From: kgene.kim@samsung.com (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 25/26] ARM: S3C64XX: make regs-sys.h local
Date: Wed, 02 Jan 2013 14:24:02 -0800 [thread overview]
Message-ID: <1357165443-3716-26-git-send-email-kgene.kim@samsung.com> (raw)
In-Reply-To: <1357165443-3716-1-git-send-email-kgene.kim@samsung.com>
The header file can be local in mach-s3c64xx/.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-s3c64xx/clock.c | 3 ++-
arch/arm/mach-s3c64xx/cpuidle.c | 3 ++-
arch/arm/mach-s3c64xx/dma.c | 4 ++--
arch/arm/mach-s3c64xx/include/mach/regs-sys.h | 31 -------------------------
arch/arm/mach-s3c64xx/mach-crag6410.c | 2 +-
arch/arm/mach-s3c64xx/mach-smdk6410.c | 2 +-
arch/arm/mach-s3c64xx/pm.c | 2 +-
arch/arm/mach-s3c64xx/regs-sys.h | 30 ++++++++++++++++++++++++
arch/arm/mach-s3c64xx/setup-usb-phy.c | 3 ++-
9 files changed, 41 insertions(+), 39 deletions(-)
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/regs-sys.h
create mode 100644 arch/arm/mach-s3c64xx/regs-sys.h
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 803711e..8499415 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -23,7 +23,6 @@
#include <mach/hardware.h>
#include <mach/map.h>
-#include <mach/regs-sys.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
@@ -33,6 +32,8 @@
#include <plat/clock-clksrc.h>
#include <plat/pll.h>
+#include "regs-sys.h"
+
/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
* ext_xtal_mux for want of an actual name from the manual.
*/
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c
index acb197c..e3e455b 100644
--- a/arch/arm/mach-s3c64xx/cpuidle.c
+++ b/arch/arm/mach-s3c64xx/cpuidle.c
@@ -20,9 +20,10 @@
#include <mach/map.h>
-#include <mach/regs-sys.h>
#include <mach/regs-syscon-power.h>
+#include "regs-sys.h"
+
static int s3c64xx_enter_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index f2a7a17..ec29b35 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -28,10 +28,10 @@
#include <mach/map.h>
#include <mach/irqs.h>
-#include <mach/regs-sys.h>
-
#include <asm/hardware/pl080.h>
+#include "regs-sys.h"
+
/* dma channel state information */
struct s3c64xx_dmac {
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
deleted file mode 100644
index b91e020..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-sys.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX system register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_SYS_H
-#define __PLAT_REGS_SYS_H __FILE__
-
-#define S3C_SYSREG(x) (S3C_VA_SYS + (x))
-
-#define S3C64XX_AHB_CON0 S3C_SYSREG(0x100)
-#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104)
-#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108)
-
-#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110)
-
-#define S3C64XX_OTHERS S3C_SYSREG(0x900)
-
-#define S3C64XX_OTHERS_USBMASK (1 << 16)
-#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6)
-
-#endif /* _PLAT_REGS_SYS_H */
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index d254135..8b89e89 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -50,7 +50,6 @@
#include <mach/hardware.h>
#include <mach/map.h>
-#include <mach/regs-sys.h>
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
@@ -71,6 +70,7 @@
#include "crag6410.h"
#include "regs-gpio-memport.h"
#include "regs-modem.h"
+#include "regs-sys.h"
/* serial port setup */
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index dcf41bd..ddd0eb8 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -58,7 +58,6 @@
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-sys.h>
#include <linux/platform_data/ata-samsung_cf.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
@@ -75,6 +74,7 @@
#include "common.h"
#include "regs-modem.h"
#include "regs-srom.h"
+#include "regs-sys.h"
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index c6eff9f..546d6e0 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -26,13 +26,13 @@
#include <plat/pm.h>
#include <plat/wakeup-mask.h>
-#include <mach/regs-sys.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
#include <mach/regs-syscon-power.h>
#include "regs-gpio-memport.h"
#include "regs-modem.h"
+#include "regs-sys.h"
struct s3c64xx_pm_domain {
char *const name;
diff --git a/arch/arm/mach-s3c64xx/regs-sys.h b/arch/arm/mach-s3c64xx/regs-sys.h
new file mode 100644
index 0000000..8c411fb
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/regs-sys.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX system register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C64XX_REGS_SYS_H
+#define __MACH_S3C64XX_REGS_SYS_H __FILE__
+
+#define S3C_SYSREG(x) (S3C_VA_SYS + (x))
+
+#define S3C64XX_AHB_CON0 S3C_SYSREG(0x100)
+#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104)
+#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108)
+
+#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110)
+
+#define S3C64XX_OTHERS S3C_SYSREG(0x900)
+
+#define S3C64XX_OTHERS_USBMASK (1 << 16)
+#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6)
+
+#endif /* __MACH_S3C64XX_REGS_SYS_H */
diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c
index f6757e0..c8174d9 100644
--- a/arch/arm/mach-s3c64xx/setup-usb-phy.c
+++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c
@@ -15,11 +15,12 @@
#include <linux/io.h>
#include <linux/platform_device.h>
#include <mach/map.h>
-#include <mach/regs-sys.h>
#include <plat/cpu.h>
#include <plat/regs-usb-hsotg-phy.h>
#include <plat/usb-phy.h>
+#include "regs-sys.h"
+
static int s3c_usb_otgphy_init(struct platform_device *pdev)
{
struct clk *xusbxti;
--
1.7.10.4
next prev parent reply other threads:[~2013-01-02 22:24 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-02 22:23 [PATCH 00/26] ARM: SAMSUNG: cleanup header files Kukjin Kim
2013-01-02 22:23 ` [PATCH 01/26] gpio: samsung: remove inclusion <mach/regs-clock.h> Kukjin Kim
2013-01-10 10:52 ` Linus Walleij
2013-01-10 18:41 ` Kukjin Kim
2013-01-17 10:50 ` Linus Walleij
2013-01-02 22:23 ` [PATCH 02/26] cpufreq: exynos: cleanup exynos-cpufreq header Kukjin Kim
2013-01-02 22:23 ` [PATCH 03/26] ARM: S5P64X0: remove gpiolib.c file in mach-s5p64x0 Kukjin Kim
2013-01-02 22:23 ` [PATCH 04/26] ARM: S5P64X0: move i2c.h into local directory Kukjin Kim
2013-01-02 22:23 ` [PATCH 05/26] ARM: S5P64X0: move s5p64x0-clock.h " Kukjin Kim
2013-01-02 22:23 ` [PATCH 06/26] ARM: S5PV210: move regs-sys.h into setup-usb-phy.c file Kukjin Kim
2013-01-02 22:23 ` [PATCH 07/26] ARM: EXYNOS: move mach/pmu.h file into common.h Kukjin Kim
2013-01-02 22:23 ` [PATCH 08/26] ARM: SAMSUNG: cleanup mach/regs-audss.h file Kukjin Kim
2013-01-02 22:23 ` [PATCH 09/26] ARM: SAMSUNG: cleanup mach/gpio-fns.h gpio-track.h and gpio-nrs.h Kukjin Kim
2013-01-10 10:53 ` Linus Walleij
2013-01-10 18:44 ` Kukjin Kim
2013-01-02 22:23 ` [PATCH 10/26] ARM: S3C24XX: make anubis-cpld, anubis-irq and anubis-map local Kukjin Kim
2013-01-02 22:23 ` [PATCH 11/26] ARM: S3C24XX: make bast-cpld.h, bast-irq.h and bast-map.h local Kukjin Kim
2013-01-02 22:23 ` [PATCH 12/26] ARM: S3C24XX: make gta02.h local Kukjin Kim
2013-01-02 22:23 ` [PATCH 13/26] ARM: S3C24XX: make h1940.h and h1940-latch.h local Kukjin Kim
2013-01-02 22:23 ` [PATCH 14/26] ARM: S3C24XX: make osiris-cpld.h and osiris-map.h local Kukjin Kim
2013-01-02 22:23 ` [PATCH 15/26] ARM: S3C24XX: make otom-map.h local Kukjin Kim
2013-01-02 22:23 ` [PATCH 16/26] ARM: S3C24XX: make vr1000-cpld.h, vr1000-irq.h and vr1000-map.h local Kukjin Kim
2013-01-02 22:23 ` [PATCH 17/26] ARM: S3C2416: remove regs-s3c2416-mem.h and regs-s3c2416.h Kukjin Kim
2013-01-02 22:23 ` [PATCH 18/26] ARM: S3C2412: cleanup regs-s3c2412.h Kukjin Kim
2013-01-02 22:23 ` [PATCH 19/26] ARM: S3C24XX: remove idle.h Kukjin Kim
2013-01-02 22:23 ` [PATCH 20/26] ARM: S3C24XX: remove dsc.c and make regs-dsc.h local Kukjin Kim
2013-01-02 22:23 ` [PATCH 21/26] ARM: S3C64XX: make crag6410.h local Kukjin Kim
2013-01-02 22:23 ` [PATCH 22/26] ARM: S3C64XX: make regs-gpio-memport.h local Kukjin Kim
2013-01-02 22:24 ` [PATCH 23/26] ARM: S3C64XX: make regs-modem.h local Kukjin Kim
2013-01-02 22:24 ` [PATCH 24/26] ARM: S3C64XX: make regs-srom.h local Kukjin Kim
2013-01-02 22:24 ` Kukjin Kim [this message]
2013-01-02 22:24 ` [PATCH 26/26] ARM: S3C64XX: make regs-syscon-power.h local Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1357165443-3716-26-git-send-email-kgene.kim@samsung.com \
--to=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox