* [PATCH] ARM: da850: Fix LEGO EV3 battery voltage gpio
@ 2017-12-03 19:29 David Lechner
2017-12-03 19:56 ` David Lechner
0 siblings, 1 reply; 2+ messages in thread
From: David Lechner @ 2017-12-03 19:29 UTC (permalink / raw)
To: linux-arm-kernel
This fixes the battery voltage monitoring gpio-hog settings.
When the gpio is low, it turns off the battery voltage to the ADC chip.
However, this needs to be on all of the time so that we can monitor
battery voltage.
Signed-off-by: David Lechner <david@lechnology.com>
---
arch/arm/boot/dts/da850-lego-ev3.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index aeb5fb0..9d15982 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -463,7 +463,7 @@
batt_volt_en {
gpio-hog;
gpios = <6 GPIO_ACTIVE_HIGH>;
- output-low;
+ output-high;
};
/* Don't impede Bluetooth clock signal */
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-12-03 19:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-12-03 19:29 [PATCH] ARM: da850: Fix LEGO EV3 battery voltage gpio David Lechner
2017-12-03 19:56 ` David Lechner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox