[PATCH 1/7] soc: mediatek: Add USB wakeup driver

[chunfeng.yun@mediatek.com (Chunfeng Yun)]

On Fri, 2017-12-15 at 14:55 -0600, Rob Herring wrote:
> On Sat, Dec 09, 2017 at 04:45:30PM +0800, Chunfeng Yun wrote:
> > This driver is used to support usb wakeup which is controlled by
> > the glue layer between SSUSB and SPM. Usually the glue layer is put
> > into a system controller, such as pericfg module, which is
> > represented by a syscon node in DTS.
> > Due to the glue layer may vary on different SoCs, it's useful to
> > extract a separated driver to simplify usb controller drivers.
> > 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> >  drivers/soc/mediatek/Kconfig                  |   8 +
> >  drivers/soc/mediatek/Makefile                 |   1 +
> >  drivers/soc/mediatek/mtk-usb-wakeup.c         | 519 ++++++++++++++++++++++++++
> >  include/dt-bindings/soc/mediatek,usb-wakeup.h |  15 +
> 
> This belongs in the binding patch and that should come first.
> 
> >  include/linux/soc/mediatek/usb-wakeup.h       |  88 +++++
> >  5 files changed, 631 insertions(+)
> >  create mode 100644 drivers/soc/mediatek/mtk-usb-wakeup.c
> >  create mode 100644 include/dt-bindings/soc/mediatek,usb-wakeup.h
> >  create mode 100644 include/linux/soc/mediatek/usb-wakeup.h
> 
> > +++ b/drivers/soc/mediatek/mtk-usb-wakeup.c
> > @@ -0,0 +1,519 @@
> > +/*
> > + * Copyright (c) 2017 MediaTek Inc.
> > + * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > + *
> > + * SPDX-License-Identifier: GPL-2.0
> 
> This should be the first line of the file and use a // style comment.
> 
> [...]
> 
> > diff --git a/include/dt-bindings/soc/mediatek,usb-wakeup.h b/include/dt-bindings/soc/mediatek,usb-wakeup.h
> > new file mode 100644
> > index 0000000..2461795
> > --- /dev/null
> > +++ b/include/dt-bindings/soc/mediatek,usb-wakeup.h
> > @@ -0,0 +1,15 @@
> > +/*
> > + * Copyright (c) 2017 MediaTek Inc.
> > + * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > + *
> > + * SPDX-License-Identifier: GPL-2.0
> 
> ditto. Except headers use /* */ comments...
modify it next version. Thanks