Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: balbi@ti.com (Felipe Balbi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] mmc: omap_hsmmc: introduce omap_hsmmc_prepare/complete
Date: Tue, 6 Nov 2012 18:34:09 +0200	[thread overview]
Message-ID: <1352219649-4460-1-git-send-email-balbi@ti.com> (raw)
In-Reply-To: <CAOyx1Lr1g=5RrOZdUiUcgWU0wjoNnpzH6Hr5JfqK8s0n5uoShw@mail.gmail.com>

prepare() is supposed to prevent new children from
being registered. On the MMC subsystem, children
(new cards) registration starts with the card
detect IRQ.

Move card detect IRQ disabling to prepare() so that
no new cards will be registered while we're trying
to suspend.

Likewise, move card detect IRQ enabling to complete()
so we only try to register new children after our MMC
IP is back up.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---

Fixed ->complete() prototype.

 drivers/mmc/host/omap_hsmmc.c | 43 +++++++++++++++++++++++--------------------
 1 file changed, 23 insertions(+), 20 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 54bfd0c..d2d6a56 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2022,6 +2022,24 @@ static int __devexit omap_hsmmc_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
+static int omap_hsmmc_prepare(struct device *dev)
+{
+	struct omap_hsmmc_host *host = dev_get_drvdata(dev);
+
+	if (host->pdata->suspend)
+		return host->pdata->suspend(dev, host->slot_id);
+
+	return 0;
+}
+
+static void omap_hsmmc_complete(struct device *dev)
+{
+	struct omap_hsmmc_host *host = dev_get_drvdata(dev);
+
+	if (host->pdata->resume)
+		host->pdata->resume(dev, host->slot_id);
+}
+
 static int omap_hsmmc_suspend(struct device *dev)
 {
 	int ret = 0;
@@ -2035,23 +2053,10 @@ static int omap_hsmmc_suspend(struct device *dev)
 
 	pm_runtime_get_sync(host->dev);
 	host->suspended = 1;
-	if (host->pdata->suspend) {
-		ret = host->pdata->suspend(dev, host->slot_id);
-		if (ret) {
-			dev_dbg(dev, "Unable to handle MMC board"
-					" level suspend\n");
-			host->suspended = 0;
-			return ret;
-		}
-	}
 	ret = mmc_suspend_host(host->mmc);
 
 	if (ret) {
 		host->suspended = 0;
-		if (host->pdata->resume) {
-			if (host->pdata->resume(dev, host->slot_id))
-				dev_dbg(dev, "Unmask interrupt failed\n");
-		}
 		goto err;
 	}
 
@@ -2088,12 +2093,6 @@ static int omap_hsmmc_resume(struct device *dev)
 	if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER))
 		omap_hsmmc_conf_bus_power(host);
 
-	if (host->pdata->resume) {
-		ret = host->pdata->resume(dev, host->slot_id);
-		if (ret)
-			dev_dbg(dev, "Unmask interrupt failed\n");
-	}
-
 	omap_hsmmc_protect_card(host);
 
 	/* Notify the core to resume the host */
@@ -2109,8 +2108,10 @@ static int omap_hsmmc_resume(struct device *dev)
 }
 
 #else
+#define omap_hsmmc_prepare	NULL
+#define omap_hsmmc_complete	NULL
 #define omap_hsmmc_suspend	NULL
-#define omap_hsmmc_resume		NULL
+#define omap_hsmmc_resume	NULL
 #endif
 
 static int omap_hsmmc_runtime_suspend(struct device *dev)
@@ -2138,6 +2139,8 @@ static int omap_hsmmc_runtime_resume(struct device *dev)
 static struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
 	.suspend	= omap_hsmmc_suspend,
 	.resume		= omap_hsmmc_resume,
+	.prepare	= omap_hsmmc_prepare,
+	.complete	= omap_hsmmc_complete,
 	.runtime_suspend = omap_hsmmc_runtime_suspend,
 	.runtime_resume = omap_hsmmc_runtime_resume,
 };
-- 
1.8.0

      reply	other threads:[~2012-11-06 16:34 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-22 12:59 [RFC/PATCH] mmc: omap_hsmmc: introduce omap_hsmmc_prepare/complete Felipe Balbi
2012-10-22 13:27 ` Felipe Balbi
2012-10-25 18:04   ` Felipe Balbi
2012-10-26 11:15     ` Venkatraman S
2012-11-06 15:50 ` Venkatraman S
2012-11-06 16:34   ` Felipe Balbi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1352219649-4460-1-git-send-email-balbi@ti.com \
    --to=balbi@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox