From: jaz@semihalf.com (Grzegorz Jaszczyk)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 06/17] ARM: dts: mvebu: armada-39x: update the SDHCI node on Armada 39x
Date: Thu, 4 Aug 2016 12:14:09 +0200 [thread overview]
Message-ID: <1470305660-6601-7-git-send-email-jaz@semihalf.com> (raw)
In-Reply-To: <1470305660-6601-1-git-send-email-jaz@semihalf.com>
Commit 1140011ee9d9 ("mmc: sdhci-pxav3: Modify clock settings
for the SDR50 and DDR50 modes") has extended the Device Tree
binding used to describe PXAv3 SDHCI controllers in order to be
able to use the SDR50 and DDR50 modes.
This commit updates the Device Tree description of the Armada
39x SDHCI controller in other to take advantage of this
functionality.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-39x.dtsi | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index dc6efd3..cb66f20 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -380,7 +380,10 @@
sdhci at d8000 {
compatible = "marvell,armada-380-sdhci";
- reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+ reg-names = "sdhci", "mbus", "conf-sdio3";
+ reg = <0xd8000 0x1000>,
+ <0xdc000 0x100>,
+ <0x18454 0x4>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 17>;
mrvl,clk-delay-cycles = <0x1F>;
--
1.8.3.1
next prev parent reply other threads:[~2016-08-04 10:14 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-04 10:14 [PATCH v2 00/17] ARM: mvebu: misc Armada 38x/39x DT and v7 defconfig improvements Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 01/17] ARM: mvebu: enable MTD command line partition table in mvebu_v7_defconfig Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 02/17] ARM: mvebu: enable UBI and UBIFS " Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 03/17] ARM: dts: mvebu: a385-db-ap: enable USB (orion-ehci) port Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 04/17] ARM: dts: mvebu: a385-db-ap: add default partition description for NAND Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 05/17] ARM: dts: mvebu: armada-390: add missing compatibility string and bracket Grzegorz Jaszczyk
2016-08-04 10:14 ` Grzegorz Jaszczyk [this message]
2016-08-04 10:14 ` [PATCH v2 07/17] ARM: dts: mvebu: armada-39x: enable PMU, CA9 SoC Controller and Coherency fabric Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 08/17] ARM: dts: mvebu: armada-39x: enable the thermal sensor in Armada-39x SoCs Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 09/17] ARM: dts: mvebu: armada-39x: enable watchdog for all " Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 10/17] ARM: dts: mvebu: armada-39x: add missing nodes describing GPIO's Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 11/17] ARM: dts: mvebu: armada-39x: add missing nodes describing USB2.0 and USB3.0 Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 12/17] ARM: dts: mvebu: armada-39x: enable rtc for all Armada-39x SoCs Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 13/17] ARM: dts: mvebu: armada-395: add support for the Armada 395 SoC family Grzegorz Jaszczyk
2016-08-04 18:18 ` Rob Herring
2016-08-04 10:14 ` [PATCH v2 14/17] ARM: dts: mvebu: armada-398: update the dtsi about missing interfaces Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 15/17] ARM: dts: mvebu: armada-398-db: enable supported usb interfaces Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 16/17] ARM: dts: mvebu: armada-390-db: add support for the Armada 390 DB board Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 17/17] ARM: dts: mvebu: armada-395-gp: add support for the Armada 395 GP Board Grzegorz Jaszczyk
2016-08-04 18:22 ` Rob Herring
2016-08-08 15:03 ` [PATCH v2 00/17] ARM: mvebu: misc Armada 38x/39x DT and v7 defconfig improvements Gregory CLEMENT
2016-08-09 10:08 ` Grzegorz Jaszczyk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470305660-6601-7-git-send-email-jaz@semihalf.com \
--to=jaz@semihalf.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox