public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: chunfeng.yun@mediatek.com (Chunfeng Yun)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173
Date: Fri, 31 Jul 2015 21:03:56 +0800	[thread overview]
Message-ID: <1438347836-29060-6-git-send-email-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <1438347836-29060-1-git-send-email-chunfeng.yun@mediatek.com>

add xHCI and phy drivers for MT8173-EVB

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 17 +++++++++++++++++
 arch/arm64/boot/dts/mediatek/mt8173.dtsi    | 29 +++++++++++++++++++++++++++++
 2 files changed, 46 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index f433c21..f9bbabd 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -13,6 +13,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "mt8173.dtsi"
 
 / {
@@ -32,6 +33,15 @@
 	};
 
 	chosen { };
+
+	usb_p1_vbus: regulator at 0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &pwrap {
@@ -211,3 +221,10 @@
 &uart0 {
 	status = "okay";
 };
+
+&usb {
+	vusb33-supply = <&mt6397_vusb_reg>;
+	vbus-supply = <&usb_p1_vbus>;
+	mediatek,wakeup-src = <1>;
+	mediatek,u2port-num = <2>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 0696f8f..8fa9ae8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/clock/mt8173-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/mt8173-power.h>
 #include <dt-bindings/reset-controller/mt8173-resets.h>
 #include "mt8173-pinfunc.h"
 
@@ -393,6 +394,34 @@
 			#size-cells = <0>;
 			status = "disabled";
 		};
+
+		usb: usb at 11270000 {
+			compatible = "mediatek,mt8173-xhci";
+			reg = <0 0x11270000 0 0x4000>,
+			      <0 0x11280000 0 0x0800>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+			clocks = <&topckgen CLK_TOP_USB30_SEL>,
+				 <&pericfg CLK_PERI_USB0>,
+				 <&pericfg CLK_PERI_USB1>;
+			clock-names = "sys_mac",
+				      "wakeup_deb_p0",
+				      "wakeup_deb_p1";
+			phys = <&u3phy 0>, <&u3phy 1>;
+			phy-names = "usb-phy0", "usb-phy1";
+			usb3-lpm-capable;
+			mediatek,usb-wakeup = <&pericfg>;
+			status = "okay";
+		};
+
+		u3phy: usb-phy at 11290000 {
+			compatible = "mediatek,mt8173-u3phy";
+			reg = <0 0x11290000 0 0x3000>;
+			clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+			clock-names = "u3phya_ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
 	};
 };
 
-- 
1.8.1.1.dirty

      parent reply	other threads:[~2015-07-31 13:03 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-31 13:03 Mediatek xHCI support Chunfeng Yun
2015-07-31 13:03 ` [PATCH v4 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs Chunfeng Yun
2015-07-31 13:03 ` [PATCH v4 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller Chunfeng Yun
2015-07-31 13:45   ` Mark Rutland
2015-08-07 11:17     ` chunfeng yun
2015-07-31 13:03 ` [PATCH v4 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs Chunfeng Yun
2015-07-31 13:03 ` [PATCH v4 4/5] xhci: mediatek: support MTK xHCI host controller Chunfeng Yun
2015-07-31 13:03 ` Chunfeng Yun [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1438347836-29060-6-git-send-email-chunfeng.yun@mediatek.com \
    --to=chunfeng.yun@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox