public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: chunfeng.yun@mediatek.com (Chunfeng Yun)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/7] Add USB remote wakeup driver
Date: Sat, 9 Dec 2017 16:45:29 +0800	[thread overview]
Message-ID: <1512809136-2779-1-git-send-email-chunfeng.yun@mediatek.com> (raw)

    These patches introduce the SSUSB and SPM glue layer driver which is
used to support usb remote wakeup. Usually the glue layer is put into
a system controller, such as PERICFG module.
    The old way to support usb wakeup is put into SSUSB controller drivers,
including xhci-mtk driver and mtu3 driver, but there are some problems:
    1. can't disdinguish the relation between glue layer and SSUSB IP
       when SoCs supports multi SSUSB IPs;
    2. duplicated code for wakeup are put into both xhci-mtk and mtu3
       drivers;
    3. the glue layer may vary on different SoCs with SSUSB IP, and will
       make SSUSB controller drivers complicated;
    In order to resolve these problems, it's useful to make the glue layer
transparent by extracting a seperated driver, meanwhile to reduce the
duplicated code and simplify SSUSB controller drivers.

Changes from v1:
 * Introduce USB remote wakeup driver
 * Use the new way to support remote wakeup for SSUSB controller drivers
 * Add binding document for USB remote wakeup driver
 * Update binding documents of SSUSB controller drivers
 * Update DTS of MT8173 platform

Chunfeng Yun (7):
  soc: mediatek: Add USB wakeup driver
  dt-bindings: soc: mediatek: add bindings document for USB wakeup
  usb: xhci-mtk: use APIs of mtu_wakeup to support remote wakeup
  usb: mtu3: use APIs of mtu_wakeup to support remote wakeup
  dt-bindings: usb: mtk-xhci: add USB wakeup properties
  dt-bindings: usb: mtu3: add USB wakeup properties
  arm64: dts: mt8173: add uwk node and remove unused usb property

 .../bindings/soc/mediatek/usb-wakeup.txt           |  77 +++
 .../devicetree/bindings/usb/mediatek,mtk-xhci.txt  |  15 +-
 .../devicetree/bindings/usb/mediatek,mtu3.txt      |  14 +-
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts        |  28 +-
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           |  16 +-
 drivers/soc/mediatek/Kconfig                       |   8 +
 drivers/soc/mediatek/Makefile                      |   1 +
 drivers/soc/mediatek/mtk-usb-wakeup.c              | 519 +++++++++++++++++++++
 drivers/usb/host/xhci-mtk.c                        |  39 +-
 drivers/usb/host/xhci-mtk.h                        |   2 +
 drivers/usb/mtu3/mtu3.h                            |   2 +
 drivers/usb/mtu3/mtu3_host.c                       |  39 +-
 include/dt-bindings/soc/mediatek,usb-wakeup.h      |  15 +
 include/linux/soc/mediatek/usb-wakeup.h            |  88 ++++
 14 files changed, 803 insertions(+), 60 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/soc/mediatek/usb-wakeup.txt
 create mode 100644 drivers/soc/mediatek/mtk-usb-wakeup.c
 create mode 100644 include/dt-bindings/soc/mediatek,usb-wakeup.h
 create mode 100644 include/linux/soc/mediatek/usb-wakeup.h

-- 
1.9.1

             reply	other threads:[~2017-12-09  8:45 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-09  8:45 Chunfeng Yun [this message]
2017-12-09  8:45 ` [PATCH 1/7] soc: mediatek: Add USB wakeup driver Chunfeng Yun
2017-12-15 20:55   ` Rob Herring
2017-12-21  6:50     ` Chunfeng Yun
2017-12-09  8:45 ` [PATCH 2/7] dt-bindings: soc: mediatek: add bindings document for USB wakeup Chunfeng Yun
2017-12-09  8:45 ` [PATCH 3/7] usb: xhci-mtk: use APIs of mtu_wakeup to support remote wakeup Chunfeng Yun
2017-12-09  8:45 ` [PATCH 4/7] usb: mtu3: " Chunfeng Yun
2017-12-09  8:45 ` [PATCH 5/7] dt-bindings: usb: mtk-xhci: add USB wakeup properties Chunfeng Yun
2017-12-09  8:45 ` [PATCH 6/7] dt-bindings: usb: mtu3: " Chunfeng Yun
2017-12-09  8:45 ` [PATCH 7/7] arm64: dts: mt8173: add uwk node and remove unused usb property Chunfeng Yun
2017-12-15 20:55 ` [PATCH 0/7] Add USB remote wakeup driver Rob Herring
2017-12-21  6:48   ` Chunfeng Yun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1512809136-2779-1-git-send-email-chunfeng.yun@mediatek.com \
    --to=chunfeng.yun@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox