From: t.figa@samsung.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/15] pinctrl: samsung: Remove static pin enumerations
Date: Thu, 11 Oct 2012 10:11:10 +0200 [thread overview]
Message-ID: <1349943081-27939-5-git-send-email-t.figa@samsung.com> (raw)
In-Reply-To: <1349943081-27939-1-git-send-email-t.figa@samsung.com>
Since pin numbers are now assigned dynamically, those are not needed
anymore.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
---
drivers/pinctrl/pinctrl-exynos.h | 119 ---------------------------------------
1 file changed, 119 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h
index 1788467..2de4a29 100644
--- a/drivers/pinctrl/pinctrl-exynos.h
+++ b/drivers/pinctrl/pinctrl-exynos.h
@@ -17,125 +17,6 @@
* (at your option) any later version.
*/
-#define EXYNOS_GPIO_START(__gpio) ((__gpio##_START) + (__gpio##_NR))
-
-#define EXYNOS4210_GPIO_A0_NR (8)
-#define EXYNOS4210_GPIO_A1_NR (6)
-#define EXYNOS4210_GPIO_B_NR (8)
-#define EXYNOS4210_GPIO_C0_NR (5)
-#define EXYNOS4210_GPIO_C1_NR (5)
-#define EXYNOS4210_GPIO_D0_NR (4)
-#define EXYNOS4210_GPIO_D1_NR (4)
-#define EXYNOS4210_GPIO_E0_NR (5)
-#define EXYNOS4210_GPIO_E1_NR (8)
-#define EXYNOS4210_GPIO_E2_NR (6)
-#define EXYNOS4210_GPIO_E3_NR (8)
-#define EXYNOS4210_GPIO_E4_NR (8)
-#define EXYNOS4210_GPIO_F0_NR (8)
-#define EXYNOS4210_GPIO_F1_NR (8)
-#define EXYNOS4210_GPIO_F2_NR (8)
-#define EXYNOS4210_GPIO_F3_NR (6)
-#define EXYNOS4210_GPIO_J0_NR (8)
-#define EXYNOS4210_GPIO_J1_NR (5)
-#define EXYNOS4210_GPIO_K0_NR (7)
-#define EXYNOS4210_GPIO_K1_NR (7)
-#define EXYNOS4210_GPIO_K2_NR (7)
-#define EXYNOS4210_GPIO_K3_NR (7)
-#define EXYNOS4210_GPIO_L0_NR (8)
-#define EXYNOS4210_GPIO_L1_NR (3)
-#define EXYNOS4210_GPIO_L2_NR (8)
-#define EXYNOS4210_GPIO_Y0_NR (6)
-#define EXYNOS4210_GPIO_Y1_NR (4)
-#define EXYNOS4210_GPIO_Y2_NR (6)
-#define EXYNOS4210_GPIO_Y3_NR (8)
-#define EXYNOS4210_GPIO_Y4_NR (8)
-#define EXYNOS4210_GPIO_Y5_NR (8)
-#define EXYNOS4210_GPIO_Y6_NR (8)
-#define EXYNOS4210_GPIO_X0_NR (8)
-#define EXYNOS4210_GPIO_X1_NR (8)
-#define EXYNOS4210_GPIO_X2_NR (8)
-#define EXYNOS4210_GPIO_X3_NR (8)
-#define EXYNOS4210_GPIO_Z_NR (7)
-
-enum exynos4210_gpio_xa_start {
- EXYNOS4210_GPIO_A0_START = 0,
- EXYNOS4210_GPIO_A1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A0),
- EXYNOS4210_GPIO_B_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A1),
- EXYNOS4210_GPIO_C0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_B),
- EXYNOS4210_GPIO_C1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C0),
- EXYNOS4210_GPIO_D0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C1),
- EXYNOS4210_GPIO_D1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D0),
- EXYNOS4210_GPIO_E0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D1),
- EXYNOS4210_GPIO_E1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E0),
- EXYNOS4210_GPIO_E2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E1),
- EXYNOS4210_GPIO_E3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E2),
- EXYNOS4210_GPIO_E4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E3),
- EXYNOS4210_GPIO_F0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E4),
- EXYNOS4210_GPIO_F1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F0),
- EXYNOS4210_GPIO_F2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F1),
- EXYNOS4210_GPIO_F3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F2),
-};
-
-enum exynos4210_gpio_xb_start {
- EXYNOS4210_GPIO_J0_START = 0,
- EXYNOS4210_GPIO_J1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J0),
- EXYNOS4210_GPIO_K0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J1),
- EXYNOS4210_GPIO_K1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K0),
- EXYNOS4210_GPIO_K2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K1),
- EXYNOS4210_GPIO_K3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K2),
- EXYNOS4210_GPIO_L0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K3),
- EXYNOS4210_GPIO_L1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L0),
- EXYNOS4210_GPIO_L2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L1),
- EXYNOS4210_GPIO_Y0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2),
- EXYNOS4210_GPIO_Y1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y0),
- EXYNOS4210_GPIO_Y2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y1),
- EXYNOS4210_GPIO_Y3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y2),
- EXYNOS4210_GPIO_Y4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y3),
- EXYNOS4210_GPIO_Y5_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y4),
- EXYNOS4210_GPIO_Y6_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y5),
- EXYNOS4210_GPIO_X0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y6),
- EXYNOS4210_GPIO_X1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X0),
- EXYNOS4210_GPIO_X2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X1),
- EXYNOS4210_GPIO_X3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X2),
-};
-
-enum exynos4210_gpio_xc_start {
- EXYNOS4210_GPIO_Z_START = 0,
-};
-
-#define EXYNOS4210_GPIO_A0_IRQ EXYNOS4210_GPIO_A0_START
-#define EXYNOS4210_GPIO_A1_IRQ EXYNOS4210_GPIO_A1_START
-#define EXYNOS4210_GPIO_B_IRQ EXYNOS4210_GPIO_B_START
-#define EXYNOS4210_GPIO_C0_IRQ EXYNOS4210_GPIO_C0_START
-#define EXYNOS4210_GPIO_C1_IRQ EXYNOS4210_GPIO_C1_START
-#define EXYNOS4210_GPIO_D0_IRQ EXYNOS4210_GPIO_D0_START
-#define EXYNOS4210_GPIO_D1_IRQ EXYNOS4210_GPIO_D1_START
-#define EXYNOS4210_GPIO_E0_IRQ EXYNOS4210_GPIO_E0_START
-#define EXYNOS4210_GPIO_E1_IRQ EXYNOS4210_GPIO_E1_START
-#define EXYNOS4210_GPIO_E2_IRQ EXYNOS4210_GPIO_E2_START
-#define EXYNOS4210_GPIO_E3_IRQ EXYNOS4210_GPIO_E3_START
-#define EXYNOS4210_GPIO_E4_IRQ EXYNOS4210_GPIO_E4_START
-#define EXYNOS4210_GPIO_F0_IRQ EXYNOS4210_GPIO_F0_START
-#define EXYNOS4210_GPIO_F1_IRQ EXYNOS4210_GPIO_F1_START
-#define EXYNOS4210_GPIO_F2_IRQ EXYNOS4210_GPIO_F2_START
-#define EXYNOS4210_GPIO_F3_IRQ EXYNOS4210_GPIO_F3_START
-#define EXYNOS4210_GPIO_J0_IRQ EXYNOS4210_GPIO_J0_START
-#define EXYNOS4210_GPIO_J1_IRQ EXYNOS4210_GPIO_J1_START
-#define EXYNOS4210_GPIO_K0_IRQ EXYNOS4210_GPIO_K0_START
-#define EXYNOS4210_GPIO_K1_IRQ EXYNOS4210_GPIO_K1_START
-#define EXYNOS4210_GPIO_K2_IRQ EXYNOS4210_GPIO_K2_START
-#define EXYNOS4210_GPIO_K3_IRQ EXYNOS4210_GPIO_K3_START
-#define EXYNOS4210_GPIO_L0_IRQ EXYNOS4210_GPIO_L0_START
-#define EXYNOS4210_GPIO_L1_IRQ EXYNOS4210_GPIO_L1_START
-#define EXYNOS4210_GPIO_L2_IRQ EXYNOS4210_GPIO_L2_START
-#define EXYNOS4210_GPIO_Z_IRQ EXYNOS4210_GPIO_Z_START
-
-#define EXYNOS4210_GPIOA_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3)
-#define EXYNOS4210_GPIOA_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3)
-#define EXYNOS4210_GPIOB_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_X3)
-#define EXYNOS4210_GPIOB_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2)
-#define EXYNOS4210_GPIOC_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_Z)
-
/* External GPIO and wakeup interrupt related definitions */
#define EXYNOS_GPIO_ECON_OFFSET 0x700
#define EXYNOS_GPIO_EMASK_OFFSET 0x900
--
1.7.12
next prev parent reply other threads:[~2012-10-11 8:11 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-11 8:11 [PATCH v2 00/15] pinctrl: samsung: Usability and extensibiltiy improvements Tomasz Figa
2012-10-11 8:11 ` [PATCH 01/15] pinctrl: samsung: Detect and handle unsupported configuration types Tomasz Figa
2012-10-11 13:57 ` Linus Walleij
2012-10-11 14:00 ` Kyungmin Park
2012-10-11 14:06 ` Linus Walleij
2012-10-11 8:11 ` [PATCH 02/15] pinctrl: samsung: Do not pass gpio_chip to pin_to_reg_bank Tomasz Figa
2012-10-11 8:11 ` [PATCH 03/15] pinctrl: samsung: Assing pin numbers dynamically Tomasz Figa
2012-10-11 8:11 ` Tomasz Figa [this message]
2012-10-11 8:11 ` [PATCH 05/15] pinctrl: samsung: Distinguish between pin group and bank nodes Tomasz Figa
2012-10-11 8:11 ` [PATCH 06/15] ARM: dts: exynos4210-pinctrl: Add nodes for pin banks Tomasz Figa
2012-10-11 8:11 ` [PATCH 07/15] pinctrl: samsung: Match pin banks with their device nodes Tomasz Figa
2012-10-11 8:11 ` [PATCH 08/15] pinctrl: samsung: Hold pointer to driver data in bank struct Tomasz Figa
2012-10-11 8:11 ` [PATCH 09/15] pinctrl: samsung: Include bank-specific eint offset " Tomasz Figa
2012-10-11 8:11 ` [PATCH 10/15] pinctrl: exynos: Use one IRQ domain per pin bank Tomasz Figa
2012-10-11 8:11 ` [PATCH 11/15] pinctrl: samsung: Use one GPIO chip " Tomasz Figa
2012-10-11 8:11 ` [PATCH 12/15] pinctrl: samsung: Use per-bank IRQ domain for wake-up interrupts Tomasz Figa
2012-10-11 8:11 ` [PATCH 13/15] pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT Tomasz Figa
2012-10-11 8:11 ` [PATCH 14/15] pinctrl: samsung: Add GPIO to IRQ translation Tomasz Figa
2012-10-11 8:11 ` [PATCH 15/15] Documentation: Update samsung-pinctrl device tree bindings documentation Tomasz Figa
2012-10-11 9:01 ` [PATCH v2 00/15] pinctrl: samsung: Usability and extensibiltiy improvements Kyungmin Park
2012-10-11 12:50 ` Thomas Abraham
2012-10-11 14:05 ` Linus Walleij
2012-10-11 14:20 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349943081-27939-5-git-send-email-t.figa@samsung.com \
--to=t.figa@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox