[PATCH 2/4] ARM: Alpine: early-debug print support

[PATCH 2/4] ARM: Alpine: early-debug print support

[Tsahee Zidenberg]

Alpine platform includes UART8250 that can be used for early prints.

Signed-off-by: Saeed Bishara <saeed@annapurnalabs.com>
Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com>
---
 arch/arm/Kconfig.debug | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 5ddd490..db6c389 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1031,6 +1031,14 @@ choice
 		  This option selects UART0 on VIA/Wondermedia System-on-a-chip
 		  devices, including VT8500, WM8505, WM8650 and WM8850.
 
+	config DEBUG_ALPINE_UART0
+		bool "Kernel low-level debugging messages via Alpine UART0"
+		depends on ARCH_ALPINE
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Alpine based platforms.
+
 	config DEBUG_LL_UART_NONE
 		bool "No low-level debugging UART"
 		depends on !ARCH_MULTIPLATFORM
@@ -1312,6 +1320,7 @@ config DEBUG_UART_PHYS
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
 	default 0xfffe8600 if DEBUG_UART_BCM63XX
 	default 0xfffff700 if ARCH_IOP33X
+	default 0xfd883000 if DEBUG_ALPINE_UART0
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_LL_UART_EFM32 || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
@@ -1394,6 +1403,7 @@ config DEBUG_UART_VIRT
 	default 0xfef36000 if DEBUG_HIGHBANK_UART
 	default 0xfefff700 if ARCH_IOP33X
 	default 0xff003000 if DEBUG_U300_UART
+	default 0xfd883000 if DEBUG_ALPINE_UART0
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
@@ -1411,7 +1421,7 @@ config DEBUG_UART_8250_WORD
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	depends on DEBUG_UART_8250_SHIFT >= 2
 	default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
-		ARCH_KEYSTONE || \
+		ARCH_KEYSTONE || DEBUG_ALPINE_UART0 || \
 		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
 		DEBUG_DAVINCI_DA8XX_UART2 || \
 		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
-- 
1.9.1

[PATCH 2/4] ARM: Alpine: early-debug print support

[Arnd Bergmann]

On Sunday 25 January 2015 20:30:52 Tsahee Zidenberg wrote:
> Alpine platform includes UART8250 that can be used for early prints.
> 
> Signed-off-by: Saeed Bishara <saeed@annapurnalabs.com>
> Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com>

The entries look ok, but please keep them all sorted in the
respective lists.

> ---
>  arch/arm/Kconfig.debug | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 5ddd490..db6c389 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -1031,6 +1031,14 @@ choice
>  		  This option selects UART0 on VIA/Wondermedia System-on-a-chip
>  		  devices, including VT8500, WM8505, WM8650 and WM8850.
>  
> +	config DEBUG_ALPINE_UART0
> +		bool "Kernel low-level debugging messages via Alpine UART0"
> +		depends on ARCH_ALPINE
> +		select DEBUG_UART_8250
> +		help
> +		  Say Y here if you want kernel low-level debugging support
> +		  on Alpine based platforms.
> +

This one is sorted alphabetically

>  	config DEBUG_LL_UART_NONE
>  		bool "No low-level debugging UART"
>  		depends on !ARCH_MULTIPLATFORM
> @@ -1312,6 +1320,7 @@ config DEBUG_UART_PHYS
>  	default 0xfff36000 if DEBUG_HIGHBANK_UART
>  	default 0xfffe8600 if DEBUG_UART_BCM63XX
>  	default 0xfffff700 if ARCH_IOP33X
> +	default 0xfd883000 if DEBUG_ALPINE_UART0
>  	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
>  		DEBUG_LL_UART_EFM32 || \

And the other two are sorted by address.

	Arnd