From: Eric B Munson <emunson@mgebm.net>
To: avi@redhat.com
Cc: mingo@redhat.com, x86@kernel.org, hpa@zytor.com,
mtosatti@redhat.com, arnd@arndb.de, linux-kernel@vger.kernel.org,
kvm@vger.kernel.org, linux-arch@vger.kernel.org,
ryanh@linux.vnet.ibm.com, aliguori@us.ibm.com,
Eric B Munson <emunson@mgebm.net>
Subject: [PATCH 6/6] Add age out of guest paused flag
Date: Tue, 25 Oct 2011 15:26:19 -0400 [thread overview]
Message-ID: <1319570779-8907-7-git-send-email-emunson@mgebm.net> (raw)
In-Reply-To: <1319570779-8907-1-git-send-email-emunson@mgebm.net>
The KVM_GUEST_PAUSED flag will prevent a guest from compaining about a soft
lockup but it can mask real soft lockups if the flag isn't cleared when it is
no longer relevant. This patch adds a kvm ioctl that the hypervisor will use
when it resumes a guest to start a timer for aging out the flag. The time out
will be specified by the hypervisor in the ioctl call.
Signed-off-by: Eric B Munson <emunson@mgebm.net>
---
arch/x86/include/asm/pvclock.h | 2 ++
arch/x86/kernel/kvmclock.c | 24 ++++++++++++++++++++++++
arch/x86/kvm/x86.c | 9 +++++++++
include/linux/kvm.h | 2 ++
include/linux/kvm_host.h | 2 ++
5 files changed, 39 insertions(+), 0 deletions(-)
diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h
index 9312814..e8460b9 100644
--- a/arch/x86/include/asm/pvclock.h
+++ b/arch/x86/include/asm/pvclock.h
@@ -18,6 +18,8 @@ void kvm_set_host_stopped(struct kvm_vcpu *vcpu);
bool kvm_check_and_clear_host_stopped(int cpu);
+void kvm_clear_guest_paused(struct kvm_vcpu *vcpu, unsigned int length);
+
/*
* Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
* yielding a 64-bit result.
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index f4fff3d..f3f3935 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -23,6 +23,8 @@
#include <asm/apic.h>
#include <linux/percpu.h>
#include <linux/kvm_host.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
#include <asm/x86_init.h>
#include <asm/reboot.h>
@@ -144,6 +146,28 @@ bool kvm_check_and_clear_host_stopped(int cpu)
return ret;
}
+static void kvm_timer_clear_guest_paused(unsigned long vcpu_addr)
+{
+ struct kvm_vcpu *vcpu = (struct kvm_vcpu *)vcpu_addr;
+ struct pvclock_vcpu_time_info *src = &vcpu->arch.hv_clock;
+ src->flags = src->flags & (!PVCLOCK_GUEST_STOPPED);
+}
+
+/*
+ * Host has resumed the guest, we need to clear the guest paused flag so we
+ * don't mask any real soft lockups.
+ */
+void kvm_clear_guest_paused(struct kvm_vcpu *vcpu, unsigned int length)
+{
+ if (!timer_pending(&vcpu->flag_timer))
+ setup_timer(&vcpu->flag_timer,
+ kvm_timer_clear_guest_paused,
+ (unsigned long)vcpu);
+ mod_timer(&vcpu->flag_timer,
+ jiffies + (length * HZ));
+}
+EXPORT_SYMBOL_GPL(kvm_clear_guest_paused);
+
static struct clocksource kvm_clock = {
.name = "kvm-clock",
.read = kvm_clock_get_cycles,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 16e029e..b907b5a 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3269,6 +3269,15 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
kvm_set_host_stopped(vcpu);
break;
}
+ case KVM_CLEAR_GUEST_PAUSED: {
+ unsigned int length;
+ r = -EFAULT;
+ if (copy_from_user(&length, argp, sizeof length))
+ goto out;
+ r = 0;
+ kvm_clear_guest_paused(vcpu, length);
+ break;
+ }
default:
r = -EINVAL;
}
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index a2697be..f333274 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -761,6 +761,8 @@ struct kvm_clock_data {
#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma)
/* VM is being stopped by host */
#define KVM_PAUSE_GUEST _IO(KVMIO, 0xaa)
+/* Start the timer to clear the paused flag */
+#define KVM_CLEAR_GUEST_PAUSED _IO(KVMIO, 0xab)
#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index eabb21a..e21be4b 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -18,6 +18,7 @@
#include <linux/msi.h>
#include <linux/slab.h>
#include <linux/rcupdate.h>
+#include <linux/timer.h>
#include <asm/signal.h>
#include <linux/kvm.h>
@@ -152,6 +153,7 @@ struct kvm_vcpu {
#endif
struct kvm_vcpu_arch arch;
+ struct timer_list flag_timer;
};
static inline int kvm_vcpu_exiting_guest_mode(struct kvm_vcpu *vcpu)
--
1.7.5.4
next prev parent reply other threads:[~2011-10-25 19:26 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-25 19:26 [PATCH 0/6] Avoid soft lockup message when KVM is stopped by host Eric B Munson
2011-10-25 19:26 ` [PATCH 1/6] Add flag to indicate that a vm was stopped by the host Eric B Munson
2011-10-25 19:26 ` Eric B Munson
2011-10-25 19:26 ` [PATCH 2/6] Add functions to check if the host has stopped the vm Eric B Munson
2011-10-25 19:26 ` Eric B Munson
2011-10-25 19:26 ` [PATCH 3/6] Add ioctl for KVM_GUEST_STOPPED Eric B Munson
2011-10-25 19:26 ` Eric B Munson
2011-10-28 1:52 ` Marcelo Tosatti
2011-10-28 13:11 ` Eric B Munson
2011-10-25 19:26 ` [PATCH 4/6] Add generic stubs for kvm stop check functions Eric B Munson
2011-10-25 19:26 ` Eric B Munson
2011-10-25 19:26 ` [PATCH 5/6] Add check for suspended vm in softlockup detector Eric B Munson
2011-10-25 19:26 ` Eric B Munson
2011-10-25 19:26 ` Eric B Munson [this message]
2011-10-28 2:14 ` [PATCH 6/6] Add age out of guest paused flag Marcelo Tosatti
2011-10-28 2:14 ` Marcelo Tosatti
2011-10-28 13:21 ` Eric B Munson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1319570779-8907-7-git-send-email-emunson@mgebm.net \
--to=emunson@mgebm.net \
--cc=aliguori@us.ibm.com \
--cc=arnd@arndb.de \
--cc=avi@redhat.com \
--cc=hpa@zytor.com \
--cc=kvm@vger.kernel.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=mtosatti@redhat.com \
--cc=ryanh@linux.vnet.ibm.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox