[PATCH v5 0/3] Enable mdss1 Display Port for Qualcomm lemans-ride platform

[PATCH v5 0/3] Enable mdss1 Display Port for Qualcomm lemans-ride platform

[Mani Chandana Ballary Kuntumalla]

This series adds the DPTX0 and DPTX1 nodes, as a part of mdss1
on Qualcomm lemans SoC. It also enables Display Port on Qualcomm
lemans-ride and lemans-evk-ifp-mezzanine platforms.

---
This series is dependent on below series:
https://lore.kernel.org/all/20260128114853.2543416-1-quic_riteshk@quicinc.com/

Change in v5:
- Moved OPP tables inside the mdss0 and mdss0_dp0 nodes and reused them for other nodes. [Konrad]
- Added newline before subnode. [Konrad]
- Included lemans-evk-ifp-mezzanine patch: https://lore.kernel.org/lkml/20260219-enable-edp2-3-lemans-evk-mezzanine-v1-1-969316806538@oss.qualcomm.com/ [Konrad]
- Link to v4: https://lore.kernel.org/all/20260226111322.250176-1-quic_mkuntuma@quicinc.com/

Change in v4:
- Moved the OPP tables for DP and MDP one level up to make them common for both nodes. [Dmitry]
- Added an explanation for enabling dispcc1 in the commit message. [Dmitry]
- Removed unnecessary blank lines preceding 'reg'. [Konrad]
- Link to v3: https://lore.kernel.org/all/20260217071420.2240380-1-mkuntuma@qti.qualcomm.com/

Change in v3:
- Patchset v2 [1/3] got merged
  https://gitlab.freedesktop.org/lumag/msm/-/commit/1338e8ae4084
- Rebased on top of linux-next and picked the latest patch from the dependent series.
- Removed additional instance of opp table [Dmitry]
- Link to v2: https://lore.kernel.org/all/20251125105622.1755651-1-quic_mkuntuma@quicinc.com/

Change in v2:
- Added fixes tag for the DP driver patch [Dmitry]
- Included below patch in this series after addressing comments [Dmitry and Konrad]
  https://lore.kernel.org/all/20250925-lemans_dual-v1-1-9c371803198d@oss.qualcomm.com/
	- Removed the misleading comment: "same path used twice" [Konrad]
	- Removed unused label in 'display-controller' [Dmitry]
- Removed extra zeroes in dispcc1 node [Konrad]
- Enbaled dispcc1 by default in main dtsi file [Dmitry]
- Added EDP ref clock and updated dependency series.
- Link to v1: https://lore.kernel.org/all/20250926085956.2346179-1-quic_mkuntuma@quicinc.com/

---

Mani Chandana Ballary Kuntumalla (2):
  arm64: dts: qcom: lemans: add mdss1 display device nodes
  arm64: dts: qcom: lemans-ride: Enable mdss1 display Port

Vishnu Saini (1):
  arm64: dts: qcom: lemans-evk-ifp-mezzanine: Enable mdss1 display Port

 .../dts/qcom/lemans-evk-ifp-mezzanine.dtso    |  74 +++++
 .../boot/dts/qcom/lemans-ride-common.dtsi     |  80 +++++
 arch/arm64/boot/dts/qcom/lemans.dtsi          | 289 ++++++++++++++++--
 3 files changed, 416 insertions(+), 27 deletions(-)

-- 
2.34.1

[PATCH v5 1/3] arm64: dts: qcom: lemans: add mdss1 display device nodes

[Mani Chandana Ballary Kuntumalla]

Add devicetree changes to enable second Mobile Display Subsystem (mdss1),
Display Processing Unit(DPU), Display Port(DP), Display clock controller
(dispcc1) and eDP PHYs on the Qualcomm Lemans platform.

Signed-off-by: Mahadevan P <mahadevan.p@oss.qualcomm.com>
Signed-off-by: Mani Chandana Ballary Kuntumalla <quic_mkuntuma@quicinc.com>
---
 arch/arm64/boot/dts/qcom/lemans.dtsi | 289 ++++++++++++++++++++++++---
 1 file changed, 262 insertions(+), 27 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index bc0ec9a80284..4e608bd6486c 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -5474,7 +5474,7 @@ mdss0_dp1: displayport-controller@af5c000 {
 				phys = <&mdss0_dp1_phy>;
 				phy-names = "dp";
 
-				operating-points-v2 = <&dp1_opp_table>;
+				operating-points-v2 = <&dp_opp_table>;
 				power-domains = <&rpmhpd SA8775P_MMCX>;
 
 				#sound-dai-cells = <0>;
@@ -5499,30 +5499,6 @@ port@1 {
 						mdss0_dp1_out: endpoint { };
 					};
 				};
-
-				dp1_opp_table: opp-table {
-					compatible = "operating-points-v2";
-
-					opp-162000000 {
-						opp-hz = /bits/ 64 <162000000>;
-						required-opps = <&rpmhpd_opp_low_svs>;
-					};
-
-					opp-270000000 {
-						opp-hz = /bits/ 64 <270000000>;
-						required-opps = <&rpmhpd_opp_svs>;
-					};
-
-					opp-540000000 {
-						opp-hz = /bits/ 64 <540000000>;
-						required-opps = <&rpmhpd_opp_svs_l1>;
-					};
-
-					opp-810000000 {
-						opp-hz = /bits/ 64 <810000000>;
-						required-opps = <&rpmhpd_opp_nom>;
-					};
-				};
 			};
 		};
 
@@ -7055,6 +7031,265 @@ compute-cb@3 {
 			};
 		};
 
+		mdss1: display-subsystem@22000000 {
+			compatible = "qcom,sa8775p-mdss";
+			reg = <0x0 0x22000000 0x0 0x1000>;
+			reg-names = "mdss";
+
+			interconnects = <&mmss_noc MASTER_MDP_CORE1_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&mmss_noc MASTER_MDP_CORE1_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem",
+					     "cpu-cfg";
+
+			resets = <&dispcc1 MDSS_DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc1 MDSS_DISP_CC_MDSS_CORE_GDSC>;
+
+			clocks = <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP1_HF_AXI_CLK>,
+				 <&dispcc1 MDSS_DISP_CC_MDSS_MDP_CLK>;
+
+			interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x1800 0x402>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			display-controller@22001000 {
+				compatible = "qcom,sa8775p-dpu";
+				reg = <0x0 0x22001000 0x0 0x8f000>,
+				      <0x0 0x220b0000 0x0 0x3000>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP1_HF_AXI_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc1 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdss0_mdp_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				interrupt-parent = <&mdss1>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu1_intf0_out: endpoint {
+							remote-endpoint = <&mdss1_dp0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu1_intf4_out: endpoint {
+							remote-endpoint = <&mdss1_dp1_in>;
+						};
+					};
+				};
+			};
+
+			mdss1_dp0_phy: phy@220c2a00 {
+				compatible = "qcom,sa8775p-edp-phy";
+				reg = <0x0 0x220c2a00 0x0 0x200>,
+				      <0x0 0x220c2200 0x0 0xd0>,
+				      <0x0 0x220c2600 0x0 0xd0>,
+				      <0x0 0x220c2000 0x0 0x1c8>;
+
+				clocks = <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_EDP_REF_CLKREF_EN>;
+				clock-names = "aux",
+					      "cfg_ahb",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss1_dp1_phy: phy@220c5a00 {
+				compatible = "qcom,sa8775p-edp-phy";
+				reg = <0x0 0x220c5a00 0x0 0x200>,
+				      <0x0 0x220c5200 0x0 0xd0>,
+				      <0x0 0x220c5600 0x0 0xd0>,
+				      <0x0 0x220c5000 0x0 0x1c8>;
+
+				clocks = <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_EDP_REF_CLKREF_EN>;
+				clock-names = "aux",
+					      "cfg_ahb",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss1_dp0: displayport-controller@22154000 {
+				compatible = "qcom,sa8775p-dp";
+				reg = <0x0 0x22154000 0x0 0x104>,
+				      <0x0 0x22154200 0x0 0x0c0>,
+				      <0x0 0x22155000 0x0 0x770>,
+				      <0x0 0x22156000 0x0 0x09c>,
+				      <0x0 0x22157000 0x0 0x09c>,
+				      <0x0 0x22158000 0x0 0x09c>,
+				      <0x0 0x22159000 0x0 0x09c>,
+				      <0x0 0x2215a000 0x0 0x23c>,
+				      <0x0 0x2215b000 0x0 0x23c>;
+
+				interrupt-parent = <&mdss1>;
+				interrupts = <12>;
+
+				clocks = <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel",
+					      "stream_1_pixel",
+					      "stream_2_pixel",
+					      "stream_3_pixel";
+				assigned-clocks = <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>,
+						  <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>,
+						  <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp0_phy 0>,
+							 <&mdss1_dp0_phy 1>,
+							 <&mdss1_dp0_phy 1>,
+							 <&mdss1_dp0_phy 1>,
+							 <&mdss1_dp0_phy 1>;
+				phys = <&mdss1_dp0_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss1_dp0_in: endpoint {
+							remote-endpoint = <&dpu1_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss1_dp0_out: endpoint { };
+					};
+				};
+			};
+
+			mdss1_dp1: displayport-controller@2215c000 {
+				compatible = "qcom,sa8775p-dp";
+				reg = <0x0 0x2215c000 0x0 0x104>,
+				      <0x0 0x2215c200 0x0 0x0c0>,
+				      <0x0 0x2215d000 0x0 0x770>,
+				      <0x0 0x2215e000 0x0 0x09c>,
+				      <0x0 0x2215f000 0x0 0x09c>,
+				      <0x0 0x22160000 0x0 0x09c>,
+				      <0x0 0x22161000 0x0 0x09c>,
+				      <0x0 0x22162000 0x0 0x23c>,
+				      <0x0 0x22163000 0x0 0x23c>;
+
+				interrupt-parent = <&mdss1>;
+				interrupts = <13>;
+
+				clocks = <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel",
+					      "stream_1_pixel";
+				assigned-clocks = <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+						  <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+						  <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp1_phy 0>,
+							 <&mdss1_dp1_phy 1>,
+							 <&mdss1_dp1_phy 1>;
+				phys = <&mdss1_dp1_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss1_dp1_in: endpoint {
+							remote-endpoint = <&dpu1_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss1_dp1_out: endpoint { };
+					};
+				};
+
+			};
+		};
+
 		dispcc1: clock-controller@22100000 {
 			compatible = "qcom,sa8775p-dispcc1";
 			reg = <0x0 0x22100000 0x0 0x20000>;
@@ -7062,13 +7297,13 @@ dispcc1: clock-controller@22100000 {
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>,
 				 <&sleep_clk>,
-				 <0>, <0>, <0>, <0>,
+				 <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>,
+				 <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>,
 				 <0>, <0>, <0>, <0>;
 			power-domains = <&rpmhpd SA8775P_MMCX>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-			status = "disabled";
 		};
 
 		ethernet1: ethernet@23000000 {
-- 
2.34.1

[PATCH v5 2/3] arm64: dts: qcom: lemans-ride: Enable mdss1 display Port

[Mani Chandana Ballary Kuntumalla]

This change enables DP controllers, DPTX0 and DPTX1 alongside
their corresponding PHYs of mdss1 which corresponds to edp2
and edp3.

Signed-off-by: Mani Chandana Ballary Kuntumalla <quic_mkuntuma@quicinc.com>
---
 .../boot/dts/qcom/lemans-ride-common.dtsi     | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
index 31bd00546d55..9b48e6134ff9 100644
--- a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
@@ -154,6 +154,30 @@ dp1_connector_in: endpoint {
 		};
 	};
 
+	dp2-connector {
+		compatible = "dp-connector";
+		label = "eDP2";
+		type = "full-size";
+
+		port {
+			dp2_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp0_out>;
+			};
+		};
+	};
+
+	dp3-connector {
+		compatible = "dp-connector";
+		label = "eDP3";
+		type = "full-size";
+
+		port {
+			dp3_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp1_out>;
+			};
+		};
+	};
+
 	dp-dsi0-connector {
 		compatible = "dp-connector";
 		label = "DSI0";
@@ -613,6 +637,50 @@ &mdss0_dsi1_phy {
 	status = "okay";
 };
 
+&mdss1 {
+	status = "okay";
+};
+
+&mdss1_dp0 {
+	pinctrl-0 = <&dp2_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss1_dp0_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+	remote-endpoint = <&dp2_connector_in>;
+};
+
+&mdss1_dp0_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&mdss1_dp1 {
+	pinctrl-0 = <&dp3_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss1_dp1_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+	remote-endpoint = <&dp3_connector_in>;
+};
+
+&mdss1_dp1_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
 &pmm8654au_0_gpios {
 	gpio-line-names = "DS_EN",
 			  "POFF_COMPLETE",
@@ -790,6 +858,18 @@ dp1_hot_plug_det: dp1-hot-plug-det-state {
 		bias-disable;
 	};
 
+	dp2_hot_plug_det: dp2-hot-plug-det-state {
+		pins = "gpio104";
+		function = "edp2_hot";
+		bias-disable;
+	};
+
+	dp3_hot_plug_det: dp3-hot-plug-det-state {
+		pins = "gpio103";
+		function = "edp3_hot";
+		bias-disable;
+	};
+
 	io_expander_intr_active: io-expander-intr-active-state {
 		pins = "gpio98";
 		function = "gpio";
-- 
2.34.1

[PATCH v5 3/3] arm64: dts: qcom: lemans-evk-ifp-mezzanine: Enable mdss1 display Port

[Mani Chandana Ballary Kuntumalla]

From: Vishnu Saini <vishnu.saini@oss.qualcomm.com>

Enable DP controllers, DPTX0 and DPTX1 alongside
their corresponding PHYs of mdss1 which corresponds to eDP2
and eDP3.

Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
Signed-off-by: Mani Chandana Ballary Kuntumalla <quic_mkuntuma@quicinc.com>
---
 .../dts/qcom/lemans-evk-ifp-mezzanine.dtso    | 74 +++++++++++++++++++
 1 file changed, 74 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso b/arch/arm64/boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso
index 268fc6b05d4b..44bd9b1a1765 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso
+++ b/arch/arm64/boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso
@@ -11,6 +11,30 @@
 &{/} {
 	model = "Qualcomm Technologies, Inc. Lemans-evk IFP Mezzanine";
 
+	dp2-connector {
+		compatible = "dp-connector";
+		label = "eDP2";
+		type = "full-size";
+
+		port {
+			dp2_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp0_out>;
+			};
+		};
+	};
+
+	dp3-connector {
+		compatible = "dp-connector";
+		label = "eDP3";
+		type = "full-size";
+
+		port {
+			dp3_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp1_out>;
+			};
+		};
+	};
+
 	vreg_0p9: regulator-0v9 {
 		compatible = "regulator-fixed";
 		regulator-name = "VREG_0P9";
@@ -141,6 +165,44 @@ mac_addr1: mac-addr@0 {
 	};
 };
 
+&mdss1 {
+	status = "okay";
+};
+
+&mdss1_dp0 {
+	pinctrl-0 = <&dp2_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss1_dp1 {
+	pinctrl-0 = <&dp3_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss1_dp0_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+	remote-endpoint = <&dp2_connector_in>;
+};
+
+&mdss1_dp1_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+	remote-endpoint = <&dp3_connector_in>;
+};
+
+&mdss1_dp0_phy {
+	status = "okay";
+};
+
+&mdss1_dp1_phy {
+	status = "okay";
+};
+
 &pcie0 {
 	iommu-map = <0x0 &pcie_smmu 0x0 0x1>,
 		    <0x100 &pcie_smmu 0x1 0x1>,
@@ -235,6 +297,18 @@ &serdes1 {
 };
 
 &tlmm {
+	dp2_hot_plug_det: dp2-hot-plug-det-state {
+		pins = "gpio104";
+		function = "edp2_hot";
+		bias-disable;
+	};
+
+	dp3_hot_plug_det: dp3-hot-plug-det-state {
+		pins = "gpio103";
+		function = "edp3_hot";
+		bias-disable;
+	};
+
 	ethernet1_default: ethernet1-default-state {
 		ethernet1-mdc-pins {
 			pins = "gpio20";
-- 
2.34.1

Re: [PATCH v5 2/3] arm64: dts: qcom: lemans-ride: Enable mdss1 display Port

[Konrad Dybcio]

On 4/2/26 11:50 AM, Mani Chandana Ballary Kuntumalla wrote:
> This change enables DP controllers, DPTX0 and DPTX1 alongside
> their corresponding PHYs of mdss1 which corresponds to edp2
> and edp3.
> 
> Signed-off-by: Mani Chandana Ballary Kuntumalla <quic_mkuntuma@quicinc.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v5 3/3] arm64: dts: qcom: lemans-evk-ifp-mezzanine: Enable mdss1 display Port

[Konrad Dybcio]

On 4/2/26 11:50 AM, Mani Chandana Ballary Kuntumalla wrote:
> From: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
> 
> Enable DP controllers, DPTX0 and DPTX1 alongside
> their corresponding PHYs of mdss1 which corresponds to eDP2
> and eDP3.
> 
> Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
> Signed-off-by: Mani Chandana Ballary Kuntumalla <quic_mkuntuma@quicinc.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v5 0/3] Enable mdss1 Display Port for Qualcomm lemans-ride platform

[Bjorn Andersson]

On Thu, 02 Apr 2026 15:20:00 +0530, Mani Chandana Ballary Kuntumalla wrote:
> This series adds the DPTX0 and DPTX1 nodes, as a part of mdss1
> on Qualcomm lemans SoC. It also enables Display Port on Qualcomm
> lemans-ride and lemans-evk-ifp-mezzanine platforms.
> 

Applied, thanks!

[1/3] arm64: dts: qcom: lemans: add mdss1 display device nodes
      commit: 3e6cd0c43cdf678622c19210bd1a70b04c8a79af
[2/3] arm64: dts: qcom: lemans-ride: Enable mdss1 display Port
      commit: fcc1a19f5bd5623c448e54b2ea6d50249abea77a
[3/3] arm64: dts: qcom: lemans-evk-ifp-mezzanine: Enable mdss1 display Port
      commit: f0b64466e2896020ff2bcaa512bbcc4fea847635

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>