From: t.figa@samsung.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 06/15] ARM: dts: exynos4210-pinctrl: Add nodes for pin banks
Date: Thu, 11 Oct 2012 10:11:12 +0200 [thread overview]
Message-ID: <1349943081-27939-7-git-send-email-t.figa@samsung.com> (raw)
In-Reply-To: <1349943081-27939-1-git-send-email-t.figa@samsung.com>
This patch is a preparation for converting the pinctrl-samsung driver to
one GPIO chip and IRQ domain per bank. It allows particular banks to be
specified using their phandles.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
---
arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 272 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos4210.dtsi | 229 -------------------------
2 files changed, 272 insertions(+), 229 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index b12cf27..f207d8d 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -16,6 +16,134 @@
/ {
pinctrl at 11400000 {
+ gpa0: gpa0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa1: gpa1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb: gpb {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc0: gpc0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc1: gpc1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd0: gpd0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd1: gpd1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpe0: gpe0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpe1: gpe1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpe2: gpe2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpe3: gpe3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpe4: gpe4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf0: gpf0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf1: gpf1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf2: gpf2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf3: gpf3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <0x2>;
@@ -205,6 +333,145 @@
};
pinctrl at 11000000 {
+ gpj0: gpj0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpj1: gpj1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpk0: gpk0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpk1: gpk1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpk2: gpk2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpk3: gpk3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpl0: gpl0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpl1: gpl1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpl2: gpl2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpy0: gpy0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy1: gpy1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy2: gpy2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy3: gpy3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy4: gpy4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy5: gpy5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy6: gpy6 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpx0: gpx0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx1: gpx1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx2: gpx2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx3: gpx3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
sd0_clk: sd0-clk {
samsung,pins = "gpk0-0";
samsung,pin-function = <2>;
@@ -438,6 +705,11 @@
};
pinctrl at 03860000 {
+ gpz: gpz {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
i2s0_bus: i2s0-bus {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 214c557..b768e9f 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -74,233 +74,4 @@
compatible = "samsung,pinctrl-exynos4210";
reg = <0x03860000 0x1000>;
};
-
- gpio-controllers {
- #address-cells = <1>;
- #size-cells = <1>;
- gpio-controller;
- ranges;
-
- gpa0: gpio-controller at 11400000 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400000 0x20>;
- #gpio-cells = <4>;
- };
-
- gpa1: gpio-controller at 11400020 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400020 0x20>;
- #gpio-cells = <4>;
- };
-
- gpb: gpio-controller at 11400040 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400040 0x20>;
- #gpio-cells = <4>;
- };
-
- gpc0: gpio-controller at 11400060 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400060 0x20>;
- #gpio-cells = <4>;
- };
-
- gpc1: gpio-controller at 11400080 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400080 0x20>;
- #gpio-cells = <4>;
- };
-
- gpd0: gpio-controller at 114000A0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114000A0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpd1: gpio-controller at 114000C0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114000C0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpe0: gpio-controller at 114000E0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114000E0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpe1: gpio-controller at 11400100 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400100 0x20>;
- #gpio-cells = <4>;
- };
-
- gpe2: gpio-controller at 11400120 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400120 0x20>;
- #gpio-cells = <4>;
- };
-
- gpe3: gpio-controller at 11400140 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400140 0x20>;
- #gpio-cells = <4>;
- };
-
- gpe4: gpio-controller at 11400160 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400160 0x20>;
- #gpio-cells = <4>;
- };
-
- gpf0: gpio-controller at 11400180 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400180 0x20>;
- #gpio-cells = <4>;
- };
-
- gpf1: gpio-controller at 114001A0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114001A0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpf2: gpio-controller at 114001C0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114001C0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpf3: gpio-controller at 114001E0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114001E0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpj0: gpio-controller at 11000000 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000000 0x20>;
- #gpio-cells = <4>;
- };
-
- gpj1: gpio-controller at 11000020 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000020 0x20>;
- #gpio-cells = <4>;
- };
-
- gpk0: gpio-controller at 11000040 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000040 0x20>;
- #gpio-cells = <4>;
- };
-
- gpk1: gpio-controller at 11000060 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000060 0x20>;
- #gpio-cells = <4>;
- };
-
- gpk2: gpio-controller at 11000080 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000080 0x20>;
- #gpio-cells = <4>;
- };
-
- gpk3: gpio-controller at 110000A0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x110000A0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpl0: gpio-controller at 110000C0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x110000C0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpl1: gpio-controller at 110000E0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x110000E0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpl2: gpio-controller at 11000100 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000100 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy0: gpio-controller at 11000120 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000120 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy1: gpio-controller at 11000140 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000140 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy2: gpio-controller at 11000160 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000160 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy3: gpio-controller at 11000180 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000180 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy4: gpio-controller at 110001A0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x110001A0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy5: gpio-controller at 110001C0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x110001C0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy6: gpio-controller at 110001E0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x110001E0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpx0: gpio-controller at 11000C00 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000C00 0x20>;
- #gpio-cells = <4>;
- };
-
- gpx1: gpio-controller at 11000C20 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000C20 0x20>;
- #gpio-cells = <4>;
- };
-
- gpx2: gpio-controller at 11000C40 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000C40 0x20>;
- #gpio-cells = <4>;
- };
-
- gpx3: gpio-controller at 11000C60 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000C60 0x20>;
- #gpio-cells = <4>;
- };
-
- gpz: gpio-controller at 03860000 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x03860000 0x20>;
- #gpio-cells = <4>;
- };
- };
};
--
1.7.12
next prev parent reply other threads:[~2012-10-11 8:11 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-11 8:11 [PATCH v2 00/15] pinctrl: samsung: Usability and extensibiltiy improvements Tomasz Figa
2012-10-11 8:11 ` [PATCH 01/15] pinctrl: samsung: Detect and handle unsupported configuration types Tomasz Figa
2012-10-11 13:57 ` Linus Walleij
2012-10-11 14:00 ` Kyungmin Park
2012-10-11 14:06 ` Linus Walleij
2012-10-11 8:11 ` [PATCH 02/15] pinctrl: samsung: Do not pass gpio_chip to pin_to_reg_bank Tomasz Figa
2012-10-11 8:11 ` [PATCH 03/15] pinctrl: samsung: Assing pin numbers dynamically Tomasz Figa
2012-10-11 8:11 ` [PATCH 04/15] pinctrl: samsung: Remove static pin enumerations Tomasz Figa
2012-10-11 8:11 ` [PATCH 05/15] pinctrl: samsung: Distinguish between pin group and bank nodes Tomasz Figa
2012-10-11 8:11 ` Tomasz Figa [this message]
2012-10-11 8:11 ` [PATCH 07/15] pinctrl: samsung: Match pin banks with their device nodes Tomasz Figa
2012-10-11 8:11 ` [PATCH 08/15] pinctrl: samsung: Hold pointer to driver data in bank struct Tomasz Figa
2012-10-11 8:11 ` [PATCH 09/15] pinctrl: samsung: Include bank-specific eint offset " Tomasz Figa
2012-10-11 8:11 ` [PATCH 10/15] pinctrl: exynos: Use one IRQ domain per pin bank Tomasz Figa
2012-10-11 8:11 ` [PATCH 11/15] pinctrl: samsung: Use one GPIO chip " Tomasz Figa
2012-10-11 8:11 ` [PATCH 12/15] pinctrl: samsung: Use per-bank IRQ domain for wake-up interrupts Tomasz Figa
2012-10-11 8:11 ` [PATCH 13/15] pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT Tomasz Figa
2012-10-11 8:11 ` [PATCH 14/15] pinctrl: samsung: Add GPIO to IRQ translation Tomasz Figa
2012-10-11 8:11 ` [PATCH 15/15] Documentation: Update samsung-pinctrl device tree bindings documentation Tomasz Figa
2012-10-11 9:01 ` [PATCH v2 00/15] pinctrl: samsung: Usability and extensibiltiy improvements Kyungmin Park
2012-10-11 12:50 ` Thomas Abraham
2012-10-11 14:05 ` Linus Walleij
2012-10-11 14:20 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349943081-27939-7-git-send-email-t.figa@samsung.com \
--to=t.figa@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox