From: arnd@arndb.de (Arnd Bergmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 00/24] ILP32 for ARM64
Date: Tue, 14 Apr 2015 11:40:32 +0200 [thread overview]
Message-ID: <10153809.37pl8TnISa@wuerfel> (raw)
In-Reply-To: <332955D5-3122-437B-93A1-E1973BE09FCA@theobroma-systems.com>
On Tuesday 14 April 2015 00:58:59 Dr. Philipp Tomsich wrote:
> Arnd,
>
> > 1. Adding a whole new ABI to the kernel is adding a long-term maintenance
> > burden, and we don't want to do that just because someone thinks it's a cute
> > hack or because it might add a few percent in performance of some low-level
> > benchmark. Please describe in the cover-letter for the patch series
> > specifically what applications you have in mind that would be using this, and
> > what the expected timeframe is before users could move to 64-bit user space.
>
> There?s a couple of drivers behind getting ILP32 merged on ARM64:
> (a) There?s plenty of applications (i.e. having a large code-base, but not requiring
> a 64bit address space) that can?t readily be migrated to LP64 (typically networking
> or data-storage applications) because they were written assuming an ILP32 data
> model. Many of these applications will never become suitable for a LP64 data
> model and will remain locked into ILP32 operating environments.
> (b) A number of SPEC2006 components (i.e. not low-level benchmarks, but test
> cases that have been derived from large application use cases) benefit from
> having a denser data-representation?this includes the mcf, xalancbmk, astar
> and ometpp. This not an observation specific to ARM64 and can be observed
> on other architectures as well (e.g. [1] contains data for POWER from 2010).
> (c) Using AArch32 (assuming that any given ARMv8 processor supports it),
> is not a real alternative, as 64bit arithmetic is not supported on AArch32 and the
> AArch32 register set is significantly smaller. Our experience shows that the
> benefit of having 64bit registers, of a larger register file and of using 64bit
> arithmetic makes ILP32 a worthwhile improvement over AArch32.
>
> In summary, we believe that the need for ILP32 will never disappear on ARM64.
> In fact, I rather expect the AArch32 compatibility to eventually disapper from
> further processor designs? which will turn ILP32 into the only option for
> legacy software.
Ok, this is the kind of text that I was looking for to put in the cover letter,
and eventually into the git changelog when the branch gets merged.
Regarding a), listing specific applications would be helpful. I keep having
trouble coming up with examples that fit in all these categories:
- can be easily ported to a brand new CPU architecture
- is complex enough to to not be portable to 64-bit
- is performance sensitive enough to not work with full emulation
- fits within the memory constraints of a 32-bit task a few years from
now.
- must run on CPUs that are explicitly designed to not support 32-bit
(aarch32) tasks.
I have seen a lot of legacy code, but most of it fails at one of the
above. There is also a lot of legacy code (from MS Windows) that
already supports LLP64 but not LP64.
> > The most important aspect here I think is time_t, and while it means starting
> > out with a system call ABI that is not ready for y2038, at the same time the
> > purpose of ILP32 support is to support legacy source code that is not 64-bit
> > safe now, and using 32-bit time_t will make that easier in a lot of ways.
> > Note that I am also leading the effort to make 32-bit Linux ready for using
> > 64-bit time_t on all architectures, so ARM64 ILP32 will be fixed as well, it
> > just won't be any better or worse than the others.
>
> The decision to use the 64bit time_t actually came out of Andrew?s earliest
> patch-set from late 2013? we based the kernel-side of ILP32 on that one, while
> we focussed on getting all the other components into a working shape.
>
> Breaking the C specification (by redefining time_t) always remained a
> controversial issue on our end, as we knew that the day of switching back
> to a 32-bit time_t would eventually have to come.
Well, the reason that x32 uses a 64-bit time_t is because Linus Torvalds
intervened and asked for it to be done that way. I just think that today
we have a better plan for dealing with the issue on the whole.
I'd definitely want to get input from other parties on this. I know that
Rich Felker was particularly against the x32 definition of timespec, and
it using 32-bit time_t would let us avoid the controversy for the moment,
but of course we get to the same point later when we have to fix for
all architectures anyway.
Arnd
prev parent reply other threads:[~2015-04-14 9:40 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-13 19:44 [PATCH v4 00/24] ILP32 for ARM64 Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 01/24] arm64:ilp32: add documentation on the ILP32 ABI " Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 02/24] arm64: ensure the kernel is compiled for LP64 Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 03/24] arm64: rename COMPAT to AARCH32_EL0 in Kconfig Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 04/24] arm64: change some CONFIG_COMPAT over to use CONFIG_AARCH32_EL0 instead Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 05/24] arm64:ilp32: expose 'kernel_long' as 'long long' for ILP32 Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 06/24] arm64:uapi: set __BITS_PER_LONG correctly for ILP32 and LP64 Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 07/24] arm64:ilp32: share signal structures between ILP32 and LP64 ABIs Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 08/24] arm64:ilp32: use 64bit syscall-names for ILP32 when passing 64bit registers Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 09/24] arm64:ilp32: use non-compat syscall names for ILP32 as for LP64 Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 10/24] arm64: introduce is_a32_task and is_a32_thread (for AArch32 compat) Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 11/24] arm64:ilp32: add is_ilp32_compat_{task, thread} and TIF_32BIT_AARCH64 Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 12/24] arm64:ilp32: COMPAT_USE_64BIT_TIME is true for ILP32 tasks Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 13/24] arm64:ilp32: share HWCAP between LP64 and ILP32 Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 14/24] arm64:ilp32 use the native LP64 'start_thread' for ILP32 threads Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 15/24] arm64:ilp32: support core dump generation for ILP32 Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 16/24] arm64: add support for starting ILP32 (ELFCLASS32) binaries Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 17/24] arm64:ilp32: add vdso-ilp32 and use for signal return Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 18/24] ptrace: Allow compat to use the native siginfo Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 19/24] arm64:ilp32: add sys_ilp32.c and a separate table (in entry.S) to use it Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 20/24] arm64:ilp32: use compat-syscalls for msgsnd and msgrcv for ILP32 Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 21/24] arm64:ilp32: use the native siginfo instead of the compat siginfo Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 22/24] arm64:ilp32: use compat for stack_t Philipp Tomsich
2015-05-05 0:03 ` Pinski, Andrew
2015-04-13 19:44 ` [PATCH v4 23/24] arm64:ilp32: change COMPAT_ELF_PLATFORM to report a a subplatform for ILP32 Philipp Tomsich
2015-04-13 19:44 ` [PATCH v4 24/24] arm64:ilp32: add ARM64_ILP32 to Kconfig Philipp Tomsich
2015-04-13 21:01 ` [PATCH v4 00/24] ILP32 for ARM64 Arnd Bergmann
2015-04-13 22:58 ` Dr. Philipp Tomsich
2015-04-14 9:33 ` Dr. Philipp Tomsich
2015-04-14 10:08 ` Arnd Bergmann
2015-04-14 10:45 ` Pinski, Andrew
2015-04-14 11:14 ` Arnd Bergmann
2015-04-14 11:50 ` Dr. Philipp Tomsich
2015-04-14 14:07 ` Arnd Bergmann
2015-04-14 14:54 ` Dr. Philipp Tomsich
2015-04-15 12:25 ` Arnd Bergmann
2015-04-14 15:00 ` Catalin Marinas
2015-04-14 22:28 ` Arnd Bergmann
2015-04-15 9:18 ` Dr. Philipp Tomsich
2015-04-15 10:01 ` Catalin Marinas
2015-04-15 15:15 ` Arnd Bergmann
2015-04-15 15:38 ` Catalin Marinas
2015-04-15 17:01 ` Dr. Philipp Tomsich
2015-04-15 17:22 ` Catalin Marinas
2015-04-15 22:25 ` Alexander Graf
2015-04-16 11:03 ` Catalin Marinas
2015-04-16 11:19 ` Dr. Philipp Tomsich
2015-04-16 11:33 ` Pinski, Andrew
2015-04-16 13:31 ` Catalin Marinas
2015-04-16 15:21 ` Arnd Bergmann
2015-04-17 9:01 ` Catalin Marinas
2015-04-17 13:17 ` Arnd Bergmann
2015-04-17 14:06 ` Alexander Graf
2015-04-17 14:46 ` Catalin Marinas
2015-04-17 15:15 ` Dr. Philipp Tomsich
2015-04-18 19:24 ` Arnd Bergmann
2015-05-04 10:29 ` Arnd Bergmann
2015-05-04 10:32 ` Dr. Philipp Tomsich
2015-05-04 14:43 ` Arnd Bergmann
2015-05-05 13:11 ` Arnd Bergmann
2015-04-17 15:49 ` Arnd Bergmann
2015-04-20 15:56 ` Catalin Marinas
2015-04-20 17:40 ` Arnd Bergmann
2015-04-20 14:37 ` Zhangjian (Bamvor)
2015-04-16 14:27 ` Catalin Marinas
2015-04-14 11:51 ` Pinski, Andrew
2015-04-14 14:56 ` Catalin Marinas
2015-04-14 13:38 ` Catalin Marinas
2015-04-14 14:47 ` Catalin Marinas
2015-04-14 15:29 ` Dr. Philipp Tomsich
2015-04-14 16:55 ` Catalin Marinas
2015-04-15 10:31 ` Dr. Philipp Tomsich
2015-04-15 12:47 ` Arnd Bergmann
2015-04-15 12:42 ` Arnd Bergmann
2015-04-14 15:44 ` Arnd Bergmann
2015-04-15 11:22 ` Catalin Marinas
2015-04-15 11:50 ` Dr. Philipp Tomsich
2015-04-15 15:49 ` Catalin Marinas
2015-04-14 9:40 ` Arnd Bergmann [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10153809.37pl8TnISa@wuerfel \
--to=arnd@arndb.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox