From: padma.v@samsung.com (Padmavathi Venna)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: SAMSUNG: dma: Remove unnecessary code
Date: Mon, 04 Feb 2013 14:17:55 +0530 [thread overview]
Message-ID: <1359967675-624-1-git-send-email-padma.v@samsung.com> (raw)
This patch removes the usage of DMACH_DT_PROP and dt_dmach_prop
from dma code as the new generic dma dt binding support has been
added.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
---
The functionality of this patch is dependent on following patches in the link.
http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg15402.html
This patch is made based on Mark Brown next branch.
arch/arm/mach-s3c24xx/include/mach/dma.h | 1 -
arch/arm/mach-s3c64xx/include/mach/dma.h | 1 -
arch/arm/plat-samsung/dma-ops.c | 10 +---------
arch/arm/plat-samsung/include/plat/dma-ops.h | 1 -
arch/arm/plat-samsung/include/plat/dma-pl330.h | 1 -
5 files changed, 1 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
index 6b72d5a..b55da1d 100644
--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -24,7 +24,6 @@
*/
enum dma_ch {
- DMACH_DT_PROP = -1, /* not yet supported, do not use */
DMACH_XD0 = 0,
DMACH_XD1,
DMACH_SDI,
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index 57b1ff4..fe1a98c 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -21,7 +21,6 @@
*/
enum dma_ch {
/* DMA0/SDMA0 */
- DMACH_DT_PROP = -1, /* not yet supported, do not use */
DMACH_UART0 = 0,
DMACH_UART0_SRC2,
DMACH_UART1,
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
index 71d58dd..ec0d731 100644
--- a/arch/arm/plat-samsung/dma-ops.c
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -23,23 +23,15 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
struct device *dev, char *ch_name)
{
dma_cap_mask_t mask;
- void *filter_param;
dma_cap_zero(mask);
dma_cap_set(param->cap, mask);
- /*
- * If a dma channel property of a device node from device tree is
- * specified, use that as the fliter parameter.
- */
- filter_param = (dma_ch == DMACH_DT_PROP) ?
- (void *)param->dt_dmach_prop : (void *)dma_ch;
-
if (dev->of_node)
return (unsigned)dma_request_slave_channel(dev, ch_name);
else
return (unsigned)dma_request_channel(mask, pl330_filter,
- filter_param);
+ (void *)dma_ch);
}
static int samsung_dmadev_release(unsigned ch, void *param)
diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h
index 1141782..ce6d763 100644
--- a/arch/arm/plat-samsung/include/plat/dma-ops.h
+++ b/arch/arm/plat-samsung/include/plat/dma-ops.h
@@ -18,7 +18,6 @@
struct samsung_dma_req {
enum dma_transaction_type cap;
- struct property *dt_dmach_prop;
struct s3c2410_dma_client *client;
};
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
index d384a80..abe07fa 100644
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -21,7 +21,6 @@
* use these just as IDs.
*/
enum dma_ch {
- DMACH_DT_PROP = -1,
DMACH_UART0_RX = 0,
DMACH_UART0_TX,
DMACH_UART1_RX,
--
1.7.4.4
next reply other threads:[~2013-02-04 8:47 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-04 8:47 Padmavathi Venna [this message]
2013-02-04 17:43 ` [PATCH] ARM: SAMSUNG: dma: Remove unnecessary code Arnd Bergmann
2013-02-05 8:04 ` Padma Venkat
2013-02-05 11:13 ` Arnd Bergmann
2013-02-05 15:54 ` Padma Venkat
2013-02-05 23:51 ` Arnd Bergmann
-- strict thread matches above, loose matches on Subject: below --
2013-02-14 3:47 Padmavathi Venna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359967675-624-1-git-send-email-padma.v@samsung.com \
--to=padma.v@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox