Linux-Amlogic Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Heiner Kallweit <hkallweit1@gmail.com>
To: Rob Herring <robh@kernel.org>
Cc: "Thierry Reding" <thierry.reding@gmail.com>,
	"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>,
	linux-pwm@vger.kernel.org,
	"Neil Armstrong" <neil.armstrong@linaro.org>,
	"open list:ARM/Amlogic Meson..."
	<linux-amlogic@lists.infradead.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Jerome Brunet" <jbrunet@baylibre.com>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	linux-rtc@vger.kernel.org,
	"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
	"Alessandro Zummo" <a.zummo@towertech.it>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Marc Zyngier" <maz@kernel.org>,
	"Kevin Hilman" <khilman@baylibre.com>,
	"Martin Blumenstingl" <martin.blumenstingl@googlemail.com>
Subject: Re: [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding
Date: Tue, 24 Jan 2023 08:03:17 +0100	[thread overview]
Message-ID: <d8f0a5a9-5a16-1f63-8444-86434ff52e34@gmail.com> (raw)
In-Reply-To: <167452325371.3118653.16373677195744392136.robh@kernel.org>

On 24.01.2023 02:22, Rob Herring wrote:
> 
> On Mon, 23 Jan 2023 22:30:08 +0100, Heiner Kallweit wrote:
>> Add Amlogic Meson GPIO interrupt controller binding.
>> Tested with make targets dt_binding_check and dtbs_check.
>>
>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>> ---
>>  .../amlogic,meson-gpio-intc.txt               | 38 ----------
>>  .../amlogic,meson-gpio-intc.yaml              | 72 +++++++++++++++++++
>>  2 files changed, 72 insertions(+), 38 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
>>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
>>
> 
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
> 

Patch 4 of the series fixes these warnings.
Did you apply the full series?


> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
> 
> Full log is available here: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/06289641-18b1-320d-6162-7ae176452f31@gmail.com
> 
> 
> interrupt-controller@4080: compatible: ['amlogic,meson-s4-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> 	arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb
> 
> interrupt-controller@9880: compatible:0: 'amlogic,meson-gpio-intc' is not one of ['amlogic,meson8-gpio-intc', 'amlogic,meson8b-gpio-intc', 'amlogic,meson-gxbb-gpio-intc', 'amlogic,meson-gxl-gpio-intc', 'amlogic,meson-axg-gpio-intc', 'amlogic,meson-g12a-gpio-intc', 'amlogic,meson-sm1-gpio-intc', 'amlogic,meson-a1-gpio-intc', 'amlogic,meson-s4-gpio-intc', 'amlogic,meson-sc2-gpio-intc']
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
> 	arch/arm/boot/dts/meson8b-ec100.dtb
> 	arch/arm/boot/dts/meson8b-mxq.dtb
> 	arch/arm/boot/dts/meson8b-odroidc1.dtb
> 
> interrupt-controller@9880: compatible: ['amlogic,meson8-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> 	arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> 	arch/arm/boot/dts/meson8-minix-neo-x8.dtb
> 
> interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson8b-gpio-intc'] is too long
> 	arch/arm/boot/dts/meson8b-ec100.dtb
> 	arch/arm/boot/dts/meson8b-mxq.dtb
> 	arch/arm/boot/dts/meson8b-odroidc1.dtb
> 
> interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson-gxbb-gpio-intc'] is too long
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
> 
> interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson-gxl-gpio-intc'] is too long
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
> 	arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
> 
> interrupt-controller@f080: compatible: ['amlogic,meson-axg-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> 	arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dtb
> 	arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dtb
> 	arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dtb
> 	arch/arm64/boot/dts/amlogic/meson-axg-s400.dtb
> 
> interrupt-controller@f080: compatible: ['amlogic,meson-g12a-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> 	arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dtb
> 	arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dtb
> 	arch/arm64/boot/dts/amlogic/meson-g12a-u200.dtb
> 	arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dtb
> 	arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dtb
> 	arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dtb
> 	arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dtb
> 	arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dtb
> 	arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dtb
> 	arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtb
> 	arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dtb
> 	arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dtb
> 	arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dtb
> 
> interrupt-controller@f080: compatible: ['amlogic,meson-sm1-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> 	arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dtb
> 	arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dtb
> 	arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dtb
> 	arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dtb
> 	arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dtb
> 	arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dtb
> 	arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dtb
> 	arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dtb
> 	arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dtb
> 	arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dtb
> 


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2023-01-24  7:04 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
2023-01-23 21:23 ` [PATCH 1/8] arm64: dts: meson-gx: Remove invalid pwm compatible Heiner Kallweit
2023-01-23 21:24 ` [PATCH 2/8] arm64: dts: amlogic: Fix non-compliant SD/SDIO node names Heiner Kallweit
2023-01-24  7:17   ` Neil Armstrong
2023-01-23 21:25 ` [PATCH 3/8] arm64: dts: meson-gx: Set only one compatible string for mmc Heiner Kallweit
2023-01-23 21:27 ` [PATCH 4/8] arm64: dts: amlogic: Remove invalid compatible string amlogic,meson-gpio-intc Heiner Kallweit
2023-01-23 21:28 ` [PATCH 5/8] dt-bindings: rtc: Add Amlogic Meson vrtc controller binding Heiner Kallweit
2023-01-25 19:19   ` Rob Herring
2023-01-23 21:29 ` [PATCH 6/8] dt-bindings: pwm: Add Amlogic Meson PWM binding Heiner Kallweit
2023-01-24  1:22   ` Rob Herring
2023-01-25 19:22   ` Rob Herring
2023-01-23 21:30 ` [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
2023-01-24  1:22   ` Rob Herring
2023-01-24  7:03     ` Heiner Kallweit [this message]
2023-01-25 16:46       ` Rob Herring
2023-01-23 21:30 ` [PATCH 8/8] dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding Heiner Kallweit
2023-01-24  1:22   ` Rob Herring
2023-01-24  7:14     ` Heiner Kallweit
2023-01-24  7:16 ` [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Neil Armstrong
2023-01-24  9:20   ` Heiner Kallweit
2023-01-26  7:40   ` Uwe Kleine-König
2023-01-24  8:22 ` (subset) " Neil Armstrong
2023-01-25 22:24 ` [PATCH v2] dt-bindings: rtc: Convert Amlogic Meson vrtc controller binding Heiner Kallweit
2023-01-30 17:09   ` Rob Herring
2023-02-09 22:16   ` (subset) " Alexandre Belloni
2023-01-25 22:28 ` [PATCH v2] dt-bindings: pwm: Convert Amlogic Meson PWM binding Heiner Kallweit
2023-01-30 17:16   ` Rob Herring
2023-01-27 21:14 ` [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
2023-01-27 21:16 ` [PATCH v2] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding Heiner Kallweit
2023-01-30 20:34 ` [PATCH v3] dt-bindings: pwm: Convert Amlogic Meson PWM binding Heiner Kallweit
2023-01-30 21:21   ` Rob Herring
2023-02-01  7:35   ` Krzysztof Kozlowski
2023-01-30 20:53 ` [PATCH v3] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
2023-02-01  2:03   ` Rob Herring
2023-02-01  6:47     ` Heiner Kallweit
2023-02-01 10:21     ` Neil Armstrong
2023-01-30 21:00 ` [PATCH v3] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding Heiner Kallweit
2023-02-01  2:06   ` Rob Herring
2023-02-01 22:13     ` Heiner Kallweit
2023-02-04 22:56       ` Martin Blumenstingl
2023-02-05  0:05         ` Heiner Kallweit
2023-02-05  7:57           ` Neil Armstrong
2023-02-05 16:54             ` Heiner Kallweit
2023-02-06  9:30               ` Neil Armstrong
2023-02-01 10:56   ` Neil Armstrong
2023-06-22  7:57 ` [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d8f0a5a9-5a16-1f63-8444-86434ff52e34@gmail.com \
    --to=hkallweit1@gmail.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=maz@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox