
<christianshewitt@gmail.com> wrote:
>
> Add missing content to the bluetooth node to align it with the content
> used in (all) other GXBB dts files.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v2 3/3] arm64: dts: meson: gxbb-kii-pro: add initial audio support

[Christian Hewitt]

Add initial support for HDMI and S/PDIF audio output.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 .../boot/dts/amlogic/meson-gxbb-kii-pro.dts   | 60 +++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index 435ae2aa404e..a09340e9f73a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -9,11 +9,19 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
 	model = "Videostrong KII Pro";
 
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -35,6 +43,58 @@ button-reset {
 			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "KII-PRO";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_y_pins>;
+	pinctrl-names = "default";
 };
 
 &ethmac {
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v2 3/3] arm64: dts: meson: gxbb-kii-pro: add initial audio support

[Martin Blumenstingl]

On Fri, Feb 10, 2023 at 6:07 PM Christian Hewitt
<christianshewitt@gmail.com> wrote:
>
> Add initial support for HDMI and S/PDIF audio output.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v2 0/3] arm64: dts: meson: gxbb-kii-pro: device-tree updates

[Neil Armstrong]

Hi !

On 10/02/2023 18:07, Christian Hewitt wrote:
> First we sort nodes in the current dts and remove some blank lines. Then we
> add the remaining bits needed for Bluetooth to work. And finally we add the
> AIU audio card to have HDMI and S/PDIF audio output.
> 
> Changes since v1:
> 
> - Add reviews from Neil
> - Drop unneded 'okay' from audio patch
> 
> Christian Hewitt (3):
>    arm64: dts: meson: gxbb-kii-pro: sort and tidy the dts
>    arm64: dts: meson: gxbb-kii-pro: complete the bluetooth node
>    arm64: dts: meson: gxbb-kii-pro: add initial audio support
> 
>   .../boot/dts/amlogic/meson-gxbb-kii-pro.dts   | 83 ++++++++++++++++---
>   1 file changed, 72 insertions(+), 11 deletions(-)
> 

This doesn't apply anymore on v6.3-rc1, can you rebase ?
Thanks!

Neil

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v2 0/3] arm64: dts: meson: gxbb-kii-pro: device-tree updates

[Christian Hewitt]

> On 6 Mar 2023, at 12:40 pm, Neil Armstrong <neil.armstrong@linaro.org> wrote:
> 
> Hi !
> 
> On 10/02/2023 18:07, Christian Hewitt wrote:
>> First we sort nodes in the current dts and remove some blank lines. Then we
>> add the remaining bits needed for Bluetooth to work. And finally we add the
>> AIU audio card to have HDMI and S/PDIF audio output.
>> Changes since v1:
>> - Add reviews from Neil
>> - Drop unneded 'okay' from audio patch
>> Christian Hewitt (3):
>>   arm64: dts: meson: gxbb-kii-pro: sort and tidy the dts
>>   arm64: dts: meson: gxbb-kii-pro: complete the bluetooth node
>>   arm64: dts: meson: gxbb-kii-pro: add initial audio support
>>  .../boot/dts/amlogic/meson-gxbb-kii-pro.dts   | 83 ++++++++++++++++---
>>  1 file changed, 72 insertions(+), 11 deletions(-)
> 
> This doesn't apply anymore on v6.3-rc1, can you rebase ?
> Thanks!

v3 rebased on for-next sent. 

Christian
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic