From: chunfeng.yun@mediatek.com (Chunfeng Yun)
To: linux-arm-kernel@lists.infradead.org
Subject: Mediatek xHCI support
Date: Fri, 31 Jul 2015 21:03:51 +0800 [thread overview]
Message-ID: <1438347836-29060-1-git-send-email-chunfeng.yun@mediatek.com> (raw)
>From 8babf12102cda26752771c1aebd0aff38514847f Mon Sep 17 00:00:00 2001
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
Date: Fri, 31 Jul 2015 20:44:17 +0800
Subject: [PATCH v4 0/5] Mediatek xHCI support
The patch supports MediaTek's xHCI controller.
There are some differences from xHCI spec:
1. The interval is specified in 250 * 8ns increments for Interrupt Moderation
Interval(IMODI) of the Interrupter Moderation(IMOD) register, it is 8 times as
much as that defined in xHCI spec.
2. For the value of TD Size in Normal TRB, MTK's xHCI controller defines a
number of packets that remain to be transferred for a TD after processing all
Max packets in all previous TRBs,that means don't include the current TRB's,
but in xHCI spec it includes the current ones.
3. To minimize the scheduling effort for synchronous endpoints in xHC, the MTK
architecture defines some extra SW scheduling parameters for HW. According to
these parameters provided by SW, the xHC can easily decide whether a
synchronous endpoint should be scheduled in a specific uFrame. The extra SW
scheduling parameters are put into reserved DWs in Slot and Endpoint Context.
And a bandwidth scheduler algorithm is added to support such feature.
A usb3.0 phy driver is also added which used by mt65xx SoCs platform, it
supports two usb2.0 ports and one usb3.0 port.
Change in v4:
1. descripte more exactly for each specifiers in binding file
2. use BIT() to define a bit mask mcro
Chunfeng Yun (5):
dt-bindings: Add usb3.0 phy binding for MT65xx SoCs
dt-bindings: Add a binding for Mediatek xHCI host controller
usb: phy: add usb3.0 phy driver for mt65xx SoCs
xhci: mediatek: support MTK xHCI host controller
arm64: dts: mediatek: add xHCI & usb phy for mt8173
.../devicetree/bindings/phy/phy-mt65xx-usb.txt | 21 +
.../devicetree/bindings/usb/mt8173-xhci.txt | 51 ++
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 17 +
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 29 +
drivers/phy/Kconfig | 9 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-mt65xx-usb3.c | 419 +++++++++++
drivers/usb/host/Kconfig | 9 +
drivers/usb/host/Makefile | 4 +
drivers/usb/host/xhci-mtk-sch.c | 436 +++++++++++
drivers/usb/host/xhci-mtk.c | 836 +++++++++++++++++++++
drivers/usb/host/xhci-mtk.h | 135 ++++
drivers/usb/host/xhci-ring.c | 35 +-
drivers/usb/host/xhci.c | 19 +-
drivers/usb/host/xhci.h | 1 +
15 files changed, 2015 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
create mode 100644 Documentation/devicetree/bindings/usb/mt8173-xhci.txt
create mode 100644 drivers/phy/phy-mt65xx-usb3.c
create mode 100644 drivers/usb/host/xhci-mtk-sch.c
create mode 100644 drivers/usb/host/xhci-mtk.c
create mode 100644 drivers/usb/host/xhci-mtk.h
--
1.8.1.1.dirty
next reply other threads:[~2015-07-31 13:03 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-31 13:03 Chunfeng Yun [this message]
2015-07-31 13:03 ` [PATCH v4 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs Chunfeng Yun
2015-07-31 13:03 ` [PATCH v4 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller Chunfeng Yun
2015-07-31 13:45 ` Mark Rutland
2015-08-07 11:17 ` chunfeng yun
2015-07-31 13:03 ` [PATCH v4 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs Chunfeng Yun
2015-07-31 13:03 ` [PATCH v4 4/5] xhci: mediatek: support MTK xHCI host controller Chunfeng Yun
2015-07-31 13:03 ` [PATCH v4 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173 Chunfeng Yun
-- strict thread matches above, loose matches on Subject: below --
2015-08-07 12:30 Mediatek xHCI support Chunfeng Yun
2015-08-22 1:45 Chunfeng Yun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438347836-29060-1-git-send-email-chunfeng.yun@mediatek.com \
--to=chunfeng.yun@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox