[GIT PULL] ARM: mvebu fixes for v3.8-rc6

[GIT PULL] ARM: mvebu fixes for v3.8-rc6

[Jason Cooper]

The following changes since commit 09d75bc7d217bd8868899028a98b53423e6b3324:

  ARM: kirkwood: fix missing #interrupt-cells property (2013-01-23 01:10:48 +0000)

are available in the git repository at:

  git://git.infradead.org/users/jcooper/linux.git tags/mvebu_fixes_for_v3.8-rc6

for you to fetch changes up to de27686b77f1c5c5dddf06d48fd322c52f098d51:

  arm: mvebu: i2c come back in defconfig (2013-01-23 15:05:11 +0000)

----------------------------------------------------------------
fixes for v3.8-rc6

 - add missing gpio interrupt lines to dove dt
 - fix bad logic for printing MPP error message on orion boards
 - build proper serial port driver after changing mvebu DT compatible property
   - This is a change to mvebu_defconfig that I wouldn't usually push out as a
     fix.  However, the commit

     b24212f arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driver

     changed the serial driver for the board in the dts file.  without the patch
     I've included in this pull, users won't see any log messages.

----------------------------------------------------------------
Gerlando Falauto (1):
      arm: plat-orion: fix printing of "MPP config unavailable on this hardware"

Gregory CLEMENT (1):
      arm: mvebu: i2c come back in defconfig

Jean-Francois Moine (1):
      Dove: activate GPIO interrupts in DT

 arch/arm/boot/dts/dove.dtsi      | 2 ++
 arch/arm/configs/mvebu_defconfig | 2 ++
 arch/arm/plat-orion/mpp.c        | 2 +-
 3 files changed, 5 insertions(+), 1 deletion(-)

[GIT PULL] ARM: mvebu fixes for v3.8-rc6

[Olof Johansson]

On Tue, Jan 29, 2013 at 03:18:28PM +0000, Jason Cooper wrote:
> The following changes since commit 09d75bc7d217bd8868899028a98b53423e6b3324:
> 
>   ARM: kirkwood: fix missing #interrupt-cells property (2013-01-23 01:10:48 +0000)
> 
> are available in the git repository at:
> 
>   git://git.infradead.org/users/jcooper/linux.git tags/mvebu_fixes_for_v3.8-rc6

Pulled, but:

> 
> for you to fetch changes up to de27686b77f1c5c5dddf06d48fd322c52f098d51:
> 
>   arm: mvebu: i2c come back in defconfig (2013-01-23 15:05:11 +0000)
> 
> ----------------------------------------------------------------
> fixes for v3.8-rc6
> 
>  - add missing gpio interrupt lines to dove dt
>  - fix bad logic for printing MPP error message on orion boards
>  - build proper serial port driver after changing mvebu DT compatible property
>    - This is a change to mvebu_defconfig that I wouldn't usually push out as a
>      fix.  However, the commit
> 
>      b24212f arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driver
> 
>      changed the serial driver for the board in the dts file.  without the patch
>      I've included in this pull, users won't see any log messages.
> 
> ----------------------------------------------------------------
> Gerlando Falauto (1):
>       arm: plat-orion: fix printing of "MPP config unavailable on this hardware"
> 
> Gregory CLEMENT (1):
>       arm: mvebu: i2c come back in defconfig
> 
> Jean-Francois Moine (1):
>       Dove: activate GPIO interrupts in DT

Please keep an eye on the patch subjects you apply. We're trying to standardize
on "ARM: dove: <...>", etc.


-Olof