* [PATCH v2 1/2] arm64: dts: move juno pcie-controller to base file @ 2016-01-25 15:14 Sudeep Holla 2016-01-25 15:14 ` [PATCH v2 2/2] arm64: dts: Add support for Juno r2 board Sudeep Holla 0 siblings, 1 reply; 3+ messages in thread From: Sudeep Holla @ 2016-01-25 15:14 UTC (permalink / raw) To: linux-arm-kernel The PCIe controller is found on all Juno SoC version. However it's not functional on R0 due to some hardware bug. In preparation to add Juno R2 support, this patch moves the pcie-controller defination to base DTS file. It's marked as disabled by default and is enabled for Juno R1 explicitly. Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> --- arch/arm64/boot/dts/arm/juno-base.dtsi | 22 ++++++++++++++++++++++ arch/arm64/boot/dts/arm/juno-r1.dts | 25 ++++--------------------- 2 files changed, 26 insertions(+), 21 deletions(-) v1->v2: - Moved pcie-controller to juno-base.dtsi diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index dd5158eb5872..b501721baf77 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -75,6 +75,28 @@ }; }; + pcie_ctlr: pcie-controller at 40000000 { + compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; + device_type = "pci"; + reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ + bus-range = <0 255>; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + dma-coherent; + ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>, + <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, + <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>, + <0 0 0 2 &gic 0 0 0 137 4>, + <0 0 0 3 &gic 0 0 0 138 4>, + <0 0 0 4 &gic 0 0 0 139 4>; + msi-parent = <&v2m_0>; + status = "disabled"; + }; + scpi { compatible = "arm,scpi"; mboxes = <&mailbox 1>; diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index 8826f834f54f..d95d9e7e2dc0 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -172,29 +172,12 @@ }; #include "juno-base.dtsi" - - pcie-controller at 40000000 { - compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; - device_type = "pci"; - reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ - bus-range = <0 255>; - linux,pci-domain = <0>; - #address-cells = <3>; - #size-cells = <2>; - dma-coherent; - ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>, - <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, - <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>, - <0 0 0 2 &gic 0 0 0 137 4>, - <0 0 0 3 &gic 0 0 0 138 4>, - <0 0 0 4 &gic 0 0 0 139 4>; - msi-parent = <&v2m_0>; - }; }; &memtimer { status = "okay"; }; + +&pcie_ctlr { + status = "okay"; +}; -- 1.9.1 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v2 2/2] arm64: dts: Add support for Juno r2 board 2016-01-25 15:14 [PATCH v2 1/2] arm64: dts: move juno pcie-controller to base file Sudeep Holla @ 2016-01-25 15:14 ` Sudeep Holla 2016-01-25 19:40 ` Rob Herring 0 siblings, 1 reply; 3+ messages in thread From: Sudeep Holla @ 2016-01-25 15:14 UTC (permalink / raw) To: linux-arm-kernel Juno r2 is identical to Juno r1 with Cortex A57 cores replaced by Cortex A72 cores. Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> --- Documentation/devicetree/bindings/arm/arm-boards | 1 + arch/arm64/boot/dts/arm/Makefile | 2 +- .../boot/dts/arm/{juno-r1.dts => juno-r2.dts} | 30 +++++++++++----------- 3 files changed, 17 insertions(+), 16 deletions(-) copy arch/arm64/boot/dts/arm/{juno-r1.dts => juno-r2.dts} (87%) diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index 1a709970e7f7..70601a58c433 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -180,6 +180,7 @@ described under the RS1 memory mapping. Required properties (in root node): compatible = "arm,juno"; /* For Juno r0 board */ compatible = "arm,juno-r1"; /* For Juno r1 board */ + compatible = "arm,juno-r2"; /* For Juno r2 board */ Required nodes: The description for the board must include: diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile index bb3c07209676..c0bf56b9ce3d 100644 --- a/arch/arm64/boot/dts/arm/Makefile +++ b/arch/arm64/boot/dts/arm/Makefile @@ -1,5 +1,5 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb -dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r2.dts similarity index 87% copy from arch/arm64/boot/dts/arm/juno-r1.dts copy to arch/arm64/boot/dts/arm/juno-r2.dts index d95d9e7e2dc0..88ecd6182b67 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r2.dts @@ -11,8 +11,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> / { - model = "ARM Juno development board (r1)"; - compatible = "arm,juno-r1", "arm,juno", "arm,vexpress"; + model = "ARM Juno development board (r2)"; + compatible = "arm,juno-r2", "arm,juno", "arm,vexpress"; interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -37,10 +37,10 @@ cpu-map { cluster0 { core0 { - cpu = <&A57_0>; + cpu = <&A72_0>; }; core1 { - cpu = <&A57_1>; + cpu = <&A72_1>; }; }; @@ -82,22 +82,22 @@ }; }; - A57_0: cpu at 0 { - compatible = "arm,cortex-a57","arm,armv8"; + A72_0: cpu at 0 { + compatible = "arm,cortex-a72","arm,armv8"; reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; - next-level-cache = <&A57_L2>; + next-level-cache = <&A72_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; - A57_1: cpu at 1 { - compatible = "arm,cortex-a57","arm,armv8"; + A72_1: cpu at 1 { + compatible = "arm,cortex-a72","arm,armv8"; reg = <0x0 0x1>; device_type = "cpu"; enable-method = "psci"; - next-level-cache = <&A57_L2>; + next-level-cache = <&A72_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; @@ -142,7 +142,7 @@ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; - A57_L2: l2-cache0 { + A72_L2: l2-cache0 { compatible = "cache"; }; @@ -151,12 +151,12 @@ }; }; - pmu_a57 { - compatible = "arm,cortex-a57-pmu"; + pmu_a72 { + compatible = "arm,cortex-a72-pmu"; interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&A57_0>, - <&A57_1>; + interrupt-affinity = <&A72_0>, + <&A72_1>; }; pmu_a53 { -- 1.9.1 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v2 2/2] arm64: dts: Add support for Juno r2 board 2016-01-25 15:14 ` [PATCH v2 2/2] arm64: dts: Add support for Juno r2 board Sudeep Holla @ 2016-01-25 19:40 ` Rob Herring 0 siblings, 0 replies; 3+ messages in thread From: Rob Herring @ 2016-01-25 19:40 UTC (permalink / raw) To: linux-arm-kernel On Mon, Jan 25, 2016 at 03:14:09PM +0000, Sudeep Holla wrote: > Juno r2 is identical to Juno r1 with Cortex A57 cores replaced by > Cortex A72 cores. > > Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> > Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> > --- > Documentation/devicetree/bindings/arm/arm-boards | 1 + > arch/arm64/boot/dts/arm/Makefile | 2 +- > .../boot/dts/arm/{juno-r1.dts => juno-r2.dts} | 30 +++++++++++----------- > 3 files changed, 17 insertions(+), 16 deletions(-) > copy arch/arm64/boot/dts/arm/{juno-r1.dts => juno-r2.dts} (87%) Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-01-25 19:40 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-01-25 15:14 [PATCH v2 1/2] arm64: dts: move juno pcie-controller to base file Sudeep Holla 2016-01-25 15:14 ` [PATCH v2 2/2] arm64: dts: Add support for Juno r2 board Sudeep Holla 2016-01-25 19:40 ` Rob Herring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox