Re: [PATCH V6 2/3] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver

[Yu Tu <yu.tu@amlogic.com>]

Hi Jerome,

On 2023/1/19 19:20, Jerome Brunet wrote:
> [ EXTERNAL EMAIL ]
> 
> 
> On Mon 16 Jan 2023 at 15:42, Yu Tu <yu.tu@amlogic.com> wrote:
> 
>> Add the S4 PLL clock controller driver in the s4 SoC family.
>>
>> Signed-off-by: Yu Tu <yu.tu@amlogic.com>
>> ---
> 
> [...]
> 
>> +
>> +static struct clk_regmap s4_fclk_div2 = {
>> +	.data = &(struct clk_regmap_gate_data){
>> +		.offset = ANACTRL_FIXPLL_CTRL1,
>> +		.bit_idx = 24,
>> +	},
>> +	.hw.init = &(struct clk_init_data){
>> +		.name = "fclk_div2",
>> +		.ops = &clk_regmap_gate_ro_ops,
> 
> On the previous SoC, these fixed divider gate were not read-only.
> They are marked as critical when necessary, with the appropriate
> comment.
> 
> Why is it different on the s4 ?

In fact, this part of the SOC is no different from the previous G12a/b 
and so on.

I remember that my first version was made according to G12A, and I 
changed this way under your suggestion.

Maybe you were busy and forgot. For me, this mode and the previous g12a 
mode function is ok. I can do either. So now how do you decide to go 
that way?

> 
>> +		.parent_hws = (const struct clk_hw *[]) {
>> +			&s4_fclk_div2_div.hw
>> +		},
>> +		.num_parents = 1,
>> +	},
>> +};
>> +
> 
> [...]
> 
>> +#ifndef __MESON_S4_PLL_H__
>> +#define __MESON_S4_PLL_H__
>> +
>> +/* ANA_CTRL - Registers
>> + * REG_BASE:  REGISTER_BASE_ADDR = 0xfe008000
> 
> This multi-line comment style is wrong in clk/
> REG_BASE is not used so I'm not sure this is useful

I will remove REG_BASE and  change this format in next version.

> 
>> + */
>> +#define ANACTRL_FIXPLL_CTRL0                       0x040
>> +#define ANACTRL_FIXPLL_CTRL1                       0x044
>> +#define ANACTRL_FIXPLL_CTRL2                       0x048
>> +#define ANACTRL_FIXPLL_CTRL3                       0x04c
>> +#define ANACTRL_FIXPLL_CTRL4                       0x050
>> +#define ANACTRL_FIXPLL_CTRL5                       0x054
>> +#define ANACTRL_FIXPLL_CTRL6                       0x058
>> +#define ANACTRL_FIXPLL_STS                         0x05c
>> +#define ANACTRL_GP0PLL_CTRL0                       0x080
>> +#define ANACTRL_GP0PLL_CTRL1                       0x084
>> +#define ANACTRL_GP0PLL_CTRL2                       0x088
>> +#define ANACTRL_GP0PLL_CTRL3                       0x08c
>> +#define ANACTRL_GP0PLL_CTRL4                       0x090
>> +#define ANACTRL_GP0PLL_CTRL5                       0x094
>> +#define ANACTRL_GP0PLL_CTRL6                       0x098
>> +#define ANACTRL_GP0PLL_STS                         0x09c
>> +#define ANACTRL_HIFIPLL_CTRL0                      0x100
>> +#define ANACTRL_HIFIPLL_CTRL1                      0x104
>> +#define ANACTRL_HIFIPLL_CTRL2                      0x108
>> +#define ANACTRL_HIFIPLL_CTRL3                      0x10c
>> +#define ANACTRL_HIFIPLL_CTRL4                      0x110
>> +#define ANACTRL_HIFIPLL_CTRL5                      0x114
>> +#define ANACTRL_HIFIPLL_CTRL6                      0x118
>> +#define ANACTRL_HIFIPLL_STS                        0x11c
>> +#define ANACTRL_MPLL_CTRL0                         0x180
>> +#define ANACTRL_MPLL_CTRL1                         0x184
>> +#define ANACTRL_MPLL_CTRL2                         0x188
>> +#define ANACTRL_MPLL_CTRL3                         0x18c
>> +#define ANACTRL_MPLL_CTRL4                         0x190
>> +#define ANACTRL_MPLL_CTRL5                         0x194
>> +#define ANACTRL_MPLL_CTRL6                         0x198
>> +#define ANACTRL_MPLL_CTRL7                         0x19c
>> +#define ANACTRL_MPLL_CTRL8                         0x1a0
>> +#define ANACTRL_MPLL_STS                           0x1a4
>> +#define ANACTRL_HDMIPLL_CTRL0                      0x1c0
>> +#define ANACTRL_HDMIPLL_CTRL1                      0x1c4
>> +#define ANACTRL_HDMIPLL_CTRL2                      0x1c8
>> +#define ANACTRL_HDMIPLL_CTRL3                      0x1cc
>> +#define ANACTRL_HDMIPLL_CTRL4                      0x1d0
>> +#define ANACTRL_HDMIPLL_CTRL5                      0x1d4
>> +#define ANACTRL_HDMIPLL_CTRL6                      0x1d8
>> +#define ANACTRL_HDMIPLL_STS                        0x1dc
>> +#define ANACTRL_HDMIPLL_VLOCK                      0x1e4
>> +
>> +/*
>> + * CLKID index values
>> + *
>> + * These indices are entirely contrived and do not map onto the hardware.
>> + * It has now been decided to expose everything by default in the DT header:
>> + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
>> + * to expose, such as the internal muxes and dividers of composite clocks,
>> + * will remain defined here.
>> + */
>> +#define CLKID_FIXED_PLL_DCO		0
>> +#define CLKID_FCLK_DIV2_DIV		2
>> +#define CLKID_FCLK_DIV3_DIV		4
>> +#define CLKID_FCLK_DIV4_DIV		6
>> +#define CLKID_FCLK_DIV5_DIV		8
>> +#define CLKID_FCLK_DIV7_DIV		10
>> +#define CLKID_FCLK_DIV2P5_DIV		12
>> +#define CLKID_GP0_PLL_DCO		14
>> +#define CLKID_HIFI_PLL_DCO		16
>> +#define CLKID_HDMI_PLL_DCO		18
>> +#define CLKID_HDMI_PLL_OD		19
>> +#define CLKID_MPLL_50M_DIV		21
>> +#define CLKID_MPLL_PREDIV		23
>> +#define CLKID_MPLL0_DIV			24
>> +#define CLKID_MPLL1_DIV			26
>> +#define CLKID_MPLL2_DIV			28
>> +#define CLKID_MPLL3_DIV			30
>> +
>> +#define NR_PLL_CLKS			32
>> +/* include the CLKIDs that have been made part of the DT binding */
>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
>> +
>> +#endif /* __MESON_S4_PLL_H__ */
> 

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic