* [PATCH 1/3] Convert selectors of GENERIC_GPIO to GPIOLIB
2013-03-29 13:11 [PATCH 0/3] gpio: remove GENERIC_GPIO completely Alexandre Courbot
@ 2013-03-29 13:11 ` Alexandre Courbot
2013-03-29 13:11 ` [PATCH 2/3] Remove GENERIC_GPIO config option Alexandre Courbot
` (3 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Alexandre Courbot @ 2013-03-29 13:11 UTC (permalink / raw)
To: linux-arm-kernel
GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on
GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
arch/unicore32/Kconfig | 2 +-
drivers/extcon/Kconfig | 2 +-
drivers/i2c/busses/Kconfig | 4 ++--
drivers/i2c/muxes/Kconfig | 2 +-
drivers/input/keyboard/Kconfig | 6 +++---
drivers/input/misc/Kconfig | 8 ++++----
drivers/input/mouse/Kconfig | 2 +-
drivers/leds/Kconfig | 6 +++---
drivers/mtd/maps/Kconfig | 2 +-
drivers/mtd/nand/Kconfig | 2 +-
drivers/net/phy/Kconfig | 2 +-
drivers/pinctrl/sh-pfc/Kconfig | 26 +++++++++++++-------------
drivers/regulator/Kconfig | 2 +-
drivers/spi/Kconfig | 8 ++++----
drivers/staging/android/Kconfig | 2 +-
drivers/staging/iio/accel/Kconfig | 2 +-
drivers/staging/iio/adc/Kconfig | 2 +-
drivers/staging/iio/addac/Kconfig | 2 +-
drivers/staging/iio/resolver/Kconfig | 4 ++--
drivers/staging/iio/trigger/Kconfig | 2 +-
drivers/usb/otg/Kconfig | 2 +-
drivers/video/Kconfig | 2 +-
drivers/video/backlight/Kconfig | 4 ++--
drivers/w1/masters/Kconfig | 2 +-
include/linux/gpio.h | 6 +++---
25 files changed, 52 insertions(+), 52 deletions(-)
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 63521dc..468cd70 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -156,7 +156,7 @@ source "mm/Kconfig"
config LEDS
def_bool y
- depends on GENERIC_GPIO
+ depends on GPIOLIB
config ALIGNMENT_TRAP
def_bool y
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index 5168a13..3297301 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -16,7 +16,7 @@ comment "Extcon Device Drivers"
config EXTCON_GPIO
tristate "GPIO extcon support"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say Y here to enable GPIO based extcon support. Note that GPIO
extcon supports single state per extcon instance.
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index adfee98..631736e 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -363,7 +363,7 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
config I2C_CBUS_GPIO
tristate "CBUS I2C driver"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Support for CBUS access using I2C API. Mostly relevant for Nokia
Internet Tablets (770, N800 and N810).
@@ -436,7 +436,7 @@ config I2C_EG20T
config I2C_GPIO
tristate "GPIO-based bitbanging I2C"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select I2C_ALGOBIT
help
This is a very simple bitbanging I2C driver utilizing the
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index 0be5b83..40062ed 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -7,7 +7,7 @@ menu "Multiplexer I2C Chip support"
config I2C_MUX_GPIO
tristate "GPIO-based I2C multiplexer"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
If you say yes to this option, support will be included for a
GPIO based I2C multiplexer. This driver provides access to
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index ac05006..772666f 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -175,7 +175,7 @@ config KEYBOARD_EP93XX
config KEYBOARD_GPIO
tristate "GPIO Buttons"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
This driver implements support for buttons connected
to GPIO pins of various CPUs (and some other chips).
@@ -190,7 +190,7 @@ config KEYBOARD_GPIO
config KEYBOARD_GPIO_POLLED
tristate "Polled GPIO buttons"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select INPUT_POLLDEV
help
This driver implements support for buttons connected
@@ -241,7 +241,7 @@ config KEYBOARD_TCA8418
config KEYBOARD_MATRIX
tristate "GPIO driven matrix keypad support"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select INPUT_MATRIXKMAP
help
Enable support for GPIO driven matrix keypad.
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 259ef31..262cda2 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -214,7 +214,7 @@ config INPUT_APANEL
config INPUT_GP2A
tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
depends on I2C
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
hooked to an I2C bus.
@@ -224,7 +224,7 @@ config INPUT_GP2A
config INPUT_GPIO_TILT_POLLED
tristate "Polled GPIO tilt switch"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select INPUT_POLLDEV
help
This driver implements support for tilt switches connected
@@ -472,7 +472,7 @@ config INPUT_PWM_BEEPER
config INPUT_GPIO_ROTARY_ENCODER
tristate "Rotary encoders connected to GPIO pins"
- depends on GPIOLIB && GENERIC_GPIO
+ depends on GPIOLIB
help
Say Y here to add support for rotary encoders connected to GPIO lines.
Check file:Documentation/input/rotary-encoder.txt for more
@@ -484,7 +484,7 @@ config INPUT_GPIO_ROTARY_ENCODER
config INPUT_RB532_BUTTON
tristate "Mikrotik Routerboard 532 button interface"
depends on MIKROTIK_RB532
- depends on GPIOLIB && GENERIC_GPIO
+ depends on GPIOLIB
select INPUT_POLLDEV
help
Say Y here if you want support for the S1 button built into
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 802bd6a..effa9c5 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -295,7 +295,7 @@ config MOUSE_VSXXXAA
config MOUSE_GPIO
tristate "GPIO mouse"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select INPUT_POLLDEV
help
This driver simulates a mouse on GPIO lines of various CPUs (and some
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index ec50824..2a53177 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -173,7 +173,7 @@ config LEDS_PCA9532_GPIO
config LEDS_GPIO
tristate "LED Support for GPIO connected LEDs"
depends on LEDS_CLASS
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
This option enables support for the LEDs connected to GPIO
outputs. To be useful the particular board must have LEDs
@@ -352,7 +352,7 @@ config LEDS_INTEL_SS4200
config LEDS_LT3593
tristate "LED driver for LT3593 controllers"
depends on LEDS_CLASS
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
This option enables support for LEDs driven by a Linear Technology
LT3593 controller. This controller uses a special one-wire pulse
@@ -421,7 +421,7 @@ config LEDS_ASIC3
config LEDS_RENESAS_TPU
bool "LED support for Renesas TPU"
- depends on LEDS_CLASS=y && HAVE_CLK && GENERIC_GPIO
+ depends on LEDS_CLASS=y && HAVE_CLK && GPIOLIB
help
This option enables build of the LED TPU platform driver,
suitable to drive any TPU channel on newer Renesas SoCs.
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 3ed17c4..c269383 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -419,7 +419,7 @@ config MTD_BFIN_ASYNC
config MTD_GPIO_ADDR
tristate "GPIO-assisted Flash Chip Support"
- depends on GENERIC_GPIO || GPIOLIB
+ depends on GPIOLIB
depends on MTD_COMPLEX_MAPPINGS
help
Map driver which allows flashes to be partially physically addressed
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 81bf5e5..5d54ad3 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -89,7 +89,7 @@ config MTD_NAND_H1900
config MTD_NAND_GPIO
tristate "GPIO NAND Flash driver"
- depends on GENERIC_GPIO && ARM
+ depends on GPIOLIB && ARM
help
This enables a GPIO based NAND flash driver.
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 4503452..1e11f2b 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -126,7 +126,7 @@ config MDIO_BITBANG
config MDIO_GPIO
tristate "Support for GPIO lib-based bitbanged MDIO buses"
- depends on MDIO_BITBANG && GENERIC_GPIO
+ depends on MDIO_BITBANG && GPIOLIB
---help---
Supports GPIO lib-based MDIO busses.
diff --git a/drivers/pinctrl/sh-pfc/Kconfig b/drivers/pinctrl/sh-pfc/Kconfig
index c3340f5..99ba8e4 100644
--- a/drivers/pinctrl/sh-pfc/Kconfig
+++ b/drivers/pinctrl/sh-pfc/Kconfig
@@ -6,7 +6,7 @@ if ARCH_SHMOBILE || SUPERH
config PINCTRL_SH_PFC
# XXX move off the gpio dependency
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select GPIO_SH_PFC if ARCH_REQUIRE_GPIOLIB
select PINMUX
select PINCONF
@@ -34,19 +34,19 @@ config PINCTRL_PFC_R8A7779
config PINCTRL_PFC_SH7203
def_bool y
depends on CPU_SUBTYPE_SH7203
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7264
def_bool y
depends on CPU_SUBTYPE_SH7264
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7269
def_bool y
depends on CPU_SUBTYPE_SH7269
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7372
@@ -62,55 +62,55 @@ config PINCTRL_PFC_SH73A0
config PINCTRL_PFC_SH7720
def_bool y
depends on CPU_SUBTYPE_SH7720
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7722
def_bool y
depends on CPU_SUBTYPE_SH7722
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7723
def_bool y
depends on CPU_SUBTYPE_SH7723
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7724
def_bool y
depends on CPU_SUBTYPE_SH7724
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7734
def_bool y
depends on CPU_SUBTYPE_SH7734
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7757
def_bool y
depends on CPU_SUBTYPE_SH7757
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7785
def_bool y
depends on CPU_SUBTYPE_SH7785
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SH7786
def_bool y
depends on CPU_SUBTYPE_SH7786
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
config PINCTRL_PFC_SHX3
def_bool y
depends on CPU_SUBTYPE_SHX3
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select PINCTRL_SH_PFC
endif
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index a5d97ea..8bb2644 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -66,7 +66,7 @@ config REGULATOR_USERSPACE_CONSUMER
config REGULATOR_GPIO
tristate "GPIO regulator support"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
This driver provides support for regulators that can be
controlled via gpios.
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index f80eee7..134b6f3 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -61,7 +61,7 @@ config SPI_ALTERA
config SPI_ATH79
tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
- depends on ATH79 && GENERIC_GPIO
+ depends on ATH79 && GPIOLIB
select SPI_BITBANG
help
This enables support for the SPI controller present on the
@@ -163,7 +163,7 @@ config SPI_FALCON
config SPI_GPIO
tristate "GPIO-based bitbanging SPI Master"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select SPI_BITBANG
help
This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
@@ -240,7 +240,7 @@ config SPI_FSL_ESPI
config SPI_OC_TINY
tristate "OpenCores tiny SPI"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select SPI_BITBANG
help
This is the driver for OpenCores tiny SPI master controller.
@@ -430,7 +430,7 @@ config SPI_TOPCLIFF_PCH
config SPI_TXX9
tristate "Toshiba TXx9 SPI controller"
- depends on GENERIC_GPIO && CPU_TX49XX
+ depends on GPIOLIB && CPU_TX49XX
help
SPI driver for Toshiba TXx9 MIPS SoCs
diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig
index 465a28c..9feb6ff 100644
--- a/drivers/staging/android/Kconfig
+++ b/drivers/staging/android/Kconfig
@@ -54,7 +54,7 @@ config ANDROID_TIMED_OUTPUT
config ANDROID_TIMED_GPIO
tristate "Android timed gpio driver"
- depends on GENERIC_GPIO && ANDROID_TIMED_OUTPUT
+ depends on GPIOLIB && ANDROID_TIMED_OUTPUT
default n
config ANDROID_LOW_MEMORY_KILLER
diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig
index e2e786d..ad45dfb 100644
--- a/drivers/staging/iio/accel/Kconfig
+++ b/drivers/staging/iio/accel/Kconfig
@@ -61,7 +61,7 @@ config LIS3L02DQ
depends on SPI
select IIO_TRIGGER if IIO_BUFFER
depends on !IIO_BUFFER || IIO_KFIFO_BUF
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say yes here to build SPI support for the ST microelectronics
accelerometer. The driver supplies direct access via sysfs files
diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index 7b2a01d..a48eee1 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -73,7 +73,7 @@ config AD7780
config AD7816
tristate "Analog Devices AD7816/7/8 temperature sensor and ADC driver"
depends on SPI
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say yes here to build support for Analog Devices AD7816/7/8
temperature sensors and ADC.
diff --git a/drivers/staging/iio/addac/Kconfig b/drivers/staging/iio/addac/Kconfig
index 698a897..e6795e0 100644
--- a/drivers/staging/iio/addac/Kconfig
+++ b/drivers/staging/iio/addac/Kconfig
@@ -5,7 +5,7 @@ menu "Analog digital bi-direction converters"
config ADT7316
tristate "Analog Devices ADT7316/7/8 ADT7516/7/9 temperature sensor, ADC and DAC driver"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say yes here to build support for Analog Devices ADT7316, ADT7317, ADT7318
and ADT7516, ADT7517, ADT7519 temperature sensors, ADC and DAC.
diff --git a/drivers/staging/iio/resolver/Kconfig b/drivers/staging/iio/resolver/Kconfig
index 49f69ef..ce360f1 100644
--- a/drivers/staging/iio/resolver/Kconfig
+++ b/drivers/staging/iio/resolver/Kconfig
@@ -13,7 +13,7 @@ config AD2S90
config AD2S1200
tristate "Analog Devices ad2s1200/ad2s1205 driver"
depends on SPI
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say yes here to build support for Analog Devices spi resolver
to digital converters, ad2s1200 and ad2s1205, provides direct access
@@ -22,7 +22,7 @@ config AD2S1200
config AD2S1210
tristate "Analog Devices ad2s1210 driver"
depends on SPI
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say yes here to build support for Analog Devices spi resolver
to digital converters, ad2s1210, provides direct access via sysfs.
diff --git a/drivers/staging/iio/trigger/Kconfig b/drivers/staging/iio/trigger/Kconfig
index d44d3ad..1a051da 100644
--- a/drivers/staging/iio/trigger/Kconfig
+++ b/drivers/staging/iio/trigger/Kconfig
@@ -14,7 +14,7 @@ config IIO_PERIODIC_RTC_TRIGGER
config IIO_GPIO_TRIGGER
tristate "GPIO trigger"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Provides support for using GPIO pins as IIO triggers.
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 37962c9..8377868 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -19,7 +19,7 @@ if USB || USB_GADGET
#
config USB_GPIO_VBUS
tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select USB_OTG_UTILS
help
Provides simple GPIO VBUS sensing for controllers with an
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 4c1546f..df9c738 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2481,7 +2481,7 @@ config FB_SSD1307
tristate "Solomon SSD1307 framebuffer support"
depends on FB && I2C
depends on OF
- depends on GENERIC_GPIO
+ depends on GPIOLIB
select FB_SYS_FOPS
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index db10d01..b83d155 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -36,14 +36,14 @@ config LCD_CORGI
config LCD_L4F00242T03
tristate "Epson L4F00242T03 LCD"
- depends on SPI_MASTER && GENERIC_GPIO
+ depends on SPI_MASTER && GPIOLIB
help
SPI driver for Epson L4F00242T03. This provides basic support
for init and powering the LCD up/down through a sysfs interface.
config LCD_LMS283GF05
tristate "Samsung LMS283GF05 LCD"
- depends on SPI_MASTER && GENERIC_GPIO
+ depends on SPI_MASTER && GPIOLIB
help
SPI driver for Samsung LMS283GF05. This provides basic support
for powering the LCD up/down through a sysfs interface.
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index e8ca63a..2bd1257 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -50,7 +50,7 @@ config W1_MASTER_DS1WM
config W1_MASTER_GPIO
tristate "GPIO 1-wire busmaster"
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say Y here if you want to communicate with your 1-wire devices using
GPIO pins. This driver uses the GPIO API to control the wire.
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index f6c7ae3..552e3f4 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -39,7 +39,7 @@ struct gpio {
const char *label;
};
-#ifdef CONFIG_GENERIC_GPIO
+#ifdef CONFIG_GPIOLIB
#ifdef CONFIG_ARCH_HAVE_CUSTOM_GPIO_H
#include <asm/gpio.h>
@@ -74,7 +74,7 @@ static inline int irq_to_gpio(unsigned int irq)
#endif /* ! CONFIG_ARCH_HAVE_CUSTOM_GPIO_H */
-#else /* ! CONFIG_GENERIC_GPIO */
+#else /* ! CONFIG_GPIOLIB */
#include <linux/kernel.h>
#include <linux/types.h>
@@ -226,7 +226,7 @@ gpiochip_remove_pin_ranges(struct gpio_chip *chip)
WARN_ON(1);
}
-#endif /* ! CONFIG_GENERIC_GPIO */
+#endif /* ! CONFIG_GPIOLIB */
struct device;
--
1.8.2
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 2/3] Remove GENERIC_GPIO config option
2013-03-29 13:11 [PATCH 0/3] gpio: remove GENERIC_GPIO completely Alexandre Courbot
2013-03-29 13:11 ` [PATCH 1/3] Convert selectors of GENERIC_GPIO to GPIOLIB Alexandre Courbot
@ 2013-03-29 13:11 ` Alexandre Courbot
2013-03-29 15:24 ` [PATCH 0/3] gpio: remove GENERIC_GPIO completely Alex Courbot
` (2 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Alexandre Courbot @ 2013-03-29 13:11 UTC (permalink / raw)
To: linux-arm-kernel
GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code
and all driver code has been switch to depend on GPIOLIB. It is thus
safe to have GENERIC_GPIO removed.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
Documentation/gpio.txt | 10 +++++-----
arch/alpha/Kconfig | 3 ---
arch/arm/Kconfig | 3 ---
arch/arm/plat-orion/gpio.c | 2 +-
arch/arm64/Kconfig | 3 ---
arch/avr32/Kconfig | 3 ---
arch/blackfin/Kconfig | 3 ---
arch/hexagon/Kconfig | 3 ---
arch/ia64/Kconfig | 3 ---
arch/m68k/Kconfig | 3 ---
arch/metag/Kconfig | 3 ---
arch/microblaze/Kconfig | 3 ---
arch/mips/Kconfig | 3 ---
arch/openrisc/Kconfig | 3 ---
arch/powerpc/Kconfig | 5 -----
arch/sh/Kconfig | 3 ---
arch/sparc/Kconfig | 5 -----
arch/unicore32/Kconfig | 3 ---
arch/x86/Kconfig | 3 ---
arch/xtensa/Kconfig | 3 ---
drivers/gpio/Kconfig | 1 -
drivers/gpio/gpio-lpc32xx.c | 2 +-
22 files changed, 7 insertions(+), 66 deletions(-)
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index 77a1d11..6f83fa9 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -72,11 +72,11 @@ in this document, but drivers acting as clients to the GPIO interface must
not care how it's implemented.)
That said, if the convention is supported on their platform, drivers should
-use it when possible. Platforms must declare GENERIC_GPIO support in their
-Kconfig (boolean true), and provide an <asm/gpio.h> file. Drivers that can't
-work without standard GPIO calls should have Kconfig entries which depend
-on GENERIC_GPIO. The GPIO calls are available, either as "real code" or as
-optimized-away stubs, when drivers use the include file:
+use it when possible. Platforms must select ARCH_REQUIRE_GPIOLIB or
+ARCH_WANT_OPTIONAL_GPIOLIB in their Kconfig. Drivers that can't work without
+standard GPIO calls should have Kconfig entries which depend on GPIOLIB. The
+GPIO calls are available, either as "real code" or as optimized-away stubs,
+when drivers use the include file:
#include <linux/gpio.h>
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 8a33ba0..282ff37 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -56,9 +56,6 @@ config GENERIC_CALIBRATE_DELAY
bool
default y
-config GENERIC_GPIO
- bool
-
config ZONE_DMA
bool
default y
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 13b7394..ceac9a4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -107,9 +107,6 @@ config MIGHT_HAVE_PCI
config SYS_SUPPORTS_APM_EMULATION
bool
-config GENERIC_GPIO
- bool
-
config HAVE_TCM
bool
select GENERIC_ALLOCATOR
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index c29ee7e..59ddf4d 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -150,7 +150,7 @@ err_out:
}
/*
- * GENERIC_GPIO primitives.
+ * GPIO primitives.
*/
static int orion_gpio_request(struct gpio_chip *chip, unsigned pin)
{
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 9b6d19f..e6e7007 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -92,9 +92,6 @@ config SWIOTLB
config IOMMU_HELPER
def_bool SWIOTLB
-config GENERIC_GPIO
- bool
-
source "init/Kconfig"
source "kernel/Kconfig.freezer"
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index d22c6b4..ff775b8 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -26,9 +26,6 @@ config AVR32
There is an AVR32 Linux project with a web page at
http://avr32linux.org/.
-config GENERIC_GPIO
- def_bool n
-
config STACKTRACE_SUPPORT
def_bool y
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 20e203a..71dd50b 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -55,9 +55,6 @@ config GENERIC_BUG
config ZONE_DMA
def_bool y
-config GENERIC_GPIO
- def_bool n
-
config FORCE_MAX_ZONEORDER
int
default "14"
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index e4decc6..21d6ba9 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -170,9 +170,6 @@ source "mm/Kconfig"
source "kernel/Kconfig.hz"
-config GENERIC_GPIO
- def_bool n
-
endmenu
source "init/Kconfig"
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 9a02f71..38ef339 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -101,9 +101,6 @@ config GENERIC_CALIBRATE_DELAY
config HAVE_SETUP_PER_CPU_AREA
def_bool y
-config GENERIC_GPIO
- bool
-
config DMI
bool
default y
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 6de8133..821170e 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -35,9 +35,6 @@ config ARCH_HAS_ILOG2_U32
config ARCH_HAS_ILOG2_U64
bool
-config GENERIC_GPIO
- bool
-
config GENERIC_HWEIGHT
bool
default y
diff --git a/arch/metag/Kconfig b/arch/metag/Kconfig
index afc8973..0e97f5c5 100644
--- a/arch/metag/Kconfig
+++ b/arch/metag/Kconfig
@@ -54,9 +54,6 @@ config GENERIC_HWEIGHT
config GENERIC_CALIBRATE_DELAY
def_bool y
-config GENERIC_GPIO
- def_bool n
-
config NO_IOPORT
def_bool y
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 1323fa2..4fb682a 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -56,9 +56,6 @@ config GENERIC_HWEIGHT
config GENERIC_CALIBRATE_DELAY
def_bool y
-config GENERIC_GPIO
- bool
-
config GENERIC_CSUM
def_bool y
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index ff0e563..5393981 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1004,9 +1004,6 @@ config GENERIC_ISA_DMA_SUPPORT_BROKEN
config ISA_DMA_API
bool
-config GENERIC_GPIO
- bool
-
config HOLES_IN_ZONE
bool
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index e324402..6c404ee 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -44,9 +44,6 @@ config GENERIC_HWEIGHT
config NO_IOPORT
def_bool y
-config GENERIC_GPIO
- def_bool n
-
config TRACE_IRQFLAGS_SUPPORT
def_bool y
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index ea5bb04..9c5bc68 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -82,11 +82,6 @@ config GENERIC_HWEIGHT
bool
default y
-config GENERIC_GPIO
- bool
- help
- Generic GPIO API support
-
config PPC
bool
default y
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 5e85963..f9391a6 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -92,9 +92,6 @@ config GENERIC_CSUM
config GENERIC_HWEIGHT
def_bool y
-config GENERIC_GPIO
- def_bool n
-
config GENERIC_CALIBRATE_DELAY
bool
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 3d361f2..90b3a0f 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -135,11 +135,6 @@ config GENERIC_ISA_DMA
bool
default y if SPARC32
-config GENERIC_GPIO
- bool
- help
- Generic GPIO API support
-
config ARCH_SUPPORTS_DEBUG_PAGEALLOC
def_bool y if SPARC64
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 468cd70..41bcc00 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -23,9 +23,6 @@ config UNICORE32
designs licensed by PKUnity Ltd.
Please see web page at <http://www.pkunity.com/>.
-config GENERIC_GPIO
- bool
-
config GENERIC_CSUM
def_bool y
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 70c0f3d..a6298c2 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -172,9 +172,6 @@ config GENERIC_BUG_RELATIVE_POINTERS
config GENERIC_HWEIGHT
def_bool y
-config GENERIC_GPIO
- bool
-
config ARCH_MAY_HAVE_PC_FDC
def_bool y
depends on ISA_DMA_API
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index b09de49..acdfc61 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -33,9 +33,6 @@ config RWSEM_XCHGADD_ALGORITHM
config GENERIC_HWEIGHT
def_bool y
-config GENERIC_GPIO
- bool
-
config ARCH_HAS_ILOG2_U32
def_bool n
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 93aaadf..5d53aba 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -38,7 +38,6 @@ config GPIO_DEVRES
menuconfig GPIOLIB
bool "GPIO Support"
depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
- select GENERIC_GPIO
help
This enables GPIO support through the generic GPIO library.
You only need to enable this, if you also want to enable
diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c
index 36d7dee..4ad9c6b 100644
--- a/drivers/gpio/gpio-lpc32xx.c
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -255,7 +255,7 @@ static int __get_gpo_state_p3(struct lpc32xx_gpio_chip *group,
}
/*
- * GENERIC_GPIO primitives.
+ * GPIO primitives.
*/
static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip,
unsigned pin)
--
1.8.2
^ permalink raw reply related [flat|nested] 7+ messages in thread