* [Patch v4 8/9] driver/edac/layerscape_edac: Add Layerscape EDAC support [not found] <1470779760-16483-1-git-send-email-york.sun@nxp.com> @ 2016-08-09 21:55 ` York Sun 2016-08-12 9:12 ` Borislav Petkov 0 siblings, 1 reply; 3+ messages in thread From: York Sun @ 2016-08-09 21:55 UTC (permalink / raw) To: linux-arm-kernel Add DDR EDAC for ARM-based compatible controllers. Both big-endian and little-endian are supported, as specified in device tree. Signed-off-by: York Sun <york.sun@nxp.com> --- Change log v4: Drop adding atomic_scrub() for arm64 Drop NO_IRQ v3: no change v2: Create new driver using shared DDR object arch/arm64/Kconfig.platforms | 1 + drivers/edac/Kconfig | 7 +++++ drivers/edac/Makefile | 3 ++ drivers/edac/fsl_ddr_edac.c | 2 +- drivers/edac/layerscape_edac.c | 67 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 79 insertions(+), 1 deletion(-) create mode 100644 drivers/edac/layerscape_edac.c diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 7ef1d05..185a215 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -41,6 +41,7 @@ config ARCH_EXYNOS config ARCH_LAYERSCAPE bool "ARMv8 based Freescale Layerscape SoC family" + select EDAC_SUPPORT help This enables support for the Freescale Layerscape SoC family. diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 6ca7474..f1ac4e2 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -258,6 +258,13 @@ config EDAC_MPC85XX Support for error detection and correction on the Freescale MPC8349, MPC8560, MPC8540, MPC8548, T4240 +config EDAC_LAYERSCAPE + tristate "Freescale Layerscape DDR" + depends on EDAC_MM_EDAC && ARCH_LAYERSCAPE + help + Support for error detection and correction on Freescale memory + controllers on Layerscape SoCs. + config EDAC_MV64X60 tristate "Marvell MV64x60" depends on EDAC_MM_EDAC && MV64X60 diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index ee047a4..910dc83 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -54,6 +54,9 @@ obj-$(CONFIG_EDAC_PASEMI) += pasemi_edac.o mpc85xx_edac_mod-y := fsl_ddr_edac.o mpc85xx_edac.o obj-$(CONFIG_EDAC_MPC85XX) += mpc85xx_edac_mod.o +layerscape_edac_mod-y := fsl_ddr_edac.o layerscape_edac.o +obj-$(CONFIG_EDAC_LAYERSCAPE) += layerscape_edac_mod.o + obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o obj-$(CONFIG_EDAC_CELL) += cell_edac.o obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o diff --git a/drivers/edac/fsl_ddr_edac.c b/drivers/edac/fsl_ddr_edac.c index d8ce1f6..afade14 100644 --- a/drivers/edac/fsl_ddr_edac.c +++ b/drivers/edac/fsl_ddr_edac.c @@ -26,6 +26,7 @@ #include <linux/of_platform.h> #include <linux/of_device.h> +#include <linux/of_address.h> #include "edac_module.h" #include "edac_core.h" #include "fsl_ddr_edac.h" @@ -478,7 +479,6 @@ int fsl_mc_err_probe(struct platform_device *op) pdata = mci->pvt_info; pdata->name = "fsl_mc_err"; - pdata->irq = NO_IRQ; mci->pdev = &op->dev; pdata->edac_idx = edac_mc_idx++; dev_set_drvdata(mci->pdev, mci); diff --git a/drivers/edac/layerscape_edac.c b/drivers/edac/layerscape_edac.c new file mode 100644 index 0000000..6ba771d --- /dev/null +++ b/drivers/edac/layerscape_edac.c @@ -0,0 +1,67 @@ +/* + * Freescale Memory Controller kernel module + * + * Derived from mpc85xx_edac.c + * Author: Dave Jiang <djiang@mvista.com> + * + * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include "edac_core.h" +#include "fsl_ddr_edac.h" + +static const struct of_device_id fsl_ddr_mc_err_of_match[] = { + { .compatible = "fsl,qoriq-memory-controller", }, + {}, +}; +MODULE_DEVICE_TABLE(of, fsl_ddr_mc_err_of_match); + +static struct platform_driver fsl_ddr_mc_err_driver = { + .probe = fsl_mc_err_probe, + .remove = fsl_mc_err_remove, + .driver = { + .name = "fsl_ddr_mc_err", + .of_match_table = fsl_ddr_mc_err_of_match, + }, +}; + +static int __init fsl_ddr_mc_init(void) +{ + int res = 0; + + /* make sure error reporting method is sane */ + switch (edac_op_state) { + case EDAC_OPSTATE_POLL: + case EDAC_OPSTATE_INT: + break; + default: + edac_op_state = EDAC_OPSTATE_INT; + break; + } + + res = platform_driver_register(&fsl_ddr_mc_err_driver); + if (res) { + pr_err("Layerscape EDAC: MC fails to register\n"); + return res; + } + + return 0; +} + +module_init(fsl_ddr_mc_init); + +static void __exit fsl_ddr_mc_exit(void) +{ + platform_driver_unregister(&fsl_ddr_mc_err_driver); +} + +module_exit(fsl_ddr_mc_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Montavista Software, Inc."); +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, + "EDAC Error Reporting state: 0=Poll, 2=Interrupt"); -- 2.7.4 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* [Patch v4 8/9] driver/edac/layerscape_edac: Add Layerscape EDAC support 2016-08-09 21:55 ` [Patch v4 8/9] driver/edac/layerscape_edac: Add Layerscape EDAC support York Sun @ 2016-08-12 9:12 ` Borislav Petkov 2016-08-23 16:46 ` york sun 0 siblings, 1 reply; 3+ messages in thread From: Borislav Petkov @ 2016-08-12 9:12 UTC (permalink / raw) To: linux-arm-kernel On Tue, Aug 09, 2016 at 02:55:45PM -0700, York Sun wrote: > Add DDR EDAC for ARM-based compatible controllers. Both big-endian > and little-endian are supported, as specified in device tree. > > Signed-off-by: York Sun <york.sun@nxp.com> > > --- > Change log > v4: Drop adding atomic_scrub() for arm64 > Drop NO_IRQ > v3: no change > v2: Create new driver using shared DDR object > > arch/arm64/Kconfig.platforms | 1 + > drivers/edac/Kconfig | 7 +++++ > drivers/edac/Makefile | 3 ++ > drivers/edac/fsl_ddr_edac.c | 2 +- > drivers/edac/layerscape_edac.c | 67 ++++++++++++++++++++++++++++++++++++++++++ > 5 files changed, 79 insertions(+), 1 deletion(-) > create mode 100644 drivers/edac/layerscape_edac.c > > diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms > index 7ef1d05..185a215 100644 > --- a/arch/arm64/Kconfig.platforms > +++ b/arch/arm64/Kconfig.platforms > @@ -41,6 +41,7 @@ config ARCH_EXYNOS > > config ARCH_LAYERSCAPE > bool "ARMv8 based Freescale Layerscape SoC family" > + select EDAC_SUPPORT > help > This enables support for the Freescale Layerscape SoC family. > > diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig > index 6ca7474..f1ac4e2 100644 > --- a/drivers/edac/Kconfig > +++ b/drivers/edac/Kconfig > @@ -258,6 +258,13 @@ config EDAC_MPC85XX > Support for error detection and correction on the Freescale > MPC8349, MPC8560, MPC8540, MPC8548, T4240 > > +config EDAC_LAYERSCAPE > + tristate "Freescale Layerscape DDR" > + depends on EDAC_MM_EDAC && ARCH_LAYERSCAPE > + help > + Support for error detection and correction on Freescale memory > + controllers on Layerscape SoCs. > + > config EDAC_MV64X60 > tristate "Marvell MV64x60" > depends on EDAC_MM_EDAC && MV64X60 > diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile > index ee047a4..910dc83 100644 > --- a/drivers/edac/Makefile > +++ b/drivers/edac/Makefile > @@ -54,6 +54,9 @@ obj-$(CONFIG_EDAC_PASEMI) += pasemi_edac.o > mpc85xx_edac_mod-y := fsl_ddr_edac.o mpc85xx_edac.o > obj-$(CONFIG_EDAC_MPC85XX) += mpc85xx_edac_mod.o > > +layerscape_edac_mod-y := fsl_ddr_edac.o layerscape_edac.o > +obj-$(CONFIG_EDAC_LAYERSCAPE) += layerscape_edac_mod.o > + > obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o > obj-$(CONFIG_EDAC_CELL) += cell_edac.o > obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o > diff --git a/drivers/edac/fsl_ddr_edac.c b/drivers/edac/fsl_ddr_edac.c > index d8ce1f6..afade14 100644 > --- a/drivers/edac/fsl_ddr_edac.c > +++ b/drivers/edac/fsl_ddr_edac.c > @@ -26,6 +26,7 @@ > > #include <linux/of_platform.h> > #include <linux/of_device.h> > +#include <linux/of_address.h> > #include "edac_module.h" > #include "edac_core.h" > #include "fsl_ddr_edac.h" > @@ -478,7 +479,6 @@ int fsl_mc_err_probe(struct platform_device *op) > > pdata = mci->pvt_info; > pdata->name = "fsl_mc_err"; > - pdata->irq = NO_IRQ; > mci->pdev = &op->dev; > pdata->edac_idx = edac_mc_idx++; > dev_set_drvdata(mci->pdev, mci); > diff --git a/drivers/edac/layerscape_edac.c b/drivers/edac/layerscape_edac.c > new file mode 100644 > index 0000000..6ba771d > --- /dev/null > +++ b/drivers/edac/layerscape_edac.c > @@ -0,0 +1,67 @@ > +/* > + * Freescale Memory Controller kernel module > + * > + * Derived from mpc85xx_edac.c Up to here is fine... > + * Author: Dave Jiang <djiang@mvista.com> > + * > + * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under > + * the terms of the GNU General Public License version 2. This program > + * is licensed "as is" without any warranty of any kind, whether express > + * or implied. > + */ ... but I'm not sure about this. This is a new driver which you are adding and not Dave. You probably could say "Author: York Sun <york.sun@nxp.com> (c) NXP ... Derived from mpc85xx_edac.c, (c) Montavista ..." so that we have both copyright tags in there. > + > +#include "edac_core.h" > +#include "fsl_ddr_edac.h" > + > +static const struct of_device_id fsl_ddr_mc_err_of_match[] = { > + { .compatible = "fsl,qoriq-memory-controller", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, fsl_ddr_mc_err_of_match); > + > +static struct platform_driver fsl_ddr_mc_err_driver = { > + .probe = fsl_mc_err_probe, > + .remove = fsl_mc_err_remove, > + .driver = { > + .name = "fsl_ddr_mc_err", > + .of_match_table = fsl_ddr_mc_err_of_match, > + }, > +}; > + > +static int __init fsl_ddr_mc_init(void) > +{ > + int res = 0; No need to init it since it is going to be overwritten anyway. > + > + /* make sure error reporting method is sane */ > + switch (edac_op_state) { > + case EDAC_OPSTATE_POLL: > + case EDAC_OPSTATE_INT: > + break; > + default: > + edac_op_state = EDAC_OPSTATE_INT; > + break; > + } > + > + res = platform_driver_register(&fsl_ddr_mc_err_driver); > + if (res) { > + pr_err("Layerscape EDAC: MC fails to register\n"); This is done with pr_fmt(). Grep the tree for examples. You could define EDAC_MOD_STR like the rest of the drivers do. > + return res; > + } > + > + return 0; > +} > + > +module_init(fsl_ddr_mc_init); > + > +static void __exit fsl_ddr_mc_exit(void) > +{ > + platform_driver_unregister(&fsl_ddr_mc_err_driver); > +} > + > +module_exit(fsl_ddr_mc_exit); > + > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("Montavista Software, Inc."); See above. > +module_param(edac_op_state, int, 0444); > +MODULE_PARM_DESC(edac_op_state, > + "EDAC Error Reporting state: 0=Poll, 2=Interrupt"); > -- -- Regards/Gruss, Boris. ECO tip #101: Trim your mails when you reply. -- ^ permalink raw reply [flat|nested] 3+ messages in thread
* [Patch v4 8/9] driver/edac/layerscape_edac: Add Layerscape EDAC support 2016-08-12 9:12 ` Borislav Petkov @ 2016-08-23 16:46 ` york sun 0 siblings, 0 replies; 3+ messages in thread From: york sun @ 2016-08-23 16:46 UTC (permalink / raw) To: linux-arm-kernel On 08/12/2016 02:13 AM, Borislav Petkov wrote: > On Tue, Aug 09, 2016 at 02:55:45PM -0700, York Sun wrote: >> Add DDR EDAC for ARM-based compatible controllers. Both big-endian >> and little-endian are supported, as specified in device tree. >> >> Signed-off-by: York Sun <york.sun@nxp.com> >> >> --- >> Change log >> v4: Drop adding atomic_scrub() for arm64 >> Drop NO_IRQ >> v3: no change >> v2: Create new driver using shared DDR object >> >> arch/arm64/Kconfig.platforms | 1 + >> drivers/edac/Kconfig | 7 +++++ >> drivers/edac/Makefile | 3 ++ >> drivers/edac/fsl_ddr_edac.c | 2 +- >> drivers/edac/layerscape_edac.c | 67 ++++++++++++++++++++++++++++++++++++++++++ >> 5 files changed, 79 insertions(+), 1 deletion(-) >> create mode 100644 drivers/edac/layerscape_edac.c >> >> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms >> index 7ef1d05..185a215 100644 >> --- a/arch/arm64/Kconfig.platforms >> +++ b/arch/arm64/Kconfig.platforms >> @@ -41,6 +41,7 @@ config ARCH_EXYNOS >> >> config ARCH_LAYERSCAPE >> bool "ARMv8 based Freescale Layerscape SoC family" >> + select EDAC_SUPPORT >> help >> This enables support for the Freescale Layerscape SoC family. >> >> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig >> index 6ca7474..f1ac4e2 100644 >> --- a/drivers/edac/Kconfig >> +++ b/drivers/edac/Kconfig >> @@ -258,6 +258,13 @@ config EDAC_MPC85XX >> Support for error detection and correction on the Freescale >> MPC8349, MPC8560, MPC8540, MPC8548, T4240 >> >> +config EDAC_LAYERSCAPE >> + tristate "Freescale Layerscape DDR" >> + depends on EDAC_MM_EDAC && ARCH_LAYERSCAPE >> + help >> + Support for error detection and correction on Freescale memory >> + controllers on Layerscape SoCs. >> + >> config EDAC_MV64X60 >> tristate "Marvell MV64x60" >> depends on EDAC_MM_EDAC && MV64X60 >> diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile >> index ee047a4..910dc83 100644 >> --- a/drivers/edac/Makefile >> +++ b/drivers/edac/Makefile >> @@ -54,6 +54,9 @@ obj-$(CONFIG_EDAC_PASEMI) += pasemi_edac.o >> mpc85xx_edac_mod-y := fsl_ddr_edac.o mpc85xx_edac.o >> obj-$(CONFIG_EDAC_MPC85XX) += mpc85xx_edac_mod.o >> >> +layerscape_edac_mod-y := fsl_ddr_edac.o layerscape_edac.o >> +obj-$(CONFIG_EDAC_LAYERSCAPE) += layerscape_edac_mod.o >> + >> obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o >> obj-$(CONFIG_EDAC_CELL) += cell_edac.o >> obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o >> diff --git a/drivers/edac/fsl_ddr_edac.c b/drivers/edac/fsl_ddr_edac.c >> index d8ce1f6..afade14 100644 >> --- a/drivers/edac/fsl_ddr_edac.c >> +++ b/drivers/edac/fsl_ddr_edac.c >> @@ -26,6 +26,7 @@ >> >> #include <linux/of_platform.h> >> #include <linux/of_device.h> >> +#include <linux/of_address.h> >> #include "edac_module.h" >> #include "edac_core.h" >> #include "fsl_ddr_edac.h" >> @@ -478,7 +479,6 @@ int fsl_mc_err_probe(struct platform_device *op) >> >> pdata = mci->pvt_info; >> pdata->name = "fsl_mc_err"; >> - pdata->irq = NO_IRQ; >> mci->pdev = &op->dev; >> pdata->edac_idx = edac_mc_idx++; >> dev_set_drvdata(mci->pdev, mci); >> diff --git a/drivers/edac/layerscape_edac.c b/drivers/edac/layerscape_edac.c >> new file mode 100644 >> index 0000000..6ba771d >> --- /dev/null >> +++ b/drivers/edac/layerscape_edac.c >> @@ -0,0 +1,67 @@ >> +/* >> + * Freescale Memory Controller kernel module >> + * >> + * Derived from mpc85xx_edac.c > > Up to here is fine... > >> + * Author: Dave Jiang <djiang@mvista.com> >> + * >> + * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under >> + * the terms of the GNU General Public License version 2. This program >> + * is licensed "as is" without any warranty of any kind, whether express >> + * or implied. >> + */ > > ... but I'm not sure about this. This is a new driver which you are > adding and not Dave. You probably could say > > "Author: York Sun <york.sun@nxp.com> > (c) NXP ... > > Derived from mpc85xx_edac.c, (c) Montavista ..." > > so that we have both copyright tags in there. > Sorry for the late response. I was out of office last week. Will respin this patch. >> + >> +#include "edac_core.h" >> +#include "fsl_ddr_edac.h" >> + >> +static const struct of_device_id fsl_ddr_mc_err_of_match[] = { >> + { .compatible = "fsl,qoriq-memory-controller", }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, fsl_ddr_mc_err_of_match); >> + >> +static struct platform_driver fsl_ddr_mc_err_driver = { >> + .probe = fsl_mc_err_probe, >> + .remove = fsl_mc_err_remove, >> + .driver = { >> + .name = "fsl_ddr_mc_err", >> + .of_match_table = fsl_ddr_mc_err_of_match, >> + }, >> +}; >> + >> +static int __init fsl_ddr_mc_init(void) >> +{ >> + int res = 0; > > No need to init it since it is going to be overwritten anyway. OK. > >> + >> + /* make sure error reporting method is sane */ >> + switch (edac_op_state) { >> + case EDAC_OPSTATE_POLL: >> + case EDAC_OPSTATE_INT: >> + break; >> + default: >> + edac_op_state = EDAC_OPSTATE_INT; >> + break; >> + } >> + >> + res = platform_driver_register(&fsl_ddr_mc_err_driver); >> + if (res) { >> + pr_err("Layerscape EDAC: MC fails to register\n"); > > This is done with pr_fmt(). Grep the tree for examples. > > You could define EDAC_MOD_STR like the rest of the drivers do. > Will fix. > > >> + return res; >> + } >> + >> + return 0; >> +} >> + >> +module_init(fsl_ddr_mc_init); >> + >> +static void __exit fsl_ddr_mc_exit(void) >> +{ >> + platform_driver_unregister(&fsl_ddr_mc_err_driver); >> +} >> + >> +module_exit(fsl_ddr_mc_exit); >> + >> +MODULE_LICENSE("GPL"); >> +MODULE_AUTHOR("Montavista Software, Inc."); > > See above. Will fix. > >> +module_param(edac_op_state, int, 0444); >> +MODULE_PARM_DESC(edac_op_state, >> + "EDAC Error Reporting state: 0=Poll, 2=Interrupt"); >> -- > York ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-08-23 16:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1470779760-16483-1-git-send-email-york.sun@nxp.com>
2016-08-09 21:55 ` [Patch v4 8/9] driver/edac/layerscape_edac: Add Layerscape EDAC support York Sun
2016-08-12 9:12 ` Borislav Petkov
2016-08-23 16:46 ` york sun
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox