[PATCH v21 0/4] Mediatek MT8173 CMDQ support

[PATCH v21 0/4] Mediatek MT8173 CMDQ support

[houlong.wei at mediatek.com]

Hi,

This is Mediatek MT8173 Command Queue(CMDQ) driver. The CMDQ is used
to help write registers with critical time limitation, such as
updating display configuration during the vblank. It controls Global
Command Engine (GCE) hardware to achieve this requirement.
 
Changes since v20:
 -rebase to v4.15-rc1
 -move dma_map_single outside of spinlock
Changes since v19:
 -rebase to v4.10-rc2

hs.liao at mediatek.com (4):
  dt-bindings: soc: Add documentation for the MediaTek GCE unit
  mailbox: mediatek: Add Mediatek CMDQ driver
  arm64: dts: mt8173: Add GCE node
  soc: mediatek: Add Mediatek CMDQ helper

 .../devicetree/bindings/mailbox/mtk-gce.txt        |   43 ++
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           |   10 +
 drivers/mailbox/Kconfig                            |   10 +
 drivers/mailbox/Makefile                           |    2 +
 drivers/mailbox/mtk-cmdq-mailbox.c                 |  594 ++++++++++++++++++++
 drivers/soc/mediatek/Kconfig                       |   12 +
 drivers/soc/mediatek/Makefile                      |    1 +
 drivers/soc/mediatek/mtk-cmdq-helper.c             |  322 +++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h           |   77 +++
 include/linux/soc/mediatek/mtk-cmdq.h              |  174 ++++++
 10 files changed, 1245 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/mtk-gce.txt
 create mode 100644 drivers/mailbox/mtk-cmdq-mailbox.c
 create mode 100644 drivers/soc/mediatek/mtk-cmdq-helper.c
 create mode 100644 include/linux/mailbox/mtk-cmdq-mailbox.h
 create mode 100644 include/linux/soc/mediatek/mtk-cmdq.h

-- 
1.7.9.5 

[PATCH v21 1/4] dt-bindings: soc: Add documentation for the MediaTek GCE unit

[houlong.wei at mediatek.com]

From: "hs.liao@mediatek.com" <hs.liao@mediatek.com>

This adds documentation for the MediaTek Global Command Engine (GCE) unit
found in MT8173 SoCs.

Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: HS Liao <hs.liao@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/mailbox/mtk-gce.txt        |   43 ++++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/mtk-gce.txt

diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
new file mode 100644
index 0000000..d2d3ccb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -0,0 +1,43 @@
+MediaTek GCE
+===============
+
+The Global Command Engine (GCE) is used to help read/write registers with
+critical time limitation, such as updating display configuration during the
+vblank. The GCE can be used to implement the Command Queue (CMDQ) driver.
+
+CMDQ driver uses mailbox framework for communication. Please refer to
+mailbox.txt for generic information about mailbox device-tree bindings.
+
+Required properties:
+- compatible: Must be "mediatek,mt8173-gce"
+- reg: Address range of the GCE unit
+- interrupts: The interrupt signal from the GCE block
+- clock: Clocks according to the common clock binding
+- clock-names: Must be "gce" to stand for GCE clock
+- #mbox-cells: Should be 2
+
+Required properties for a client device:
+- mboxes: client use mailbox to communicate with GCE, it should have this
+  property and list of phandle, mailbox channel specifiers, and atomic
+  execution flag.
+
+Example:
+
+	gce: gce at 10212000 {
+		compatible = "mediatek,mt8173-gce";
+		reg = <0 0x10212000 0 0x1000>;
+		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_GCE>;
+		clock-names = "gce";
+
+		#mbox-cells = <2>;
+	};
+
+Example for a client device:
+
+	mmsys: clock-controller at 14000000 {
+		compatible = "mediatek,mt8173-mmsys";
+		mboxes = <&gce 0 1 /* main display with atomic execution */
+			  &gce 1 1>; /* sub display with atomic execution */
+		...
+	};
-- 
1.7.9.5

[PATCH v21 2/4] mailbox: mediatek: Add Mediatek CMDQ driver

[houlong.wei at mediatek.com]

From: "hs.liao@mediatek.com" <hs.liao@mediatek.com>

This patch is first version of Mediatek Command Queue(CMDQ) driver. The
CMDQ is used to help write registers with critical time limitation,
such as updating display configuration during the vblank. It controls
Global Command Engine (GCE) hardware to achieve this requirement.
Currently, CMDQ only supports display related hardwares, but we expect
it can be extended to other hardwares for future requirements.

Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: HS Liao <hs.liao@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/mailbox/Kconfig                  |   10 +
 drivers/mailbox/Makefile                 |    2 +
 drivers/mailbox/mtk-cmdq-mailbox.c       |  594 ++++++++++++++++++++++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h |   77 ++++
 4 files changed, 683 insertions(+)
 create mode 100644 drivers/mailbox/mtk-cmdq-mailbox.c
 create mode 100644 include/linux/mailbox/mtk-cmdq-mailbox.h

diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index ba2f152..43bb26f 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -171,4 +171,14 @@ config BCM_FLEXRM_MBOX
 	  Mailbox implementation of the Broadcom FlexRM ring manager,
 	  which provides access to various offload engines on Broadcom
 	  SoCs. Say Y here if you want to use the Broadcom FlexRM.
+
+config MTK_CMDQ_MBOX
+	bool "MediaTek CMDQ Mailbox Support"
+	depends on ARM64 && ( ARCH_MEDIATEK || COMPILE_TEST )
+	select MTK_INFRACFG
+	help
+	  Say yes here to add support for the MediaTek Command Queue (CMDQ)
+	  mailbox driver. The CMDQ is used to help read/write registers with
+	  critical time limitation, such as updating display configuration
+	  during the vblank.
 endif
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index 4896f8d..484d341 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -36,3 +36,5 @@ obj-$(CONFIG_BCM_FLEXRM_MBOX)	+= bcm-flexrm-mailbox.o
 obj-$(CONFIG_QCOM_APCS_IPC)	+= qcom-apcs-ipc-mailbox.o
 
 obj-$(CONFIG_TEGRA_HSP_MBOX)	+= tegra-hsp.o
+
+obj-$(CONFIG_MTK_CMDQ_MBOX)	+= mtk-cmdq-mailbox.o
diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
new file mode 100644
index 0000000..394a335
--- /dev/null
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -0,0 +1,594 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_controller.h>
+#include <linux/mailbox/mtk-cmdq-mailbox.h>
+#include <linux/timer.h>
+
+#define CMDQ_THR_MAX_COUNT		16
+#define CMDQ_OP_CODE_MASK		(0xff << CMDQ_OP_CODE_SHIFT)
+#define CMDQ_TIMEOUT_MS			1000
+#define CMDQ_IRQ_MASK			0xffff
+#define CMDQ_NUM_CMD(t)			(t->cmd_buf_size / CMDQ_INST_SIZE)
+
+#define CMDQ_CURR_IRQ_STATUS		0x10
+#define CMDQ_THR_SLOT_CYCLES		0x30
+
+#define CMDQ_THR_BASE			0x100
+#define CMDQ_THR_SIZE			0x80
+#define CMDQ_THR_WARM_RESET		0x00
+#define CMDQ_THR_ENABLE_TASK		0x04
+#define CMDQ_THR_SUSPEND_TASK		0x08
+#define CMDQ_THR_CURR_STATUS		0x0c
+#define CMDQ_THR_IRQ_STATUS		0x10
+#define CMDQ_THR_IRQ_ENABLE		0x14
+#define CMDQ_THR_CURR_ADDR		0x20
+#define CMDQ_THR_END_ADDR		0x24
+#define CMDQ_THR_WAIT_TOKEN		0x30
+
+#define CMDQ_THR_ENABLED		0x1
+#define CMDQ_THR_DISABLED		0x0
+#define CMDQ_THR_SUSPEND		0x1
+#define CMDQ_THR_RESUME			0x0
+#define CMDQ_THR_STATUS_SUSPENDED	BIT(1)
+#define CMDQ_THR_DO_WARM_RESET		BIT(0)
+#define CMDQ_THR_ACTIVE_SLOT_CYCLES	0x3200
+#define CMDQ_THR_IRQ_DONE		0x1
+#define CMDQ_THR_IRQ_ERROR		0x12
+#define CMDQ_THR_IRQ_EN			(CMDQ_THR_IRQ_ERROR | CMDQ_THR_IRQ_DONE)
+#define CMDQ_THR_IS_WAITING		BIT(31)
+
+#define CMDQ_JUMP_BY_OFFSET		0x10000000
+#define CMDQ_JUMP_BY_PA			0x10000001
+
+struct cmdq_thread {
+	struct mbox_chan	*chan;
+	void __iomem		*base;
+	struct list_head	task_busy_list;
+	struct timer_list	timeout;
+	bool			atomic_exec;
+};
+
+struct cmdq_task {
+	struct cmdq		*cmdq;
+	struct list_head	list_entry;
+	dma_addr_t		pa_base;
+	struct cmdq_thread	*thread;
+	struct cmdq_pkt		*pkt; /* the packet sent from mailbox client */
+};
+
+struct cmdq {
+	struct mbox_controller	mbox;
+	void __iomem		*base;
+	u32			irq;
+	struct cmdq_thread	thread[CMDQ_THR_MAX_COUNT];
+	struct clk		*clock;
+	bool			suspended;
+};
+
+static int cmdq_thread_suspend(struct cmdq *cmdq, struct cmdq_thread *thread)
+{
+	u32 status;
+
+	writel(CMDQ_THR_SUSPEND, thread->base + CMDQ_THR_SUSPEND_TASK);
+
+	/* If already disabled, treat as suspended successful. */
+	if (!(readl(thread->base + CMDQ_THR_ENABLE_TASK) & CMDQ_THR_ENABLED))
+		return 0;
+
+	if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_CURR_STATUS,
+			status, status & CMDQ_THR_STATUS_SUSPENDED, 0, 10)) {
+		dev_err(cmdq->mbox.dev, "suspend GCE thread 0x%x failed\n",
+			(u32)(thread->base - cmdq->base));
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static void cmdq_thread_resume(struct cmdq_thread *thread)
+{
+	writel(CMDQ_THR_RESUME, thread->base + CMDQ_THR_SUSPEND_TASK);
+}
+
+static int cmdq_thread_reset(struct cmdq *cmdq, struct cmdq_thread *thread)
+{
+	u32 warm_reset;
+
+	writel(CMDQ_THR_DO_WARM_RESET, thread->base + CMDQ_THR_WARM_RESET);
+	if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_WARM_RESET,
+			warm_reset, !(warm_reset & CMDQ_THR_DO_WARM_RESET),
+			0, 10)) {
+		dev_err(cmdq->mbox.dev, "reset GCE thread 0x%x failed\n",
+			(u32)(thread->base - cmdq->base));
+		return -EFAULT;
+	}
+	writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
+	return 0;
+}
+
+static void cmdq_thread_disable(struct cmdq *cmdq, struct cmdq_thread *thread)
+{
+	cmdq_thread_reset(cmdq, thread);
+	writel(CMDQ_THR_DISABLED, thread->base + CMDQ_THR_ENABLE_TASK);
+}
+
+/* notify GCE to re-fetch commands by setting GCE thread PC */
+static void cmdq_thread_invalidate_fetched_data(struct cmdq_thread *thread)
+{
+	writel(readl(thread->base + CMDQ_THR_CURR_ADDR),
+	       thread->base + CMDQ_THR_CURR_ADDR);
+}
+
+static void cmdq_task_insert_into_thread(struct cmdq_task *task)
+{
+	struct device *dev = task->cmdq->mbox.dev;
+	struct cmdq_thread *thread = task->thread;
+	struct cmdq_task *prev_task = list_last_entry(
+			&thread->task_busy_list, typeof(*task), list_entry);
+	u64 *prev_task_base = prev_task->pkt->va_base;
+
+	/* let previous task jump to this task */
+	dma_sync_single_for_cpu(dev, prev_task->pa_base,
+				prev_task->pkt->cmd_buf_size, DMA_TO_DEVICE);
+	prev_task_base[CMDQ_NUM_CMD(prev_task->pkt) - 1] =
+		(u64)CMDQ_JUMP_BY_PA << 32 | task->pa_base;
+	dma_sync_single_for_device(dev, prev_task->pa_base,
+				   prev_task->pkt->cmd_buf_size, DMA_TO_DEVICE);
+
+	cmdq_thread_invalidate_fetched_data(thread);
+}
+
+static bool cmdq_command_is_wfe(u64 cmd)
+{
+	u64 wfe_option = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
+	u64 wfe_op = (u64)(CMDQ_CODE_WFE << CMDQ_OP_CODE_SHIFT) << 32;
+	u64 wfe_mask = (u64)CMDQ_OP_CODE_MASK << 32 | 0xffffffff;
+
+	return ((cmd & wfe_mask) == (wfe_op | wfe_option));
+}
+
+/* we assume tasks in the same display GCE thread are waiting the same event. */
+static void cmdq_task_remove_wfe(struct cmdq_task *task)
+{
+	struct device *dev = task->cmdq->mbox.dev;
+	u64 *base = task->pkt->va_base;
+	int i;
+
+	dma_sync_single_for_cpu(dev, task->pa_base, task->pkt->cmd_buf_size,
+				DMA_TO_DEVICE);
+	for (i = 0; i < CMDQ_NUM_CMD(task->pkt); i++)
+		if (cmdq_command_is_wfe(base[i]))
+			base[i] = (u64)CMDQ_JUMP_BY_OFFSET << 32 |
+				  CMDQ_JUMP_PASS;
+	dma_sync_single_for_device(dev, task->pa_base, task->pkt->cmd_buf_size,
+				   DMA_TO_DEVICE);
+}
+
+static bool cmdq_thread_is_in_wfe(struct cmdq_thread *thread)
+{
+	return readl(thread->base + CMDQ_THR_WAIT_TOKEN) & CMDQ_THR_IS_WAITING;
+}
+
+static void cmdq_thread_wait_end(struct cmdq_thread *thread,
+				 unsigned long end_pa)
+{
+	struct device *dev = thread->chan->mbox->dev;
+	unsigned long curr_pa;
+
+	if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_CURR_ADDR,
+			curr_pa, curr_pa == end_pa, 1, 20))
+		dev_err(dev, "GCE thread cannot run to end.\n");
+}
+
+static void cmdq_task_exec(struct cmdq_pkt *pkt, struct cmdq_thread *thread)
+{
+	struct cmdq *cmdq;
+	struct cmdq_task *task;
+	unsigned long curr_pa, end_pa;
+
+	cmdq = dev_get_drvdata(thread->chan->mbox->dev);
+
+	/* Client should not flush new tasks if suspended. */
+	WARN_ON(cmdq->suspended);
+
+	task = kzalloc(sizeof(*task), GFP_ATOMIC);
+	task->cmdq = cmdq;
+	INIT_LIST_HEAD(&task->list_entry);
+	task->pa_base = pkt->pa_base;
+	task->thread = thread;
+	task->pkt = pkt;
+
+	if (list_empty(&thread->task_busy_list)) {
+		WARN_ON(clk_enable(cmdq->clock) < 0);
+		WARN_ON(cmdq_thread_reset(cmdq, thread) < 0);
+
+		writel(task->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
+		writel(task->pa_base + pkt->cmd_buf_size,
+		       thread->base + CMDQ_THR_END_ADDR);
+		writel(CMDQ_THR_IRQ_EN, thread->base + CMDQ_THR_IRQ_ENABLE);
+		writel(CMDQ_THR_ENABLED, thread->base + CMDQ_THR_ENABLE_TASK);
+
+		mod_timer(&thread->timeout,
+			  jiffies + msecs_to_jiffies(CMDQ_TIMEOUT_MS));
+	} else {
+		WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
+		curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR);
+		end_pa = readl(thread->base + CMDQ_THR_END_ADDR);
+
+		/*
+		 * Atomic execution should remove the following wfe, i.e. only
+		 * wait event at first task, and prevent to pause when running.
+		 */
+		if (thread->atomic_exec) {
+			/* GCE is executing if command is not WFE */
+			if (!cmdq_thread_is_in_wfe(thread)) {
+				cmdq_thread_resume(thread);
+				cmdq_thread_wait_end(thread, end_pa);
+				WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
+				/* set to this task directly */
+				writel(task->pa_base,
+				       thread->base + CMDQ_THR_CURR_ADDR);
+			} else {
+				cmdq_task_insert_into_thread(task);
+				cmdq_task_remove_wfe(task);
+				smp_mb(); /* modify jump before enable thread */
+			}
+		} else {
+			/* check boundary */
+			if (curr_pa == end_pa - CMDQ_INST_SIZE ||
+			    curr_pa == end_pa) {
+				/* set to this task directly */
+				writel(task->pa_base,
+				       thread->base + CMDQ_THR_CURR_ADDR);
+			} else {
+				cmdq_task_insert_into_thread(task);
+				smp_mb(); /* modify jump before enable thread */
+			}
+		}
+		writel(task->pa_base + pkt->cmd_buf_size,
+		       thread->base + CMDQ_THR_END_ADDR);
+		cmdq_thread_resume(thread);
+	}
+	list_move_tail(&task->list_entry, &thread->task_busy_list);
+}
+
+static void cmdq_task_exec_done(struct cmdq_task *task, bool err)
+{
+	struct device *dev = task->cmdq->mbox.dev;
+	struct cmdq_cb_data cmdq_cb_data;
+
+	dma_unmap_single(dev, task->pa_base, task->pkt->cmd_buf_size,
+			 DMA_TO_DEVICE);
+	if (task->pkt->cb.cb) {
+		cmdq_cb_data.err = err;
+		cmdq_cb_data.data = task->pkt->cb.data;
+		task->pkt->cb.cb(cmdq_cb_data);
+	}
+	list_del(&task->list_entry);
+}
+
+static void cmdq_task_handle_error(struct cmdq_task *task)
+{
+	struct cmdq_thread *thread = task->thread;
+	struct cmdq_task *next_task;
+
+	dev_err(task->cmdq->mbox.dev, "task 0x%p error\n", task);
+	WARN_ON(cmdq_thread_suspend(task->cmdq, thread) < 0);
+	next_task = list_first_entry_or_null(&thread->task_busy_list,
+			struct cmdq_task, list_entry);
+	if (next_task)
+		writel(next_task->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
+	cmdq_thread_resume(thread);
+}
+
+static void cmdq_thread_irq_handler(struct cmdq *cmdq,
+				    struct cmdq_thread *thread)
+{
+	struct cmdq_task *task, *tmp, *curr_task = NULL;
+	u32 curr_pa, irq_flag, task_end_pa;
+	bool err;
+
+	irq_flag = readl(thread->base + CMDQ_THR_IRQ_STATUS);
+	writel(~irq_flag, thread->base + CMDQ_THR_IRQ_STATUS);
+
+	/*
+	 * When ISR call this function, another CPU core could run
+	 * "release task" right before we acquire the spin lock, and thus
+	 * reset / disable this GCE thread, so we need to check the enable
+	 * bit of this GCE thread.
+	 */
+	if (!(readl(thread->base + CMDQ_THR_ENABLE_TASK) & CMDQ_THR_ENABLED))
+		return;
+
+	if (irq_flag & CMDQ_THR_IRQ_ERROR)
+		err = true;
+	else if (irq_flag & CMDQ_THR_IRQ_DONE)
+		err = false;
+	else
+		return;
+
+	curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR);
+
+	list_for_each_entry_safe(task, tmp, &thread->task_busy_list,
+				 list_entry) {
+		task_end_pa = task->pa_base + task->pkt->cmd_buf_size;
+		if (curr_pa >= task->pa_base && curr_pa < task_end_pa)
+			curr_task = task;
+
+		if (!curr_task || curr_pa == task_end_pa - CMDQ_INST_SIZE) {
+			cmdq_task_exec_done(task, false);
+			kfree(task);
+		} else if (err) {
+			cmdq_task_exec_done(task, true);
+			cmdq_task_handle_error(curr_task);
+			kfree(task);
+		}
+
+		if (curr_task)
+			break;
+	}
+
+	if (list_empty(&thread->task_busy_list)) {
+		cmdq_thread_disable(cmdq, thread);
+		clk_disable(cmdq->clock);
+	} else {
+		mod_timer(&thread->timeout,
+			  jiffies + msecs_to_jiffies(CMDQ_TIMEOUT_MS));
+	}
+}
+
+static irqreturn_t cmdq_irq_handler(int irq, void *dev)
+{
+	struct cmdq *cmdq = dev;
+	unsigned long irq_status, flags = 0L;
+	int bit;
+
+	irq_status = readl(cmdq->base + CMDQ_CURR_IRQ_STATUS) & CMDQ_IRQ_MASK;
+	if (!(irq_status ^ CMDQ_IRQ_MASK))
+		return IRQ_NONE;
+
+	for_each_clear_bit(bit, &irq_status, fls(CMDQ_IRQ_MASK)) {
+		struct cmdq_thread *thread = &cmdq->thread[bit];
+
+		spin_lock_irqsave(&thread->chan->lock, flags);
+		cmdq_thread_irq_handler(cmdq, thread);
+		spin_unlock_irqrestore(&thread->chan->lock, flags);
+	}
+	return IRQ_HANDLED;
+}
+
+static void cmdq_thread_handle_timeout(struct timer_list *t)
+{
+	struct cmdq_thread *thread = from_timer(thread, t, timeout);
+	struct cmdq *cmdq = container_of(thread->chan->mbox, struct cmdq, mbox);
+	struct cmdq_task *task, *tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&thread->chan->lock, flags);
+	WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
+
+	/*
+	 * Although IRQ is disabled, GCE continues to execute.
+	 * It may have pending IRQ before GCE thread is suspended,
+	 * so check this condition again.
+	 */
+	cmdq_thread_irq_handler(cmdq, thread);
+
+	if (list_empty(&thread->task_busy_list)) {
+		cmdq_thread_resume(thread);
+		spin_unlock_irqrestore(&thread->chan->lock, flags);
+		return;
+	}
+
+	dev_err(cmdq->mbox.dev, "timeout\n");
+	list_for_each_entry_safe(task, tmp, &thread->task_busy_list,
+				 list_entry) {
+		cmdq_task_exec_done(task, true);
+		kfree(task);
+	}
+
+	cmdq_thread_resume(thread);
+	cmdq_thread_disable(cmdq, thread);
+	clk_disable(cmdq->clock);
+	spin_unlock_irqrestore(&thread->chan->lock, flags);
+}
+
+static int cmdq_suspend(struct device *dev)
+{
+	struct cmdq *cmdq = dev_get_drvdata(dev);
+	struct cmdq_thread *thread;
+	int i;
+	bool task_running = false;
+
+	cmdq->suspended = true;
+
+	for (i = 0; i < ARRAY_SIZE(cmdq->thread); i++) {
+		thread = &cmdq->thread[i];
+		if (!list_empty(&thread->task_busy_list)) {
+			task_running = true;
+			break;
+		}
+	}
+
+	if (task_running)
+		dev_warn(dev, "exist running task(s) in suspend\n");
+
+	clk_unprepare(cmdq->clock);
+	return 0;
+}
+
+static int cmdq_resume(struct device *dev)
+{
+	struct cmdq *cmdq = dev_get_drvdata(dev);
+
+	WARN_ON(clk_prepare(cmdq->clock) < 0);
+	cmdq->suspended = false;
+	return 0;
+}
+
+static int cmdq_remove(struct platform_device *pdev)
+{
+	struct cmdq *cmdq = platform_get_drvdata(pdev);
+
+	mbox_controller_unregister(&cmdq->mbox);
+	clk_unprepare(cmdq->clock);
+	return 0;
+}
+
+static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
+{
+	cmdq_task_exec(data, chan->con_priv);
+	return 0;
+}
+
+static int cmdq_mbox_startup(struct mbox_chan *chan)
+{
+	return 0;
+}
+
+static void cmdq_mbox_shutdown(struct mbox_chan *chan)
+{
+}
+
+static bool cmdq_mbox_last_tx_done(struct mbox_chan *chan)
+{
+	return true;
+}
+
+static const struct mbox_chan_ops cmdq_mbox_chan_ops = {
+	.send_data = cmdq_mbox_send_data,
+	.startup = cmdq_mbox_startup,
+	.shutdown = cmdq_mbox_shutdown,
+	.last_tx_done = cmdq_mbox_last_tx_done,
+};
+
+static struct mbox_chan *cmdq_xlate(struct mbox_controller *mbox,
+		const struct of_phandle_args *sp)
+{
+	int ind = sp->args[0];
+	struct cmdq_thread *thread;
+
+	if (ind >= mbox->num_chans)
+		return ERR_PTR(-EINVAL);
+
+	thread = mbox->chans[ind].con_priv;
+	thread->atomic_exec = (sp->args[1] != 0);
+	thread->chan = &mbox->chans[ind];
+
+	return &mbox->chans[ind];
+}
+
+static int cmdq_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct cmdq *cmdq;
+	int err, i;
+
+	cmdq = devm_kzalloc(dev, sizeof(*cmdq), GFP_KERNEL);
+	if (!cmdq)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	cmdq->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(cmdq->base)) {
+		dev_err(dev, "failed to ioremap gce\n");
+		return PTR_ERR(cmdq->base);
+	}
+
+	cmdq->irq = platform_get_irq(pdev, 0);
+	if (!cmdq->irq) {
+		dev_err(dev, "failed to get irq\n");
+		return -EINVAL;
+	}
+	err = devm_request_irq(dev, cmdq->irq, cmdq_irq_handler, IRQF_SHARED,
+			       "mtk_cmdq", cmdq);
+	if (err < 0) {
+		dev_err(dev, "failed to register ISR (%d)\n", err);
+		return err;
+	}
+
+	dev_dbg(dev, "cmdq device: addr:0x%p, va:0x%p, irq:%d\n",
+		dev, cmdq->base, cmdq->irq);
+
+	cmdq->clock = devm_clk_get(dev, "gce");
+	if (IS_ERR(cmdq->clock)) {
+		dev_err(dev, "failed to get gce clk\n");
+		return PTR_ERR(cmdq->clock);
+	}
+
+	cmdq->mbox.dev = dev;
+	cmdq->mbox.chans = devm_kcalloc(dev, CMDQ_THR_MAX_COUNT,
+					sizeof(*cmdq->mbox.chans), GFP_KERNEL);
+	if (!cmdq->mbox.chans)
+		return -ENOMEM;
+
+	cmdq->mbox.num_chans = CMDQ_THR_MAX_COUNT;
+	cmdq->mbox.ops = &cmdq_mbox_chan_ops;
+	cmdq->mbox.of_xlate = cmdq_xlate;
+
+	/* make use of TXDONE_BY_ACK */
+	cmdq->mbox.txdone_irq = false;
+	cmdq->mbox.txdone_poll = false;
+
+	for (i = 0; i < ARRAY_SIZE(cmdq->thread); i++) {
+		cmdq->thread[i].base = cmdq->base + CMDQ_THR_BASE +
+				CMDQ_THR_SIZE * i;
+		INIT_LIST_HEAD(&cmdq->thread[i].task_busy_list);
+		timer_setup(&cmdq->thread[i].timeout,
+				cmdq_thread_handle_timeout, 0);
+		cmdq->mbox.chans[i].con_priv = &cmdq->thread[i];
+	}
+
+	err = mbox_controller_register(&cmdq->mbox);
+	if (err < 0) {
+		dev_err(dev, "failed to register mailbox: %d\n", err);
+		return err;
+	}
+
+	platform_set_drvdata(pdev, cmdq);
+	WARN_ON(clk_prepare(cmdq->clock) < 0);
+
+	return 0;
+}
+
+static const struct dev_pm_ops cmdq_pm_ops = {
+	.suspend = cmdq_suspend,
+	.resume = cmdq_resume,
+};
+
+static const struct of_device_id cmdq_of_ids[] = {
+	{.compatible = "mediatek,mt8173-gce",},
+	{}
+};
+
+static struct platform_driver cmdq_drv = {
+	.probe = cmdq_probe,
+	.remove = cmdq_remove,
+	.driver = {
+		.name = "mtk_cmdq",
+		.pm = &cmdq_pm_ops,
+		.of_match_table = cmdq_of_ids,
+	}
+};
+
+builtin_platform_driver(cmdq_drv);
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
new file mode 100644
index 0000000..c463f2f
--- /dev/null
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MTK_CMDQ_MAILBOX_H__
+#define __MTK_CMDQ_MAILBOX_H__
+
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define CMDQ_INST_SIZE			8 /* instruction is 64-bit */
+#define CMDQ_SUBSYS_SHIFT		16
+#define CMDQ_OP_CODE_SHIFT		24
+#define CMDQ_JUMP_PASS			CMDQ_INST_SIZE
+
+#define CMDQ_WFE_UPDATE			BIT(31)
+#define CMDQ_WFE_WAIT			BIT(15)
+#define CMDQ_WFE_WAIT_VALUE		0x1
+
+/*
+ * CMDQ_CODE_MASK:
+ *   set write mask
+ *   format: op mask
+ * CMDQ_CODE_WRITE:
+ *   write value into target register
+ *   format: op subsys address value
+ * CMDQ_CODE_JUMP:
+ *   jump by offset
+ *   format: op offset
+ * CMDQ_CODE_WFE:
+ *   wait for event and clear
+ *   it is just clear if no wait
+ *   format: [wait]  op event update:1 to_wait:1 wait:1
+ *           [clear] op event update:1 to_wait:0 wait:0
+ * CMDQ_CODE_EOC:
+ *   end of command
+ *   format: op irq_flag
+ */
+enum cmdq_code {
+	CMDQ_CODE_MASK = 0x02,
+	CMDQ_CODE_WRITE = 0x04,
+	CMDQ_CODE_JUMP = 0x10,
+	CMDQ_CODE_WFE = 0x20,
+	CMDQ_CODE_EOC = 0x40,
+};
+
+struct cmdq_cb_data {
+	bool	err;
+	void	*data;
+};
+
+typedef void (*cmdq_async_flush_cb)(struct cmdq_cb_data data);
+
+struct cmdq_task_cb {
+	cmdq_async_flush_cb	cb;
+	void			*data;
+};
+
+struct cmdq_pkt {
+	void			*va_base;
+	dma_addr_t		pa_base;
+	size_t			cmd_buf_size; /* command occupied size */
+	size_t			buf_size; /* real buffer size */
+	struct cmdq_task_cb	cb;
+};
+
+#endif /* __MTK_CMDQ_MAILBOX_H__ */
-- 
1.7.9.5

[PATCH v21 2/4] mailbox: mediatek: Add Mediatek CMDQ driver

[CK Hu]

Hi, Houlong:

I've one inline comment.

On Wed, 2018-01-31 at 15:28 +0800, houlong.wei at mediatek.com wrote:
> From: "hs.liao at mediatek.com" <hs.liao@mediatek.com>
> 
> This patch is first version of Mediatek Command Queue(CMDQ) driver. The
> CMDQ is used to help write registers with critical time limitation,
> such as updating display configuration during the vblank. It controls
> Global Command Engine (GCE) hardware to achieve this requirement.
> Currently, CMDQ only supports display related hardwares, but we expect
> it can be extended to other hardwares for future requirements.
> 
> Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
> Signed-off-by: HS Liao <hs.liao@mediatek.com>
> Signed-off-by: CK Hu <ck.hu@mediatek.com>
> ---
>  drivers/mailbox/Kconfig                  |   10 +
>  drivers/mailbox/Makefile                 |    2 +
>  drivers/mailbox/mtk-cmdq-mailbox.c       |  594 ++++++++++++++++++++++++++++++
>  include/linux/mailbox/mtk-cmdq-mailbox.h |   77 ++++
>  4 files changed, 683 insertions(+)
>  create mode 100644 drivers/mailbox/mtk-cmdq-mailbox.c
>  create mode 100644 include/linux/mailbox/mtk-cmdq-mailbox.h
> 
> diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
> index ba2f152..43bb26f 100644
> --- a/drivers/mailbox/Kconfig
> +++ b/drivers/mailbox/Kconfig
> @@ -171,4 +171,14 @@ config BCM_FLEXRM_MBOX
>  	  Mailbox implementation of the Broadcom FlexRM ring manager,
>  	  which provides access to various offload engines on Broadcom
>  	  SoCs. Say Y here if you want to use the Broadcom FlexRM.
> +
> +config MTK_CMDQ_MBOX
> +	bool "MediaTek CMDQ Mailbox Support"
> +	depends on ARM64 && ( ARCH_MEDIATEK || COMPILE_TEST )
> +	select MTK_INFRACFG
> +	help
> +	  Say yes here to add support for the MediaTek Command Queue (CMDQ)
> +	  mailbox driver. The CMDQ is used to help read/write registers with
> +	  critical time limitation, such as updating display configuration
> +	  during the vblank.
>  endif
> diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
> index 4896f8d..484d341 100644
> --- a/drivers/mailbox/Makefile
> +++ b/drivers/mailbox/Makefile
> @@ -36,3 +36,5 @@ obj-$(CONFIG_BCM_FLEXRM_MBOX)	+= bcm-flexrm-mailbox.o
>  obj-$(CONFIG_QCOM_APCS_IPC)	+= qcom-apcs-ipc-mailbox.o
>  
>  obj-$(CONFIG_TEGRA_HSP_MBOX)	+= tegra-hsp.o
> +
> +obj-$(CONFIG_MTK_CMDQ_MBOX)	+= mtk-cmdq-mailbox.o
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> new file mode 100644
> index 0000000..394a335
> --- /dev/null
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -0,0 +1,594 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/errno.h>
> +#include <linux/interrupt.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/mailbox_controller.h>
> +#include <linux/mailbox/mtk-cmdq-mailbox.h>
> +#include <linux/timer.h>
> +
> +#define CMDQ_THR_MAX_COUNT		16
> +#define CMDQ_OP_CODE_MASK		(0xff << CMDQ_OP_CODE_SHIFT)
> +#define CMDQ_TIMEOUT_MS			1000
> +#define CMDQ_IRQ_MASK			0xffff
> +#define CMDQ_NUM_CMD(t)			(t->cmd_buf_size / CMDQ_INST_SIZE)
> +
> +#define CMDQ_CURR_IRQ_STATUS		0x10
> +#define CMDQ_THR_SLOT_CYCLES		0x30
> +
> +#define CMDQ_THR_BASE			0x100
> +#define CMDQ_THR_SIZE			0x80
> +#define CMDQ_THR_WARM_RESET		0x00
> +#define CMDQ_THR_ENABLE_TASK		0x04
> +#define CMDQ_THR_SUSPEND_TASK		0x08
> +#define CMDQ_THR_CURR_STATUS		0x0c
> +#define CMDQ_THR_IRQ_STATUS		0x10
> +#define CMDQ_THR_IRQ_ENABLE		0x14
> +#define CMDQ_THR_CURR_ADDR		0x20
> +#define CMDQ_THR_END_ADDR		0x24
> +#define CMDQ_THR_WAIT_TOKEN		0x30
> +
> +#define CMDQ_THR_ENABLED		0x1
> +#define CMDQ_THR_DISABLED		0x0
> +#define CMDQ_THR_SUSPEND		0x1
> +#define CMDQ_THR_RESUME			0x0
> +#define CMDQ_THR_STATUS_SUSPENDED	BIT(1)
> +#define CMDQ_THR_DO_WARM_RESET		BIT(0)
> +#define CMDQ_THR_ACTIVE_SLOT_CYCLES	0x3200
> +#define CMDQ_THR_IRQ_DONE		0x1
> +#define CMDQ_THR_IRQ_ERROR		0x12
> +#define CMDQ_THR_IRQ_EN			(CMDQ_THR_IRQ_ERROR | CMDQ_THR_IRQ_DONE)
> +#define CMDQ_THR_IS_WAITING		BIT(31)
> +
> +#define CMDQ_JUMP_BY_OFFSET		0x10000000
> +#define CMDQ_JUMP_BY_PA			0x10000001
> +
> +struct cmdq_thread {
> +	struct mbox_chan	*chan;
> +	void __iomem		*base;
> +	struct list_head	task_busy_list;
> +	struct timer_list	timeout;
> +	bool			atomic_exec;
> +};
> +
> +struct cmdq_task {
> +	struct cmdq		*cmdq;
> +	struct list_head	list_entry;
> +	dma_addr_t		pa_base;
> +	struct cmdq_thread	*thread;
> +	struct cmdq_pkt		*pkt; /* the packet sent from mailbox client */
> +};
> +
> +struct cmdq {
> +	struct mbox_controller	mbox;
> +	void __iomem		*base;
> +	u32			irq;
> +	struct cmdq_thread	thread[CMDQ_THR_MAX_COUNT];
> +	struct clk		*clock;
> +	bool			suspended;
> +};
> +
> +static int cmdq_thread_suspend(struct cmdq *cmdq, struct cmdq_thread *thread)
> +{
> +	u32 status;
> +
> +	writel(CMDQ_THR_SUSPEND, thread->base + CMDQ_THR_SUSPEND_TASK);
> +
> +	/* If already disabled, treat as suspended successful. */
> +	if (!(readl(thread->base + CMDQ_THR_ENABLE_TASK) & CMDQ_THR_ENABLED))
> +		return 0;
> +
> +	if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_CURR_STATUS,
> +			status, status & CMDQ_THR_STATUS_SUSPENDED, 0, 10)) {
> +		dev_err(cmdq->mbox.dev, "suspend GCE thread 0x%x failed\n",
> +			(u32)(thread->base - cmdq->base));
> +		return -EFAULT;
> +	}
> +
> +	return 0;
> +}
> +
> +static void cmdq_thread_resume(struct cmdq_thread *thread)
> +{
> +	writel(CMDQ_THR_RESUME, thread->base + CMDQ_THR_SUSPEND_TASK);
> +}
> +
> +static int cmdq_thread_reset(struct cmdq *cmdq, struct cmdq_thread *thread)
> +{
> +	u32 warm_reset;
> +
> +	writel(CMDQ_THR_DO_WARM_RESET, thread->base + CMDQ_THR_WARM_RESET);
> +	if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_WARM_RESET,
> +			warm_reset, !(warm_reset & CMDQ_THR_DO_WARM_RESET),
> +			0, 10)) {
> +		dev_err(cmdq->mbox.dev, "reset GCE thread 0x%x failed\n",
> +			(u32)(thread->base - cmdq->base));
> +		return -EFAULT;
> +	}
> +	writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
> +	return 0;
> +}
> +
> +static void cmdq_thread_disable(struct cmdq *cmdq, struct cmdq_thread *thread)
> +{
> +	cmdq_thread_reset(cmdq, thread);
> +	writel(CMDQ_THR_DISABLED, thread->base + CMDQ_THR_ENABLE_TASK);
> +}
> +
> +/* notify GCE to re-fetch commands by setting GCE thread PC */
> +static void cmdq_thread_invalidate_fetched_data(struct cmdq_thread *thread)
> +{
> +	writel(readl(thread->base + CMDQ_THR_CURR_ADDR),
> +	       thread->base + CMDQ_THR_CURR_ADDR);
> +}
> +
> +static void cmdq_task_insert_into_thread(struct cmdq_task *task)
> +{
> +	struct device *dev = task->cmdq->mbox.dev;
> +	struct cmdq_thread *thread = task->thread;
> +	struct cmdq_task *prev_task = list_last_entry(
> +			&thread->task_busy_list, typeof(*task), list_entry);
> +	u64 *prev_task_base = prev_task->pkt->va_base;
> +
> +	/* let previous task jump to this task */
> +	dma_sync_single_for_cpu(dev, prev_task->pa_base,
> +				prev_task->pkt->cmd_buf_size, DMA_TO_DEVICE);
> +	prev_task_base[CMDQ_NUM_CMD(prev_task->pkt) - 1] =
> +		(u64)CMDQ_JUMP_BY_PA << 32 | task->pa_base;
> +	dma_sync_single_for_device(dev, prev_task->pa_base,
> +				   prev_task->pkt->cmd_buf_size, DMA_TO_DEVICE);
> +
> +	cmdq_thread_invalidate_fetched_data(thread);
> +}
> +
> +static bool cmdq_command_is_wfe(u64 cmd)
> +{
> +	u64 wfe_option = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
> +	u64 wfe_op = (u64)(CMDQ_CODE_WFE << CMDQ_OP_CODE_SHIFT) << 32;
> +	u64 wfe_mask = (u64)CMDQ_OP_CODE_MASK << 32 | 0xffffffff;
> +
> +	return ((cmd & wfe_mask) == (wfe_op | wfe_option));
> +}
> +
> +/* we assume tasks in the same display GCE thread are waiting the same event. */
> +static void cmdq_task_remove_wfe(struct cmdq_task *task)
> +{
> +	struct device *dev = task->cmdq->mbox.dev;
> +	u64 *base = task->pkt->va_base;
> +	int i;
> +
> +	dma_sync_single_for_cpu(dev, task->pa_base, task->pkt->cmd_buf_size,
> +				DMA_TO_DEVICE);
> +	for (i = 0; i < CMDQ_NUM_CMD(task->pkt); i++)
> +		if (cmdq_command_is_wfe(base[i]))
> +			base[i] = (u64)CMDQ_JUMP_BY_OFFSET << 32 |
> +				  CMDQ_JUMP_PASS;
> +	dma_sync_single_for_device(dev, task->pa_base, task->pkt->cmd_buf_size,
> +				   DMA_TO_DEVICE);
> +}
> +
> +static bool cmdq_thread_is_in_wfe(struct cmdq_thread *thread)
> +{
> +	return readl(thread->base + CMDQ_THR_WAIT_TOKEN) & CMDQ_THR_IS_WAITING;
> +}
> +
> +static void cmdq_thread_wait_end(struct cmdq_thread *thread,
> +				 unsigned long end_pa)
> +{
> +	struct device *dev = thread->chan->mbox->dev;
> +	unsigned long curr_pa;
> +
> +	if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_CURR_ADDR,
> +			curr_pa, curr_pa == end_pa, 1, 20))
> +		dev_err(dev, "GCE thread cannot run to end.\n");
> +}
> +
> +static void cmdq_task_exec(struct cmdq_pkt *pkt, struct cmdq_thread *thread)
> +{
> +	struct cmdq *cmdq;
> +	struct cmdq_task *task;
> +	unsigned long curr_pa, end_pa;
> +
> +	cmdq = dev_get_drvdata(thread->chan->mbox->dev);
> +
> +	/* Client should not flush new tasks if suspended. */
> +	WARN_ON(cmdq->suspended);
> +
> +	task = kzalloc(sizeof(*task), GFP_ATOMIC);
> +	task->cmdq = cmdq;
> +	INIT_LIST_HEAD(&task->list_entry);
> +	task->pa_base = pkt->pa_base;
> +	task->thread = thread;
> +	task->pkt = pkt;
> +
> +	if (list_empty(&thread->task_busy_list)) {
> +		WARN_ON(clk_enable(cmdq->clock) < 0);
> +		WARN_ON(cmdq_thread_reset(cmdq, thread) < 0);
> +
> +		writel(task->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
> +		writel(task->pa_base + pkt->cmd_buf_size,
> +		       thread->base + CMDQ_THR_END_ADDR);
> +		writel(CMDQ_THR_IRQ_EN, thread->base + CMDQ_THR_IRQ_ENABLE);
> +		writel(CMDQ_THR_ENABLED, thread->base + CMDQ_THR_ENABLE_TASK);
> +
> +		mod_timer(&thread->timeout,
> +			  jiffies + msecs_to_jiffies(CMDQ_TIMEOUT_MS));
> +	} else {
> +		WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
> +		curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR);
> +		end_pa = readl(thread->base + CMDQ_THR_END_ADDR);
> +
> +		/*
> +		 * Atomic execution should remove the following wfe, i.e. only
> +		 * wait event at first task, and prevent to pause when running.
> +		 */
> +		if (thread->atomic_exec) {
> +			/* GCE is executing if command is not WFE */
> +			if (!cmdq_thread_is_in_wfe(thread)) {
> +				cmdq_thread_resume(thread);
> +				cmdq_thread_wait_end(thread, end_pa);
> +				WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
> +				/* set to this task directly */
> +				writel(task->pa_base,
> +				       thread->base + CMDQ_THR_CURR_ADDR);
> +			} else {
> +				cmdq_task_insert_into_thread(task);
> +				cmdq_task_remove_wfe(task);
> +				smp_mb(); /* modify jump before enable thread */
> +			}
> +		} else {
> +			/* check boundary */
> +			if (curr_pa == end_pa - CMDQ_INST_SIZE ||
> +			    curr_pa == end_pa) {
> +				/* set to this task directly */
> +				writel(task->pa_base,
> +				       thread->base + CMDQ_THR_CURR_ADDR);
> +			} else {
> +				cmdq_task_insert_into_thread(task);
> +				smp_mb(); /* modify jump before enable thread */
> +			}
> +		}
> +		writel(task->pa_base + pkt->cmd_buf_size,
> +		       thread->base + CMDQ_THR_END_ADDR);
> +		cmdq_thread_resume(thread);
> +	}
> +	list_move_tail(&task->list_entry, &thread->task_busy_list);

You implement a list to queue command because you need to execute
multiple packet in the same vblank period. I've a suggestion that you
need not to implement a list. Once cmdq driver receive two packet as
below:

Packet 1:
(1) clear vblank event
(2) wait vblank event
(3) write register setting 1
(4) no operation

Packet 2:
(1) clear vblank event
(2) wait vblank event
(3) write register setting 2
(4) no operation

In your current design, you modify these two packet as:

Packet 1:
(1) clear vblank event
(2) wait vblank event
(3) write register setting 1
(4) Jump to packet 2 (modified)

Packet 2:
(1) no operation (modified)
(2) no operation (modified)
(3) write register setting 2
(4) no operation

So the register setting 1 and register setting 2 could be executed in
the same vblank period.

My suggestion is: when the client want to send packet 2, it 'abort'
packet 1 at first. The 'abort' means remove it from channel. In current
mailbox interface, mbox_free_channel() is most like abort function, but
my abort would keep the channel. So maybe you need to implement a new
mailbox interface which could remove packet in the channel. So the step
would be:

(1) Client generate packet 1 which include write register setting 1
(2) Client send packet 1 to channel A

When client want to send register setting 2,

(3) Client abort channel A
(4) Client generate packet 2 which include write register setting 1 & 2
(5) Client send packet 2 to channel A

Once you have the abort function, you could use the queue mechanism in
mailbox core instead of implementing your own.

For the client which have the atomic requirement, it also need not to
implement a list to keep what command have not executed. So the abort
interface would make client and controller much simpler.

Regards,
CK

> +}
> +
> +static void cmdq_task_exec_done(struct cmdq_task *task, bool err)
> +{
> +	struct device *dev = task->cmdq->mbox.dev;
> +	struct cmdq_cb_data cmdq_cb_data;
> +
> +	dma_unmap_single(dev, task->pa_base, task->pkt->cmd_buf_size,
> +			 DMA_TO_DEVICE);
> +	if (task->pkt->cb.cb) {
> +		cmdq_cb_data.err = err;
> +		cmdq_cb_data.data = task->pkt->cb.data;
> +		task->pkt->cb.cb(cmdq_cb_data);
> +	}
> +	list_del(&task->list_entry);
> +}
> +
> +static void cmdq_task_handle_error(struct cmdq_task *task)
> +{
> +	struct cmdq_thread *thread = task->thread;
> +	struct cmdq_task *next_task;
> +
> +	dev_err(task->cmdq->mbox.dev, "task 0x%p error\n", task);
> +	WARN_ON(cmdq_thread_suspend(task->cmdq, thread) < 0);
> +	next_task = list_first_entry_or_null(&thread->task_busy_list,
> +			struct cmdq_task, list_entry);
> +	if (next_task)
> +		writel(next_task->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
> +	cmdq_thread_resume(thread);
> +}
> +
> +static void cmdq_thread_irq_handler(struct cmdq *cmdq,
> +				    struct cmdq_thread *thread)
> +{
> +	struct cmdq_task *task, *tmp, *curr_task = NULL;
> +	u32 curr_pa, irq_flag, task_end_pa;
> +	bool err;
> +
> +	irq_flag = readl(thread->base + CMDQ_THR_IRQ_STATUS);
> +	writel(~irq_flag, thread->base + CMDQ_THR_IRQ_STATUS);
> +
> +	/*
> +	 * When ISR call this function, another CPU core could run
> +	 * "release task" right before we acquire the spin lock, and thus
> +	 * reset / disable this GCE thread, so we need to check the enable
> +	 * bit of this GCE thread.
> +	 */
> +	if (!(readl(thread->base + CMDQ_THR_ENABLE_TASK) & CMDQ_THR_ENABLED))
> +		return;
> +
> +	if (irq_flag & CMDQ_THR_IRQ_ERROR)
> +		err = true;
> +	else if (irq_flag & CMDQ_THR_IRQ_DONE)
> +		err = false;
> +	else
> +		return;
> +
> +	curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR);
> +
> +	list_for_each_entry_safe(task, tmp, &thread->task_busy_list,
> +				 list_entry) {
> +		task_end_pa = task->pa_base + task->pkt->cmd_buf_size;
> +		if (curr_pa >= task->pa_base && curr_pa < task_end_pa)
> +			curr_task = task;
> +
> +		if (!curr_task || curr_pa == task_end_pa - CMDQ_INST_SIZE) {
> +			cmdq_task_exec_done(task, false);
> +			kfree(task);
> +		} else if (err) {
> +			cmdq_task_exec_done(task, true);
> +			cmdq_task_handle_error(curr_task);
> +			kfree(task);
> +		}
> +
> +		if (curr_task)
> +			break;
> +	}
> +
> +	if (list_empty(&thread->task_busy_list)) {
> +		cmdq_thread_disable(cmdq, thread);
> +		clk_disable(cmdq->clock);
> +	} else {
> +		mod_timer(&thread->timeout,
> +			  jiffies + msecs_to_jiffies(CMDQ_TIMEOUT_MS));
> +	}
> +}
> +
> +static irqreturn_t cmdq_irq_handler(int irq, void *dev)
> +{
> +	struct cmdq *cmdq = dev;
> +	unsigned long irq_status, flags = 0L;
> +	int bit;
> +
> +	irq_status = readl(cmdq->base + CMDQ_CURR_IRQ_STATUS) & CMDQ_IRQ_MASK;
> +	if (!(irq_status ^ CMDQ_IRQ_MASK))
> +		return IRQ_NONE;
> +
> +	for_each_clear_bit(bit, &irq_status, fls(CMDQ_IRQ_MASK)) {
> +		struct cmdq_thread *thread = &cmdq->thread[bit];
> +
> +		spin_lock_irqsave(&thread->chan->lock, flags);
> +		cmdq_thread_irq_handler(cmdq, thread);
> +		spin_unlock_irqrestore(&thread->chan->lock, flags);
> +	}
> +	return IRQ_HANDLED;
> +}
> +
> +static void cmdq_thread_handle_timeout(struct timer_list *t)
> +{
> +	struct cmdq_thread *thread = from_timer(thread, t, timeout);
> +	struct cmdq *cmdq = container_of(thread->chan->mbox, struct cmdq, mbox);
> +	struct cmdq_task *task, *tmp;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&thread->chan->lock, flags);
> +	WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
> +
> +	/*
> +	 * Although IRQ is disabled, GCE continues to execute.
> +	 * It may have pending IRQ before GCE thread is suspended,
> +	 * so check this condition again.
> +	 */
> +	cmdq_thread_irq_handler(cmdq, thread);
> +
> +	if (list_empty(&thread->task_busy_list)) {
> +		cmdq_thread_resume(thread);
> +		spin_unlock_irqrestore(&thread->chan->lock, flags);
> +		return;
> +	}
> +
> +	dev_err(cmdq->mbox.dev, "timeout\n");
> +	list_for_each_entry_safe(task, tmp, &thread->task_busy_list,
> +				 list_entry) {
> +		cmdq_task_exec_done(task, true);
> +		kfree(task);
> +	}
> +
> +	cmdq_thread_resume(thread);
> +	cmdq_thread_disable(cmdq, thread);
> +	clk_disable(cmdq->clock);
> +	spin_unlock_irqrestore(&thread->chan->lock, flags);
> +}
> +
> +static int cmdq_suspend(struct device *dev)
> +{
> +	struct cmdq *cmdq = dev_get_drvdata(dev);
> +	struct cmdq_thread *thread;
> +	int i;
> +	bool task_running = false;
> +
> +	cmdq->suspended = true;
> +
> +	for (i = 0; i < ARRAY_SIZE(cmdq->thread); i++) {
> +		thread = &cmdq->thread[i];
> +		if (!list_empty(&thread->task_busy_list)) {
> +			task_running = true;
> +			break;
> +		}
> +	}
> +
> +	if (task_running)
> +		dev_warn(dev, "exist running task(s) in suspend\n");
> +
> +	clk_unprepare(cmdq->clock);
> +	return 0;
> +}
> +
> +static int cmdq_resume(struct device *dev)
> +{
> +	struct cmdq *cmdq = dev_get_drvdata(dev);
> +
> +	WARN_ON(clk_prepare(cmdq->clock) < 0);
> +	cmdq->suspended = false;
> +	return 0;
> +}
> +
> +static int cmdq_remove(struct platform_device *pdev)
> +{
> +	struct cmdq *cmdq = platform_get_drvdata(pdev);
> +
> +	mbox_controller_unregister(&cmdq->mbox);
> +	clk_unprepare(cmdq->clock);
> +	return 0;
> +}
> +
> +static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
> +{
> +	cmdq_task_exec(data, chan->con_priv);
> +	return 0;
> +}
> +
> +static int cmdq_mbox_startup(struct mbox_chan *chan)
> +{
> +	return 0;
> +}
> +
> +static void cmdq_mbox_shutdown(struct mbox_chan *chan)
> +{
> +}
> +
> +static bool cmdq_mbox_last_tx_done(struct mbox_chan *chan)
> +{
> +	return true;
> +}
> +
> +static const struct mbox_chan_ops cmdq_mbox_chan_ops = {
> +	.send_data = cmdq_mbox_send_data,
> +	.startup = cmdq_mbox_startup,
> +	.shutdown = cmdq_mbox_shutdown,
> +	.last_tx_done = cmdq_mbox_last_tx_done,
> +};
> +
> +static struct mbox_chan *cmdq_xlate(struct mbox_controller *mbox,
> +		const struct of_phandle_args *sp)
> +{
> +	int ind = sp->args[0];
> +	struct cmdq_thread *thread;
> +
> +	if (ind >= mbox->num_chans)
> +		return ERR_PTR(-EINVAL);
> +
> +	thread = mbox->chans[ind].con_priv;
> +	thread->atomic_exec = (sp->args[1] != 0);
> +	thread->chan = &mbox->chans[ind];
> +
> +	return &mbox->chans[ind];
> +}
> +
> +static int cmdq_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct resource *res;
> +	struct cmdq *cmdq;
> +	int err, i;
> +
> +	cmdq = devm_kzalloc(dev, sizeof(*cmdq), GFP_KERNEL);
> +	if (!cmdq)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	cmdq->base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(cmdq->base)) {
> +		dev_err(dev, "failed to ioremap gce\n");
> +		return PTR_ERR(cmdq->base);
> +	}
> +
> +	cmdq->irq = platform_get_irq(pdev, 0);
> +	if (!cmdq->irq) {
> +		dev_err(dev, "failed to get irq\n");
> +		return -EINVAL;
> +	}
> +	err = devm_request_irq(dev, cmdq->irq, cmdq_irq_handler, IRQF_SHARED,
> +			       "mtk_cmdq", cmdq);
> +	if (err < 0) {
> +		dev_err(dev, "failed to register ISR (%d)\n", err);
> +		return err;
> +	}
> +
> +	dev_dbg(dev, "cmdq device: addr:0x%p, va:0x%p, irq:%d\n",
> +		dev, cmdq->base, cmdq->irq);
> +
> +	cmdq->clock = devm_clk_get(dev, "gce");
> +	if (IS_ERR(cmdq->clock)) {
> +		dev_err(dev, "failed to get gce clk\n");
> +		return PTR_ERR(cmdq->clock);
> +	}
> +
> +	cmdq->mbox.dev = dev;
> +	cmdq->mbox.chans = devm_kcalloc(dev, CMDQ_THR_MAX_COUNT,
> +					sizeof(*cmdq->mbox.chans), GFP_KERNEL);
> +	if (!cmdq->mbox.chans)
> +		return -ENOMEM;
> +
> +	cmdq->mbox.num_chans = CMDQ_THR_MAX_COUNT;
> +	cmdq->mbox.ops = &cmdq_mbox_chan_ops;
> +	cmdq->mbox.of_xlate = cmdq_xlate;
> +
> +	/* make use of TXDONE_BY_ACK */
> +	cmdq->mbox.txdone_irq = false;
> +	cmdq->mbox.txdone_poll = false;
> +
> +	for (i = 0; i < ARRAY_SIZE(cmdq->thread); i++) {
> +		cmdq->thread[i].base = cmdq->base + CMDQ_THR_BASE +
> +				CMDQ_THR_SIZE * i;
> +		INIT_LIST_HEAD(&cmdq->thread[i].task_busy_list);
> +		timer_setup(&cmdq->thread[i].timeout,
> +				cmdq_thread_handle_timeout, 0);
> +		cmdq->mbox.chans[i].con_priv = &cmdq->thread[i];
> +	}
> +
> +	err = mbox_controller_register(&cmdq->mbox);
> +	if (err < 0) {
> +		dev_err(dev, "failed to register mailbox: %d\n", err);
> +		return err;
> +	}
> +
> +	platform_set_drvdata(pdev, cmdq);
> +	WARN_ON(clk_prepare(cmdq->clock) < 0);
> +
> +	return 0;
> +}
> +
> +static const struct dev_pm_ops cmdq_pm_ops = {
> +	.suspend = cmdq_suspend,
> +	.resume = cmdq_resume,
> +};
> +
> +static const struct of_device_id cmdq_of_ids[] = {
> +	{.compatible = "mediatek,mt8173-gce",},
> +	{}
> +};
> +
> +static struct platform_driver cmdq_drv = {
> +	.probe = cmdq_probe,
> +	.remove = cmdq_remove,
> +	.driver = {
> +		.name = "mtk_cmdq",
> +		.pm = &cmdq_pm_ops,
> +		.of_match_table = cmdq_of_ids,
> +	}
> +};
> +
> +builtin_platform_driver(cmdq_drv);
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> new file mode 100644
> index 0000000..c463f2f
> --- /dev/null
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -0,0 +1,77 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __MTK_CMDQ_MAILBOX_H__
> +#define __MTK_CMDQ_MAILBOX_H__
> +
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/types.h>
> +
> +#define CMDQ_INST_SIZE			8 /* instruction is 64-bit */
> +#define CMDQ_SUBSYS_SHIFT		16
> +#define CMDQ_OP_CODE_SHIFT		24
> +#define CMDQ_JUMP_PASS			CMDQ_INST_SIZE
> +
> +#define CMDQ_WFE_UPDATE			BIT(31)
> +#define CMDQ_WFE_WAIT			BIT(15)
> +#define CMDQ_WFE_WAIT_VALUE		0x1
> +
> +/*
> + * CMDQ_CODE_MASK:
> + *   set write mask
> + *   format: op mask
> + * CMDQ_CODE_WRITE:
> + *   write value into target register
> + *   format: op subsys address value
> + * CMDQ_CODE_JUMP:
> + *   jump by offset
> + *   format: op offset
> + * CMDQ_CODE_WFE:
> + *   wait for event and clear
> + *   it is just clear if no wait
> + *   format: [wait]  op event update:1 to_wait:1 wait:1
> + *           [clear] op event update:1 to_wait:0 wait:0
> + * CMDQ_CODE_EOC:
> + *   end of command
> + *   format: op irq_flag
> + */
> +enum cmdq_code {
> +	CMDQ_CODE_MASK = 0x02,
> +	CMDQ_CODE_WRITE = 0x04,
> +	CMDQ_CODE_JUMP = 0x10,
> +	CMDQ_CODE_WFE = 0x20,
> +	CMDQ_CODE_EOC = 0x40,
> +};
> +
> +struct cmdq_cb_data {
> +	bool	err;
> +	void	*data;
> +};
> +
> +typedef void (*cmdq_async_flush_cb)(struct cmdq_cb_data data);
> +
> +struct cmdq_task_cb {
> +	cmdq_async_flush_cb	cb;
> +	void			*data;
> +};
> +
> +struct cmdq_pkt {
> +	void			*va_base;
> +	dma_addr_t		pa_base;
> +	size_t			cmd_buf_size; /* command occupied size */
> +	size_t			buf_size; /* real buffer size */
> +	struct cmdq_task_cb	cb;
> +};
> +
> +#endif /* __MTK_CMDQ_MAILBOX_H__ */

[PATCH v21 2/4] mailbox: mediatek: Add Mediatek CMDQ driver

[houlong wei]

On Wed, 2018-02-21 at 11:53 +0800, CK Hu wrote:
> Hi, Houlong:
> 
> I've one inline comment.
> 
> On Wed, 2018-01-31 at 15:28 +0800, houlong.wei at mediatek.com wrote:
> > From: "hs.liao at mediatek.com" <hs.liao@mediatek.com>
> > 
> > This patch is first version of Mediatek Command Queue(CMDQ) driver. The
> > CMDQ is used to help write registers with critical time limitation,
> > such as updating display configuration during the vblank. It controls
> > Global Command Engine (GCE) hardware to achieve this requirement.
> > Currently, CMDQ only supports display related hardwares, but we expect
> > it can be extended to other hardwares for future requirements.
> > 
> > Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
> > Signed-off-by: HS Liao <hs.liao@mediatek.com>
> > Signed-off-by: CK Hu <ck.hu@mediatek.com>
> > ---
> >  drivers/mailbox/Kconfig                  |   10 +
> >  drivers/mailbox/Makefile                 |    2 +
> >  drivers/mailbox/mtk-cmdq-mailbox.c       |  594 ++++++++++++++++++++++++++++++
> >  include/linux/mailbox/mtk-cmdq-mailbox.h |   77 ++++
> >  4 files changed, 683 insertions(+)
> >  create mode 100644 drivers/mailbox/mtk-cmdq-mailbox.c
> >  create mode 100644 include/linux/mailbox/mtk-cmdq-mailbox.h
> > 
> > diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
> > index ba2f152..43bb26f 100644
> > --- a/drivers/mailbox/Kconfig
> > +++ b/drivers/mailbox/Kconfig
> > @@ -171,4 +171,14 @@ config BCM_FLEXRM_MBOX
> >  	  Mailbox implementation of the Broadcom FlexRM ring manager,
> >  	  which provides access to various offload engines on Broadcom
> >  	  SoCs. Say Y here if you want to use the Broadcom FlexRM.
> > +
> > +config MTK_CMDQ_MBOX
> > +	bool "MediaTek CMDQ Mailbox Support"
> > +	depends on ARM64 && ( ARCH_MEDIATEK || COMPILE_TEST )
> > +	select MTK_INFRACFG
> > +	help
> > +	  Say yes here to add support for the MediaTek Command Queue (CMDQ)
> > +	  mailbox driver. The CMDQ is used to help read/write registers with
> > +	  critical time limitation, such as updating display configuration
> > +	  during the vblank.
> >  endif
> > diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
> > index 4896f8d..484d341 100644
> > --- a/drivers/mailbox/Makefile
> > +++ b/drivers/mailbox/Makefile
> > @@ -36,3 +36,5 @@ obj-$(CONFIG_BCM_FLEXRM_MBOX)	+= bcm-flexrm-mailbox.o
> >  obj-$(CONFIG_QCOM_APCS_IPC)	+= qcom-apcs-ipc-mailbox.o
> >  
> >  obj-$(CONFIG_TEGRA_HSP_MBOX)	+= tegra-hsp.o
> > +
> > +obj-$(CONFIG_MTK_CMDQ_MBOX)	+= mtk-cmdq-mailbox.o
> > diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> > new file mode 100644
> > index 0000000..394a335
> > --- /dev/null
> > +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> > @@ -0,0 +1,594 @@
> > +/*
> > + * Copyright (c) 2015 MediaTek Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/bitops.h>
> > +#include <linux/clk.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/errno.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mailbox_controller.h>
> > +#include <linux/mailbox/mtk-cmdq-mailbox.h>
> > +#include <linux/timer.h>
> > +
> > +#define CMDQ_THR_MAX_COUNT		16
> > +#define CMDQ_OP_CODE_MASK		(0xff << CMDQ_OP_CODE_SHIFT)
> > +#define CMDQ_TIMEOUT_MS			1000
> > +#define CMDQ_IRQ_MASK			0xffff
> > +#define CMDQ_NUM_CMD(t)			(t->cmd_buf_size / CMDQ_INST_SIZE)
> > +
> > +#define CMDQ_CURR_IRQ_STATUS		0x10
> > +#define CMDQ_THR_SLOT_CYCLES		0x30
> > +
> > +#define CMDQ_THR_BASE			0x100
> > +#define CMDQ_THR_SIZE			0x80
> > +#define CMDQ_THR_WARM_RESET		0x00
> > +#define CMDQ_THR_ENABLE_TASK		0x04
> > +#define CMDQ_THR_SUSPEND_TASK		0x08
> > +#define CMDQ_THR_CURR_STATUS		0x0c
> > +#define CMDQ_THR_IRQ_STATUS		0x10
> > +#define CMDQ_THR_IRQ_ENABLE		0x14
> > +#define CMDQ_THR_CURR_ADDR		0x20
> > +#define CMDQ_THR_END_ADDR		0x24
> > +#define CMDQ_THR_WAIT_TOKEN		0x30
> > +
> > +#define CMDQ_THR_ENABLED		0x1
> > +#define CMDQ_THR_DISABLED		0x0
> > +#define CMDQ_THR_SUSPEND		0x1
> > +#define CMDQ_THR_RESUME			0x0
> > +#define CMDQ_THR_STATUS_SUSPENDED	BIT(1)
> > +#define CMDQ_THR_DO_WARM_RESET		BIT(0)
> > +#define CMDQ_THR_ACTIVE_SLOT_CYCLES	0x3200
> > +#define CMDQ_THR_IRQ_DONE		0x1
> > +#define CMDQ_THR_IRQ_ERROR		0x12
> > +#define CMDQ_THR_IRQ_EN			(CMDQ_THR_IRQ_ERROR | CMDQ_THR_IRQ_DONE)
> > +#define CMDQ_THR_IS_WAITING		BIT(31)
> > +
> > +#define CMDQ_JUMP_BY_OFFSET		0x10000000
> > +#define CMDQ_JUMP_BY_PA			0x10000001
> > +
> > +struct cmdq_thread {
> > +	struct mbox_chan	*chan;
> > +	void __iomem		*base;
> > +	struct list_head	task_busy_list;
> > +	struct timer_list	timeout;
> > +	bool			atomic_exec;
> > +};
> > +
> > +struct cmdq_task {
> > +	struct cmdq		*cmdq;
> > +	struct list_head	list_entry;
> > +	dma_addr_t		pa_base;
> > +	struct cmdq_thread	*thread;
> > +	struct cmdq_pkt		*pkt; /* the packet sent from mailbox client */
> > +};
> > +
> > +struct cmdq {
> > +	struct mbox_controller	mbox;
> > +	void __iomem		*base;
> > +	u32			irq;
> > +	struct cmdq_thread	thread[CMDQ_THR_MAX_COUNT];
> > +	struct clk		*clock;
> > +	bool			suspended;
> > +};
> > +
> > +static int cmdq_thread_suspend(struct cmdq *cmdq, struct cmdq_thread *thread)
> > +{
> > +	u32 status;
> > +
> > +	writel(CMDQ_THR_SUSPEND, thread->base + CMDQ_THR_SUSPEND_TASK);
> > +
> > +	/* If already disabled, treat as suspended successful. */
> > +	if (!(readl(thread->base + CMDQ_THR_ENABLE_TASK) & CMDQ_THR_ENABLED))
> > +		return 0;
> > +
> > +	if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_CURR_STATUS,
> > +			status, status & CMDQ_THR_STATUS_SUSPENDED, 0, 10)) {
> > +		dev_err(cmdq->mbox.dev, "suspend GCE thread 0x%x failed\n",
> > +			(u32)(thread->base - cmdq->base));
> > +		return -EFAULT;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static void cmdq_thread_resume(struct cmdq_thread *thread)
> > +{
> > +	writel(CMDQ_THR_RESUME, thread->base + CMDQ_THR_SUSPEND_TASK);
> > +}
> > +
> > +static int cmdq_thread_reset(struct cmdq *cmdq, struct cmdq_thread *thread)
> > +{
> > +	u32 warm_reset;
> > +
> > +	writel(CMDQ_THR_DO_WARM_RESET, thread->base + CMDQ_THR_WARM_RESET);
> > +	if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_WARM_RESET,
> > +			warm_reset, !(warm_reset & CMDQ_THR_DO_WARM_RESET),
> > +			0, 10)) {
> > +		dev_err(cmdq->mbox.dev, "reset GCE thread 0x%x failed\n",
> > +			(u32)(thread->base - cmdq->base));
> > +		return -EFAULT;
> > +	}
> > +	writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
> > +	return 0;
> > +}
> > +
> > +static void cmdq_thread_disable(struct cmdq *cmdq, struct cmdq_thread *thread)
> > +{
> > +	cmdq_thread_reset(cmdq, thread);
> > +	writel(CMDQ_THR_DISABLED, thread->base + CMDQ_THR_ENABLE_TASK);
> > +}
> > +
> > +/* notify GCE to re-fetch commands by setting GCE thread PC */
> > +static void cmdq_thread_invalidate_fetched_data(struct cmdq_thread *thread)
> > +{
> > +	writel(readl(thread->base + CMDQ_THR_CURR_ADDR),
> > +	       thread->base + CMDQ_THR_CURR_ADDR);
> > +}
> > +
> > +static void cmdq_task_insert_into_thread(struct cmdq_task *task)
> > +{
> > +	struct device *dev = task->cmdq->mbox.dev;
> > +	struct cmdq_thread *thread = task->thread;
> > +	struct cmdq_task *prev_task = list_last_entry(
> > +			&thread->task_busy_list, typeof(*task), list_entry);
> > +	u64 *prev_task_base = prev_task->pkt->va_base;
> > +
> > +	/* let previous task jump to this task */
> > +	dma_sync_single_for_cpu(dev, prev_task->pa_base,
> > +				prev_task->pkt->cmd_buf_size, DMA_TO_DEVICE);
> > +	prev_task_base[CMDQ_NUM_CMD(prev_task->pkt) - 1] =
> > +		(u64)CMDQ_JUMP_BY_PA << 32 | task->pa_base;
> > +	dma_sync_single_for_device(dev, prev_task->pa_base,
> > +				   prev_task->pkt->cmd_buf_size, DMA_TO_DEVICE);
> > +
> > +	cmdq_thread_invalidate_fetched_data(thread);
> > +}
> > +
> > +static bool cmdq_command_is_wfe(u64 cmd)
> > +{
> > +	u64 wfe_option = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
> > +	u64 wfe_op = (u64)(CMDQ_CODE_WFE << CMDQ_OP_CODE_SHIFT) << 32;
> > +	u64 wfe_mask = (u64)CMDQ_OP_CODE_MASK << 32 | 0xffffffff;
> > +
> > +	return ((cmd & wfe_mask) == (wfe_op | wfe_option));
> > +}
> > +
> > +/* we assume tasks in the same display GCE thread are waiting the same event. */
> > +static void cmdq_task_remove_wfe(struct cmdq_task *task)
> > +{
> > +	struct device *dev = task->cmdq->mbox.dev;
> > +	u64 *base = task->pkt->va_base;
> > +	int i;
> > +
> > +	dma_sync_single_for_cpu(dev, task->pa_base, task->pkt->cmd_buf_size,
> > +				DMA_TO_DEVICE);
> > +	for (i = 0; i < CMDQ_NUM_CMD(task->pkt); i++)
> > +		if (cmdq_command_is_wfe(base[i]))
> > +			base[i] = (u64)CMDQ_JUMP_BY_OFFSET << 32 |
> > +				  CMDQ_JUMP_PASS;
> > +	dma_sync_single_for_device(dev, task->pa_base, task->pkt->cmd_buf_size,
> > +				   DMA_TO_DEVICE);
> > +}
> > +
> > +static bool cmdq_thread_is_in_wfe(struct cmdq_thread *thread)
> > +{
> > +	return readl(thread->base + CMDQ_THR_WAIT_TOKEN) & CMDQ_THR_IS_WAITING;
> > +}
> > +
> > +static void cmdq_thread_wait_end(struct cmdq_thread *thread,
> > +				 unsigned long end_pa)
> > +{
> > +	struct device *dev = thread->chan->mbox->dev;
> > +	unsigned long curr_pa;
> > +
> > +	if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_CURR_ADDR,
> > +			curr_pa, curr_pa == end_pa, 1, 20))
> > +		dev_err(dev, "GCE thread cannot run to end.\n");
> > +}
> > +
> > +static void cmdq_task_exec(struct cmdq_pkt *pkt, struct cmdq_thread *thread)
> > +{
> > +	struct cmdq *cmdq;
> > +	struct cmdq_task *task;
> > +	unsigned long curr_pa, end_pa;
> > +
> > +	cmdq = dev_get_drvdata(thread->chan->mbox->dev);
> > +
> > +	/* Client should not flush new tasks if suspended. */
> > +	WARN_ON(cmdq->suspended);
> > +
> > +	task = kzalloc(sizeof(*task), GFP_ATOMIC);
> > +	task->cmdq = cmdq;
> > +	INIT_LIST_HEAD(&task->list_entry);
> > +	task->pa_base = pkt->pa_base;
> > +	task->thread = thread;
> > +	task->pkt = pkt;
> > +
> > +	if (list_empty(&thread->task_busy_list)) {
> > +		WARN_ON(clk_enable(cmdq->clock) < 0);
> > +		WARN_ON(cmdq_thread_reset(cmdq, thread) < 0);
> > +
> > +		writel(task->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
> > +		writel(task->pa_base + pkt->cmd_buf_size,
> > +		       thread->base + CMDQ_THR_END_ADDR);
> > +		writel(CMDQ_THR_IRQ_EN, thread->base + CMDQ_THR_IRQ_ENABLE);
> > +		writel(CMDQ_THR_ENABLED, thread->base + CMDQ_THR_ENABLE_TASK);
> > +
> > +		mod_timer(&thread->timeout,
> > +			  jiffies + msecs_to_jiffies(CMDQ_TIMEOUT_MS));
> > +	} else {
> > +		WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
> > +		curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR);
> > +		end_pa = readl(thread->base + CMDQ_THR_END_ADDR);
> > +
> > +		/*
> > +		 * Atomic execution should remove the following wfe, i.e. only
> > +		 * wait event at first task, and prevent to pause when running.
> > +		 */
> > +		if (thread->atomic_exec) {
> > +			/* GCE is executing if command is not WFE */
> > +			if (!cmdq_thread_is_in_wfe(thread)) {
> > +				cmdq_thread_resume(thread);
> > +				cmdq_thread_wait_end(thread, end_pa);
> > +				WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
> > +				/* set to this task directly */
> > +				writel(task->pa_base,
> > +				       thread->base + CMDQ_THR_CURR_ADDR);
> > +			} else {
> > +				cmdq_task_insert_into_thread(task);
> > +				cmdq_task_remove_wfe(task);
> > +				smp_mb(); /* modify jump before enable thread */
> > +			}
> > +		} else {
> > +			/* check boundary */
> > +			if (curr_pa == end_pa - CMDQ_INST_SIZE ||
> > +			    curr_pa == end_pa) {
> > +				/* set to this task directly */
> > +				writel(task->pa_base,
> > +				       thread->base + CMDQ_THR_CURR_ADDR);
> > +			} else {
> > +				cmdq_task_insert_into_thread(task);
> > +				smp_mb(); /* modify jump before enable thread */
> > +			}
> > +		}
> > +		writel(task->pa_base + pkt->cmd_buf_size,
> > +		       thread->base + CMDQ_THR_END_ADDR);
> > +		cmdq_thread_resume(thread);
> > +	}
> > +	list_move_tail(&task->list_entry, &thread->task_busy_list);
> 
> You implement a list to queue command because you need to execute
> multiple packet in the same vblank period. I've a suggestion that you
> need not to implement a list. Once cmdq driver receive two packet as
> below:
> 
> Packet 1:
> (1) clear vblank event
> (2) wait vblank event
> (3) write register setting 1
> (4) no operation
> 
> Packet 2:
> (1) clear vblank event
> (2) wait vblank event
> (3) write register setting 2
> (4) no operation
> 
> In your current design, you modify these two packet as:
> 
> Packet 1:
> (1) clear vblank event
> (2) wait vblank event
> (3) write register setting 1
> (4) Jump to packet 2 (modified)
> 
> Packet 2:
> (1) no operation (modified)
> (2) no operation (modified)
> (3) write register setting 2
> (4) no operation
> 
> So the register setting 1 and register setting 2 could be executed in
> the same vblank period.
> 
> My suggestion is: when the client want to send packet 2, it 'abort'
> packet 1 at first. The 'abort' means remove it from channel. In current
> mailbox interface, mbox_free_channel() is most like abort function, but
> my abort would keep the channel. So maybe you need to implement a new
> mailbox interface which could remove packet in the channel. So the step
> would be:
> 
> (1) Client generate packet 1 which include write register setting 1
> (2) Client send packet 1 to channel A
> 
> When client want to send register setting 2,
> 
> (3) Client abort channel A
> (4) Client generate packet 2 which include write register setting 1 & 2
> (5) Client send packet 2 to channel A
> 
> Once you have the abort function, you could use the queue mechanism in
> mailbox core instead of implementing your own.
> 
> For the client which have the atomic requirement, it also need not to
> implement a list to keep what command have not executed. So the abort
> interface would make client and controller much simpler.
> 
> Regards,
> CK
> 

Hi CK, thanks for you suggestion. Since current mailbox framework has
no 'abort' function and need add new interface. It may be complicated
to do this. Could we keep current solution?

> > +}
> > +
> > +static void cmdq_task_exec_done(struct cmdq_task *task, bool err)
> > +{
> > +	struct device *dev = task->cmdq->mbox.dev;
> > +	struct cmdq_cb_data cmdq_cb_data;
> > +
> > +	dma_unmap_single(dev, task->pa_base, task->pkt->cmd_buf_size,
> > +			 DMA_TO_DEVICE);
> > +	if (task->pkt->cb.cb) {
> > +		cmdq_cb_data.err = err;
> > +		cmdq_cb_data.data = task->pkt->cb.data;
> > +		task->pkt->cb.cb(cmdq_cb_data);
> > +	}
> > +	list_del(&task->list_entry);
> > +}
> > +
> > +static void cmdq_task_handle_error(struct cmdq_task *task)
> > +{
> > +	struct cmdq_thread *thread = task->thread;
> > +	struct cmdq_task *next_task;
> > +
> > +	dev_err(task->cmdq->mbox.dev, "task 0x%p error\n", task);
> > +	WARN_ON(cmdq_thread_suspend(task->cmdq, thread) < 0);
> > +	next_task = list_first_entry_or_null(&thread->task_busy_list,
> > +			struct cmdq_task, list_entry);
> > +	if (next_task)
> > +		writel(next_task->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
> > +	cmdq_thread_resume(thread);
> > +}
> > +
> > +static void cmdq_thread_irq_handler(struct cmdq *cmdq,
> > +				    struct cmdq_thread *thread)
> > +{
> > +	struct cmdq_task *task, *tmp, *curr_task = NULL;
> > +	u32 curr_pa, irq_flag, task_end_pa;
> > +	bool err;
> > +
> > +	irq_flag = readl(thread->base + CMDQ_THR_IRQ_STATUS);
> > +	writel(~irq_flag, thread->base + CMDQ_THR_IRQ_STATUS);
> > +
> > +	/*
> > +	 * When ISR call this function, another CPU core could run
> > +	 * "release task" right before we acquire the spin lock, and thus
> > +	 * reset / disable this GCE thread, so we need to check the enable
> > +	 * bit of this GCE thread.
> > +	 */
> > +	if (!(readl(thread->base + CMDQ_THR_ENABLE_TASK) & CMDQ_THR_ENABLED))
> > +		return;
> > +
> > +	if (irq_flag & CMDQ_THR_IRQ_ERROR)
> > +		err = true;
> > +	else if (irq_flag & CMDQ_THR_IRQ_DONE)
> > +		err = false;
> > +	else
> > +		return;
> > +
> > +	curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR);
> > +
> > +	list_for_each_entry_safe(task, tmp, &thread->task_busy_list,
> > +				 list_entry) {
> > +		task_end_pa = task->pa_base + task->pkt->cmd_buf_size;
> > +		if (curr_pa >= task->pa_base && curr_pa < task_end_pa)
> > +			curr_task = task;
> > +
> > +		if (!curr_task || curr_pa == task_end_pa - CMDQ_INST_SIZE) {
> > +			cmdq_task_exec_done(task, false);
> > +			kfree(task);
> > +		} else if (err) {
> > +			cmdq_task_exec_done(task, true);
> > +			cmdq_task_handle_error(curr_task);
> > +			kfree(task);
> > +		}
> > +
> > +		if (curr_task)
> > +			break;
> > +	}
> > +
> > +	if (list_empty(&thread->task_busy_list)) {
> > +		cmdq_thread_disable(cmdq, thread);
> > +		clk_disable(cmdq->clock);
> > +	} else {
> > +		mod_timer(&thread->timeout,
> > +			  jiffies + msecs_to_jiffies(CMDQ_TIMEOUT_MS));
> > +	}
> > +}
> > +
> > +static irqreturn_t cmdq_irq_handler(int irq, void *dev)
> > +{
> > +	struct cmdq *cmdq = dev;
> > +	unsigned long irq_status, flags = 0L;
> > +	int bit;
> > +
> > +	irq_status = readl(cmdq->base + CMDQ_CURR_IRQ_STATUS) & CMDQ_IRQ_MASK;
> > +	if (!(irq_status ^ CMDQ_IRQ_MASK))
> > +		return IRQ_NONE;
> > +
> > +	for_each_clear_bit(bit, &irq_status, fls(CMDQ_IRQ_MASK)) {
> > +		struct cmdq_thread *thread = &cmdq->thread[bit];
> > +
> > +		spin_lock_irqsave(&thread->chan->lock, flags);
> > +		cmdq_thread_irq_handler(cmdq, thread);
> > +		spin_unlock_irqrestore(&thread->chan->lock, flags);
> > +	}
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static void cmdq_thread_handle_timeout(struct timer_list *t)
> > +{
> > +	struct cmdq_thread *thread = from_timer(thread, t, timeout);
> > +	struct cmdq *cmdq = container_of(thread->chan->mbox, struct cmdq, mbox);
> > +	struct cmdq_task *task, *tmp;
> > +	unsigned long flags;
> > +
> > +	spin_lock_irqsave(&thread->chan->lock, flags);
> > +	WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
> > +
> > +	/*
> > +	 * Although IRQ is disabled, GCE continues to execute.
> > +	 * It may have pending IRQ before GCE thread is suspended,
> > +	 * so check this condition again.
> > +	 */
> > +	cmdq_thread_irq_handler(cmdq, thread);
> > +
> > +	if (list_empty(&thread->task_busy_list)) {
> > +		cmdq_thread_resume(thread);
> > +		spin_unlock_irqrestore(&thread->chan->lock, flags);
> > +		return;
> > +	}
> > +
> > +	dev_err(cmdq->mbox.dev, "timeout\n");
> > +	list_for_each_entry_safe(task, tmp, &thread->task_busy_list,
> > +				 list_entry) {
> > +		cmdq_task_exec_done(task, true);
> > +		kfree(task);
> > +	}
> > +
> > +	cmdq_thread_resume(thread);
> > +	cmdq_thread_disable(cmdq, thread);
> > +	clk_disable(cmdq->clock);
> > +	spin_unlock_irqrestore(&thread->chan->lock, flags);
> > +}
> > +
> > +static int cmdq_suspend(struct device *dev)
> > +{
> > +	struct cmdq *cmdq = dev_get_drvdata(dev);
> > +	struct cmdq_thread *thread;
> > +	int i;
> > +	bool task_running = false;
> > +
> > +	cmdq->suspended = true;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(cmdq->thread); i++) {
> > +		thread = &cmdq->thread[i];
> > +		if (!list_empty(&thread->task_busy_list)) {
> > +			task_running = true;
> > +			break;
> > +		}
> > +	}
> > +
> > +	if (task_running)
> > +		dev_warn(dev, "exist running task(s) in suspend\n");
> > +
> > +	clk_unprepare(cmdq->clock);
> > +	return 0;
> > +}
> > +
> > +static int cmdq_resume(struct device *dev)
> > +{
> > +	struct cmdq *cmdq = dev_get_drvdata(dev);
> > +
> > +	WARN_ON(clk_prepare(cmdq->clock) < 0);
> > +	cmdq->suspended = false;
> > +	return 0;
> > +}
> > +
> > +static int cmdq_remove(struct platform_device *pdev)
> > +{
> > +	struct cmdq *cmdq = platform_get_drvdata(pdev);
> > +
> > +	mbox_controller_unregister(&cmdq->mbox);
> > +	clk_unprepare(cmdq->clock);
> > +	return 0;
> > +}
> > +
> > +static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
> > +{
> > +	cmdq_task_exec(data, chan->con_priv);
> > +	return 0;
> > +}
> > +
> > +static int cmdq_mbox_startup(struct mbox_chan *chan)
> > +{
> > +	return 0;
> > +}
> > +
> > +static void cmdq_mbox_shutdown(struct mbox_chan *chan)
> > +{
> > +}
> > +
> > +static bool cmdq_mbox_last_tx_done(struct mbox_chan *chan)
> > +{
> > +	return true;
> > +}
> > +
> > +static const struct mbox_chan_ops cmdq_mbox_chan_ops = {
> > +	.send_data = cmdq_mbox_send_data,
> > +	.startup = cmdq_mbox_startup,
> > +	.shutdown = cmdq_mbox_shutdown,
> > +	.last_tx_done = cmdq_mbox_last_tx_done,
> > +};
> > +
> > +static struct mbox_chan *cmdq_xlate(struct mbox_controller *mbox,
> > +		const struct of_phandle_args *sp)
> > +{
> > +	int ind = sp->args[0];
> > +	struct cmdq_thread *thread;
> > +
> > +	if (ind >= mbox->num_chans)
> > +		return ERR_PTR(-EINVAL);
> > +
> > +	thread = mbox->chans[ind].con_priv;
> > +	thread->atomic_exec = (sp->args[1] != 0);
> > +	thread->chan = &mbox->chans[ind];
> > +
> > +	return &mbox->chans[ind];
> > +}
> > +
> > +static int cmdq_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct resource *res;
> > +	struct cmdq *cmdq;
> > +	int err, i;
> > +
> > +	cmdq = devm_kzalloc(dev, sizeof(*cmdq), GFP_KERNEL);
> > +	if (!cmdq)
> > +		return -ENOMEM;
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	cmdq->base = devm_ioremap_resource(dev, res);
> > +	if (IS_ERR(cmdq->base)) {
> > +		dev_err(dev, "failed to ioremap gce\n");
> > +		return PTR_ERR(cmdq->base);
> > +	}
> > +
> > +	cmdq->irq = platform_get_irq(pdev, 0);
> > +	if (!cmdq->irq) {
> > +		dev_err(dev, "failed to get irq\n");
> > +		return -EINVAL;
> > +	}
> > +	err = devm_request_irq(dev, cmdq->irq, cmdq_irq_handler, IRQF_SHARED,
> > +			       "mtk_cmdq", cmdq);
> > +	if (err < 0) {
> > +		dev_err(dev, "failed to register ISR (%d)\n", err);
> > +		return err;
> > +	}
> > +
> > +	dev_dbg(dev, "cmdq device: addr:0x%p, va:0x%p, irq:%d\n",
> > +		dev, cmdq->base, cmdq->irq);
> > +
> > +	cmdq->clock = devm_clk_get(dev, "gce");
> > +	if (IS_ERR(cmdq->clock)) {
> > +		dev_err(dev, "failed to get gce clk\n");
> > +		return PTR_ERR(cmdq->clock);
> > +	}
> > +
> > +	cmdq->mbox.dev = dev;
> > +	cmdq->mbox.chans = devm_kcalloc(dev, CMDQ_THR_MAX_COUNT,
> > +					sizeof(*cmdq->mbox.chans), GFP_KERNEL);
> > +	if (!cmdq->mbox.chans)
> > +		return -ENOMEM;
> > +
> > +	cmdq->mbox.num_chans = CMDQ_THR_MAX_COUNT;
> > +	cmdq->mbox.ops = &cmdq_mbox_chan_ops;
> > +	cmdq->mbox.of_xlate = cmdq_xlate;
> > +
> > +	/* make use of TXDONE_BY_ACK */
> > +	cmdq->mbox.txdone_irq = false;
> > +	cmdq->mbox.txdone_poll = false;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(cmdq->thread); i++) {
> > +		cmdq->thread[i].base = cmdq->base + CMDQ_THR_BASE +
> > +				CMDQ_THR_SIZE * i;
> > +		INIT_LIST_HEAD(&cmdq->thread[i].task_busy_list);
> > +		timer_setup(&cmdq->thread[i].timeout,
> > +				cmdq_thread_handle_timeout, 0);
> > +		cmdq->mbox.chans[i].con_priv = &cmdq->thread[i];
> > +	}
> > +
> > +	err = mbox_controller_register(&cmdq->mbox);
> > +	if (err < 0) {
> > +		dev_err(dev, "failed to register mailbox: %d\n", err);
> > +		return err;
> > +	}
> > +
> > +	platform_set_drvdata(pdev, cmdq);
> > +	WARN_ON(clk_prepare(cmdq->clock) < 0);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct dev_pm_ops cmdq_pm_ops = {
> > +	.suspend = cmdq_suspend,
> > +	.resume = cmdq_resume,
> > +};
> > +
> > +static const struct of_device_id cmdq_of_ids[] = {
> > +	{.compatible = "mediatek,mt8173-gce",},
> > +	{}
> > +};
> > +
> > +static struct platform_driver cmdq_drv = {
> > +	.probe = cmdq_probe,
> > +	.remove = cmdq_remove,
> > +	.driver = {
> > +		.name = "mtk_cmdq",
> > +		.pm = &cmdq_pm_ops,
> > +		.of_match_table = cmdq_of_ids,
> > +	}
> > +};
> > +
> > +builtin_platform_driver(cmdq_drv);
> > diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> > new file mode 100644
> > index 0000000..c463f2f
> > --- /dev/null
> > +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> > @@ -0,0 +1,77 @@
> > +/*
> > + * Copyright (c) 2015 MediaTek Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#ifndef __MTK_CMDQ_MAILBOX_H__
> > +#define __MTK_CMDQ_MAILBOX_H__
> > +
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +#include <linux/types.h>
> > +
> > +#define CMDQ_INST_SIZE			8 /* instruction is 64-bit */
> > +#define CMDQ_SUBSYS_SHIFT		16
> > +#define CMDQ_OP_CODE_SHIFT		24
> > +#define CMDQ_JUMP_PASS			CMDQ_INST_SIZE
> > +
> > +#define CMDQ_WFE_UPDATE			BIT(31)
> > +#define CMDQ_WFE_WAIT			BIT(15)
> > +#define CMDQ_WFE_WAIT_VALUE		0x1
> > +
> > +/*
> > + * CMDQ_CODE_MASK:
> > + *   set write mask
> > + *   format: op mask
> > + * CMDQ_CODE_WRITE:
> > + *   write value into target register
> > + *   format: op subsys address value
> > + * CMDQ_CODE_JUMP:
> > + *   jump by offset
> > + *   format: op offset
> > + * CMDQ_CODE_WFE:
> > + *   wait for event and clear
> > + *   it is just clear if no wait
> > + *   format: [wait]  op event update:1 to_wait:1 wait:1
> > + *           [clear] op event update:1 to_wait:0 wait:0
> > + * CMDQ_CODE_EOC:
> > + *   end of command
> > + *   format: op irq_flag
> > + */
> > +enum cmdq_code {
> > +	CMDQ_CODE_MASK = 0x02,
> > +	CMDQ_CODE_WRITE = 0x04,
> > +	CMDQ_CODE_JUMP = 0x10,
> > +	CMDQ_CODE_WFE = 0x20,
> > +	CMDQ_CODE_EOC = 0x40,
> > +};
> > +
> > +struct cmdq_cb_data {
> > +	bool	err;
> > +	void	*data;
> > +};
> > +
> > +typedef void (*cmdq_async_flush_cb)(struct cmdq_cb_data data);
> > +
> > +struct cmdq_task_cb {
> > +	cmdq_async_flush_cb	cb;
> > +	void			*data;
> > +};
> > +
> > +struct cmdq_pkt {
> > +	void			*va_base;
> > +	dma_addr_t		pa_base;
> > +	size_t			cmd_buf_size; /* command occupied size */
> > +	size_t			buf_size; /* real buffer size */
> > +	struct cmdq_task_cb	cb;
> > +};
> > +
> > +#endif /* __MTK_CMDQ_MAILBOX_H__ */
> 
> 

[PATCH v21 2/4] mailbox: mediatek: Add Mediatek CMDQ driver

[CK Hu]

Hi, Houlong:

On Wed, 2018-06-27 at 19:53 +0800, houlong wei wrote:
> On Wed, 2018-02-21 at 11:53 +0800, CK Hu wrote:
> > Hi, Houlong:
> > 
> > I've one inline comment.
> > 
> > On Wed, 2018-01-31 at 15:28 +0800, houlong.wei at mediatek.com wrote:
> > > From: "hs.liao at mediatek.com" <hs.liao@mediatek.com>
> > > 
> > > This patch is first version of Mediatek Command Queue(CMDQ) driver. The
> > > CMDQ is used to help write registers with critical time limitation,
> > > such as updating display configuration during the vblank. It controls
> > > Global Command Engine (GCE) hardware to achieve this requirement.
> > > Currently, CMDQ only supports display related hardwares, but we expect
> > > it can be extended to other hardwares for future requirements.
> > > 
> > > Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
> > > Signed-off-by: HS Liao <hs.liao@mediatek.com>
> > > Signed-off-by: CK Hu <ck.hu@mediatek.com>
> > > ---
> > >  drivers/mailbox/Kconfig                  |   10 +
> > >  drivers/mailbox/Makefile                 |    2 +
> > >  drivers/mailbox/mtk-cmdq-mailbox.c       |  594 ++++++++++++++++++++++++++++++
> > >  include/linux/mailbox/mtk-cmdq-mailbox.h |   77 ++++
> > >  4 files changed, 683 insertions(+)
> > >  create mode 100644 drivers/mailbox/mtk-cmdq-mailbox.c
> > >  create mode 100644 include/linux/mailbox/mtk-cmdq-mailbox.h
> > > 
> > > diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
> > > index ba2f152..43bb26f 100644
> > > --- a/drivers/mailbox/Kconfig
> > > +++ b/drivers/mailbox/Kconfig
> > > @@ -171,4 +171,14 @@ config BCM_FLEXRM_MBOX
> > >  	  Mailbox implementation of the Broadcom FlexRM ring manager,
> > >  	  which provides access to various offload engines on Broadcom
> > >  	  SoCs. Say Y here if you want to use the Broadcom FlexRM.
> > > +

[...]

> > > +
> > > +static void cmdq_task_exec(struct cmdq_pkt *pkt, struct cmdq_thread *thread)
> > > +{
> > > +	struct cmdq *cmdq;
> > > +	struct cmdq_task *task;
> > > +	unsigned long curr_pa, end_pa;
> > > +
> > > +	cmdq = dev_get_drvdata(thread->chan->mbox->dev);
> > > +
> > > +	/* Client should not flush new tasks if suspended. */
> > > +	WARN_ON(cmdq->suspended);
> > > +
> > > +	task = kzalloc(sizeof(*task), GFP_ATOMIC);
> > > +	task->cmdq = cmdq;
> > > +	INIT_LIST_HEAD(&task->list_entry);
> > > +	task->pa_base = pkt->pa_base;
> > > +	task->thread = thread;
> > > +	task->pkt = pkt;
> > > +
> > > +	if (list_empty(&thread->task_busy_list)) {
> > > +		WARN_ON(clk_enable(cmdq->clock) < 0);
> > > +		WARN_ON(cmdq_thread_reset(cmdq, thread) < 0);
> > > +
> > > +		writel(task->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
> > > +		writel(task->pa_base + pkt->cmd_buf_size,
> > > +		       thread->base + CMDQ_THR_END_ADDR);
> > > +		writel(CMDQ_THR_IRQ_EN, thread->base + CMDQ_THR_IRQ_ENABLE);
> > > +		writel(CMDQ_THR_ENABLED, thread->base + CMDQ_THR_ENABLE_TASK);
> > > +
> > > +		mod_timer(&thread->timeout,
> > > +			  jiffies + msecs_to_jiffies(CMDQ_TIMEOUT_MS));
> > > +	} else {
> > > +		WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
> > > +		curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR);
> > > +		end_pa = readl(thread->base + CMDQ_THR_END_ADDR);
> > > +
> > > +		/*
> > > +		 * Atomic execution should remove the following wfe, i.e. only
> > > +		 * wait event at first task, and prevent to pause when running.
> > > +		 */
> > > +		if (thread->atomic_exec) {
> > > +			/* GCE is executing if command is not WFE */
> > > +			if (!cmdq_thread_is_in_wfe(thread)) {
> > > +				cmdq_thread_resume(thread);
> > > +				cmdq_thread_wait_end(thread, end_pa);
> > > +				WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
> > > +				/* set to this task directly */
> > > +				writel(task->pa_base,
> > > +				       thread->base + CMDQ_THR_CURR_ADDR);
> > > +			} else {
> > > +				cmdq_task_insert_into_thread(task);
> > > +				cmdq_task_remove_wfe(task);
> > > +				smp_mb(); /* modify jump before enable thread */
> > > +			}
> > > +		} else {
> > > +			/* check boundary */
> > > +			if (curr_pa == end_pa - CMDQ_INST_SIZE ||
> > > +			    curr_pa == end_pa) {
> > > +				/* set to this task directly */
> > > +				writel(task->pa_base,
> > > +				       thread->base + CMDQ_THR_CURR_ADDR);
> > > +			} else {
> > > +				cmdq_task_insert_into_thread(task);
> > > +				smp_mb(); /* modify jump before enable thread */
> > > +			}
> > > +		}
> > > +		writel(task->pa_base + pkt->cmd_buf_size,
> > > +		       thread->base + CMDQ_THR_END_ADDR);
> > > +		cmdq_thread_resume(thread);
> > > +	}
> > > +	list_move_tail(&task->list_entry, &thread->task_busy_list);
> > 
> > You implement a list to queue command because you need to execute
> > multiple packet in the same vblank period. I've a suggestion that you
> > need not to implement a list. Once cmdq driver receive two packet as
> > below:
> > 
> > Packet 1:
> > (1) clear vblank event
> > (2) wait vblank event
> > (3) write register setting 1
> > (4) no operation
> > 
> > Packet 2:
> > (1) clear vblank event
> > (2) wait vblank event
> > (3) write register setting 2
> > (4) no operation
> > 
> > In your current design, you modify these two packet as:
> > 
> > Packet 1:
> > (1) clear vblank event
> > (2) wait vblank event
> > (3) write register setting 1
> > (4) Jump to packet 2 (modified)
> > 
> > Packet 2:
> > (1) no operation (modified)
> > (2) no operation (modified)
> > (3) write register setting 2
> > (4) no operation
> > 
> > So the register setting 1 and register setting 2 could be executed in
> > the same vblank period.
> > 
> > My suggestion is: when the client want to send packet 2, it 'abort'
> > packet 1 at first. The 'abort' means remove it from channel. In current
> > mailbox interface, mbox_free_channel() is most like abort function, but
> > my abort would keep the channel. So maybe you need to implement a new
> > mailbox interface which could remove packet in the channel. So the step
> > would be:
> > 
> > (1) Client generate packet 1 which include write register setting 1
> > (2) Client send packet 1 to channel A
> > 
> > When client want to send register setting 2,
> > 
> > (3) Client abort channel A
> > (4) Client generate packet 2 which include write register setting 1 & 2
> > (5) Client send packet 2 to channel A
> > 
> > Once you have the abort function, you could use the queue mechanism in
> > mailbox core instead of implementing your own.
> > 
> > For the client which have the atomic requirement, it also need not to
> > implement a list to keep what command have not executed. So the abort
> > interface would make client and controller much simpler.
> > 
> > Regards,
> > CK
> > 
> 
> Hi CK, thanks for you suggestion. Since current mailbox framework has
> no 'abort' function and need add new interface. It may be complicated
> to do this. Could we keep current solution?
> 

I imagine that 'abort' is a simple function. Is my imagination
incorrect? So you would like choose implementing a complicated queue
mechanism in mtk_cmdq driver rather than implementing abort function.
Maybe both are complicated.

I think the more important thing is that do you and maintainer agree to
implement abort function which could reduce mtk-self-queue in mtk_cmdq
driver. If the answer is yes, there could be two patch sequence A and B,
the patch sequence A is

A.1 mtk_cmdq driver with mtk-self-queue.
A.2 mtk display driver use mtk_cmdq without abort function.
A.3 add mailbox abort function
A.4 mtk_cmdq driver support abort function and remove mtk-self-queue.
A.5 mtk display driver use mtk_cmdq with abort function

And the patch sequence B is

B.1 add mailbox abort function
B.2 mtk_cmdq driver with abort function and no mtk-self-queue
B.3 mtk display driver use mtk_cmdq with abort function

Which one do you think is complicated?

So let's back to the more important thing: 'do you agree to implement
abort function which could reduce mtk-self-queue in mtk_cmdq driver?'

Regards,
CK

> > > +}
> > > +

[...]

> 

[PATCH v21 2/4] mailbox: mediatek: Add Mediatek CMDQ driver

[houlong wei]

On Thu, 2018-06-28 at 09:57 +0800, CK Hu wrote:
> Hi, Houlong:
> 
> On Wed, 2018-06-27 at 19:53 +0800, houlong wei wrote:
> > On Wed, 2018-02-21 at 11:53 +0800, CK Hu wrote:
> > > Hi, Houlong:
> > > 
> > > I've one inline comment.
> > > 
> > > On Wed, 2018-01-31 at 15:28 +0800, houlong.wei at mediatek.com wrote:
> > > > From: "hs.liao at mediatek.com" <hs.liao@mediatek.com>
> > > > 
> > > > This patch is first version of Mediatek Command Queue(CMDQ) driver. The
> > > > CMDQ is used to help write registers with critical time limitation,
> > > > such as updating display configuration during the vblank. It controls
> > > > Global Command Engine (GCE) hardware to achieve this requirement.
> > > > Currently, CMDQ only supports display related hardwares, but we expect
> > > > it can be extended to other hardwares for future requirements.
> > > > 
> > > > Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
> > > > Signed-off-by: HS Liao <hs.liao@mediatek.com>
> > > > Signed-off-by: CK Hu <ck.hu@mediatek.com>
> > > > ---
> > > >  drivers/mailbox/Kconfig                  |   10 +
> > > >  drivers/mailbox/Makefile                 |    2 +
> > > >  drivers/mailbox/mtk-cmdq-mailbox.c       |  594 ++++++++++++++++++++++++++++++
> > > >  include/linux/mailbox/mtk-cmdq-mailbox.h |   77 ++++
> > > >  4 files changed, 683 insertions(+)
> > > >  create mode 100644 drivers/mailbox/mtk-cmdq-mailbox.c
> > > >  create mode 100644 include/linux/mailbox/mtk-cmdq-mailbox.h
> > > > 
> > > > diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
> > > > index ba2f152..43bb26f 100644
> > > > --- a/drivers/mailbox/Kconfig
> > > > +++ b/drivers/mailbox/Kconfig
> > > > @@ -171,4 +171,14 @@ config BCM_FLEXRM_MBOX
> > > >  	  Mailbox implementation of the Broadcom FlexRM ring manager,
> > > >  	  which provides access to various offload engines on Broadcom
> > > >  	  SoCs. Say Y here if you want to use the Broadcom FlexRM.
> > > > +
> 
> [...]
> 
> > > > +
> > > > +static void cmdq_task_exec(struct cmdq_pkt *pkt, struct cmdq_thread *thread)
> > > > +{
> > > > +	struct cmdq *cmdq;
> > > > +	struct cmdq_task *task;
> > > > +	unsigned long curr_pa, end_pa;
> > > > +
> > > > +	cmdq = dev_get_drvdata(thread->chan->mbox->dev);
> > > > +
> > > > +	/* Client should not flush new tasks if suspended. */
> > > > +	WARN_ON(cmdq->suspended);
> > > > +
> > > > +	task = kzalloc(sizeof(*task), GFP_ATOMIC);
> > > > +	task->cmdq = cmdq;
> > > > +	INIT_LIST_HEAD(&task->list_entry);
> > > > +	task->pa_base = pkt->pa_base;
> > > > +	task->thread = thread;
> > > > +	task->pkt = pkt;
> > > > +
> > > > +	if (list_empty(&thread->task_busy_list)) {
> > > > +		WARN_ON(clk_enable(cmdq->clock) < 0);
> > > > +		WARN_ON(cmdq_thread_reset(cmdq, thread) < 0);
> > > > +
> > > > +		writel(task->pa_base, thread->base + CMDQ_THR_CURR_ADDR);
> > > > +		writel(task->pa_base + pkt->cmd_buf_size,
> > > > +		       thread->base + CMDQ_THR_END_ADDR);
> > > > +		writel(CMDQ_THR_IRQ_EN, thread->base + CMDQ_THR_IRQ_ENABLE);
> > > > +		writel(CMDQ_THR_ENABLED, thread->base + CMDQ_THR_ENABLE_TASK);
> > > > +
> > > > +		mod_timer(&thread->timeout,
> > > > +			  jiffies + msecs_to_jiffies(CMDQ_TIMEOUT_MS));
> > > > +	} else {
> > > > +		WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
> > > > +		curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR);
> > > > +		end_pa = readl(thread->base + CMDQ_THR_END_ADDR);
> > > > +
> > > > +		/*
> > > > +		 * Atomic execution should remove the following wfe, i.e. only
> > > > +		 * wait event at first task, and prevent to pause when running.
> > > > +		 */
> > > > +		if (thread->atomic_exec) {
> > > > +			/* GCE is executing if command is not WFE */
> > > > +			if (!cmdq_thread_is_in_wfe(thread)) {
> > > > +				cmdq_thread_resume(thread);
> > > > +				cmdq_thread_wait_end(thread, end_pa);
> > > > +				WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
> > > > +				/* set to this task directly */
> > > > +				writel(task->pa_base,
> > > > +				       thread->base + CMDQ_THR_CURR_ADDR);
> > > > +			} else {
> > > > +				cmdq_task_insert_into_thread(task);
> > > > +				cmdq_task_remove_wfe(task);
> > > > +				smp_mb(); /* modify jump before enable thread */
> > > > +			}
> > > > +		} else {
> > > > +			/* check boundary */
> > > > +			if (curr_pa == end_pa - CMDQ_INST_SIZE ||
> > > > +			    curr_pa == end_pa) {
> > > > +				/* set to this task directly */
> > > > +				writel(task->pa_base,
> > > > +				       thread->base + CMDQ_THR_CURR_ADDR);
> > > > +			} else {
> > > > +				cmdq_task_insert_into_thread(task);
> > > > +				smp_mb(); /* modify jump before enable thread */
> > > > +			}
> > > > +		}
> > > > +		writel(task->pa_base + pkt->cmd_buf_size,
> > > > +		       thread->base + CMDQ_THR_END_ADDR);
> > > > +		cmdq_thread_resume(thread);
> > > > +	}
> > > > +	list_move_tail(&task->list_entry, &thread->task_busy_list);
> > > 
> > > You implement a list to queue command because you need to execute
> > > multiple packet in the same vblank period. I've a suggestion that you
> > > need not to implement a list. Once cmdq driver receive two packet as
> > > below:
> > > 
> > > Packet 1:
> > > (1) clear vblank event
> > > (2) wait vblank event
> > > (3) write register setting 1
> > > (4) no operation
> > > 
> > > Packet 2:
> > > (1) clear vblank event
> > > (2) wait vblank event
> > > (3) write register setting 2
> > > (4) no operation
> > > 
> > > In your current design, you modify these two packet as:
> > > 
> > > Packet 1:
> > > (1) clear vblank event
> > > (2) wait vblank event
> > > (3) write register setting 1
> > > (4) Jump to packet 2 (modified)
> > > 
> > > Packet 2:
> > > (1) no operation (modified)
> > > (2) no operation (modified)
> > > (3) write register setting 2
> > > (4) no operation
> > > 
> > > So the register setting 1 and register setting 2 could be executed in
> > > the same vblank period.
> > > 
> > > My suggestion is: when the client want to send packet 2, it 'abort'
> > > packet 1 at first. The 'abort' means remove it from channel. In current
> > > mailbox interface, mbox_free_channel() is most like abort function, but
> > > my abort would keep the channel. So maybe you need to implement a new
> > > mailbox interface which could remove packet in the channel. So the step
> > > would be:
> > > 
> > > (1) Client generate packet 1 which include write register setting 1
> > > (2) Client send packet 1 to channel A
> > > 
> > > When client want to send register setting 2,
> > > 
> > > (3) Client abort channel A
> > > (4) Client generate packet 2 which include write register setting 1 & 2
> > > (5) Client send packet 2 to channel A
> > > 
> > > Once you have the abort function, you could use the queue mechanism in
> > > mailbox core instead of implementing your own.
> > > 
> > > For the client which have the atomic requirement, it also need not to
> > > implement a list to keep what command have not executed. So the abort
> > > interface would make client and controller much simpler.
> > > 
> > > Regards,
> > > CK
> > > 
> > 
> > Hi CK, thanks for you suggestion. Since current mailbox framework has
> > no 'abort' function and need add new interface. It may be complicated
> > to do this. Could we keep current solution?
> > 
> 
> I imagine that 'abort' is a simple function. Is my imagination
> incorrect? So you would like choose implementing a complicated queue
> mechanism in mtk_cmdq driver rather than implementing abort function.
> Maybe both are complicated.
> 
> I think the more important thing is that do you and maintainer agree to
> implement abort function which could reduce mtk-self-queue in mtk_cmdq
> driver. If the answer is yes, there could be two patch sequence A and B,


Hello Jassi, what's your opinion on 'abort' function ?


> the patch sequence A is
> 
> A.1 mtk_cmdq driver with mtk-self-queue.
> A.2 mtk display driver use mtk_cmdq without abort function.
> A.3 add mailbox abort function
> A.4 mtk_cmdq driver support abort function and remove mtk-self-queue.
> A.5 mtk display driver use mtk_cmdq with abort function
> 
> And the patch sequence B is
> 
> B.1 add mailbox abort function
> B.2 mtk_cmdq driver with abort function and no mtk-self-queue
> B.3 mtk display driver use mtk_cmdq with abort function
> 
> Which one do you think is complicated?
> 
> So let's back to the more important thing: 'do you agree to implement
> abort function which could reduce mtk-self-queue in mtk_cmdq driver?'
> 
> Regards,
> CK
> 
> > > > +}
> > > > +
> 
> [...]
> 
> > 
> 
> 

[PATCH v21 3/4] arm64: dts: mt8173: Add GCE node

[houlong.wei at mediatek.com]

From: "hs.liao@mediatek.com" <hs.liao@mediatek.com>

This patch adds the device node of the GCE hardware for CMDQ module.

Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: HS Liao <hs.liao@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi |   10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 26396ef..51c3d6e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -427,6 +427,16 @@
 			status = "disabled";
 		};
 
+		gce: gce at 10212000 {
+			compatible = "mediatek,mt8173-gce";
+			reg = <0 0x10212000 0 0x1000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_GCE>;
+			clock-names = "gce";
+
+			#mbox-cells = <2>;
+		};
+
 		mipi_tx0: mipi-dphy at 10215000 {
 			compatible = "mediatek,mt8173-mipi-tx";
 			reg = <0 0x10215000 0 0x1000>;
-- 
1.7.9.5

[PATCH v21 4/4] soc: mediatek: Add Mediatek CMDQ helper

[houlong.wei at mediatek.com]

From: "hs.liao@mediatek.com" <hs.liao@mediatek.com>

Add Mediatek CMDQ helper to create CMDQ packet and assemble GCE op code.

Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: HS Liao <hs.liao@mediatek.com>
---
 drivers/soc/mediatek/Kconfig           |   12 ++
 drivers/soc/mediatek/Makefile          |    1 +
 drivers/soc/mediatek/mtk-cmdq-helper.c |  322 ++++++++++++++++++++++++++++++++
 include/linux/soc/mediatek/mtk-cmdq.h  |  174 +++++++++++++++++
 4 files changed, 509 insertions(+)
 create mode 100644 drivers/soc/mediatek/mtk-cmdq-helper.c
 create mode 100644 include/linux/soc/mediatek/mtk-cmdq.h

diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
index a7d0667..e66582e 100644
--- a/drivers/soc/mediatek/Kconfig
+++ b/drivers/soc/mediatek/Kconfig
@@ -4,6 +4,18 @@
 menu "MediaTek SoC drivers"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 
+config MTK_CMDQ
+	bool "MediaTek CMDQ Support"
+	depends on ARM64 && ( ARCH_MEDIATEK || COMPILE_TEST )
+	select MAILBOX
+	select MTK_CMDQ_MBOX
+	select MTK_INFRACFG
+	help
+	  Say yes here to add support for the MediaTek Command Queue (CMDQ)
+	  driver. The CMDQ is used to help read/write registers with critical
+	  time limitation, such as updating display configuration during the
+	  vblank.
+
 config MTK_INFRACFG
 	bool "MediaTek INFRACFG Support"
 	select REGMAP
diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
index 12998b0..64ce5ee 100644
--- a/drivers/soc/mediatek/Makefile
+++ b/drivers/soc/mediatek/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o
 obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
 obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
 obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
new file mode 100644
index 0000000..80d0558
--- /dev/null
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -0,0 +1,322 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/completion.h>
+#include <linux/errno.h>
+#include <linux/of_address.h>
+#include <linux/dma-mapping.h>
+#include <linux/mailbox_controller.h>
+#include <linux/soc/mediatek/mtk-cmdq.h>
+
+#define CMDQ_ARG_A_WRITE_MASK	0xffff
+#define CMDQ_WRITE_ENABLE_MASK	BIT(0)
+#define CMDQ_EOC_IRQ_EN		BIT(0)
+#define CMDQ_EOC_CMD		((u64)((CMDQ_CODE_EOC << CMDQ_OP_CODE_SHIFT)) \
+				<< 32 | CMDQ_EOC_IRQ_EN)
+
+struct cmdq_subsys {
+	u32	base;
+	int	id;
+};
+
+static const struct cmdq_subsys gce_subsys[] = {
+	{0x1400, 1},
+	{0x1401, 2},
+	{0x1402, 3},
+};
+
+static int cmdq_subsys_base_to_id(u32 base)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(gce_subsys); i++)
+		if (gce_subsys[i].base == base)
+			return gce_subsys[i].id;
+	return -EFAULT;
+}
+
+static int cmdq_pkt_realloc_cmd_buffer(struct cmdq_pkt *pkt, size_t size)
+{
+	void *new_buf;
+
+	new_buf = krealloc(pkt->va_base, size, GFP_KERNEL | __GFP_ZERO);
+	if (!new_buf)
+		return -ENOMEM;
+	pkt->va_base = new_buf;
+	pkt->buf_size = size;
+	return 0;
+}
+
+struct cmdq_base *cmdq_register_device(struct device *dev)
+{
+	struct cmdq_base *cmdq_base;
+	struct resource res;
+	int subsys;
+	u32 base;
+
+	if (of_address_to_resource(dev->of_node, 0, &res))
+		return NULL;
+	base = (u32)res.start;
+
+	subsys = cmdq_subsys_base_to_id(base >> 16);
+	if (subsys < 0)
+		return NULL;
+
+	cmdq_base = devm_kmalloc(dev, sizeof(*cmdq_base), GFP_KERNEL);
+	if (!cmdq_base)
+		return NULL;
+	cmdq_base->subsys = subsys;
+	cmdq_base->base = base;
+
+	return cmdq_base;
+}
+EXPORT_SYMBOL(cmdq_register_device);
+
+struct cmdq_client *cmdq_mbox_create(struct device *dev, int index)
+{
+	struct cmdq_client *client;
+
+	client = kzalloc(sizeof(*client), GFP_KERNEL);
+	client->client.dev = dev;
+	client->client.tx_block = false;
+	client->chan = mbox_request_channel(&client->client, index);
+	return client;
+}
+EXPORT_SYMBOL(cmdq_mbox_create);
+
+void cmdq_mbox_destroy(struct cmdq_client *client)
+{
+	mbox_free_channel(client->chan);
+	kfree(client);
+}
+EXPORT_SYMBOL(cmdq_mbox_destroy);
+
+int cmdq_pkt_create(struct cmdq_pkt **pkt_ptr)
+{
+	struct cmdq_pkt *pkt;
+	int err;
+
+	pkt = kzalloc(sizeof(*pkt), GFP_KERNEL);
+	if (!pkt)
+		return -ENOMEM;
+	err = cmdq_pkt_realloc_cmd_buffer(pkt, PAGE_SIZE);
+	if (err < 0) {
+		kfree(pkt);
+		return err;
+	}
+	*pkt_ptr = pkt;
+	return 0;
+}
+EXPORT_SYMBOL(cmdq_pkt_create);
+
+void cmdq_pkt_destroy(struct cmdq_pkt *pkt)
+{
+	kfree(pkt->va_base);
+	kfree(pkt);
+}
+EXPORT_SYMBOL(cmdq_pkt_destroy);
+
+static bool cmdq_pkt_is_finalized(struct cmdq_pkt *pkt)
+{
+	u64 *expect_eoc;
+
+	if (pkt->cmd_buf_size < CMDQ_INST_SIZE << 1)
+		return false;
+
+	expect_eoc = pkt->va_base + pkt->cmd_buf_size - (CMDQ_INST_SIZE << 1);
+	if (*expect_eoc == CMDQ_EOC_CMD)
+		return true;
+
+	return false;
+}
+
+static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
+				   u32 arg_a, u32 arg_b)
+{
+	u64 *cmd_ptr;
+	int err;
+
+	if (WARN_ON(cmdq_pkt_is_finalized(pkt)))
+		return -EBUSY;
+	if (unlikely(pkt->cmd_buf_size + CMDQ_INST_SIZE > pkt->buf_size)) {
+		err = cmdq_pkt_realloc_cmd_buffer(pkt, pkt->buf_size << 1);
+		if (err < 0)
+			return err;
+	}
+	cmd_ptr = pkt->va_base + pkt->cmd_buf_size;
+	(*cmd_ptr) = (u64)((code << CMDQ_OP_CODE_SHIFT) | arg_a) << 32 | arg_b;
+	pkt->cmd_buf_size += CMDQ_INST_SIZE;
+	return 0;
+}
+
+int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, struct cmdq_base *base,
+		   u32 offset)
+{
+	u32 arg_a = ((base->base + offset) & CMDQ_ARG_A_WRITE_MASK) |
+		    (base->subsys << CMDQ_SUBSYS_SHIFT);
+	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WRITE, arg_a, value);
+}
+EXPORT_SYMBOL(cmdq_pkt_write);
+
+int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
+			struct cmdq_base *base, u32 offset, u32 mask)
+{
+	u32 offset_mask = offset;
+	int err;
+
+	if (mask != 0xffffffff) {
+		err = cmdq_pkt_append_command(pkt, CMDQ_CODE_MASK, 0, ~mask);
+		if (err < 0)
+			return err;
+		offset_mask |= CMDQ_WRITE_ENABLE_MASK;
+	}
+	return cmdq_pkt_write(pkt, value, base, offset_mask);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_mask);
+
+static const u32 cmdq_event_value[CMDQ_MAX_EVENT] = {
+	/* Display start of frame(SOF) events */
+	[CMDQ_EVENT_DISP_OVL0_SOF] = 11,
+	[CMDQ_EVENT_DISP_OVL1_SOF] = 12,
+	[CMDQ_EVENT_DISP_RDMA0_SOF] = 13,
+	[CMDQ_EVENT_DISP_RDMA1_SOF] = 14,
+	[CMDQ_EVENT_DISP_RDMA2_SOF] = 15,
+	[CMDQ_EVENT_DISP_WDMA0_SOF] = 16,
+	[CMDQ_EVENT_DISP_WDMA1_SOF] = 17,
+	/* Display end of frame(EOF) events */
+	[CMDQ_EVENT_DISP_OVL0_EOF] = 39,
+	[CMDQ_EVENT_DISP_OVL1_EOF] = 40,
+	[CMDQ_EVENT_DISP_RDMA0_EOF] = 41,
+	[CMDQ_EVENT_DISP_RDMA1_EOF] = 42,
+	[CMDQ_EVENT_DISP_RDMA2_EOF] = 43,
+	[CMDQ_EVENT_DISP_WDMA0_EOF] = 44,
+	[CMDQ_EVENT_DISP_WDMA1_EOF] = 45,
+	/* Mutex end of frame(EOF) events */
+	[CMDQ_EVENT_MUTEX0_STREAM_EOF] = 53,
+	[CMDQ_EVENT_MUTEX1_STREAM_EOF] = 54,
+	[CMDQ_EVENT_MUTEX2_STREAM_EOF] = 55,
+	[CMDQ_EVENT_MUTEX3_STREAM_EOF] = 56,
+	[CMDQ_EVENT_MUTEX4_STREAM_EOF] = 57,
+	/* Display underrun events */
+	[CMDQ_EVENT_DISP_RDMA0_UNDERRUN] = 63,
+	[CMDQ_EVENT_DISP_RDMA1_UNDERRUN] = 64,
+	[CMDQ_EVENT_DISP_RDMA2_UNDERRUN] = 65,
+};
+
+int cmdq_pkt_wfe(struct cmdq_pkt *pkt, enum cmdq_event event)
+{
+	u32 arg_b;
+
+	if (event >= CMDQ_MAX_EVENT || event < 0)
+		return -EINVAL;
+
+	/*
+	 * WFE arg_b
+	 * bit 0-11: wait value
+	 * bit 15: 1 - wait, 0 - no wait
+	 * bit 16-27: update value
+	 * bit 31: 1 - update, 0 - no update
+	 */
+	arg_b = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
+	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE,
+			cmdq_event_value[event], arg_b);
+}
+EXPORT_SYMBOL(cmdq_pkt_wfe);
+
+int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, enum cmdq_event event)
+{
+	if (event >= CMDQ_MAX_EVENT || event < 0)
+		return -EINVAL;
+
+	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE,
+			cmdq_event_value[event], CMDQ_WFE_UPDATE);
+}
+EXPORT_SYMBOL(cmdq_pkt_clear_event);
+
+static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
+{
+	int err;
+
+	if (cmdq_pkt_is_finalized(pkt))
+		return 0;
+
+	/* insert EOC and generate IRQ for each command iteration */
+	err = cmdq_pkt_append_command(pkt, CMDQ_CODE_EOC, 0, CMDQ_EOC_IRQ_EN);
+	if (err < 0)
+		return err;
+
+	/* JUMP to end */
+	err = cmdq_pkt_append_command(pkt, CMDQ_CODE_JUMP, 0, CMDQ_JUMP_PASS);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+int cmdq_pkt_flush_async(struct cmdq_client *client, struct cmdq_pkt *pkt,
+			 cmdq_async_flush_cb cb, void *data)
+{
+	int err;
+	struct device *dev;
+	dma_addr_t dma_addr;
+
+	err = cmdq_pkt_finalize(pkt);
+	if (err < 0)
+		return err;
+
+	dev = client->chan->mbox->dev;
+	dma_addr = dma_map_single(dev, pkt->va_base, pkt->cmd_buf_size,
+		DMA_TO_DEVICE);
+	if (dma_mapping_error(dev, dma_addr)) {
+		dev_err(client->chan->mbox->dev, "dma map failed\n");
+		return -ENOMEM;
+	}
+
+	pkt->pa_base = dma_addr;
+	pkt->cb.cb = cb;
+	pkt->cb.data = data;
+
+	mbox_send_message(client->chan, pkt);
+	/* We can send next packet immediately, so just call txdone. */
+	mbox_client_txdone(client->chan, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL(cmdq_pkt_flush_async);
+
+struct cmdq_flush_completion {
+	struct completion cmplt;
+	bool err;
+};
+
+static void cmdq_pkt_flush_cb(struct cmdq_cb_data data)
+{
+	struct cmdq_flush_completion *cmplt = data.data;
+
+	cmplt->err = data.err;
+	complete(&cmplt->cmplt);
+}
+
+int cmdq_pkt_flush(struct cmdq_client *client, struct cmdq_pkt *pkt)
+{
+	struct cmdq_flush_completion cmplt;
+	int err;
+
+	init_completion(&cmplt.cmplt);
+	err = cmdq_pkt_flush_async(client, pkt, cmdq_pkt_flush_cb, &cmplt);
+	if (err < 0)
+		return err;
+	wait_for_completion(&cmplt.cmplt);
+	return cmplt.err ? -EFAULT : 0;
+}
+EXPORT_SYMBOL(cmdq_pkt_flush);
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
new file mode 100644
index 0000000..5b35d73
--- /dev/null
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -0,0 +1,174 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MTK_CMDQ_H__
+#define __MTK_CMDQ_H__
+
+#include <linux/mailbox_client.h>
+#include <linux/mailbox/mtk-cmdq-mailbox.h>
+
+/* display events in command queue(CMDQ) */
+enum cmdq_event {
+	/* Display start of frame(SOF) events */
+	CMDQ_EVENT_DISP_OVL0_SOF,
+	CMDQ_EVENT_DISP_OVL1_SOF,
+	CMDQ_EVENT_DISP_RDMA0_SOF,
+	CMDQ_EVENT_DISP_RDMA1_SOF,
+	CMDQ_EVENT_DISP_RDMA2_SOF,
+	CMDQ_EVENT_DISP_WDMA0_SOF,
+	CMDQ_EVENT_DISP_WDMA1_SOF,
+	/* Display end of frame(EOF) events */
+	CMDQ_EVENT_DISP_OVL0_EOF,
+	CMDQ_EVENT_DISP_OVL1_EOF,
+	CMDQ_EVENT_DISP_RDMA0_EOF,
+	CMDQ_EVENT_DISP_RDMA1_EOF,
+	CMDQ_EVENT_DISP_RDMA2_EOF,
+	CMDQ_EVENT_DISP_WDMA0_EOF,
+	CMDQ_EVENT_DISP_WDMA1_EOF,
+	/* Mutex end of frame(EOF) events */
+	CMDQ_EVENT_MUTEX0_STREAM_EOF,
+	CMDQ_EVENT_MUTEX1_STREAM_EOF,
+	CMDQ_EVENT_MUTEX2_STREAM_EOF,
+	CMDQ_EVENT_MUTEX3_STREAM_EOF,
+	CMDQ_EVENT_MUTEX4_STREAM_EOF,
+	/* Display underrun events */
+	CMDQ_EVENT_DISP_RDMA0_UNDERRUN,
+	CMDQ_EVENT_DISP_RDMA1_UNDERRUN,
+	CMDQ_EVENT_DISP_RDMA2_UNDERRUN,
+	/* Keep this at the end */
+	CMDQ_MAX_EVENT,
+};
+
+struct cmdq_pkt;
+
+struct cmdq_base {
+	int	subsys;
+	u32	base;
+};
+
+struct cmdq_client {
+	struct mbox_client client;
+	struct mbox_chan *chan;
+};
+
+/**
+ * cmdq_register_device() - register device which needs CMDQ
+ * @dev:	device for CMDQ to access its registers
+ *
+ * Return: cmdq_base pointer or NULL for failed
+ */
+struct cmdq_base *cmdq_register_device(struct device *dev);
+
+/**
+ * cmdq_mbox_create() - create CMDQ mailbox client and channel
+ * @dev:	device of CMDQ mailbox client
+ * @index:	index of CMDQ mailbox channel
+ *
+ * Return: CMDQ mailbox client pointer
+ */
+struct cmdq_client *cmdq_mbox_create(struct device *dev, int index);
+
+/**
+ * cmdq_mbox_destroy() - destroy CMDQ mailbox client and channel
+ * @client:	the CMDQ mailbox client
+ */
+void cmdq_mbox_destroy(struct cmdq_client *client);
+
+/**
+ * cmdq_pkt_create() - create a CMDQ packet
+ * @pkt_ptr:	CMDQ packet pointer to retrieve cmdq_pkt
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_create(struct cmdq_pkt **pkt_ptr);
+
+/**
+ * cmdq_pkt_destroy() - destroy the CMDQ packet
+ * @pkt:	the CMDQ packet
+ */
+void cmdq_pkt_destroy(struct cmdq_pkt *pkt);
+
+/**
+ * cmdq_pkt_write() - append write command to the CMDQ packet
+ * @pkt:	the CMDQ packet
+ * @value:	the specified target register value
+ * @base:	the CMDQ base
+ * @offset:	register offset from module base
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value,
+		   struct cmdq_base *base, u32 offset);
+
+/**
+ * cmdq_pkt_write_mask() - append write command with mask to the CMDQ packet
+ * @pkt:	the CMDQ packet
+ * @value:	the specified target register value
+ * @base:	the CMDQ base
+ * @offset:	register offset from module base
+ * @mask:	the specified target register mask
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
+			struct cmdq_base *base, u32 offset, u32 mask);
+
+/**
+ * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
+ * @pkt:	the CMDQ packet
+ * @event:	the desired event type to "wait and CLEAR"
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_wfe(struct cmdq_pkt *pkt, enum cmdq_event event);
+
+/**
+ * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
+ * @pkt:	the CMDQ packet
+ * @event:	the desired event to be cleared
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, enum cmdq_event event);
+
+/**
+ * cmdq_pkt_flush() - trigger CMDQ to execute the CMDQ packet
+ * @client:	the CMDQ mailbox client
+ * @pkt:	the CMDQ packet
+ *
+ * Return: 0 for success; else the error code is returned
+ *
+ * Trigger CMDQ to execute the CMDQ packet. Note that this is a
+ * synchronous flush function. When the function returned, the recorded
+ * commands have been done.
+ */
+int cmdq_pkt_flush(struct cmdq_client *client, struct cmdq_pkt *pkt);
+
+/**
+ * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
+ *                          packet and call back at the end of done packet
+ * @client:	the CMDQ mailbox client
+ * @pkt:	the CMDQ packet
+ * @cb:		called at the end of done packet
+ * @data:	this data will pass back to cb
+ *
+ * Return: 0 for success; else the error code is returned
+ *
+ * Trigger CMDQ to asynchronously execute the CMDQ packet and call back
+ * at the end of done packet. Note that this is an ASYNC function. When the
+ * function returned, it may or may not be finished.
+ */
+int cmdq_pkt_flush_async(struct cmdq_client *client, struct cmdq_pkt *pkt,
+			 cmdq_async_flush_cb cb, void *data);
+
+#endif	/* __MTK_CMDQ_H__ */
-- 
1.7.9.5

[PATCH v21 4/4] soc: mediatek: Add Mediatek CMDQ helper

[CK Hu]

Hi, Houlong:

I've some inline comment.

On Wed, 2018-01-31 at 15:28 +0800, houlong.wei at mediatek.com wrote:
> From: "hs.liao at mediatek.com" <hs.liao@mediatek.com>
> 
> Add Mediatek CMDQ helper to create CMDQ packet and assemble GCE op code.
> 
> Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
> Signed-off-by: HS Liao <hs.liao@mediatek.com>
> ---
>  drivers/soc/mediatek/Kconfig           |   12 ++
>  drivers/soc/mediatek/Makefile          |    1 +
>  drivers/soc/mediatek/mtk-cmdq-helper.c |  322 ++++++++++++++++++++++++++++++++
>  include/linux/soc/mediatek/mtk-cmdq.h  |  174 +++++++++++++++++
>  4 files changed, 509 insertions(+)
>  create mode 100644 drivers/soc/mediatek/mtk-cmdq-helper.c
>  create mode 100644 include/linux/soc/mediatek/mtk-cmdq.h
> 
> diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> index a7d0667..e66582e 100644
> --- a/drivers/soc/mediatek/Kconfig
> +++ b/drivers/soc/mediatek/Kconfig
> @@ -4,6 +4,18 @@
>  menu "MediaTek SoC drivers"
>  	depends on ARCH_MEDIATEK || COMPILE_TEST
>  
> +config MTK_CMDQ
> +	bool "MediaTek CMDQ Support"
> +	depends on ARM64 && ( ARCH_MEDIATEK || COMPILE_TEST )
> +	select MAILBOX
> +	select MTK_CMDQ_MBOX
> +	select MTK_INFRACFG
> +	help
> +	  Say yes here to add support for the MediaTek Command Queue (CMDQ)
> +	  driver. The CMDQ is used to help read/write registers with critical
> +	  time limitation, such as updating display configuration during the
> +	  vblank.
> +
>  config MTK_INFRACFG
>  	bool "MediaTek INFRACFG Support"
>  	select REGMAP
> diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> index 12998b0..64ce5ee 100644
> --- a/drivers/soc/mediatek/Makefile
> +++ b/drivers/soc/mediatek/Makefile
> @@ -1,3 +1,4 @@
> +obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o
>  obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
>  obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
>  obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> new file mode 100644
> index 0000000..80d0558
> --- /dev/null
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -0,0 +1,322 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/completion.h>
> +#include <linux/errno.h>
> +#include <linux/of_address.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/mailbox_controller.h>
> +#include <linux/soc/mediatek/mtk-cmdq.h>
> +
> +#define CMDQ_ARG_A_WRITE_MASK	0xffff
> +#define CMDQ_WRITE_ENABLE_MASK	BIT(0)
> +#define CMDQ_EOC_IRQ_EN		BIT(0)
> +#define CMDQ_EOC_CMD		((u64)((CMDQ_CODE_EOC << CMDQ_OP_CODE_SHIFT)) \
> +				<< 32 | CMDQ_EOC_IRQ_EN)
> +
> +struct cmdq_subsys {
> +	u32	base;
> +	int	id;
> +};
> +
> +static const struct cmdq_subsys gce_subsys[] = {
> +	{0x1400, 1},
> +	{0x1401, 2},
> +	{0x1402, 3},
> +};

I think subsys definition varies by different SoC, so it's better to
pass these definition from device tree to driver (client driver), and
client driver pass this subsys in the related interface. For example,

in include/dt-bindings/gce/mt8173-gce.h, you define

#define GCE_SUBSYS_1400XXXX		1
#define GCE_SUBSYS_1401XXXX		2
#define GCE_SUBSYS_1402XXXX		3

in device tree, place the subsys definition in client device node,

#include "dt-bindings/gce/mt8173-gce.h"

	ovl0: ovl at 1400c000 {
		compatible = "mediatek,mt8173-disp-ovl";
		gce-subsys = <GCE_SUBSYS_1400XXXX>;
		...
	};

And client driver pass subsys in the related interface,

int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32
value);

So, for another SoC, you just need to modify device tree and you do not
need to modify driver.

> +
> +static int cmdq_subsys_base_to_id(u32 base)
> +{
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(gce_subsys); i++)
> +		if (gce_subsys[i].base == base)
> +			return gce_subsys[i].id;
> +	return -EFAULT;
> +}
> +
> +static int cmdq_pkt_realloc_cmd_buffer(struct cmdq_pkt *pkt, size_t size)
> +{
> +	void *new_buf;
> +
> +	new_buf = krealloc(pkt->va_base, size, GFP_KERNEL | __GFP_ZERO);
> +	if (!new_buf)
> +		return -ENOMEM;
> +	pkt->va_base = new_buf;
> +	pkt->buf_size = size;
> +	return 0;
> +}
> +
> +struct cmdq_base *cmdq_register_device(struct device *dev)
> +{
> +	struct cmdq_base *cmdq_base;
> +	struct resource res;
> +	int subsys;
> +	u32 base;
> +
> +	if (of_address_to_resource(dev->of_node, 0, &res))
> +		return NULL;
> +	base = (u32)res.start;
> +
> +	subsys = cmdq_subsys_base_to_id(base >> 16);
> +	if (subsys < 0)
> +		return NULL;
> +
> +	cmdq_base = devm_kmalloc(dev, sizeof(*cmdq_base), GFP_KERNEL);
> +	if (!cmdq_base)
> +		return NULL;
> +	cmdq_base->subsys = subsys;
> +	cmdq_base->base = base;
> +
> +	return cmdq_base;
> +}
> +EXPORT_SYMBOL(cmdq_register_device);
> +
> +struct cmdq_client *cmdq_mbox_create(struct device *dev, int index)
> +{
> +	struct cmdq_client *client;
> +
> +	client = kzalloc(sizeof(*client), GFP_KERNEL);
> +	client->client.dev = dev;
> +	client->client.tx_block = false;
> +	client->chan = mbox_request_channel(&client->client, index);
> +	return client;
> +}
> +EXPORT_SYMBOL(cmdq_mbox_create);
> +
> +void cmdq_mbox_destroy(struct cmdq_client *client)
> +{
> +	mbox_free_channel(client->chan);
> +	kfree(client);
> +}
> +EXPORT_SYMBOL(cmdq_mbox_destroy);
> +
> +int cmdq_pkt_create(struct cmdq_pkt **pkt_ptr)
> +{
> +	struct cmdq_pkt *pkt;
> +	int err;
> +
> +	pkt = kzalloc(sizeof(*pkt), GFP_KERNEL);
> +	if (!pkt)
> +		return -ENOMEM;
> +	err = cmdq_pkt_realloc_cmd_buffer(pkt, PAGE_SIZE);
> +	if (err < 0) {
> +		kfree(pkt);
> +		return err;
> +	}
> +	*pkt_ptr = pkt;
> +	return 0;
> +}
> +EXPORT_SYMBOL(cmdq_pkt_create);
> +
> +void cmdq_pkt_destroy(struct cmdq_pkt *pkt)
> +{
> +	kfree(pkt->va_base);
> +	kfree(pkt);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_destroy);
> +
> +static bool cmdq_pkt_is_finalized(struct cmdq_pkt *pkt)
> +{
> +	u64 *expect_eoc;
> +
> +	if (pkt->cmd_buf_size < CMDQ_INST_SIZE << 1)
> +		return false;
> +
> +	expect_eoc = pkt->va_base + pkt->cmd_buf_size - (CMDQ_INST_SIZE << 1);
> +	if (*expect_eoc == CMDQ_EOC_CMD)
> +		return true;
> +
> +	return false;
> +}
> +
> +static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
> +				   u32 arg_a, u32 arg_b)
> +{
> +	u64 *cmd_ptr;
> +	int err;
> +
> +	if (WARN_ON(cmdq_pkt_is_finalized(pkt)))
> +		return -EBUSY;
> +	if (unlikely(pkt->cmd_buf_size + CMDQ_INST_SIZE > pkt->buf_size)) {
> +		err = cmdq_pkt_realloc_cmd_buffer(pkt, pkt->buf_size << 1);
> +		if (err < 0)
> +			return err;
> +	}
> +	cmd_ptr = pkt->va_base + pkt->cmd_buf_size;
> +	(*cmd_ptr) = (u64)((code << CMDQ_OP_CODE_SHIFT) | arg_a) << 32 | arg_b;
> +	pkt->cmd_buf_size += CMDQ_INST_SIZE;
> +	return 0;
> +}
> +
> +int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, struct cmdq_base *base,
> +		   u32 offset)
> +{
> +	u32 arg_a = ((base->base + offset) & CMDQ_ARG_A_WRITE_MASK) |
> +		    (base->subsys << CMDQ_SUBSYS_SHIFT);
> +	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WRITE, arg_a, value);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_write);
> +
> +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> +			struct cmdq_base *base, u32 offset, u32 mask)
> +{
> +	u32 offset_mask = offset;
> +	int err;
> +
> +	if (mask != 0xffffffff) {
> +		err = cmdq_pkt_append_command(pkt, CMDQ_CODE_MASK, 0, ~mask);
> +		if (err < 0)
> +			return err;
> +		offset_mask |= CMDQ_WRITE_ENABLE_MASK;
> +	}
> +	return cmdq_pkt_write(pkt, value, base, offset_mask);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_write_mask);
> +
> +static const u32 cmdq_event_value[CMDQ_MAX_EVENT] = {
> +	/* Display start of frame(SOF) events */
> +	[CMDQ_EVENT_DISP_OVL0_SOF] = 11,
> +	[CMDQ_EVENT_DISP_OVL1_SOF] = 12,
> +	[CMDQ_EVENT_DISP_RDMA0_SOF] = 13,
> +	[CMDQ_EVENT_DISP_RDMA1_SOF] = 14,
> +	[CMDQ_EVENT_DISP_RDMA2_SOF] = 15,
> +	[CMDQ_EVENT_DISP_WDMA0_SOF] = 16,
> +	[CMDQ_EVENT_DISP_WDMA1_SOF] = 17,
> +	/* Display end of frame(EOF) events */
> +	[CMDQ_EVENT_DISP_OVL0_EOF] = 39,
> +	[CMDQ_EVENT_DISP_OVL1_EOF] = 40,
> +	[CMDQ_EVENT_DISP_RDMA0_EOF] = 41,
> +	[CMDQ_EVENT_DISP_RDMA1_EOF] = 42,
> +	[CMDQ_EVENT_DISP_RDMA2_EOF] = 43,
> +	[CMDQ_EVENT_DISP_WDMA0_EOF] = 44,
> +	[CMDQ_EVENT_DISP_WDMA1_EOF] = 45,
> +	/* Mutex end of frame(EOF) events */
> +	[CMDQ_EVENT_MUTEX0_STREAM_EOF] = 53,
> +	[CMDQ_EVENT_MUTEX1_STREAM_EOF] = 54,
> +	[CMDQ_EVENT_MUTEX2_STREAM_EOF] = 55,
> +	[CMDQ_EVENT_MUTEX3_STREAM_EOF] = 56,
> +	[CMDQ_EVENT_MUTEX4_STREAM_EOF] = 57,
> +	/* Display underrun events */
> +	[CMDQ_EVENT_DISP_RDMA0_UNDERRUN] = 63,
> +	[CMDQ_EVENT_DISP_RDMA1_UNDERRUN] = 64,
> +	[CMDQ_EVENT_DISP_RDMA2_UNDERRUN] = 65,
> +};

The event is like subsys that it varies by different SoC, so it's better
to pass this information from device tree to client driver. And the wait
for event interface would become

int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)

And cmdq driver need not to translate the event value.

Regards,
CK

> +
> +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, enum cmdq_event event)
> +{
> +	u32 arg_b;
> +
> +	if (event >= CMDQ_MAX_EVENT || event < 0)
> +		return -EINVAL;
> +
> +	/*
> +	 * WFE arg_b
> +	 * bit 0-11: wait value
> +	 * bit 15: 1 - wait, 0 - no wait
> +	 * bit 16-27: update value
> +	 * bit 31: 1 - update, 0 - no update
> +	 */
> +	arg_b = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
> +	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE,
> +			cmdq_event_value[event], arg_b);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_wfe);
> +
> +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, enum cmdq_event event)
> +{
> +	if (event >= CMDQ_MAX_EVENT || event < 0)
> +		return -EINVAL;
> +
> +	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE,
> +			cmdq_event_value[event], CMDQ_WFE_UPDATE);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_clear_event);
> +
> +static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
> +{
> +	int err;
> +
> +	if (cmdq_pkt_is_finalized(pkt))
> +		return 0;
> +
> +	/* insert EOC and generate IRQ for each command iteration */
> +	err = cmdq_pkt_append_command(pkt, CMDQ_CODE_EOC, 0, CMDQ_EOC_IRQ_EN);
> +	if (err < 0)
> +		return err;
> +
> +	/* JUMP to end */
> +	err = cmdq_pkt_append_command(pkt, CMDQ_CODE_JUMP, 0, CMDQ_JUMP_PASS);
> +	if (err < 0)
> +		return err;
> +
> +	return 0;
> +}
> +
> +int cmdq_pkt_flush_async(struct cmdq_client *client, struct cmdq_pkt *pkt,
> +			 cmdq_async_flush_cb cb, void *data)
> +{
> +	int err;
> +	struct device *dev;
> +	dma_addr_t dma_addr;
> +
> +	err = cmdq_pkt_finalize(pkt);
> +	if (err < 0)
> +		return err;
> +
> +	dev = client->chan->mbox->dev;
> +	dma_addr = dma_map_single(dev, pkt->va_base, pkt->cmd_buf_size,
> +		DMA_TO_DEVICE);
> +	if (dma_mapping_error(dev, dma_addr)) {
> +		dev_err(client->chan->mbox->dev, "dma map failed\n");
> +		return -ENOMEM;
> +	}
> +
> +	pkt->pa_base = dma_addr;
> +	pkt->cb.cb = cb;
> +	pkt->cb.data = data;
> +
> +	mbox_send_message(client->chan, pkt);
> +	/* We can send next packet immediately, so just call txdone. */
> +	mbox_client_txdone(client->chan, 0);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(cmdq_pkt_flush_async);
> +
> +struct cmdq_flush_completion {
> +	struct completion cmplt;
> +	bool err;
> +};
> +
> +static void cmdq_pkt_flush_cb(struct cmdq_cb_data data)
> +{
> +	struct cmdq_flush_completion *cmplt = data.data;
> +
> +	cmplt->err = data.err;
> +	complete(&cmplt->cmplt);
> +}
> +
> +int cmdq_pkt_flush(struct cmdq_client *client, struct cmdq_pkt *pkt)
> +{
> +	struct cmdq_flush_completion cmplt;
> +	int err;
> +
> +	init_completion(&cmplt.cmplt);
> +	err = cmdq_pkt_flush_async(client, pkt, cmdq_pkt_flush_cb, &cmplt);
> +	if (err < 0)
> +		return err;
> +	wait_for_completion(&cmplt.cmplt);
> +	return cmplt.err ? -EFAULT : 0;
> +}
> +EXPORT_SYMBOL(cmdq_pkt_flush);
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> new file mode 100644
> index 0000000..5b35d73
> --- /dev/null
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -0,0 +1,174 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __MTK_CMDQ_H__
> +#define __MTK_CMDQ_H__
> +
> +#include <linux/mailbox_client.h>
> +#include <linux/mailbox/mtk-cmdq-mailbox.h>
> +
> +/* display events in command queue(CMDQ) */
> +enum cmdq_event {
> +	/* Display start of frame(SOF) events */
> +	CMDQ_EVENT_DISP_OVL0_SOF,
> +	CMDQ_EVENT_DISP_OVL1_SOF,
> +	CMDQ_EVENT_DISP_RDMA0_SOF,
> +	CMDQ_EVENT_DISP_RDMA1_SOF,
> +	CMDQ_EVENT_DISP_RDMA2_SOF,
> +	CMDQ_EVENT_DISP_WDMA0_SOF,
> +	CMDQ_EVENT_DISP_WDMA1_SOF,
> +	/* Display end of frame(EOF) events */
> +	CMDQ_EVENT_DISP_OVL0_EOF,
> +	CMDQ_EVENT_DISP_OVL1_EOF,
> +	CMDQ_EVENT_DISP_RDMA0_EOF,
> +	CMDQ_EVENT_DISP_RDMA1_EOF,
> +	CMDQ_EVENT_DISP_RDMA2_EOF,
> +	CMDQ_EVENT_DISP_WDMA0_EOF,
> +	CMDQ_EVENT_DISP_WDMA1_EOF,
> +	/* Mutex end of frame(EOF) events */
> +	CMDQ_EVENT_MUTEX0_STREAM_EOF,
> +	CMDQ_EVENT_MUTEX1_STREAM_EOF,
> +	CMDQ_EVENT_MUTEX2_STREAM_EOF,
> +	CMDQ_EVENT_MUTEX3_STREAM_EOF,
> +	CMDQ_EVENT_MUTEX4_STREAM_EOF,
> +	/* Display underrun events */
> +	CMDQ_EVENT_DISP_RDMA0_UNDERRUN,
> +	CMDQ_EVENT_DISP_RDMA1_UNDERRUN,
> +	CMDQ_EVENT_DISP_RDMA2_UNDERRUN,
> +	/* Keep this at the end */
> +	CMDQ_MAX_EVENT,
> +};
> +
> +struct cmdq_pkt;
> +
> +struct cmdq_base {
> +	int	subsys;
> +	u32	base;
> +};
> +
> +struct cmdq_client {
> +	struct mbox_client client;
> +	struct mbox_chan *chan;
> +};
> +
> +/**
> + * cmdq_register_device() - register device which needs CMDQ
> + * @dev:	device for CMDQ to access its registers
> + *
> + * Return: cmdq_base pointer or NULL for failed
> + */
> +struct cmdq_base *cmdq_register_device(struct device *dev);
> +
> +/**
> + * cmdq_mbox_create() - create CMDQ mailbox client and channel
> + * @dev:	device of CMDQ mailbox client
> + * @index:	index of CMDQ mailbox channel
> + *
> + * Return: CMDQ mailbox client pointer
> + */
> +struct cmdq_client *cmdq_mbox_create(struct device *dev, int index);
> +
> +/**
> + * cmdq_mbox_destroy() - destroy CMDQ mailbox client and channel
> + * @client:	the CMDQ mailbox client
> + */
> +void cmdq_mbox_destroy(struct cmdq_client *client);
> +
> +/**
> + * cmdq_pkt_create() - create a CMDQ packet
> + * @pkt_ptr:	CMDQ packet pointer to retrieve cmdq_pkt
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_pkt_create(struct cmdq_pkt **pkt_ptr);
> +
> +/**
> + * cmdq_pkt_destroy() - destroy the CMDQ packet
> + * @pkt:	the CMDQ packet
> + */
> +void cmdq_pkt_destroy(struct cmdq_pkt *pkt);
> +
> +/**
> + * cmdq_pkt_write() - append write command to the CMDQ packet
> + * @pkt:	the CMDQ packet
> + * @value:	the specified target register value
> + * @base:	the CMDQ base
> + * @offset:	register offset from module base
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value,
> +		   struct cmdq_base *base, u32 offset);
> +
> +/**
> + * cmdq_pkt_write_mask() - append write command with mask to the CMDQ packet
> + * @pkt:	the CMDQ packet
> + * @value:	the specified target register value
> + * @base:	the CMDQ base
> + * @offset:	register offset from module base
> + * @mask:	the specified target register mask
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> +			struct cmdq_base *base, u32 offset, u32 mask);
> +
> +/**
> + * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
> + * @pkt:	the CMDQ packet
> + * @event:	the desired event type to "wait and CLEAR"
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, enum cmdq_event event);
> +
> +/**
> + * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
> + * @pkt:	the CMDQ packet
> + * @event:	the desired event to be cleared
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, enum cmdq_event event);
> +
> +/**
> + * cmdq_pkt_flush() - trigger CMDQ to execute the CMDQ packet
> + * @client:	the CMDQ mailbox client
> + * @pkt:	the CMDQ packet
> + *
> + * Return: 0 for success; else the error code is returned
> + *
> + * Trigger CMDQ to execute the CMDQ packet. Note that this is a
> + * synchronous flush function. When the function returned, the recorded
> + * commands have been done.
> + */
> +int cmdq_pkt_flush(struct cmdq_client *client, struct cmdq_pkt *pkt);
> +
> +/**
> + * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
> + *                          packet and call back at the end of done packet
> + * @client:	the CMDQ mailbox client
> + * @pkt:	the CMDQ packet
> + * @cb:		called at the end of done packet
> + * @data:	this data will pass back to cb
> + *
> + * Return: 0 for success; else the error code is returned
> + *
> + * Trigger CMDQ to asynchronously execute the CMDQ packet and call back
> + * at the end of done packet. Note that this is an ASYNC function. When the
> + * function returned, it may or may not be finished.
> + */
> +int cmdq_pkt_flush_async(struct cmdq_client *client, struct cmdq_pkt *pkt,
> +			 cmdq_async_flush_cb cb, void *data);
> +
> +#endif	/* __MTK_CMDQ_H__ */

[PATCH v21 4/4] soc: mediatek: Add Mediatek CMDQ helper

[houlong wei]

On Tue, 2018-02-06 at 10:52 +0800, CK Hu wrote:
> Hi, Houlong:
> 
> I've some inline comment.
> 
> On Wed, 2018-01-31 at 15:28 +0800, houlong.wei at mediatek.com wrote:
> > From: "hs.liao at mediatek.com" <hs.liao@mediatek.com>
> >
> > Add Mediatek CMDQ helper to create CMDQ packet and assemble GCE op code.
> >
> > Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
> > Signed-off-by: HS Liao <hs.liao@mediatek.com>
> > ---
> >  drivers/soc/mediatek/Kconfig           |   12 ++
> >  drivers/soc/mediatek/Makefile          |    1 +
> >  drivers/soc/mediatek/mtk-cmdq-helper.c |  322 ++++++++++++++++++++++++++++++++
> >  include/linux/soc/mediatek/mtk-cmdq.h  |  174 +++++++++++++++++
> >  4 files changed, 509 insertions(+)
> >  create mode 100644 drivers/soc/mediatek/mtk-cmdq-helper.c
> >  create mode 100644 include/linux/soc/mediatek/mtk-cmdq.h
> >
> > diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> > index a7d0667..e66582e 100644
> > --- a/drivers/soc/mediatek/Kconfig
> > +++ b/drivers/soc/mediatek/Kconfig
> > @@ -4,6 +4,18 @@
> >  menu "MediaTek SoC drivers"
> >  depends on ARCH_MEDIATEK || COMPILE_TEST
> >
> > +config MTK_CMDQ
> > +bool "MediaTek CMDQ Support"
> > +depends on ARM64 && ( ARCH_MEDIATEK || COMPILE_TEST )
> > +select MAILBOX
> > +select MTK_CMDQ_MBOX
> > +select MTK_INFRACFG
> > +help
> > +  Say yes here to add support for the MediaTek Command Queue (CMDQ)
> > +  driver. The CMDQ is used to help read/write registers with critical
> > +  time limitation, such as updating display configuration during the
> > +  vblank.
> > +
> >  config MTK_INFRACFG
> >  bool "MediaTek INFRACFG Support"
> >  select REGMAP
> > diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> > index 12998b0..64ce5ee 100644
> > --- a/drivers/soc/mediatek/Makefile
> > +++ b/drivers/soc/mediatek/Makefile
> > @@ -1,3 +1,4 @@
> > +obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o
> >  obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
> >  obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
> >  obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > new file mode 100644
> > index 0000000..80d0558
> > --- /dev/null
> > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > @@ -0,0 +1,322 @@
> > +/*
> > + * Copyright (c) 2015 MediaTek Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/completion.h>
> > +#include <linux/errno.h>
> > +#include <linux/of_address.h>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/mailbox_controller.h>
> > +#include <linux/soc/mediatek/mtk-cmdq.h>
> > +
> > +#define CMDQ_ARG_A_WRITE_MASK0xffff
> > +#define CMDQ_WRITE_ENABLE_MASKBIT(0)
> > +#define CMDQ_EOC_IRQ_ENBIT(0)
> > +#define CMDQ_EOC_CMD((u64)((CMDQ_CODE_EOC << CMDQ_OP_CODE_SHIFT)) \
> > +<< 32 | CMDQ_EOC_IRQ_EN)
> > +
> > +struct cmdq_subsys {
> > +u32base;
> > +intid;
> > +};
> > +
> > +static const struct cmdq_subsys gce_subsys[] = {
> > +{0x1400, 1},
> > +{0x1401, 2},
> > +{0x1402, 3},
> > +};
> 
> I think subsys definition varies by different SoC, so it's better to
> pass these definition from device tree to driver (client driver), and
> client driver pass this subsys in the related interface. For example,
> 
> in include/dt-bindings/gce/mt8173-gce.h, you define
> 
> #define GCE_SUBSYS_1400XXXX1
> #define GCE_SUBSYS_1401XXXX2
> #define GCE_SUBSYS_1402XXXX3
> 
> in device tree, place the subsys definition in client device node,
> 
> #include "dt-bindings/gce/mt8173-gce.h"
> 
> ovl0: ovl at 1400c000 {
> compatible = "mediatek,mt8173-disp-ovl";
> gce-subsys = <GCE_SUBSYS_1400XXXX>;
> ...
> };
> 
> And client driver pass subsys in the related interface,
> 
> int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32
> value);
> 
> So, for another SoC, you just need to modify device tree and you do not
> need to modify driver.
> > +
> > +static int cmdq_subsys_base_to_id(u32 base)
> > +{
> > +int i;
> > +
> > +for (i = 0; i < ARRAY_SIZE(gce_subsys); i++)
> > +if (gce_subsys[i].base == base)
> > +return gce_subsys[i].id;
> > +return -EFAULT;
> > +}
> > +
> > +static int cmdq_pkt_realloc_cmd_buffer(struct cmdq_pkt *pkt, size_t size)
> > +{
> > +void *new_buf;
> > +
> > +new_buf = krealloc(pkt->va_base, size, GFP_KERNEL | __GFP_ZERO);
> > +if (!new_buf)
> > +return -ENOMEM;
> > +pkt->va_base = new_buf;
> > +pkt->buf_size = size;
> > +return 0;
> > +}
> > +
> > +struct cmdq_base *cmdq_register_device(struct device *dev)
> > +{
> > +struct cmdq_base *cmdq_base;
> > +struct resource res;
> > +int subsys;
> > +u32 base;
> > +
> > +if (of_address_to_resource(dev->of_node, 0, &res))
> > +return NULL;
> > +base = (u32)res.start;
> > +
> > +subsys = cmdq_subsys_base_to_id(base >> 16);
> > +if (subsys < 0)
> > +return NULL;
> > +
> > +cmdq_base = devm_kmalloc(dev, sizeof(*cmdq_base), GFP_KERNEL);
> > +if (!cmdq_base)
> > +return NULL;
> > +cmdq_base->subsys = subsys;
> > +cmdq_base->base = base;
> > +
> > +return cmdq_base;
> > +}
> > +EXPORT_SYMBOL(cmdq_register_device);
> > +
> > +struct cmdq_client *cmdq_mbox_create(struct device *dev, int index)
> > +{
> > +struct cmdq_client *client;
> > +
> > +client = kzalloc(sizeof(*client), GFP_KERNEL);
> > +client->client.dev = dev;
> > +client->client.tx_block = false;
> > +client->chan = mbox_request_channel(&client->client, index);
> > +return client;
> > +}
> > +EXPORT_SYMBOL(cmdq_mbox_create);
> > +
> > +void cmdq_mbox_destroy(struct cmdq_client *client)
> > +{
> > +mbox_free_channel(client->chan);
> > +kfree(client);
> > +}
> > +EXPORT_SYMBOL(cmdq_mbox_destroy);
> > +
> > +int cmdq_pkt_create(struct cmdq_pkt **pkt_ptr)
> > +{
> > +struct cmdq_pkt *pkt;
> > +int err;
> > +
> > +pkt = kzalloc(sizeof(*pkt), GFP_KERNEL);
> > +if (!pkt)
> > +return -ENOMEM;
> > +err = cmdq_pkt_realloc_cmd_buffer(pkt, PAGE_SIZE);
> > +if (err < 0) {
> > +kfree(pkt);
> > +return err;
> > +}
> > +*pkt_ptr = pkt;
> > +return 0;
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_create);
> > +
> > +void cmdq_pkt_destroy(struct cmdq_pkt *pkt)
> > +{
> > +kfree(pkt->va_base);
> > +kfree(pkt);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_destroy);
> > +
> > +static bool cmdq_pkt_is_finalized(struct cmdq_pkt *pkt)
> > +{
> > +u64 *expect_eoc;
> > +
> > +if (pkt->cmd_buf_size < CMDQ_INST_SIZE << 1)
> > +return false;
> > +
> > +expect_eoc = pkt->va_base + pkt->cmd_buf_size - (CMDQ_INST_SIZE << 1);
> > +if (*expect_eoc == CMDQ_EOC_CMD)
> > +return true;
> > +
> > +return false;
> > +}
> > +
> > +static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
> > +   u32 arg_a, u32 arg_b)
> > +{
> > +u64 *cmd_ptr;
> > +int err;
> > +
> > +if (WARN_ON(cmdq_pkt_is_finalized(pkt)))
> > +return -EBUSY;
> > +if (unlikely(pkt->cmd_buf_size + CMDQ_INST_SIZE > pkt->buf_size)) {
> > +err = cmdq_pkt_realloc_cmd_buffer(pkt, pkt->buf_size << 1);
> > +if (err < 0)
> > +return err;
> > +}
> > +cmd_ptr = pkt->va_base + pkt->cmd_buf_size;
> > +(*cmd_ptr) = (u64)((code << CMDQ_OP_CODE_SHIFT) | arg_a) << 32 | arg_b;
> > +pkt->cmd_buf_size += CMDQ_INST_SIZE;
> > +return 0;
> > +}
> > +
> > +int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, struct cmdq_base *base,
> > +   u32 offset)
> > +{
> > +u32 arg_a = ((base->base + offset) & CMDQ_ARG_A_WRITE_MASK) |
> > +    (base->subsys << CMDQ_SUBSYS_SHIFT);
> > +return cmdq_pkt_append_command(pkt, CMDQ_CODE_WRITE, arg_a, value);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_write);
> > +
> > +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> > +struct cmdq_base *base, u32 offset, u32 mask)
> > +{
> > +u32 offset_mask = offset;
> > +int err;
> > +
> > +if (mask != 0xffffffff) {
> > +err = cmdq_pkt_append_command(pkt, CMDQ_CODE_MASK, 0, ~mask);
> > +if (err < 0)
> > +return err;
> > +offset_mask |= CMDQ_WRITE_ENABLE_MASK;
> > +}
> > +return cmdq_pkt_write(pkt, value, base, offset_mask);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_write_mask);
> > +
> > +static const u32 cmdq_event_value[CMDQ_MAX_EVENT] = {
> > +/* Display start of frame(SOF) events */
> > +[CMDQ_EVENT_DISP_OVL0_SOF] = 11,
> > +[CMDQ_EVENT_DISP_OVL1_SOF] = 12,
> > +[CMDQ_EVENT_DISP_RDMA0_SOF] = 13,
> > +[CMDQ_EVENT_DISP_RDMA1_SOF] = 14,
> > +[CMDQ_EVENT_DISP_RDMA2_SOF] = 15,
> > +[CMDQ_EVENT_DISP_WDMA0_SOF] = 16,
> > +[CMDQ_EVENT_DISP_WDMA1_SOF] = 17,
> > +/* Display end of frame(EOF) events */
> > +[CMDQ_EVENT_DISP_OVL0_EOF] = 39,
> > +[CMDQ_EVENT_DISP_OVL1_EOF] = 40,
> > +[CMDQ_EVENT_DISP_RDMA0_EOF] = 41,
> > +[CMDQ_EVENT_DISP_RDMA1_EOF] = 42,
> > +[CMDQ_EVENT_DISP_RDMA2_EOF] = 43,
> > +[CMDQ_EVENT_DISP_WDMA0_EOF] = 44,
> > +[CMDQ_EVENT_DISP_WDMA1_EOF] = 45,
> > +/* Mutex end of frame(EOF) events */
> > +[CMDQ_EVENT_MUTEX0_STREAM_EOF] = 53,
> > +[CMDQ_EVENT_MUTEX1_STREAM_EOF] = 54,
> > +[CMDQ_EVENT_MUTEX2_STREAM_EOF] = 55,
> > +[CMDQ_EVENT_MUTEX3_STREAM_EOF] = 56,
> > +[CMDQ_EVENT_MUTEX4_STREAM_EOF] = 57,
> > +/* Display underrun events */
> > +[CMDQ_EVENT_DISP_RDMA0_UNDERRUN] = 63,
> > +[CMDQ_EVENT_DISP_RDMA1_UNDERRUN] = 64,
> > +[CMDQ_EVENT_DISP_RDMA2_UNDERRUN] = 65,
> > +};
> 
> The event is like subsys that it varies by different SoC, so it's better
> to pass this information from device tree to client driver. And the wait
> for event interface would become
> 
> int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
> 
> And cmdq driver need not to translate the event value.
> 
> Regards,
> CK
> 

Thanks CK for sharing the idea about how to support another SoC.
I will consider it and will upload a new version later.

> > +
> > +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, enum cmdq_event event)
> > +{
> > +u32 arg_b;
> > +
> > +if (event >= CMDQ_MAX_EVENT || event < 0)
> > +return -EINVAL;
> > +
> > +/*
> > + * WFE arg_b
> > + * bit 0-11: wait value
> > + * bit 15: 1 - wait, 0 - no wait
> > + * bit 16-27: update value
> > + * bit 31: 1 - update, 0 - no update
> > + */
> > +arg_b = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
> > +return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE,
> > +cmdq_event_value[event], arg_b);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_wfe);
> > +
> > +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, enum cmdq_event event)
> > +{
> > +if (event >= CMDQ_MAX_EVENT || event < 0)
> > +return -EINVAL;
> > +
> > +return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE,
> > +cmdq_event_value[event], CMDQ_WFE_UPDATE);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_clear_event);
> > +
> > +static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
> > +{
> > +int err;
> > +
> > +if (cmdq_pkt_is_finalized(pkt))
> > +return 0;
> > +
> > +/* insert EOC and generate IRQ for each command iteration */
> > +err = cmdq_pkt_append_command(pkt, CMDQ_CODE_EOC, 0, CMDQ_EOC_IRQ_EN);
> > +if (err < 0)
> > +return err;
> > +
> > +/* JUMP to end */
> > +err = cmdq_pkt_append_command(pkt, CMDQ_CODE_JUMP, 0, CMDQ_JUMP_PASS);
> > +if (err < 0)
> > +return err;
> > +
> > +return 0;
> > +}
> > +
> > +int cmdq_pkt_flush_async(struct cmdq_client *client, struct cmdq_pkt *pkt,
> > + cmdq_async_flush_cb cb, void *data)
> > +{
> > +int err;
> > +struct device *dev;
> > +dma_addr_t dma_addr;
> > +
> > +err = cmdq_pkt_finalize(pkt);
> > +if (err < 0)
> > +return err;
> > +
> > +dev = client->chan->mbox->dev;
> > +dma_addr = dma_map_single(dev, pkt->va_base, pkt->cmd_buf_size,
> > +DMA_TO_DEVICE);
> > +if (dma_mapping_error(dev, dma_addr)) {
> > +dev_err(client->chan->mbox->dev, "dma map failed\n");
> > +return -ENOMEM;
> > +}
> > +
> > +pkt->pa_base = dma_addr;
> > +pkt->cb.cb = cb;
> > +pkt->cb.data = data;
> > +
> > +mbox_send_message(client->chan, pkt);
> > +/* We can send next packet immediately, so just call txdone. */
> > +mbox_client_txdone(client->chan, 0);
> > +
> > +return 0;
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_flush_async);
> > +
> > +struct cmdq_flush_completion {
> > +struct completion cmplt;
> > +bool err;
> > +};
> > +
> > +static void cmdq_pkt_flush_cb(struct cmdq_cb_data data)
> > +{
> > +struct cmdq_flush_completion *cmplt = data.data;
> > +
> > +cmplt->err = data.err;
> > +complete(&cmplt->cmplt);
> > +}
> > +
> > +int cmdq_pkt_flush(struct cmdq_client *client, struct cmdq_pkt *pkt)
> > +{
> > +struct cmdq_flush_completion cmplt;
> > +int err;
> > +
> > +init_completion(&cmplt.cmplt);
> > +err = cmdq_pkt_flush_async(client, pkt, cmdq_pkt_flush_cb, &cmplt);
> > +if (err < 0)
> > +return err;
> > +wait_for_completion(&cmplt.cmplt);
> > +return cmplt.err ? -EFAULT : 0;
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_flush);
> > diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> > new file mode 100644
> > index 0000000..5b35d73
> > --- /dev/null
> > +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> > @@ -0,0 +1,174 @@
> > +/*
> > + * Copyright (c) 2015 MediaTek Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#ifndef __MTK_CMDQ_H__
> > +#define __MTK_CMDQ_H__
> > +
> > +#include <linux/mailbox_client.h>
> > +#include <linux/mailbox/mtk-cmdq-mailbox.h>
> > +
> > +/* display events in command queue(CMDQ) */
> > +enum cmdq_event {
> > +/* Display start of frame(SOF) events */
> > +CMDQ_EVENT_DISP_OVL0_SOF,
> > +CMDQ_EVENT_DISP_OVL1_SOF,
> > +CMDQ_EVENT_DISP_RDMA0_SOF,
> > +CMDQ_EVENT_DISP_RDMA1_SOF,
> > +CMDQ_EVENT_DISP_RDMA2_SOF,
> > +CMDQ_EVENT_DISP_WDMA0_SOF,
> > +CMDQ_EVENT_DISP_WDMA1_SOF,
> > +/* Display end of frame(EOF) events */
> > +CMDQ_EVENT_DISP_OVL0_EOF,
> > +CMDQ_EVENT_DISP_OVL1_EOF,
> > +CMDQ_EVENT_DISP_RDMA0_EOF,
> > +CMDQ_EVENT_DISP_RDMA1_EOF,
> > +CMDQ_EVENT_DISP_RDMA2_EOF,
> > +CMDQ_EVENT_DISP_WDMA0_EOF,
> > +CMDQ_EVENT_DISP_WDMA1_EOF,
> > +/* Mutex end of frame(EOF) events */
> > +CMDQ_EVENT_MUTEX0_STREAM_EOF,
> > +CMDQ_EVENT_MUTEX1_STREAM_EOF,
> > +CMDQ_EVENT_MUTEX2_STREAM_EOF,
> > +CMDQ_EVENT_MUTEX3_STREAM_EOF,
> > +CMDQ_EVENT_MUTEX4_STREAM_EOF,
> > +/* Display underrun events */
> > +CMDQ_EVENT_DISP_RDMA0_UNDERRUN,
> > +CMDQ_EVENT_DISP_RDMA1_UNDERRUN,
> > +CMDQ_EVENT_DISP_RDMA2_UNDERRUN,
> > +/* Keep this at the end */
> > +CMDQ_MAX_EVENT,
> > +};
> > +
> > +struct cmdq_pkt;
> > +
> > +struct cmdq_base {
> > +intsubsys;
> > +u32base;
> > +};
> > +
> > +struct cmdq_client {
> > +struct mbox_client client;
> > +struct mbox_chan *chan;
> > +};
> > +
> > +/**
> > + * cmdq_register_device() - register device which needs CMDQ
> > + * @dev:device for CMDQ to access its registers
> > + *
> > + * Return: cmdq_base pointer or NULL for failed
> > + */
> > +struct cmdq_base *cmdq_register_device(struct device *dev);
> > +
> > +/**
> > + * cmdq_mbox_create() - create CMDQ mailbox client and channel
> > + * @dev:device of CMDQ mailbox client
> > + * @index:index of CMDQ mailbox channel
> > + *
> > + * Return: CMDQ mailbox client pointer
> > + */
> > +struct cmdq_client *cmdq_mbox_create(struct device *dev, int index);
> > +
> > +/**
> > + * cmdq_mbox_destroy() - destroy CMDQ mailbox client and channel
> > + * @client:the CMDQ mailbox client
> > + */
> > +void cmdq_mbox_destroy(struct cmdq_client *client);
> > +
> > +/**
> > + * cmdq_pkt_create() - create a CMDQ packet
> > + * @pkt_ptr:CMDQ packet pointer to retrieve cmdq_pkt
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_create(struct cmdq_pkt **pkt_ptr);
> > +
> > +/**
> > + * cmdq_pkt_destroy() - destroy the CMDQ packet
> > + * @pkt:the CMDQ packet
> > + */
> > +void cmdq_pkt_destroy(struct cmdq_pkt *pkt);
> > +
> > +/**
> > + * cmdq_pkt_write() - append write command to the CMDQ packet
> > + * @pkt:the CMDQ packet
> > + * @value:the specified target register value
> > + * @base:the CMDQ base
> > + * @offset:register offset from module base
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value,
> > +   struct cmdq_base *base, u32 offset);
> > +
> > +/**
> > + * cmdq_pkt_write_mask() - append write command with mask to the CMDQ packet
> > + * @pkt:the CMDQ packet
> > + * @value:the specified target register value
> > + * @base:the CMDQ base
> > + * @offset:register offset from module base
> > + * @mask:the specified target register mask
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> > +struct cmdq_base *base, u32 offset, u32 mask);
> > +
> > +/**
> > + * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
> > + * @pkt:the CMDQ packet
> > + * @event:the desired event type to "wait and CLEAR"
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, enum cmdq_event event);
> > +
> > +/**
> > + * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
> > + * @pkt:the CMDQ packet
> > + * @event:the desired event to be cleared
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, enum cmdq_event event);
> > +
> > +/**
> > + * cmdq_pkt_flush() - trigger CMDQ to execute the CMDQ packet
> > + * @client:the CMDQ mailbox client
> > + * @pkt:the CMDQ packet
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + *
> > + * Trigger CMDQ to execute the CMDQ packet. Note that this is a
> > + * synchronous flush function. When the function returned, the recorded
> > + * commands have been done.
> > + */
> > +int cmdq_pkt_flush(struct cmdq_client *client, struct cmdq_pkt *pkt);
> > +
> > +/**
> > + * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
> > + *                          packet and call back at the end of done packet
> > + * @client:the CMDQ mailbox client
> > + * @pkt:the CMDQ packet
> > + * @cb:called at the end of done packet
> > + * @data:this data will pass back to cb
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + *
> > + * Trigger CMDQ to asynchronously execute the CMDQ packet and call back
> > + * at the end of done packet. Note that this is an ASYNC function. When the
> > + * function returned, it may or may not be finished.
> > + */
> > +int cmdq_pkt_flush_async(struct cmdq_client *client, struct cmdq_pkt *pkt,
> > + cmdq_async_flush_cb cb, void *data);
> > +
> > +#endif/* __MTK_CMDQ_H__ */
> 
> 

[PATCH v21 4/4] soc: mediatek: Add Mediatek CMDQ helper

[houlong wei]

On Tue, 2018-02-06 at 10:52 +0800, CK Hu wrote:
> Hi, Houlong:
> 
> I've some inline comment.
> 
> On Wed, 2018-01-31 at 15:28 +0800, houlong.wei at mediatek.com wrote:
> > From: "hs.liao at mediatek.com" <hs.liao@mediatek.com>
> >
> > Add Mediatek CMDQ helper to create CMDQ packet and assemble GCE op code.
> >
> > Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
> > Signed-off-by: HS Liao <hs.liao@mediatek.com>
> > ---
> >  drivers/soc/mediatek/Kconfig           |   12 ++
> >  drivers/soc/mediatek/Makefile          |    1 +
> >  drivers/soc/mediatek/mtk-cmdq-helper.c |  322 ++++++++++++++++++++++++++++++++
> >  include/linux/soc/mediatek/mtk-cmdq.h  |  174 +++++++++++++++++
> >  4 files changed, 509 insertions(+)
> >  create mode 100644 drivers/soc/mediatek/mtk-cmdq-helper.c
> >  create mode 100644 include/linux/soc/mediatek/mtk-cmdq.h
> >
> > diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> > index a7d0667..e66582e 100644
> > --- a/drivers/soc/mediatek/Kconfig
> > +++ b/drivers/soc/mediatek/Kconfig
> > @@ -4,6 +4,18 @@
> >  menu "MediaTek SoC drivers"
> >  depends on ARCH_MEDIATEK || COMPILE_TEST
> >
> > +config MTK_CMDQ
> > +bool "MediaTek CMDQ Support"
> > +depends on ARM64 && ( ARCH_MEDIATEK || COMPILE_TEST )
> > +select MAILBOX
> > +select MTK_CMDQ_MBOX
> > +select MTK_INFRACFG
> > +help
> > +  Say yes here to add support for the MediaTek Command Queue (CMDQ)
> > +  driver. The CMDQ is used to help read/write registers with critical
> > +  time limitation, such as updating display configuration during the
> > +  vblank.
> > +
> >  config MTK_INFRACFG
> >  bool "MediaTek INFRACFG Support"
> >  select REGMAP
> > diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> > index 12998b0..64ce5ee 100644
> > --- a/drivers/soc/mediatek/Makefile
> > +++ b/drivers/soc/mediatek/Makefile
> > @@ -1,3 +1,4 @@
> > +obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o
> >  obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
> >  obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
> >  obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > new file mode 100644
> > index 0000000..80d0558
> > --- /dev/null
> > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > @@ -0,0 +1,322 @@
> > +/*
> > + * Copyright (c) 2015 MediaTek Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/completion.h>
> > +#include <linux/errno.h>
> > +#include <linux/of_address.h>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/mailbox_controller.h>
> > +#include <linux/soc/mediatek/mtk-cmdq.h>
> > +
> > +#define CMDQ_ARG_A_WRITE_MASK0xffff
> > +#define CMDQ_WRITE_ENABLE_MASKBIT(0)
> > +#define CMDQ_EOC_IRQ_ENBIT(0)
> > +#define CMDQ_EOC_CMD((u64)((CMDQ_CODE_EOC << CMDQ_OP_CODE_SHIFT)) \
> > +<< 32 | CMDQ_EOC_IRQ_EN)
> > +
> > +struct cmdq_subsys {
> > +u32base;
> > +intid;
> > +};
> > +
> > +static const struct cmdq_subsys gce_subsys[] = {
> > +{0x1400, 1},
> > +{0x1401, 2},
> > +{0x1402, 3},
> > +};
> 
> I think subsys definition varies by different SoC, so it's better to
> pass these definition from device tree to driver (client driver), and
> client driver pass this subsys in the related interface. For example,
> 
> in include/dt-bindings/gce/mt8173-gce.h, you define
> 
> #define GCE_SUBSYS_1400XXXX1
> #define GCE_SUBSYS_1401XXXX2
> #define GCE_SUBSYS_1402XXXX3
> 
> in device tree, place the subsys definition in client device node,
> 
> #include "dt-bindings/gce/mt8173-gce.h"
> 
> ovl0: ovl at 1400c000 {
> compatible = "mediatek,mt8173-disp-ovl";
> gce-subsys = <GCE_SUBSYS_1400XXXX>;
> ...
> };
> 
> And client driver pass subsys in the related interface,
> 
> int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32
> value);
> 
> So, for another SoC, you just need to modify device tree and you do not
> need to modify driver.

Hi CK, thanks for your suggestion. I do it in v22.

> > +
> > +static int cmdq_subsys_base_to_id(u32 base)
> > +{
> > +int i;
> > +
> > +for (i = 0; i < ARRAY_SIZE(gce_subsys); i++)
> > +if (gce_subsys[i].base == base)
> > +return gce_subsys[i].id;
> > +return -EFAULT;
> > +}
> > +
> > +static int cmdq_pkt_realloc_cmd_buffer(struct cmdq_pkt *pkt, size_t size)
> > +{
> > +void *new_buf;
> > +
> > +new_buf = krealloc(pkt->va_base, size, GFP_KERNEL | __GFP_ZERO);
> > +if (!new_buf)
> > +return -ENOMEM;
> > +pkt->va_base = new_buf;
> > +pkt->buf_size = size;
> > +return 0;
> > +}
> > +
> > +struct cmdq_base *cmdq_register_device(struct device *dev)
> > +{
> > +struct cmdq_base *cmdq_base;
> > +struct resource res;
> > +int subsys;
> > +u32 base;
> > +
> > +if (of_address_to_resource(dev->of_node, 0, &res))
> > +return NULL;
> > +base = (u32)res.start;
> > +
> > +subsys = cmdq_subsys_base_to_id(base >> 16);
> > +if (subsys < 0)
> > +return NULL;
> > +
> > +cmdq_base = devm_kmalloc(dev, sizeof(*cmdq_base), GFP_KERNEL);
> > +if (!cmdq_base)
> > +return NULL;
> > +cmdq_base->subsys = subsys;
> > +cmdq_base->base = base;
> > +
> > +return cmdq_base;
> > +}
> > +EXPORT_SYMBOL(cmdq_register_device);
> > +
> > +struct cmdq_client *cmdq_mbox_create(struct device *dev, int index)
> > +{
> > +struct cmdq_client *client;
> > +
> > +client = kzalloc(sizeof(*client), GFP_KERNEL);
> > +client->client.dev = dev;
> > +client->client.tx_block = false;
> > +client->chan = mbox_request_channel(&client->client, index);
> > +return client;
> > +}
> > +EXPORT_SYMBOL(cmdq_mbox_create);
> > +
> > +void cmdq_mbox_destroy(struct cmdq_client *client)
> > +{
> > +mbox_free_channel(client->chan);
> > +kfree(client);
> > +}
> > +EXPORT_SYMBOL(cmdq_mbox_destroy);
> > +
> > +int cmdq_pkt_create(struct cmdq_pkt **pkt_ptr)
> > +{
> > +struct cmdq_pkt *pkt;
> > +int err;
> > +
> > +pkt = kzalloc(sizeof(*pkt), GFP_KERNEL);
> > +if (!pkt)
> > +return -ENOMEM;
> > +err = cmdq_pkt_realloc_cmd_buffer(pkt, PAGE_SIZE);
> > +if (err < 0) {
> > +kfree(pkt);
> > +return err;
> > +}
> > +*pkt_ptr = pkt;
> > +return 0;
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_create);
> > +
> > +void cmdq_pkt_destroy(struct cmdq_pkt *pkt)
> > +{
> > +kfree(pkt->va_base);
> > +kfree(pkt);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_destroy);
> > +
> > +static bool cmdq_pkt_is_finalized(struct cmdq_pkt *pkt)
> > +{
> > +u64 *expect_eoc;
> > +
> > +if (pkt->cmd_buf_size < CMDQ_INST_SIZE << 1)
> > +return false;
> > +
> > +expect_eoc = pkt->va_base + pkt->cmd_buf_size - (CMDQ_INST_SIZE << 1);
> > +if (*expect_eoc == CMDQ_EOC_CMD)
> > +return true;
> > +
> > +return false;
> > +}
> > +
> > +static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
> > +   u32 arg_a, u32 arg_b)
> > +{
> > +u64 *cmd_ptr;
> > +int err;
> > +
> > +if (WARN_ON(cmdq_pkt_is_finalized(pkt)))
> > +return -EBUSY;
> > +if (unlikely(pkt->cmd_buf_size + CMDQ_INST_SIZE > pkt->buf_size)) {
> > +err = cmdq_pkt_realloc_cmd_buffer(pkt, pkt->buf_size << 1);
> > +if (err < 0)
> > +return err;
> > +}
> > +cmd_ptr = pkt->va_base + pkt->cmd_buf_size;
> > +(*cmd_ptr) = (u64)((code << CMDQ_OP_CODE_SHIFT) | arg_a) << 32 | arg_b;
> > +pkt->cmd_buf_size += CMDQ_INST_SIZE;
> > +return 0;
> > +}
> > +
> > +int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, struct cmdq_base *base,
> > +   u32 offset)
> > +{
> > +u32 arg_a = ((base->base + offset) & CMDQ_ARG_A_WRITE_MASK) |
> > +    (base->subsys << CMDQ_SUBSYS_SHIFT);
> > +return cmdq_pkt_append_command(pkt, CMDQ_CODE_WRITE, arg_a, value);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_write);
> > +
> > +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> > +struct cmdq_base *base, u32 offset, u32 mask)
> > +{
> > +u32 offset_mask = offset;
> > +int err;
> > +
> > +if (mask != 0xffffffff) {
> > +err = cmdq_pkt_append_command(pkt, CMDQ_CODE_MASK, 0, ~mask);
> > +if (err < 0)
> > +return err;
> > +offset_mask |= CMDQ_WRITE_ENABLE_MASK;
> > +}
> > +return cmdq_pkt_write(pkt, value, base, offset_mask);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_write_mask);
> > +
> > +static const u32 cmdq_event_value[CMDQ_MAX_EVENT] = {
> > +/* Display start of frame(SOF) events */
> > +[CMDQ_EVENT_DISP_OVL0_SOF] = 11,
> > +[CMDQ_EVENT_DISP_OVL1_SOF] = 12,
> > +[CMDQ_EVENT_DISP_RDMA0_SOF] = 13,
> > +[CMDQ_EVENT_DISP_RDMA1_SOF] = 14,
> > +[CMDQ_EVENT_DISP_RDMA2_SOF] = 15,
> > +[CMDQ_EVENT_DISP_WDMA0_SOF] = 16,
> > +[CMDQ_EVENT_DISP_WDMA1_SOF] = 17,
> > +/* Display end of frame(EOF) events */
> > +[CMDQ_EVENT_DISP_OVL0_EOF] = 39,
> > +[CMDQ_EVENT_DISP_OVL1_EOF] = 40,
> > +[CMDQ_EVENT_DISP_RDMA0_EOF] = 41,
> > +[CMDQ_EVENT_DISP_RDMA1_EOF] = 42,
> > +[CMDQ_EVENT_DISP_RDMA2_EOF] = 43,
> > +[CMDQ_EVENT_DISP_WDMA0_EOF] = 44,
> > +[CMDQ_EVENT_DISP_WDMA1_EOF] = 45,
> > +/* Mutex end of frame(EOF) events */
> > +[CMDQ_EVENT_MUTEX0_STREAM_EOF] = 53,
> > +[CMDQ_EVENT_MUTEX1_STREAM_EOF] = 54,
> > +[CMDQ_EVENT_MUTEX2_STREAM_EOF] = 55,
> > +[CMDQ_EVENT_MUTEX3_STREAM_EOF] = 56,
> > +[CMDQ_EVENT_MUTEX4_STREAM_EOF] = 57,
> > +/* Display underrun events */
> > +[CMDQ_EVENT_DISP_RDMA0_UNDERRUN] = 63,
> > +[CMDQ_EVENT_DISP_RDMA1_UNDERRUN] = 64,
> > +[CMDQ_EVENT_DISP_RDMA2_UNDERRUN] = 65,
> > +};
> 
> The event is like subsys that it varies by different SoC, so it's better
> to pass this information from device tree to client driver. And the wait
> for event interface would become
> 
> int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
> 
> And cmdq driver need not to translate the event value.
> 
> Regards,
> CK

Hi CK, thanks for your suggestion. I do it in v22.

> > +
> > +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, enum cmdq_event event)
> > +{
> > +u32 arg_b;
> > +
> > +if (event >= CMDQ_MAX_EVENT || event < 0)
> > +return -EINVAL;
> > +
> > +/*
> > + * WFE arg_b
> > + * bit 0-11: wait value
> > + * bit 15: 1 - wait, 0 - no wait
> > + * bit 16-27: update value
> > + * bit 31: 1 - update, 0 - no update
> > + */
> > +arg_b = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
> > +return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE,
> > +cmdq_event_value[event], arg_b);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_wfe);
> > +
> > +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, enum cmdq_event event)
> > +{
> > +if (event >= CMDQ_MAX_EVENT || event < 0)
> > +return -EINVAL;
> > +
> > +return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE,
> > +cmdq_event_value[event], CMDQ_WFE_UPDATE);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_clear_event);
> > +
> > +static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
> > +{
> > +int err;
> > +
> > +if (cmdq_pkt_is_finalized(pkt))
> > +return 0;
> > +
> > +/* insert EOC and generate IRQ for each command iteration */
> > +err = cmdq_pkt_append_command(pkt, CMDQ_CODE_EOC, 0, CMDQ_EOC_IRQ_EN);
> > +if (err < 0)
> > +return err;
> > +
> > +/* JUMP to end */
> > +err = cmdq_pkt_append_command(pkt, CMDQ_CODE_JUMP, 0, CMDQ_JUMP_PASS);
> > +if (err < 0)
> > +return err;
> > +
> > +return 0;
> > +}
> > +
> > +int cmdq_pkt_flush_async(struct cmdq_client *client, struct cmdq_pkt *pkt,
> > + cmdq_async_flush_cb cb, void *data)
> > +{
> > +int err;
> > +struct device *dev;
> > +dma_addr_t dma_addr;
> > +
> > +err = cmdq_pkt_finalize(pkt);
> > +if (err < 0)
> > +return err;
> > +
> > +dev = client->chan->mbox->dev;
> > +dma_addr = dma_map_single(dev, pkt->va_base, pkt->cmd_buf_size,
> > +DMA_TO_DEVICE);
> > +if (dma_mapping_error(dev, dma_addr)) {
> > +dev_err(client->chan->mbox->dev, "dma map failed\n");
> > +return -ENOMEM;
> > +}
> > +
> > +pkt->pa_base = dma_addr;
> > +pkt->cb.cb = cb;
> > +pkt->cb.data = data;
> > +
> > +mbox_send_message(client->chan, pkt);
> > +/* We can send next packet immediately, so just call txdone. */
> > +mbox_client_txdone(client->chan, 0);
> > +
> > +return 0;
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_flush_async);
> > +
> > +struct cmdq_flush_completion {
> > +struct completion cmplt;
> > +bool err;
> > +};
> > +
> > +static void cmdq_pkt_flush_cb(struct cmdq_cb_data data)
> > +{
> > +struct cmdq_flush_completion *cmplt = data.data;
> > +
> > +cmplt->err = data.err;
> > +complete(&cmplt->cmplt);
> > +}
> > +
> > +int cmdq_pkt_flush(struct cmdq_client *client, struct cmdq_pkt *pkt)
> > +{
> > +struct cmdq_flush_completion cmplt;
> > +int err;
> > +
> > +init_completion(&cmplt.cmplt);
> > +err = cmdq_pkt_flush_async(client, pkt, cmdq_pkt_flush_cb, &cmplt);
> > +if (err < 0)
> > +return err;
> > +wait_for_completion(&cmplt.cmplt);
> > +return cmplt.err ? -EFAULT : 0;
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_flush);
> > diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> > new file mode 100644
> > index 0000000..5b35d73
> > --- /dev/null
> > +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> > @@ -0,0 +1,174 @@
> > +/*
> > + * Copyright (c) 2015 MediaTek Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#ifndef __MTK_CMDQ_H__
> > +#define __MTK_CMDQ_H__
> > +
> > +#include <linux/mailbox_client.h>
> > +#include <linux/mailbox/mtk-cmdq-mailbox.h>
> > +
> > +/* display events in command queue(CMDQ) */
> > +enum cmdq_event {
> > +/* Display start of frame(SOF) events */
> > +CMDQ_EVENT_DISP_OVL0_SOF,
> > +CMDQ_EVENT_DISP_OVL1_SOF,
> > +CMDQ_EVENT_DISP_RDMA0_SOF,
> > +CMDQ_EVENT_DISP_RDMA1_SOF,
> > +CMDQ_EVENT_DISP_RDMA2_SOF,
> > +CMDQ_EVENT_DISP_WDMA0_SOF,
> > +CMDQ_EVENT_DISP_WDMA1_SOF,
> > +/* Display end of frame(EOF) events */
> > +CMDQ_EVENT_DISP_OVL0_EOF,
> > +CMDQ_EVENT_DISP_OVL1_EOF,
> > +CMDQ_EVENT_DISP_RDMA0_EOF,
> > +CMDQ_EVENT_DISP_RDMA1_EOF,
> > +CMDQ_EVENT_DISP_RDMA2_EOF,
> > +CMDQ_EVENT_DISP_WDMA0_EOF,
> > +CMDQ_EVENT_DISP_WDMA1_EOF,
> > +/* Mutex end of frame(EOF) events */
> > +CMDQ_EVENT_MUTEX0_STREAM_EOF,
> > +CMDQ_EVENT_MUTEX1_STREAM_EOF,
> > +CMDQ_EVENT_MUTEX2_STREAM_EOF,
> > +CMDQ_EVENT_MUTEX3_STREAM_EOF,
> > +CMDQ_EVENT_MUTEX4_STREAM_EOF,
> > +/* Display underrun events */
> > +CMDQ_EVENT_DISP_RDMA0_UNDERRUN,
> > +CMDQ_EVENT_DISP_RDMA1_UNDERRUN,
> > +CMDQ_EVENT_DISP_RDMA2_UNDERRUN,
> > +/* Keep this at the end */
> > +CMDQ_MAX_EVENT,
> > +};
> > +
> > +struct cmdq_pkt;
> > +
> > +struct cmdq_base {
> > +intsubsys;
> > +u32base;
> > +};
> > +
> > +struct cmdq_client {
> > +struct mbox_client client;
> > +struct mbox_chan *chan;
> > +};
> > +
> > +/**
> > + * cmdq_register_device() - register device which needs CMDQ
> > + * @dev:device for CMDQ to access its registers
> > + *
> > + * Return: cmdq_base pointer or NULL for failed
> > + */
> > +struct cmdq_base *cmdq_register_device(struct device *dev);
> > +
> > +/**
> > + * cmdq_mbox_create() - create CMDQ mailbox client and channel
> > + * @dev:device of CMDQ mailbox client
> > + * @index:index of CMDQ mailbox channel
> > + *
> > + * Return: CMDQ mailbox client pointer
> > + */
> > +struct cmdq_client *cmdq_mbox_create(struct device *dev, int index);
> > +
> > +/**
> > + * cmdq_mbox_destroy() - destroy CMDQ mailbox client and channel
> > + * @client:the CMDQ mailbox client
> > + */
> > +void cmdq_mbox_destroy(struct cmdq_client *client);
> > +
> > +/**
> > + * cmdq_pkt_create() - create a CMDQ packet
> > + * @pkt_ptr:CMDQ packet pointer to retrieve cmdq_pkt
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_create(struct cmdq_pkt **pkt_ptr);
> > +
> > +/**
> > + * cmdq_pkt_destroy() - destroy the CMDQ packet
> > + * @pkt:the CMDQ packet
> > + */
> > +void cmdq_pkt_destroy(struct cmdq_pkt *pkt);
> > +
> > +/**
> > + * cmdq_pkt_write() - append write command to the CMDQ packet
> > + * @pkt:the CMDQ packet
> > + * @value:the specified target register value
> > + * @base:the CMDQ base
> > + * @offset:register offset from module base
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value,
> > +   struct cmdq_base *base, u32 offset);
> > +
> > +/**
> > + * cmdq_pkt_write_mask() - append write command with mask to the CMDQ packet
> > + * @pkt:the CMDQ packet
> > + * @value:the specified target register value
> > + * @base:the CMDQ base
> > + * @offset:register offset from module base
> > + * @mask:the specified target register mask
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> > +struct cmdq_base *base, u32 offset, u32 mask);
> > +
> > +/**
> > + * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
> > + * @pkt:the CMDQ packet
> > + * @event:the desired event type to "wait and CLEAR"
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, enum cmdq_event event);
> > +
> > +/**
> > + * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
> > + * @pkt:the CMDQ packet
> > + * @event:the desired event to be cleared
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, enum cmdq_event event);
> > +
> > +/**
> > + * cmdq_pkt_flush() - trigger CMDQ to execute the CMDQ packet
> > + * @client:the CMDQ mailbox client
> > + * @pkt:the CMDQ packet
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + *
> > + * Trigger CMDQ to execute the CMDQ packet. Note that this is a
> > + * synchronous flush function. When the function returned, the recorded
> > + * commands have been done.
> > + */
> > +int cmdq_pkt_flush(struct cmdq_client *client, struct cmdq_pkt *pkt);
> > +
> > +/**
> > + * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
> > + *                          packet and call back at the end of done packet
> > + * @client:the CMDQ mailbox client
> > + * @pkt:the CMDQ packet
> > + * @cb:called at the end of done packet
> > + * @data:this data will pass back to cb
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + *
> > + * Trigger CMDQ to asynchronously execute the CMDQ packet and call back
> > + * at the end of done packet. Note that this is an ASYNC function. When the
> > + * function returned, it may or may not be finished.
> > + */
> > +int cmdq_pkt_flush_async(struct cmdq_client *client, struct cmdq_pkt *pkt,
> > + cmdq_async_flush_cb cb, void *data);
> > +
> > +#endif/* __MTK_CMDQ_H__ */
> 
> 

[PATCH v21 4/4] soc: mediatek: Add Mediatek CMDQ helper

[CK Hu]

Hi, Houlong:

I've one more inline comment.

On Wed, 2018-01-31 at 15:28 +0800, houlong.wei at mediatek.com wrote:
> From: "hs.liao at mediatek.com" <hs.liao@mediatek.com>
> 
> Add Mediatek CMDQ helper to create CMDQ packet and assemble GCE op code.
> 
> Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
> Signed-off-by: HS Liao <hs.liao@mediatek.com>
> ---
>  drivers/soc/mediatek/Kconfig           |   12 ++
>  drivers/soc/mediatek/Makefile          |    1 +
>  drivers/soc/mediatek/mtk-cmdq-helper.c |  322 ++++++++++++++++++++++++++++++++
>  include/linux/soc/mediatek/mtk-cmdq.h  |  174 +++++++++++++++++
>  4 files changed, 509 insertions(+)
>  create mode 100644 drivers/soc/mediatek/mtk-cmdq-helper.c
>  create mode 100644 include/linux/soc/mediatek/mtk-cmdq.h
> 
> diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> index a7d0667..e66582e 100644
> --- a/drivers/soc/mediatek/Kconfig
> +++ b/drivers/soc/mediatek/Kconfig
> @@ -4,6 +4,18 @@
>  menu "MediaTek SoC drivers"
>  	depends on ARCH_MEDIATEK || COMPILE_TEST
>  
> +config MTK_CMDQ
> +	bool "MediaTek CMDQ Support"
> +	depends on ARM64 && ( ARCH_MEDIATEK || COMPILE_TEST )
> +	select MAILBOX
> +	select MTK_CMDQ_MBOX
> +	select MTK_INFRACFG
> +	help
> +	  Say yes here to add support for the MediaTek Command Queue (CMDQ)
> +	  driver. The CMDQ is used to help read/write registers with critical
> +	  time limitation, such as updating display configuration during the
> +	  vblank.
> +
>  config MTK_INFRACFG
>  	bool "MediaTek INFRACFG Support"
>  	select REGMAP
> diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> index 12998b0..64ce5ee 100644
> --- a/drivers/soc/mediatek/Makefile
> +++ b/drivers/soc/mediatek/Makefile
> @@ -1,3 +1,4 @@
> +obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o
>  obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
>  obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
>  obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> new file mode 100644
> index 0000000..80d0558
> --- /dev/null
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -0,0 +1,322 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/completion.h>
> +#include <linux/errno.h>
> +#include <linux/of_address.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/mailbox_controller.h>
> +#include <linux/soc/mediatek/mtk-cmdq.h>
> +
> +#define CMDQ_ARG_A_WRITE_MASK	0xffff
> +#define CMDQ_WRITE_ENABLE_MASK	BIT(0)
> +#define CMDQ_EOC_IRQ_EN		BIT(0)
> +#define CMDQ_EOC_CMD		((u64)((CMDQ_CODE_EOC << CMDQ_OP_CODE_SHIFT)) \
> +				<< 32 | CMDQ_EOC_IRQ_EN)
> +
> +struct cmdq_subsys {
> +	u32	base;
> +	int	id;
> +};
> +
> +static const struct cmdq_subsys gce_subsys[] = {
> +	{0x1400, 1},
> +	{0x1401, 2},
> +	{0x1402, 3},
> +};
> +
> +static int cmdq_subsys_base_to_id(u32 base)
> +{
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(gce_subsys); i++)
> +		if (gce_subsys[i].base == base)
> +			return gce_subsys[i].id;
> +	return -EFAULT;
> +}
> +
> +static int cmdq_pkt_realloc_cmd_buffer(struct cmdq_pkt *pkt, size_t size)
> +{
> +	void *new_buf;
> +
> +	new_buf = krealloc(pkt->va_base, size, GFP_KERNEL | __GFP_ZERO);
> +	if (!new_buf)
> +		return -ENOMEM;
> +	pkt->va_base = new_buf;
> +	pkt->buf_size = size;
> +	return 0;
> +}
> +
> +struct cmdq_base *cmdq_register_device(struct device *dev)
> +{
> +	struct cmdq_base *cmdq_base;
> +	struct resource res;
> +	int subsys;
> +	u32 base;
> +
> +	if (of_address_to_resource(dev->of_node, 0, &res))
> +		return NULL;
> +	base = (u32)res.start;
> +
> +	subsys = cmdq_subsys_base_to_id(base >> 16);
> +	if (subsys < 0)
> +		return NULL;
> +
> +	cmdq_base = devm_kmalloc(dev, sizeof(*cmdq_base), GFP_KERNEL);
> +	if (!cmdq_base)
> +		return NULL;
> +	cmdq_base->subsys = subsys;
> +	cmdq_base->base = base;
> +
> +	return cmdq_base;
> +}
> +EXPORT_SYMBOL(cmdq_register_device);
> +
> +struct cmdq_client *cmdq_mbox_create(struct device *dev, int index)
> +{
> +	struct cmdq_client *client;
> +
> +	client = kzalloc(sizeof(*client), GFP_KERNEL);
> +	client->client.dev = dev;
> +	client->client.tx_block = false;
> +	client->chan = mbox_request_channel(&client->client, index);
> +	return client;
> +}
> +EXPORT_SYMBOL(cmdq_mbox_create);
> +
> +void cmdq_mbox_destroy(struct cmdq_client *client)
> +{
> +	mbox_free_channel(client->chan);
> +	kfree(client);
> +}
> +EXPORT_SYMBOL(cmdq_mbox_destroy);
> +
> +int cmdq_pkt_create(struct cmdq_pkt **pkt_ptr)
> +{
> +	struct cmdq_pkt *pkt;
> +	int err;
> +
> +	pkt = kzalloc(sizeof(*pkt), GFP_KERNEL);
> +	if (!pkt)
> +		return -ENOMEM;
> +	err = cmdq_pkt_realloc_cmd_buffer(pkt, PAGE_SIZE);
> +	if (err < 0) {
> +		kfree(pkt);
> +		return err;
> +	}
> +	*pkt_ptr = pkt;
> +	return 0;
> +}
> +EXPORT_SYMBOL(cmdq_pkt_create);
> +
> +void cmdq_pkt_destroy(struct cmdq_pkt *pkt)
> +{
> +	kfree(pkt->va_base);
> +	kfree(pkt);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_destroy);
> +
> +static bool cmdq_pkt_is_finalized(struct cmdq_pkt *pkt)
> +{
> +	u64 *expect_eoc;
> +
> +	if (pkt->cmd_buf_size < CMDQ_INST_SIZE << 1)
> +		return false;
> +
> +	expect_eoc = pkt->va_base + pkt->cmd_buf_size - (CMDQ_INST_SIZE << 1);
> +	if (*expect_eoc == CMDQ_EOC_CMD)
> +		return true;
> +
> +	return false;
> +}
> +
> +static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
> +				   u32 arg_a, u32 arg_b)
> +{
> +	u64 *cmd_ptr;
> +	int err;
> +
> +	if (WARN_ON(cmdq_pkt_is_finalized(pkt)))
> +		return -EBUSY;
> +	if (unlikely(pkt->cmd_buf_size + CMDQ_INST_SIZE > pkt->buf_size)) {
> +		err = cmdq_pkt_realloc_cmd_buffer(pkt, pkt->buf_size << 1);

In your design, the command buffer is frequently allocated and freed.
But client may not want this mechanism because it have penalty on CPU
loading and may have risk of allocation failure. The client may
pre-allocate the command buffer and reuse it. So it's better to let
client decide which buffer management it want. That means cmdq helper do
not allocate command buffer and do not reallocate it. The working flow
would be:

For client that want to pre-allocate buffer:
(1) Client pre-allocate a command buffer with a pre-calculated size.
(Programmer should make sure that all command would not exceed this
size)
(2) Client use cmdq helper function to generate command in command
buffer. If command buffer is full, helper still increase
pkt->cmd_buf_size but do not write command into command buffer.
(3) When client flush packet, cmdq helper could check whether
pkt->cmd_buf_size is greater than pkt->buf_size, if so, return error and
programmer should modify the pre-calculated size in step (1).
(4) Wait for command done.
(5) Set pkt->cmd_buf_size to zero and directly goto step (2) to reuse
this command buffer.

For client that want to dynamically allocate buffer:
(1) Client dynamically allocate a command buffer with a initial size,
for example, 1024 bytes.
(2) Client use cmdq helper function to generate command in command
buffer. If command buffer is full, helper still increase
pkt->cmd_buf_size but do not write command into command buffer.
(3) When client flush packet, cmdq helper could check whether
pkt->cmd_buf_size is greater than pkt->buf_size, if so, return error and
client goto step (1) and reallocate a command buffer with pkt->buf_size.
(4) Wait for command done.
(5) Free the command buffer.

Because the reallocation is so complicated, for client that want to
dynamically allocate buffer, the initial buffer size could also be
pre-calculated that you need not to reallocate it. Once the buffer is
full, programmer should also fix the accurate buffer size.

Regards,
CK

> +		if (err < 0)
> +			return err;
> +	}
> +	cmd_ptr = pkt->va_base + pkt->cmd_buf_size;
> +	(*cmd_ptr) = (u64)((code << CMDQ_OP_CODE_SHIFT) | arg_a) << 32 | arg_b;
> +	pkt->cmd_buf_size += CMDQ_INST_SIZE;
> +	return 0;
> +}
> +
> +int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, struct cmdq_base *base,
> +		   u32 offset)
> +{
> +	u32 arg_a = ((base->base + offset) & CMDQ_ARG_A_WRITE_MASK) |
> +		    (base->subsys << CMDQ_SUBSYS_SHIFT);
> +	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WRITE, arg_a, value);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_write);
> +
> +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> +			struct cmdq_base *base, u32 offset, u32 mask)
> +{
> +	u32 offset_mask = offset;
> +	int err;
> +
> +	if (mask != 0xffffffff) {
> +		err = cmdq_pkt_append_command(pkt, CMDQ_CODE_MASK, 0, ~mask);
> +		if (err < 0)
> +			return err;
> +		offset_mask |= CMDQ_WRITE_ENABLE_MASK;
> +	}
> +	return cmdq_pkt_write(pkt, value, base, offset_mask);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_write_mask);
> +
> +static const u32 cmdq_event_value[CMDQ_MAX_EVENT] = {
> +	/* Display start of frame(SOF) events */
> +	[CMDQ_EVENT_DISP_OVL0_SOF] = 11,
> +	[CMDQ_EVENT_DISP_OVL1_SOF] = 12,
> +	[CMDQ_EVENT_DISP_RDMA0_SOF] = 13,
> +	[CMDQ_EVENT_DISP_RDMA1_SOF] = 14,
> +	[CMDQ_EVENT_DISP_RDMA2_SOF] = 15,
> +	[CMDQ_EVENT_DISP_WDMA0_SOF] = 16,
> +	[CMDQ_EVENT_DISP_WDMA1_SOF] = 17,
> +	/* Display end of frame(EOF) events */
> +	[CMDQ_EVENT_DISP_OVL0_EOF] = 39,
> +	[CMDQ_EVENT_DISP_OVL1_EOF] = 40,
> +	[CMDQ_EVENT_DISP_RDMA0_EOF] = 41,
> +	[CMDQ_EVENT_DISP_RDMA1_EOF] = 42,
> +	[CMDQ_EVENT_DISP_RDMA2_EOF] = 43,
> +	[CMDQ_EVENT_DISP_WDMA0_EOF] = 44,
> +	[CMDQ_EVENT_DISP_WDMA1_EOF] = 45,
> +	/* Mutex end of frame(EOF) events */
> +	[CMDQ_EVENT_MUTEX0_STREAM_EOF] = 53,
> +	[CMDQ_EVENT_MUTEX1_STREAM_EOF] = 54,
> +	[CMDQ_EVENT_MUTEX2_STREAM_EOF] = 55,
> +	[CMDQ_EVENT_MUTEX3_STREAM_EOF] = 56,
> +	[CMDQ_EVENT_MUTEX4_STREAM_EOF] = 57,
> +	/* Display underrun events */
> +	[CMDQ_EVENT_DISP_RDMA0_UNDERRUN] = 63,
> +	[CMDQ_EVENT_DISP_RDMA1_UNDERRUN] = 64,
> +	[CMDQ_EVENT_DISP_RDMA2_UNDERRUN] = 65,
> +};
> +
> +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, enum cmdq_event event)
> +{
> +	u32 arg_b;
> +
> +	if (event >= CMDQ_MAX_EVENT || event < 0)
> +		return -EINVAL;
> +
> +	/*
> +	 * WFE arg_b
> +	 * bit 0-11: wait value
> +	 * bit 15: 1 - wait, 0 - no wait
> +	 * bit 16-27: update value
> +	 * bit 31: 1 - update, 0 - no update
> +	 */
> +	arg_b = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
> +	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE,
> +			cmdq_event_value[event], arg_b);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_wfe);
> +
> +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, enum cmdq_event event)
> +{
> +	if (event >= CMDQ_MAX_EVENT || event < 0)
> +		return -EINVAL;
> +
> +	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE,
> +			cmdq_event_value[event], CMDQ_WFE_UPDATE);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_clear_event);
> +
> +static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
> +{
> +	int err;
> +
> +	if (cmdq_pkt_is_finalized(pkt))
> +		return 0;
> +
> +	/* insert EOC and generate IRQ for each command iteration */
> +	err = cmdq_pkt_append_command(pkt, CMDQ_CODE_EOC, 0, CMDQ_EOC_IRQ_EN);
> +	if (err < 0)
> +		return err;
> +
> +	/* JUMP to end */
> +	err = cmdq_pkt_append_command(pkt, CMDQ_CODE_JUMP, 0, CMDQ_JUMP_PASS);
> +	if (err < 0)
> +		return err;
> +
> +	return 0;
> +}
> +
> +int cmdq_pkt_flush_async(struct cmdq_client *client, struct cmdq_pkt *pkt,
> +			 cmdq_async_flush_cb cb, void *data)
> +{
> +	int err;
> +	struct device *dev;
> +	dma_addr_t dma_addr;
> +
> +	err = cmdq_pkt_finalize(pkt);
> +	if (err < 0)
> +		return err;
> +
> +	dev = client->chan->mbox->dev;
> +	dma_addr = dma_map_single(dev, pkt->va_base, pkt->cmd_buf_size,
> +		DMA_TO_DEVICE);
> +	if (dma_mapping_error(dev, dma_addr)) {
> +		dev_err(client->chan->mbox->dev, "dma map failed\n");
> +		return -ENOMEM;
> +	}
> +
> +	pkt->pa_base = dma_addr;
> +	pkt->cb.cb = cb;
> +	pkt->cb.data = data;
> +
> +	mbox_send_message(client->chan, pkt);
> +	/* We can send next packet immediately, so just call txdone. */
> +	mbox_client_txdone(client->chan, 0);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(cmdq_pkt_flush_async);
> +
> +struct cmdq_flush_completion {
> +	struct completion cmplt;
> +	bool err;
> +};
> +
> +static void cmdq_pkt_flush_cb(struct cmdq_cb_data data)
> +{
> +	struct cmdq_flush_completion *cmplt = data.data;
> +
> +	cmplt->err = data.err;
> +	complete(&cmplt->cmplt);
> +}
> +
> +int cmdq_pkt_flush(struct cmdq_client *client, struct cmdq_pkt *pkt)
> +{
> +	struct cmdq_flush_completion cmplt;
> +	int err;
> +
> +	init_completion(&cmplt.cmplt);
> +	err = cmdq_pkt_flush_async(client, pkt, cmdq_pkt_flush_cb, &cmplt);
> +	if (err < 0)
> +		return err;
> +	wait_for_completion(&cmplt.cmplt);
> +	return cmplt.err ? -EFAULT : 0;
> +}
> +EXPORT_SYMBOL(cmdq_pkt_flush);
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> new file mode 100644
> index 0000000..5b35d73
> --- /dev/null
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -0,0 +1,174 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __MTK_CMDQ_H__
> +#define __MTK_CMDQ_H__
> +
> +#include <linux/mailbox_client.h>
> +#include <linux/mailbox/mtk-cmdq-mailbox.h>
> +
> +/* display events in command queue(CMDQ) */
> +enum cmdq_event {
> +	/* Display start of frame(SOF) events */
> +	CMDQ_EVENT_DISP_OVL0_SOF,
> +	CMDQ_EVENT_DISP_OVL1_SOF,
> +	CMDQ_EVENT_DISP_RDMA0_SOF,
> +	CMDQ_EVENT_DISP_RDMA1_SOF,
> +	CMDQ_EVENT_DISP_RDMA2_SOF,
> +	CMDQ_EVENT_DISP_WDMA0_SOF,
> +	CMDQ_EVENT_DISP_WDMA1_SOF,
> +	/* Display end of frame(EOF) events */
> +	CMDQ_EVENT_DISP_OVL0_EOF,
> +	CMDQ_EVENT_DISP_OVL1_EOF,
> +	CMDQ_EVENT_DISP_RDMA0_EOF,
> +	CMDQ_EVENT_DISP_RDMA1_EOF,
> +	CMDQ_EVENT_DISP_RDMA2_EOF,
> +	CMDQ_EVENT_DISP_WDMA0_EOF,
> +	CMDQ_EVENT_DISP_WDMA1_EOF,
> +	/* Mutex end of frame(EOF) events */
> +	CMDQ_EVENT_MUTEX0_STREAM_EOF,
> +	CMDQ_EVENT_MUTEX1_STREAM_EOF,
> +	CMDQ_EVENT_MUTEX2_STREAM_EOF,
> +	CMDQ_EVENT_MUTEX3_STREAM_EOF,
> +	CMDQ_EVENT_MUTEX4_STREAM_EOF,
> +	/* Display underrun events */
> +	CMDQ_EVENT_DISP_RDMA0_UNDERRUN,
> +	CMDQ_EVENT_DISP_RDMA1_UNDERRUN,
> +	CMDQ_EVENT_DISP_RDMA2_UNDERRUN,
> +	/* Keep this at the end */
> +	CMDQ_MAX_EVENT,
> +};
> +
> +struct cmdq_pkt;
> +
> +struct cmdq_base {
> +	int	subsys;
> +	u32	base;
> +};
> +
> +struct cmdq_client {
> +	struct mbox_client client;
> +	struct mbox_chan *chan;
> +};
> +
> +/**
> + * cmdq_register_device() - register device which needs CMDQ
> + * @dev:	device for CMDQ to access its registers
> + *
> + * Return: cmdq_base pointer or NULL for failed
> + */
> +struct cmdq_base *cmdq_register_device(struct device *dev);
> +
> +/**
> + * cmdq_mbox_create() - create CMDQ mailbox client and channel
> + * @dev:	device of CMDQ mailbox client
> + * @index:	index of CMDQ mailbox channel
> + *
> + * Return: CMDQ mailbox client pointer
> + */
> +struct cmdq_client *cmdq_mbox_create(struct device *dev, int index);
> +
> +/**
> + * cmdq_mbox_destroy() - destroy CMDQ mailbox client and channel
> + * @client:	the CMDQ mailbox client
> + */
> +void cmdq_mbox_destroy(struct cmdq_client *client);
> +
> +/**
> + * cmdq_pkt_create() - create a CMDQ packet
> + * @pkt_ptr:	CMDQ packet pointer to retrieve cmdq_pkt
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_pkt_create(struct cmdq_pkt **pkt_ptr);
> +
> +/**
> + * cmdq_pkt_destroy() - destroy the CMDQ packet
> + * @pkt:	the CMDQ packet
> + */
> +void cmdq_pkt_destroy(struct cmdq_pkt *pkt);
> +
> +/**
> + * cmdq_pkt_write() - append write command to the CMDQ packet
> + * @pkt:	the CMDQ packet
> + * @value:	the specified target register value
> + * @base:	the CMDQ base
> + * @offset:	register offset from module base
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value,
> +		   struct cmdq_base *base, u32 offset);
> +
> +/**
> + * cmdq_pkt_write_mask() - append write command with mask to the CMDQ packet
> + * @pkt:	the CMDQ packet
> + * @value:	the specified target register value
> + * @base:	the CMDQ base
> + * @offset:	register offset from module base
> + * @mask:	the specified target register mask
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> +			struct cmdq_base *base, u32 offset, u32 mask);
> +
> +/**
> + * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
> + * @pkt:	the CMDQ packet
> + * @event:	the desired event type to "wait and CLEAR"
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, enum cmdq_event event);
> +
> +/**
> + * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
> + * @pkt:	the CMDQ packet
> + * @event:	the desired event to be cleared
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, enum cmdq_event event);
> +
> +/**
> + * cmdq_pkt_flush() - trigger CMDQ to execute the CMDQ packet
> + * @client:	the CMDQ mailbox client
> + * @pkt:	the CMDQ packet
> + *
> + * Return: 0 for success; else the error code is returned
> + *
> + * Trigger CMDQ to execute the CMDQ packet. Note that this is a
> + * synchronous flush function. When the function returned, the recorded
> + * commands have been done.
> + */
> +int cmdq_pkt_flush(struct cmdq_client *client, struct cmdq_pkt *pkt);
> +
> +/**
> + * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
> + *                          packet and call back at the end of done packet
> + * @client:	the CMDQ mailbox client
> + * @pkt:	the CMDQ packet
> + * @cb:		called at the end of done packet
> + * @data:	this data will pass back to cb
> + *
> + * Return: 0 for success; else the error code is returned
> + *
> + * Trigger CMDQ to asynchronously execute the CMDQ packet and call back
> + * at the end of done packet. Note that this is an ASYNC function. When the
> + * function returned, it may or may not be finished.
> + */
> +int cmdq_pkt_flush_async(struct cmdq_client *client, struct cmdq_pkt *pkt,
> +			 cmdq_async_flush_cb cb, void *data);
> +
> +#endif	/* __MTK_CMDQ_H__ */

[PATCH v21 4/4] soc: mediatek: Add Mediatek CMDQ helper

[houlong wei]

On Wed, 2018-02-21 at 16:05 +0800, CK Hu wrote:
> Hi, Houlong:
> 
> I've one more inline comment.
> 
> On Wed, 2018-01-31 at 15:28 +0800, houlong.wei at mediatek.com wrote:
> > From: "hs.liao at mediatek.com" <hs.liao@mediatek.com>
> > 
> > Add Mediatek CMDQ helper to create CMDQ packet and assemble GCE op code.
> > 
> > Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
> > Signed-off-by: HS Liao <hs.liao@mediatek.com>
> > ---
> >  drivers/soc/mediatek/Kconfig           |   12 ++
> >  drivers/soc/mediatek/Makefile          |    1 +
> >  drivers/soc/mediatek/mtk-cmdq-helper.c |  322 ++++++++++++++++++++++++++++++++
> >  include/linux/soc/mediatek/mtk-cmdq.h  |  174 +++++++++++++++++
> >  4 files changed, 509 insertions(+)
> >  create mode 100644 drivers/soc/mediatek/mtk-cmdq-helper.c
> >  create mode 100644 include/linux/soc/mediatek/mtk-cmdq.h
> > 
> > diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> > index a7d0667..e66582e 100644
> > --- a/drivers/soc/mediatek/Kconfig
> > +++ b/drivers/soc/mediatek/Kconfig
> > @@ -4,6 +4,18 @@
> >  menu "MediaTek SoC drivers"
> >  	depends on ARCH_MEDIATEK || COMPILE_TEST
> >  
> > +config MTK_CMDQ
> > +	bool "MediaTek CMDQ Support"
> > +	depends on ARM64 && ( ARCH_MEDIATEK || COMPILE_TEST )
> > +	select MAILBOX
> > +	select MTK_CMDQ_MBOX
> > +	select MTK_INFRACFG
> > +	help
> > +	  Say yes here to add support for the MediaTek Command Queue (CMDQ)
> > +	  driver. The CMDQ is used to help read/write registers with critical
> > +	  time limitation, such as updating display configuration during the
> > +	  vblank.
> > +
> >  config MTK_INFRACFG
> >  	bool "MediaTek INFRACFG Support"
> >  	select REGMAP
> > diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> > index 12998b0..64ce5ee 100644
> > --- a/drivers/soc/mediatek/Makefile
> > +++ b/drivers/soc/mediatek/Makefile
> > @@ -1,3 +1,4 @@
> > +obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o
> >  obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
> >  obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
> >  obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > new file mode 100644
> > index 0000000..80d0558
> > --- /dev/null
> > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > @@ -0,0 +1,322 @@
> > +/*
> > + * Copyright (c) 2015 MediaTek Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/completion.h>
> > +#include <linux/errno.h>
> > +#include <linux/of_address.h>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/mailbox_controller.h>
> > +#include <linux/soc/mediatek/mtk-cmdq.h>
> > +
> > +#define CMDQ_ARG_A_WRITE_MASK	0xffff
> > +#define CMDQ_WRITE_ENABLE_MASK	BIT(0)
> > +#define CMDQ_EOC_IRQ_EN		BIT(0)
> > +#define CMDQ_EOC_CMD		((u64)((CMDQ_CODE_EOC << CMDQ_OP_CODE_SHIFT)) \
> > +				<< 32 | CMDQ_EOC_IRQ_EN)
> > +
> > +struct cmdq_subsys {
> > +	u32	base;
> > +	int	id;
> > +};
> > +
> > +static const struct cmdq_subsys gce_subsys[] = {
> > +	{0x1400, 1},
> > +	{0x1401, 2},
> > +	{0x1402, 3},
> > +};
> > +
> > +static int cmdq_subsys_base_to_id(u32 base)
> > +{
> > +	int i;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(gce_subsys); i++)
> > +		if (gce_subsys[i].base == base)
> > +			return gce_subsys[i].id;
> > +	return -EFAULT;
> > +}
> > +
> > +static int cmdq_pkt_realloc_cmd_buffer(struct cmdq_pkt *pkt, size_t size)
> > +{
> > +	void *new_buf;
> > +
> > +	new_buf = krealloc(pkt->va_base, size, GFP_KERNEL | __GFP_ZERO);
> > +	if (!new_buf)
> > +		return -ENOMEM;
> > +	pkt->va_base = new_buf;
> > +	pkt->buf_size = size;
> > +	return 0;
> > +}
> > +
> > +struct cmdq_base *cmdq_register_device(struct device *dev)
> > +{
> > +	struct cmdq_base *cmdq_base;
> > +	struct resource res;
> > +	int subsys;
> > +	u32 base;
> > +
> > +	if (of_address_to_resource(dev->of_node, 0, &res))
> > +		return NULL;
> > +	base = (u32)res.start;
> > +
> > +	subsys = cmdq_subsys_base_to_id(base >> 16);
> > +	if (subsys < 0)
> > +		return NULL;
> > +
> > +	cmdq_base = devm_kmalloc(dev, sizeof(*cmdq_base), GFP_KERNEL);
> > +	if (!cmdq_base)
> > +		return NULL;
> > +	cmdq_base->subsys = subsys;
> > +	cmdq_base->base = base;
> > +
> > +	return cmdq_base;
> > +}
> > +EXPORT_SYMBOL(cmdq_register_device);
> > +
> > +struct cmdq_client *cmdq_mbox_create(struct device *dev, int index)
> > +{
> > +	struct cmdq_client *client;
> > +
> > +	client = kzalloc(sizeof(*client), GFP_KERNEL);
> > +	client->client.dev = dev;
> > +	client->client.tx_block = false;
> > +	client->chan = mbox_request_channel(&client->client, index);
> > +	return client;
> > +}
> > +EXPORT_SYMBOL(cmdq_mbox_create);
> > +
> > +void cmdq_mbox_destroy(struct cmdq_client *client)
> > +{
> > +	mbox_free_channel(client->chan);
> > +	kfree(client);
> > +}
> > +EXPORT_SYMBOL(cmdq_mbox_destroy);
> > +
> > +int cmdq_pkt_create(struct cmdq_pkt **pkt_ptr)
> > +{
> > +	struct cmdq_pkt *pkt;
> > +	int err;
> > +
> > +	pkt = kzalloc(sizeof(*pkt), GFP_KERNEL);
> > +	if (!pkt)
> > +		return -ENOMEM;
> > +	err = cmdq_pkt_realloc_cmd_buffer(pkt, PAGE_SIZE);
> > +	if (err < 0) {
> > +		kfree(pkt);
> > +		return err;
> > +	}
> > +	*pkt_ptr = pkt;
> > +	return 0;
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_create);
> > +
> > +void cmdq_pkt_destroy(struct cmdq_pkt *pkt)
> > +{
> > +	kfree(pkt->va_base);
> > +	kfree(pkt);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_destroy);
> > +
> > +static bool cmdq_pkt_is_finalized(struct cmdq_pkt *pkt)
> > +{
> > +	u64 *expect_eoc;
> > +
> > +	if (pkt->cmd_buf_size < CMDQ_INST_SIZE << 1)
> > +		return false;
> > +
> > +	expect_eoc = pkt->va_base + pkt->cmd_buf_size - (CMDQ_INST_SIZE << 1);
> > +	if (*expect_eoc == CMDQ_EOC_CMD)
> > +		return true;
> > +
> > +	return false;
> > +}
> > +
> > +static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
> > +				   u32 arg_a, u32 arg_b)
> > +{
> > +	u64 *cmd_ptr;
> > +	int err;
> > +
> > +	if (WARN_ON(cmdq_pkt_is_finalized(pkt)))
> > +		return -EBUSY;
> > +	if (unlikely(pkt->cmd_buf_size + CMDQ_INST_SIZE > pkt->buf_size)) {
> > +		err = cmdq_pkt_realloc_cmd_buffer(pkt, pkt->buf_size << 1);
> 
> In your design, the command buffer is frequently allocated and freed.
> But client may not want this mechanism because it have penalty on CPU
> loading and may have risk of allocation failure. The client may
> pre-allocate the command buffer and reuse it. So it's better to let
> client decide which buffer management it want. That means cmdq helper do
> not allocate command buffer and do not reallocate it. The working flow
> would be:
> 
> For client that want to pre-allocate buffer:
> (1) Client pre-allocate a command buffer with a pre-calculated size.
> (Programmer should make sure that all command would not exceed this
> size)
> (2) Client use cmdq helper function to generate command in command
> buffer. If command buffer is full, helper still increase
> pkt->cmd_buf_size but do not write command into command buffer.
> (3) When client flush packet, cmdq helper could check whether
> pkt->cmd_buf_size is greater than pkt->buf_size, if so, return error and
> programmer should modify the pre-calculated size in step (1).
> (4) Wait for command done.
> (5) Set pkt->cmd_buf_size to zero and directly goto step (2) to reuse
> this command buffer.
> 
> For client that want to dynamically allocate buffer:
> (1) Client dynamically allocate a command buffer with a initial size,
> for example, 1024 bytes.
> (2) Client use cmdq helper function to generate command in command
> buffer. If command buffer is full, helper still increase
> pkt->cmd_buf_size but do not write command into command buffer.
> (3) When client flush packet, cmdq helper could check whether
> pkt->cmd_buf_size is greater than pkt->buf_size, if so, return error and
> client goto step (1) and reallocate a command buffer with pkt->buf_size.
> (4) Wait for command done.
> (5) Free the command buffer.
> 
> Because the reallocation is so complicated, for client that want to
> dynamically allocate buffer, the initial buffer size could also be
> pre-calculated that you need not to reallocate it. Once the buffer is
> full, programmer should also fix the accurate buffer size.
> 
> Regards,
> CK
> 

Hi CK, thanks for your explanation and suggestion. Currently, the cmdq
buffer is allocated in cmdq_pkt_create and its initial size is
PAGE_SIZE. In most case of display scenario, PAGE_SIZE(4096) bytes are
enough.

> > +		if (err < 0)
> > +			return err;
> > +	}
> > +	cmd_ptr = pkt->va_base + pkt->cmd_buf_size;
> > +	(*cmd_ptr) = (u64)((code << CMDQ_OP_CODE_SHIFT) | arg_a) << 32 | arg_b;
> > +	pkt->cmd_buf_size += CMDQ_INST_SIZE;
> > +	return 0;
> > +}
> > +
> > +int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, struct cmdq_base *base,
> > +		   u32 offset)
> > +{
> > +	u32 arg_a = ((base->base + offset) & CMDQ_ARG_A_WRITE_MASK) |
> > +		    (base->subsys << CMDQ_SUBSYS_SHIFT);
> > +	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WRITE, arg_a, value);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_write);
> > +
> > +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> > +			struct cmdq_base *base, u32 offset, u32 mask)
> > +{
> > +	u32 offset_mask = offset;
> > +	int err;
> > +
> > +	if (mask != 0xffffffff) {
> > +		err = cmdq_pkt_append_command(pkt, CMDQ_CODE_MASK, 0, ~mask);
> > +		if (err < 0)
> > +			return err;
> > +		offset_mask |= CMDQ_WRITE_ENABLE_MASK;
> > +	}
> > +	return cmdq_pkt_write(pkt, value, base, offset_mask);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_write_mask);
> > +
> > +static const u32 cmdq_event_value[CMDQ_MAX_EVENT] = {
> > +	/* Display start of frame(SOF) events */
> > +	[CMDQ_EVENT_DISP_OVL0_SOF] = 11,
> > +	[CMDQ_EVENT_DISP_OVL1_SOF] = 12,
> > +	[CMDQ_EVENT_DISP_RDMA0_SOF] = 13,
> > +	[CMDQ_EVENT_DISP_RDMA1_SOF] = 14,
> > +	[CMDQ_EVENT_DISP_RDMA2_SOF] = 15,
> > +	[CMDQ_EVENT_DISP_WDMA0_SOF] = 16,
> > +	[CMDQ_EVENT_DISP_WDMA1_SOF] = 17,
> > +	/* Display end of frame(EOF) events */
> > +	[CMDQ_EVENT_DISP_OVL0_EOF] = 39,
> > +	[CMDQ_EVENT_DISP_OVL1_EOF] = 40,
> > +	[CMDQ_EVENT_DISP_RDMA0_EOF] = 41,
> > +	[CMDQ_EVENT_DISP_RDMA1_EOF] = 42,
> > +	[CMDQ_EVENT_DISP_RDMA2_EOF] = 43,
> > +	[CMDQ_EVENT_DISP_WDMA0_EOF] = 44,
> > +	[CMDQ_EVENT_DISP_WDMA1_EOF] = 45,
> > +	/* Mutex end of frame(EOF) events */
> > +	[CMDQ_EVENT_MUTEX0_STREAM_EOF] = 53,
> > +	[CMDQ_EVENT_MUTEX1_STREAM_EOF] = 54,
> > +	[CMDQ_EVENT_MUTEX2_STREAM_EOF] = 55,
> > +	[CMDQ_EVENT_MUTEX3_STREAM_EOF] = 56,
> > +	[CMDQ_EVENT_MUTEX4_STREAM_EOF] = 57,
> > +	/* Display underrun events */
> > +	[CMDQ_EVENT_DISP_RDMA0_UNDERRUN] = 63,
> > +	[CMDQ_EVENT_DISP_RDMA1_UNDERRUN] = 64,
> > +	[CMDQ_EVENT_DISP_RDMA2_UNDERRUN] = 65,
> > +};
> > +
> > +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, enum cmdq_event event)
> > +{
> > +	u32 arg_b;
> > +
> > +	if (event >= CMDQ_MAX_EVENT || event < 0)
> > +		return -EINVAL;
> > +
> > +	/*
> > +	 * WFE arg_b
> > +	 * bit 0-11: wait value
> > +	 * bit 15: 1 - wait, 0 - no wait
> > +	 * bit 16-27: update value
> > +	 * bit 31: 1 - update, 0 - no update
> > +	 */
> > +	arg_b = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
> > +	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE,
> > +			cmdq_event_value[event], arg_b);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_wfe);
> > +
> > +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, enum cmdq_event event)
> > +{
> > +	if (event >= CMDQ_MAX_EVENT || event < 0)
> > +		return -EINVAL;
> > +
> > +	return cmdq_pkt_append_command(pkt, CMDQ_CODE_WFE,
> > +			cmdq_event_value[event], CMDQ_WFE_UPDATE);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_clear_event);
> > +
> > +static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
> > +{
> > +	int err;
> > +
> > +	if (cmdq_pkt_is_finalized(pkt))
> > +		return 0;
> > +
> > +	/* insert EOC and generate IRQ for each command iteration */
> > +	err = cmdq_pkt_append_command(pkt, CMDQ_CODE_EOC, 0, CMDQ_EOC_IRQ_EN);
> > +	if (err < 0)
> > +		return err;
> > +
> > +	/* JUMP to end */
> > +	err = cmdq_pkt_append_command(pkt, CMDQ_CODE_JUMP, 0, CMDQ_JUMP_PASS);
> > +	if (err < 0)
> > +		return err;
> > +
> > +	return 0;
> > +}
> > +
> > +int cmdq_pkt_flush_async(struct cmdq_client *client, struct cmdq_pkt *pkt,
> > +			 cmdq_async_flush_cb cb, void *data)
> > +{
> > +	int err;
> > +	struct device *dev;
> > +	dma_addr_t dma_addr;
> > +
> > +	err = cmdq_pkt_finalize(pkt);
> > +	if (err < 0)
> > +		return err;
> > +
> > +	dev = client->chan->mbox->dev;
> > +	dma_addr = dma_map_single(dev, pkt->va_base, pkt->cmd_buf_size,
> > +		DMA_TO_DEVICE);
> > +	if (dma_mapping_error(dev, dma_addr)) {
> > +		dev_err(client->chan->mbox->dev, "dma map failed\n");
> > +		return -ENOMEM;
> > +	}
> > +
> > +	pkt->pa_base = dma_addr;
> > +	pkt->cb.cb = cb;
> > +	pkt->cb.data = data;
> > +
> > +	mbox_send_message(client->chan, pkt);
> > +	/* We can send next packet immediately, so just call txdone. */
> > +	mbox_client_txdone(client->chan, 0);
> > +
> > +	return 0;
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_flush_async);
> > +
> > +struct cmdq_flush_completion {
> > +	struct completion cmplt;
> > +	bool err;
> > +};
> > +
> > +static void cmdq_pkt_flush_cb(struct cmdq_cb_data data)
> > +{
> > +	struct cmdq_flush_completion *cmplt = data.data;
> > +
> > +	cmplt->err = data.err;
> > +	complete(&cmplt->cmplt);
> > +}
> > +
> > +int cmdq_pkt_flush(struct cmdq_client *client, struct cmdq_pkt *pkt)
> > +{
> > +	struct cmdq_flush_completion cmplt;
> > +	int err;
> > +
> > +	init_completion(&cmplt.cmplt);
> > +	err = cmdq_pkt_flush_async(client, pkt, cmdq_pkt_flush_cb, &cmplt);
> > +	if (err < 0)
> > +		return err;
> > +	wait_for_completion(&cmplt.cmplt);
> > +	return cmplt.err ? -EFAULT : 0;
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_flush);
> > diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> > new file mode 100644
> > index 0000000..5b35d73
> > --- /dev/null
> > +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> > @@ -0,0 +1,174 @@
> > +/*
> > + * Copyright (c) 2015 MediaTek Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#ifndef __MTK_CMDQ_H__
> > +#define __MTK_CMDQ_H__
> > +
> > +#include <linux/mailbox_client.h>
> > +#include <linux/mailbox/mtk-cmdq-mailbox.h>
> > +
> > +/* display events in command queue(CMDQ) */
> > +enum cmdq_event {
> > +	/* Display start of frame(SOF) events */
> > +	CMDQ_EVENT_DISP_OVL0_SOF,
> > +	CMDQ_EVENT_DISP_OVL1_SOF,
> > +	CMDQ_EVENT_DISP_RDMA0_SOF,
> > +	CMDQ_EVENT_DISP_RDMA1_SOF,
> > +	CMDQ_EVENT_DISP_RDMA2_SOF,
> > +	CMDQ_EVENT_DISP_WDMA0_SOF,
> > +	CMDQ_EVENT_DISP_WDMA1_SOF,
> > +	/* Display end of frame(EOF) events */
> > +	CMDQ_EVENT_DISP_OVL0_EOF,
> > +	CMDQ_EVENT_DISP_OVL1_EOF,
> > +	CMDQ_EVENT_DISP_RDMA0_EOF,
> > +	CMDQ_EVENT_DISP_RDMA1_EOF,
> > +	CMDQ_EVENT_DISP_RDMA2_EOF,
> > +	CMDQ_EVENT_DISP_WDMA0_EOF,
> > +	CMDQ_EVENT_DISP_WDMA1_EOF,
> > +	/* Mutex end of frame(EOF) events */
> > +	CMDQ_EVENT_MUTEX0_STREAM_EOF,
> > +	CMDQ_EVENT_MUTEX1_STREAM_EOF,
> > +	CMDQ_EVENT_MUTEX2_STREAM_EOF,
> > +	CMDQ_EVENT_MUTEX3_STREAM_EOF,
> > +	CMDQ_EVENT_MUTEX4_STREAM_EOF,
> > +	/* Display underrun events */
> > +	CMDQ_EVENT_DISP_RDMA0_UNDERRUN,
> > +	CMDQ_EVENT_DISP_RDMA1_UNDERRUN,
> > +	CMDQ_EVENT_DISP_RDMA2_UNDERRUN,
> > +	/* Keep this at the end */
> > +	CMDQ_MAX_EVENT,
> > +};
> > +
> > +struct cmdq_pkt;
> > +
> > +struct cmdq_base {
> > +	int	subsys;
> > +	u32	base;
> > +};
> > +
> > +struct cmdq_client {
> > +	struct mbox_client client;
> > +	struct mbox_chan *chan;
> > +};
> > +
> > +/**
> > + * cmdq_register_device() - register device which needs CMDQ
> > + * @dev:	device for CMDQ to access its registers
> > + *
> > + * Return: cmdq_base pointer or NULL for failed
> > + */
> > +struct cmdq_base *cmdq_register_device(struct device *dev);
> > +
> > +/**
> > + * cmdq_mbox_create() - create CMDQ mailbox client and channel
> > + * @dev:	device of CMDQ mailbox client
> > + * @index:	index of CMDQ mailbox channel
> > + *
> > + * Return: CMDQ mailbox client pointer
> > + */
> > +struct cmdq_client *cmdq_mbox_create(struct device *dev, int index);
> > +
> > +/**
> > + * cmdq_mbox_destroy() - destroy CMDQ mailbox client and channel
> > + * @client:	the CMDQ mailbox client
> > + */
> > +void cmdq_mbox_destroy(struct cmdq_client *client);
> > +
> > +/**
> > + * cmdq_pkt_create() - create a CMDQ packet
> > + * @pkt_ptr:	CMDQ packet pointer to retrieve cmdq_pkt
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_create(struct cmdq_pkt **pkt_ptr);
> > +
> > +/**
> > + * cmdq_pkt_destroy() - destroy the CMDQ packet
> > + * @pkt:	the CMDQ packet
> > + */
> > +void cmdq_pkt_destroy(struct cmdq_pkt *pkt);
> > +
> > +/**
> > + * cmdq_pkt_write() - append write command to the CMDQ packet
> > + * @pkt:	the CMDQ packet
> > + * @value:	the specified target register value
> > + * @base:	the CMDQ base
> > + * @offset:	register offset from module base
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value,
> > +		   struct cmdq_base *base, u32 offset);
> > +
> > +/**
> > + * cmdq_pkt_write_mask() - append write command with mask to the CMDQ packet
> > + * @pkt:	the CMDQ packet
> > + * @value:	the specified target register value
> > + * @base:	the CMDQ base
> > + * @offset:	register offset from module base
> > + * @mask:	the specified target register mask
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
> > +			struct cmdq_base *base, u32 offset, u32 mask);
> > +
> > +/**
> > + * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
> > + * @pkt:	the CMDQ packet
> > + * @event:	the desired event type to "wait and CLEAR"
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, enum cmdq_event event);
> > +
> > +/**
> > + * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
> > + * @pkt:	the CMDQ packet
> > + * @event:	the desired event to be cleared
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, enum cmdq_event event);
> > +
> > +/**
> > + * cmdq_pkt_flush() - trigger CMDQ to execute the CMDQ packet
> > + * @client:	the CMDQ mailbox client
> > + * @pkt:	the CMDQ packet
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + *
> > + * Trigger CMDQ to execute the CMDQ packet. Note that this is a
> > + * synchronous flush function. When the function returned, the recorded
> > + * commands have been done.
> > + */
> > +int cmdq_pkt_flush(struct cmdq_client *client, struct cmdq_pkt *pkt);
> > +
> > +/**
> > + * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
> > + *                          packet and call back at the end of done packet
> > + * @client:	the CMDQ mailbox client
> > + * @pkt:	the CMDQ packet
> > + * @cb:		called at the end of done packet
> > + * @data:	this data will pass back to cb
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + *
> > + * Trigger CMDQ to asynchronously execute the CMDQ packet and call back
> > + * at the end of done packet. Note that this is an ASYNC function. When the
> > + * function returned, it may or may not be finished.
> > + */
> > +int cmdq_pkt_flush_async(struct cmdq_client *client, struct cmdq_pkt *pkt,
> > +			 cmdq_async_flush_cb cb, void *data);
> > +
> > +#endif	/* __MTK_CMDQ_H__ */
> 
> 

[PATCH v21 4/4] soc: mediatek: Add Mediatek CMDQ helper

[CK Hu]

Hi, Houlong:

On Wed, 2018-06-27 at 19:43 +0800, houlong wei wrote:
> On Wed, 2018-02-21 at 16:05 +0800, CK Hu wrote:
> > Hi, Houlong:
> > 
> > I've one more inline comment.
> > 
> > On Wed, 2018-01-31 at 15:28 +0800, houlong.wei at mediatek.com wrote:
> > > From: "hs.liao at mediatek.com" <hs.liao@mediatek.com>
> > > 
> > > Add Mediatek CMDQ helper to create CMDQ packet and assemble GCE op code.
> > > 
> > > Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
> > > Signed-off-by: HS Liao <hs.liao@mediatek.com>
> > > ---
> > >  drivers/soc/mediatek/Kconfig           |   12 ++
> > >  drivers/soc/mediatek/Makefile          |    1 +
> > >  drivers/soc/mediatek/mtk-cmdq-helper.c |  322 ++++++++++++++++++++++++++++++++
> > >  include/linux/soc/mediatek/mtk-cmdq.h  |  174 +++++++++++++++++
> > >  4 files changed, 509 insertions(+)
> > >  create mode 100644 drivers/soc/mediatek/mtk-cmdq-helper.c
> > >  create mode 100644 include/linux/soc/mediatek/mtk-cmdq.h
> > > 
> > > diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> > > index a7d0667..e66582e 100644
> > > --- a/drivers/soc/mediatek/Kconfig
> > > +++ b/drivers/soc/mediatek/Kconfig
> > > @@ -4,6 +4,18 @@
> > >  menu "MediaTek SoC drivers"
> > >  	depends on ARCH_MEDIATEK || COMPILE_TEST
> > >  

[...]

> > > +
> > > +static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
> > > +				   u32 arg_a, u32 arg_b)
> > > +{
> > > +	u64 *cmd_ptr;
> > > +	int err;
> > > +
> > > +	if (WARN_ON(cmdq_pkt_is_finalized(pkt)))
> > > +		return -EBUSY;
> > > +	if (unlikely(pkt->cmd_buf_size + CMDQ_INST_SIZE > pkt->buf_size)) {
> > > +		err = cmdq_pkt_realloc_cmd_buffer(pkt, pkt->buf_size << 1);
> > 
> > In your design, the command buffer is frequently allocated and freed.
> > But client may not want this mechanism because it have penalty on CPU
> > loading and may have risk of allocation failure. The client may
> > pre-allocate the command buffer and reuse it. So it's better to let
> > client decide which buffer management it want. That means cmdq helper do
> > not allocate command buffer and do not reallocate it. The working flow
> > would be:
> > 
> > For client that want to pre-allocate buffer:
> > (1) Client pre-allocate a command buffer with a pre-calculated size.
> > (Programmer should make sure that all command would not exceed this
> > size)
> > (2) Client use cmdq helper function to generate command in command
> > buffer. If command buffer is full, helper still increase
> > pkt->cmd_buf_size but do not write command into command buffer.
> > (3) When client flush packet, cmdq helper could check whether
> > pkt->cmd_buf_size is greater than pkt->buf_size, if so, return error and
> > programmer should modify the pre-calculated size in step (1).
> > (4) Wait for command done.
> > (5) Set pkt->cmd_buf_size to zero and directly goto step (2) to reuse
> > this command buffer.
> > 
> > For client that want to dynamically allocate buffer:
> > (1) Client dynamically allocate a command buffer with a initial size,
> > for example, 1024 bytes.
> > (2) Client use cmdq helper function to generate command in command
> > buffer. If command buffer is full, helper still increase
> > pkt->cmd_buf_size but do not write command into command buffer.
> > (3) When client flush packet, cmdq helper could check whether
> > pkt->cmd_buf_size is greater than pkt->buf_size, if so, return error and
> > client goto step (1) and reallocate a command buffer with pkt->buf_size.
> > (4) Wait for command done.
> > (5) Free the command buffer.
> > 
> > Because the reallocation is so complicated, for client that want to
> > dynamically allocate buffer, the initial buffer size could also be
> > pre-calculated that you need not to reallocate it. Once the buffer is
> > full, programmer should also fix the accurate buffer size.
> > 
> > Regards,
> > CK
> > 
> 
> Hi CK, thanks for your explanation and suggestion. Currently, the cmdq
> buffer is allocated in cmdq_pkt_create and its initial size is
> PAGE_SIZE. In most case of display scenario, PAGE_SIZE(4096) bytes are
> enough.
> 

You use the tern 'most' means you still need to consider the size over
PAGE_SIZE. If in current application, PAGE_SIZE is enough for display, I
think you still should remove this reallocation in the first patch
because you need not to reallocation. Once the display need more than
PAGE_SIZE, you send the another patch that support client to set the
initial size. I think we should make the first patch as simple as
possible, and you could add another patch to improve it.

Regards,
CK

> > > +		if (err < 0)
> > > +			return err;
> > > +	}
> > > +	cmd_ptr = pkt->va_base + pkt->cmd_buf_size;
> > > +	(*cmd_ptr) = (u64)((code << CMDQ_OP_CODE_SHIFT) | arg_a) << 32 | arg_b;
> > > +	pkt->cmd_buf_size += CMDQ_INST_SIZE;
> > > +	return 0;
> > > +}
> > > +

[...]
> 
>