From: kgene.kim@samsung.com (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 20/26] ARM: S3C24XX: remove dsc.c and make regs-dsc.h local
Date: Wed, 02 Jan 2013 14:23:57 -0800 [thread overview]
Message-ID: <1357165443-3716-21-git-send-email-kgene.kim@samsung.com> (raw)
In-Reply-To: <1357165443-3716-1-git-send-email-kgene.kim@samsung.com>
The mach-s3c2440/dsc.c is no longer used and the header, regs-dsc.h
can be local in mach-s3c24xx/.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-s3c2440/Makefile | 2 -
arch/arm/mach-s3c2440/dsc.c | 54 --------------------
arch/arm/mach-s3c24xx/pm-s3c2412.c | 8 +--
.../arm/mach-s3c24xx/{include/mach => }/regs-dsc.h | 0
arch/arm/mach-s3c24xx/s3c2412.c | 3 +-
arch/arm/mach-s3c24xx/s3c244x.c | 3 +-
6 files changed, 8 insertions(+), 62 deletions(-)
delete mode 100644 arch/arm/mach-s3c2440/dsc.c
rename arch/arm/mach-s3c24xx/{include/mach => }/regs-dsc.h (100%)
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index c460924..0ddd17f 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -9,8 +9,6 @@ obj-m :=
obj-n :=
obj- :=
-obj-$(CONFIG_CPU_S3C2440) += dsc.o
-
obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
deleted file mode 100644
index 9ea66e3..0000000
--- a/arch/arm/mach-s3c2440/dsc.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/dsc.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 Drive Strength Control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
-
-#include <plat/cpu.h>
-#include <plat/s3c244x.h>
-
-int s3c2440_set_dsc(unsigned int pin, unsigned int value)
-{
- void __iomem *base;
- unsigned long val;
- unsigned long flags;
- unsigned long mask;
-
- base = (pin & S3C2440_SELECT_DSC1) ? S3C2440_DSC1 : S3C2440_DSC0;
- mask = 3 << S3C2440_DSC_GETSHIFT(pin);
-
- local_irq_save(flags);
-
- val = __raw_readl(base);
- val &= ~mask;
- val |= value & mask;
- __raw_writel(val, base);
-
- local_irq_restore(flags);
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2440_set_dsc);
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c
index c60f67a..206765c 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c
@@ -21,19 +21,19 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/cacheflush.h>
#include <asm/irq.h>
-#include <mach/regs-power.h>
+#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
+#include <mach/regs-power.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-
#include <plat/s3c2412.h>
+#include "regs-dsc.h"
+
extern void s3c2412_sleep_enter(void);
static int s3c2412_cpu_suspend(unsigned long arg)
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h b/arch/arm/mach-s3c24xx/regs-dsc.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/include/mach/regs-dsc.h
rename to arch/arm/mach-s3c24xx/regs-dsc.h
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index 26ab760..c511a22 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -33,7 +33,6 @@
#include <mach/hardware.h>
#include <mach/regs-clock.h>
-#include <mach/regs-dsc.h>
#include <mach/regs-gpio.h>
#include <mach/regs-power.h>
@@ -48,6 +47,8 @@
#include <plat/regs-spi.h>
#include <plat/s3c2412.h>
+#include "regs-dsc.h"
+
#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30)
#define S3C2412_SWRST_RESET (0x533C2412)
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index b0b60a1..ad2671b 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -36,7 +36,6 @@
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
#include <plat/s3c2410.h>
#include <plat/s3c244x.h>
@@ -48,6 +47,8 @@
#include <plat/nand-core.h>
#include <plat/watchdog-reset.h>
+#include "regs-dsc.h"
+
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
IODESC_ENT(TIMER),
--
1.7.10.4
next prev parent reply other threads:[~2013-01-02 22:23 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-02 22:23 [PATCH 00/26] ARM: SAMSUNG: cleanup header files Kukjin Kim
2013-01-02 22:23 ` [PATCH 01/26] gpio: samsung: remove inclusion <mach/regs-clock.h> Kukjin Kim
2013-01-10 10:52 ` Linus Walleij
2013-01-10 18:41 ` Kukjin Kim
2013-01-17 10:50 ` Linus Walleij
2013-01-02 22:23 ` [PATCH 02/26] cpufreq: exynos: cleanup exynos-cpufreq header Kukjin Kim
2013-01-02 22:23 ` [PATCH 03/26] ARM: S5P64X0: remove gpiolib.c file in mach-s5p64x0 Kukjin Kim
2013-01-02 22:23 ` [PATCH 04/26] ARM: S5P64X0: move i2c.h into local directory Kukjin Kim
2013-01-02 22:23 ` [PATCH 05/26] ARM: S5P64X0: move s5p64x0-clock.h " Kukjin Kim
2013-01-02 22:23 ` [PATCH 06/26] ARM: S5PV210: move regs-sys.h into setup-usb-phy.c file Kukjin Kim
2013-01-02 22:23 ` [PATCH 07/26] ARM: EXYNOS: move mach/pmu.h file into common.h Kukjin Kim
2013-01-02 22:23 ` [PATCH 08/26] ARM: SAMSUNG: cleanup mach/regs-audss.h file Kukjin Kim
2013-01-02 22:23 ` [PATCH 09/26] ARM: SAMSUNG: cleanup mach/gpio-fns.h gpio-track.h and gpio-nrs.h Kukjin Kim
2013-01-10 10:53 ` Linus Walleij
2013-01-10 18:44 ` Kukjin Kim
2013-01-02 22:23 ` [PATCH 10/26] ARM: S3C24XX: make anubis-cpld, anubis-irq and anubis-map local Kukjin Kim
2013-01-02 22:23 ` [PATCH 11/26] ARM: S3C24XX: make bast-cpld.h, bast-irq.h and bast-map.h local Kukjin Kim
2013-01-02 22:23 ` [PATCH 12/26] ARM: S3C24XX: make gta02.h local Kukjin Kim
2013-01-02 22:23 ` [PATCH 13/26] ARM: S3C24XX: make h1940.h and h1940-latch.h local Kukjin Kim
2013-01-02 22:23 ` [PATCH 14/26] ARM: S3C24XX: make osiris-cpld.h and osiris-map.h local Kukjin Kim
2013-01-02 22:23 ` [PATCH 15/26] ARM: S3C24XX: make otom-map.h local Kukjin Kim
2013-01-02 22:23 ` [PATCH 16/26] ARM: S3C24XX: make vr1000-cpld.h, vr1000-irq.h and vr1000-map.h local Kukjin Kim
2013-01-02 22:23 ` [PATCH 17/26] ARM: S3C2416: remove regs-s3c2416-mem.h and regs-s3c2416.h Kukjin Kim
2013-01-02 22:23 ` [PATCH 18/26] ARM: S3C2412: cleanup regs-s3c2412.h Kukjin Kim
2013-01-02 22:23 ` [PATCH 19/26] ARM: S3C24XX: remove idle.h Kukjin Kim
2013-01-02 22:23 ` Kukjin Kim [this message]
2013-01-02 22:23 ` [PATCH 21/26] ARM: S3C64XX: make crag6410.h local Kukjin Kim
2013-01-02 22:23 ` [PATCH 22/26] ARM: S3C64XX: make regs-gpio-memport.h local Kukjin Kim
2013-01-02 22:24 ` [PATCH 23/26] ARM: S3C64XX: make regs-modem.h local Kukjin Kim
2013-01-02 22:24 ` [PATCH 24/26] ARM: S3C64XX: make regs-srom.h local Kukjin Kim
2013-01-02 22:24 ` [PATCH 25/26] ARM: S3C64XX: make regs-sys.h local Kukjin Kim
2013-01-02 22:24 ` [PATCH 26/26] ARM: S3C64XX: make regs-syscon-power.h local Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1357165443-3716-21-git-send-email-kgene.kim@samsung.com \
--to=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox