From: balbi@ti.com (Felipe Balbi)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC/PATCH] mmc: omap_hsmmc: introduce omap_hsmmc_prepare/complete
Date: Thu, 25 Oct 2012 21:04:18 +0300 [thread overview]
Message-ID: <20121025180418.GB18046@arwen.pp.htv.fi> (raw)
In-Reply-To: <20121022132708.GA14033@arwen.pp.htv.fi>
Hi,
On Mon, Oct 22, 2012 at 04:27:08PM +0300, Felipe Balbi wrote:
> On Mon, Oct 22, 2012 at 03:59:28PM +0300, Felipe Balbi wrote:
> > prepare() is supposed to prevent new children from
> > being registered. On the MMC subsystem, children
> > (new cards) registration starts with the card
> > detect IRQ.
> >
> > Move card detect IRQ disabling to prepare() so that
> > no new cards will be registered while we're trying
> > to suspend.
> >
> > Likewise, move card detect IRQ enabling to complete()
> > so we only try to register new children after our MMC
> > IP is back up.
> >
> > Signed-off-by: Felipe Balbi <balbi@ti.com>
> > ---
> >
> > Venkat, do you think the patch below makes sense ?
>
> btw, just checked suspend to ram with beagle and panda. We still have
> our filesystem after waking up.
>
> ps: you will [1] to test it:
>
> [1] http://marc.info/?l=linux-arm-kernel&m=135090724817604&w=2
ping
>
> > diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> > index 54bfd0c..4c8b41e 100644
> > --- a/drivers/mmc/host/omap_hsmmc.c
> > +++ b/drivers/mmc/host/omap_hsmmc.c
> > @@ -2022,6 +2022,26 @@ static int __devexit omap_hsmmc_remove(struct platform_device *pdev)
> > }
> >
> > #ifdef CONFIG_PM
> > +static int omap_hsmmc_prepare(struct device *dev)
> > +{
> > + struct omap_hsmmc_host *host = dev_get_drvdata(dev);
> > +
> > + if (host->pdata->suspend)
> > + return host->pdata->suspend(dev, host->slot_id);
> > +
> > + return 0;
> > +}
> > +
> > +static int omap_hsmmc_complete(struct device *dev)
> > +{
> > + struct omap_hsmmc_host *host = dev_get_drvdata(dev);
> > +
> > + if (host->pdata->resume)
> > + return host->pdata->resume(dev, host->slot_id);
> > +
> > + return 0;
> > +}
> > +
> > static int omap_hsmmc_suspend(struct device *dev)
> > {
> > int ret = 0;
> > @@ -2035,23 +2055,10 @@ static int omap_hsmmc_suspend(struct device *dev)
> >
> > pm_runtime_get_sync(host->dev);
> > host->suspended = 1;
> > - if (host->pdata->suspend) {
> > - ret = host->pdata->suspend(dev, host->slot_id);
> > - if (ret) {
> > - dev_dbg(dev, "Unable to handle MMC board"
> > - " level suspend\n");
> > - host->suspended = 0;
> > - return ret;
> > - }
> > - }
> > ret = mmc_suspend_host(host->mmc);
> >
> > if (ret) {
> > host->suspended = 0;
> > - if (host->pdata->resume) {
> > - if (host->pdata->resume(dev, host->slot_id))
> > - dev_dbg(dev, "Unmask interrupt failed\n");
> > - }
> > goto err;
> > }
> >
> > @@ -2088,12 +2095,6 @@ static int omap_hsmmc_resume(struct device *dev)
> > if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER))
> > omap_hsmmc_conf_bus_power(host);
> >
> > - if (host->pdata->resume) {
> > - ret = host->pdata->resume(dev, host->slot_id);
> > - if (ret)
> > - dev_dbg(dev, "Unmask interrupt failed\n");
> > - }
> > -
> > omap_hsmmc_protect_card(host);
> >
> > /* Notify the core to resume the host */
> > @@ -2109,8 +2110,10 @@ static int omap_hsmmc_resume(struct device *dev)
> > }
> >
> > #else
> > +#define omap_hsmmc_prepare NULL
> > +#define omap_hsmmc_complete NULL
> > #define omap_hsmmc_suspend NULL
> > -#define omap_hsmmc_resume NULL
> > +#define omap_hsmmc_resume NULL
> > #endif
> >
> > static int omap_hsmmc_runtime_suspend(struct device *dev)
> > @@ -2138,6 +2141,8 @@ static int omap_hsmmc_runtime_resume(struct device *dev)
> > static struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
> > .suspend = omap_hsmmc_suspend,
> > .resume = omap_hsmmc_resume,
> > + .prepare = omap_hsmmc_prepare,
> > + .complete = omap_hsmmc_complete,
> > .runtime_suspend = omap_hsmmc_runtime_suspend,
> > .runtime_resume = omap_hsmmc_runtime_resume,
> > };
> > --
> > 1.8.0.rc0
> >
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20121025/58d5fb70/attachment.sig>
next prev parent reply other threads:[~2012-10-25 18:04 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-22 12:59 [RFC/PATCH] mmc: omap_hsmmc: introduce omap_hsmmc_prepare/complete Felipe Balbi
2012-10-22 13:27 ` Felipe Balbi
2012-10-25 18:04 ` Felipe Balbi [this message]
2012-10-26 11:15 ` Venkatraman S
2012-11-06 15:50 ` Venkatraman S
2012-11-06 16:34 ` [PATCH v2] " Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121025180418.GB18046@arwen.pp.htv.fi \
--to=balbi@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox