From: jaz@semihalf.com (Grzegorz Jaszczyk)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 07/17] ARM: dts: mvebu: armada-39x: enable PMU, CA9 SoC Controller and Coherency fabric
Date: Thu, 4 Aug 2016 12:14:10 +0200 [thread overview]
Message-ID: <1470305660-6601-8-git-send-email-jaz@semihalf.com> (raw)
In-Reply-To: <1470305660-6601-1-git-send-email-jaz@semihalf.com>
This commit enables:
- CA9's Performance Monitor Unit
- CA9 MPcore SoC Controller
- Coherency fabric
on Armada 39x, basing on the Armada 38x (which has the same CA9 CPU).
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Lior Amsalem <alior@marvell.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/armada-39x.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index cb66f20..8a22c02 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -78,6 +78,11 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts-extended = <&mpic 3>;
+ };
+
soc {
compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus",
"simple-bus";
@@ -322,6 +327,16 @@
reg = <0x20800 0x10>;
};
+ mpcore-soc-ctrl at 20d20 {
+ compatible = "marvell,armada-380-mpcore-soc-ctrl";
+ reg = <0x20d20 0x6c>;
+ };
+
+ coherency-fabric at 21010 {
+ compatible = "marvell,armada-380-coherency-fabric";
+ reg = <0x21010 0x1c>;
+ };
+
pmsu at 22000 {
compatible = "marvell,armada-390-pmsu",
"marvell,armada-380-pmsu";
--
1.8.3.1
next prev parent reply other threads:[~2016-08-04 10:14 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-04 10:14 [PATCH v2 00/17] ARM: mvebu: misc Armada 38x/39x DT and v7 defconfig improvements Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 01/17] ARM: mvebu: enable MTD command line partition table in mvebu_v7_defconfig Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 02/17] ARM: mvebu: enable UBI and UBIFS " Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 03/17] ARM: dts: mvebu: a385-db-ap: enable USB (orion-ehci) port Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 04/17] ARM: dts: mvebu: a385-db-ap: add default partition description for NAND Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 05/17] ARM: dts: mvebu: armada-390: add missing compatibility string and bracket Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 06/17] ARM: dts: mvebu: armada-39x: update the SDHCI node on Armada 39x Grzegorz Jaszczyk
2016-08-04 10:14 ` Grzegorz Jaszczyk [this message]
2016-08-04 10:14 ` [PATCH v2 08/17] ARM: dts: mvebu: armada-39x: enable the thermal sensor in Armada-39x SoCs Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 09/17] ARM: dts: mvebu: armada-39x: enable watchdog for all " Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 10/17] ARM: dts: mvebu: armada-39x: add missing nodes describing GPIO's Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 11/17] ARM: dts: mvebu: armada-39x: add missing nodes describing USB2.0 and USB3.0 Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 12/17] ARM: dts: mvebu: armada-39x: enable rtc for all Armada-39x SoCs Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 13/17] ARM: dts: mvebu: armada-395: add support for the Armada 395 SoC family Grzegorz Jaszczyk
2016-08-04 18:18 ` Rob Herring
2016-08-04 10:14 ` [PATCH v2 14/17] ARM: dts: mvebu: armada-398: update the dtsi about missing interfaces Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 15/17] ARM: dts: mvebu: armada-398-db: enable supported usb interfaces Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 16/17] ARM: dts: mvebu: armada-390-db: add support for the Armada 390 DB board Grzegorz Jaszczyk
2016-08-04 10:14 ` [PATCH v2 17/17] ARM: dts: mvebu: armada-395-gp: add support for the Armada 395 GP Board Grzegorz Jaszczyk
2016-08-04 18:22 ` Rob Herring
2016-08-08 15:03 ` [PATCH v2 00/17] ARM: mvebu: misc Armada 38x/39x DT and v7 defconfig improvements Gregory CLEMENT
2016-08-09 10:08 ` Grzegorz Jaszczyk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470305660-6601-8-git-send-email-jaz@semihalf.com \
--to=jaz@semihalf.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox