Generic Linux architectural discussions
 help / color / mirror / Atom feed
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
To: <linux-kernel@vger.kernel.org>, <iommu@lists.linux.dev>
Cc: <joro@8bytes.org>, <robin.murphy@arm.com>, <vasant.hegde@amd.com>,
	<arnd@arndb.de>, <ubizjak@gmail.com>,
	<linux-arch@vger.kernel.org>, <jgg@nvidia.com>,
	<kevin.tian@intel.com>, <jon.grimm@amd.com>,
	<santosh.shukla@amd.com>, <pandoh@google.com>,
	<kumaranand@google.com>,
	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Subject: [PATCH v10 02/10] iommu/amd: Disable AMD IOMMU if CMPXCHG16B feature is not supported
Date: Wed, 13 Nov 2024 12:03:19 +0000	[thread overview]
Message-ID: <20241113120327.5239-3-suravee.suthikulpanit@amd.com> (raw)
In-Reply-To: <20241113120327.5239-1-suravee.suthikulpanit@amd.com>

According to the AMD IOMMU spec, IOMMU hardware reads the entire DTE
in a single 256-bit transaction. It is recommended to update DTE using
128-bit operation followed by an INVALIDATE_DEVTAB_ENTYRY command when
the IV=1b or V=1b before the change.

According to the AMD BIOS and Kernel Developer's Guide (BDKG) dated back
to family 10h Processor [1], which is the first introduction of AMD IOMMU,
AMD processor always has CPUID Fn0000_0001_ECX[CMPXCHG16B]=1.
Therefore, it is safe to assume cmpxchg128 is available with all AMD
processor w/ IOMMU.

In addition, the CMPXCHG16B feature has already been checked separately
before enabling the GA, XT, and GAM modes. Consolidate the detection logic,
and fail the IOMMU initialization if the feature is not supported.

[1] https://www.amd.com/content/dam/amd/en/documents/archived-tech-docs/programmer-references/31116.pdf

Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 drivers/iommu/amd/init.c | 23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)

diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index 3a7b2b0472fa..c1607b29ebf4 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -1752,13 +1752,8 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h,
 		else
 			iommu->mmio_phys_end = MMIO_CNTR_CONF_OFFSET;
 
-		/*
-		 * Note: GA (128-bit IRTE) mode requires cmpxchg16b supports.
-		 * GAM also requires GA mode. Therefore, we need to
-		 * check cmpxchg16b support before enabling it.
-		 */
-		if (!boot_cpu_has(X86_FEATURE_CX16) ||
-		    ((h->efr_attr & (0x1 << IOMMU_FEAT_GASUP_SHIFT)) == 0))
+		/* GAM requires GA mode. */
+		if ((h->efr_attr & (0x1 << IOMMU_FEAT_GASUP_SHIFT)) == 0)
 			amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY;
 		break;
 	case 0x11:
@@ -1768,13 +1763,8 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h,
 		else
 			iommu->mmio_phys_end = MMIO_CNTR_CONF_OFFSET;
 
-		/*
-		 * Note: GA (128-bit IRTE) mode requires cmpxchg16b supports.
-		 * XT, GAM also requires GA mode. Therefore, we need to
-		 * check cmpxchg16b support before enabling them.
-		 */
-		if (!boot_cpu_has(X86_FEATURE_CX16) ||
-		    ((h->efr_reg & (0x1 << IOMMU_EFR_GASUP_SHIFT)) == 0)) {
+		/* XT and GAM require GA mode. */
+		if ((h->efr_reg & (0x1 << IOMMU_EFR_GASUP_SHIFT)) == 0) {
 			amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY;
 			break;
 		}
@@ -3028,6 +3018,11 @@ static int __init early_amd_iommu_init(void)
 		return -EINVAL;
 	}
 
+	if (!boot_cpu_has(X86_FEATURE_CX16)) {
+		pr_err("Failed to initialize. The CMPXCHG16B feature is required.\n");
+		return -EINVAL;
+	}
+
 	/*
 	 * Validate checksum here so we don't need to do it when
 	 * we actually parse the table
-- 
2.34.1


  parent reply	other threads:[~2024-11-13 12:04 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-13 12:03 [PATCH v10 00/10] iommu/amd: Use 128-bit cmpxchg operation to update DTE Suravee Suthikulpanit
2024-11-13 12:03 ` [PATCH v10 01/10] iommu/amd: Misc ACPI IVRS debug info clean up Suravee Suthikulpanit
2024-11-13 12:03 ` Suravee Suthikulpanit [this message]
2024-11-13 12:35   ` [PATCH v10 02/10] iommu/amd: Disable AMD IOMMU if CMPXCHG16B feature is not supported Arnd Bergmann
2024-11-13 12:03 ` [PATCH v10 03/10] compiler_types.h: Introduce 128-bit unqualified scalar type support Suravee Suthikulpanit
2024-11-13 12:03 ` [PATCH v10 04/10] iommu/amd: Introduce struct ivhd_dte_flags to store persistent DTE flags Suravee Suthikulpanit
2024-11-13 12:03 ` [PATCH v10 05/10] iommu/amd: Introduce helper function to update 256-bit DTE Suravee Suthikulpanit
2024-11-13 12:50   ` Arnd Bergmann
2024-11-13 13:20     ` Jason Gunthorpe
2024-11-13 14:06       ` Uros Bizjak
2024-11-13 14:09         ` Jason Gunthorpe
2024-11-13 14:14           ` Uros Bizjak
2024-11-13 14:28             ` Jason Gunthorpe
2024-11-13 14:36               ` Uros Bizjak
2024-11-13 16:34                 ` Jason Gunthorpe
2024-11-13 19:50                   ` Uros Bizjak
2024-11-13 20:08                     ` Uros Bizjak
2024-11-14 16:29                     ` Jason Gunthorpe
2024-11-14 20:25                       ` Uros Bizjak
2024-11-13 12:03 ` [PATCH v10 06/10] iommu/amd: Modify set_dte_entry() to use 256-bit DTE helpers Suravee Suthikulpanit
2024-11-13 12:03 ` [PATCH v10 07/10] iommu/amd: Introduce helper function get_dte256() Suravee Suthikulpanit
2024-11-13 12:03 ` [PATCH v10 08/10] iommu/amd: Modify clear_dte_entry() to avoid in-place update Suravee Suthikulpanit
2024-11-13 12:03 ` [PATCH v10 09/10] iommu/amd: Lock DTE before updating the entry with WRITE_ONCE() Suravee Suthikulpanit
2024-11-13 12:03 ` [PATCH v10 10/10] iommu/amd: Remove amd_iommu_apply_erratum_63() Suravee Suthikulpanit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241113120327.5239-3-suravee.suthikulpanit@amd.com \
    --to=suravee.suthikulpanit@amd.com \
    --cc=arnd@arndb.de \
    --cc=iommu@lists.linux.dev \
    --cc=jgg@nvidia.com \
    --cc=jon.grimm@amd.com \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=kumaranand@google.com \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pandoh@google.com \
    --cc=robin.murphy@arm.com \
    --cc=santosh.shukla@amd.com \
    --cc=ubizjak@gmail.com \
    --cc=vasant.hegde@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox