* [PATCH] soc: ti: k3-socinfo: Revamp driver to accommodate different rev structs
@ 2023-09-14 7:44 Neha Malcom Francis
2023-09-14 16:02 ` Nishanth Menon
0 siblings, 1 reply; 3+ messages in thread
From: Neha Malcom Francis @ 2023-09-14 7:44 UTC (permalink / raw)
To: nm, ssantosh; +Cc: linux-kernel, linux-arm-kernel, n-francis, u-kumar1
k3-socinfo.c driver assumes silicon revisions to be 1.0, 2.0 etc. for
every platform. However this typical style is not followed by J721E
(1.0, 1.1) and need not be followed by upcoming silicon revisions as
well. Adapt the driver to be similar to its U-Boot counterpart
(drivers/soc/soc_ti_k3.c) that accounts for this difference on the basis
of partno/family. While at it, modify driver to be more understandable.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
---
This patch tries to revive an earlier attempt [1] and also works off of
those review comments, sending it as a new patch since the approach is
slightly different.
[1] https://lore.kernel.org/all/20230607080349.26671-1-t-konduru@ti.com/
drivers/soc/ti/k3-socinfo.c | 112 +++++++++++++++++++++++++-----------
1 file changed, 80 insertions(+), 32 deletions(-)
diff --git a/drivers/soc/ti/k3-socinfo.c b/drivers/soc/ti/k3-socinfo.c
index 6ea9b8c7d335..1e7a32b5b63f 100644
--- a/drivers/soc/ti/k3-socinfo.c
+++ b/drivers/soc/ti/k3-socinfo.c
@@ -20,7 +20,7 @@
* 31-28 VARIANT Device variant
* 27-12 PARTNO Part number
* 11-1 MFG Indicates TI as manufacturer (0x17)
- * 1 Always 1
+ * 0 Always 1
*/
#define CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT (28)
#define CTRLMMR_WKUP_JTAGID_VARIANT_MASK GENMASK(31, 28)
@@ -33,33 +33,81 @@
#define CTRLMMR_WKUP_JTAGID_MFG_TI 0x17
-static const struct k3_soc_id {
- unsigned int id;
- const char *family_name;
-} k3_soc_ids[] = {
- { 0xBB5A, "AM65X" },
- { 0xBB64, "J721E" },
- { 0xBB6D, "J7200" },
- { 0xBB38, "AM64X" },
- { 0xBB75, "J721S2"},
- { 0xBB7E, "AM62X" },
- { 0xBB80, "J784S4" },
- { 0xBB8D, "AM62AX" },
- { 0xBB9D, "AM62PX" },
+#define JTAG_ID_PARTNO_AM65X 0xBB5A
+#define JTAG_ID_PARTNO_J721E 0xBB64
+#define JTAG_ID_PARTNO_J7200 0xBB6D
+#define JTAG_ID_PARTNO_AM64X 0xBB38
+#define JTAG_ID_PARTNO_J721S2 0xBB75
+#define JTAG_ID_PARTNO_AM62X 0xBB7E
+#define JTAG_ID_PARTNO_J784S4 0xBB80
+#define JTAG_ID_PARTNO_AM62AX 0xBB8D
+#define JTAG_ID_PARTNO_AM62PX 0xBB9D
+
+static char *j721e_rev_string_map[] = {
+ "1.0", "1.1",
+};
+
+static char *typical_rev_string_map[] = {
+ "1.0", "2.0", "3.0",
};
static int
k3_chipinfo_partno_to_names(unsigned int partno,
struct soc_device_attribute *soc_dev_attr)
{
- int i;
+ switch (partno) {
+ case JTAG_ID_PARTNO_AM62AX:
+ soc_dev_attr->family = "AM62AX";
+ break;
+ case JTAG_ID_PARTNO_AM62PX:
+ soc_dev_attr->family = "AM62PX";
+ break;
+ case JTAG_ID_PARTNO_AM62X:
+ soc_dev_attr->family = "AM62X";
+ break;
+ case JTAG_ID_PARTNO_AM64X:
+ soc_dev_attr->family = "AM64X";
+ break;
+ case JTAG_ID_PARTNO_AM65X:
+ soc_dev_attr->family = "AM65X";
+ break;
+ case JTAG_ID_PARTNO_J7200:
+ soc_dev_attr->family = "J7200";
+ break;
+ case JTAG_ID_PARTNO_J721E:
+ soc_dev_attr->family = "J721E";
+ break;
+ case JTAG_ID_PARTNO_J721S2:
+ soc_dev_attr->family = "J721S2";
+ break;
+ case JTAG_ID_PARTNO_J784S4:
+ soc_dev_attr->family = "J784S4";
+ break;
+ default:
+ return -EINVAL;
+ };
+ return 0;
+};
- for (i = 0; i < ARRAY_SIZE(k3_soc_ids); i++)
- if (partno == k3_soc_ids[i].id) {
- soc_dev_attr->family = k3_soc_ids[i].family_name;
- return 0;
- }
+static int k3_chipinfo_variant_to_sr(unsigned int partno, unsigned int variant,
+ struct soc_device_attribute *soc_dev_attr)
+{
+ switch (partno) {
+ case JTAG_ID_PARTNO_J721E:
+ if (variant >= ARRAY_SIZE(j721e_rev_string_map))
+ goto bail;
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "SR%s",
+ j721e_rev_string_map[variant]);
+ break;
+ default:
+ if (variant >= ARRAY_SIZE(typical_rev_string_map))
+ goto bail;
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "SR%s",
+ typical_rev_string_map[variant]);
+ }
+ return 0;
+bail:
return -EINVAL;
}
@@ -70,10 +118,10 @@ static int k3_chipinfo_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct soc_device *soc_dev;
struct regmap *regmap;
- u32 partno_id;
- u32 variant;
u32 jtag_id;
u32 mfg;
+ u32 partno_id;
+ u32 variant;
int ret;
regmap = device_node_to_regmap(node);
@@ -92,28 +140,28 @@ static int k3_chipinfo_probe(struct platform_device *pdev)
return -ENODEV;
}
- variant = (jtag_id & CTRLMMR_WKUP_JTAGID_VARIANT_MASK) >>
- CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT;
- variant++;
-
partno_id = (jtag_id & CTRLMMR_WKUP_JTAGID_PARTNO_MASK) >>
CTRLMMR_WKUP_JTAGID_PARTNO_SHIFT;
+ variant = (jtag_id & CTRLMMR_WKUP_JTAGID_VARIANT_MASK) >>
+ CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT;
+
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
return -ENOMEM;
- soc_dev_attr->revision = kasprintf(GFP_KERNEL, "SR%x.0", variant);
- if (!soc_dev_attr->revision) {
- ret = -ENOMEM;
+ ret = k3_chipinfo_partno_to_names(partno_id, soc_dev_attr);
+ if (ret) {
+ dev_err(dev, "Unknown SoC JTAGID[0x%08X]\n", jtag_id);
+ ret = -ENODEV;
goto err;
}
- ret = k3_chipinfo_partno_to_names(partno_id, soc_dev_attr);
+ ret = k3_chipinfo_variant_to_sr(partno_id, variant, soc_dev_attr);
if (ret) {
- dev_err(dev, "Unknown SoC JTAGID[0x%08X]\n", jtag_id);
+ dev_err(dev, "Unknown revision for %s\n", soc_dev_attr->family);
ret = -ENODEV;
- goto err_free_rev;
+ goto err;
}
node = of_find_node_by_path("/");
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] soc: ti: k3-socinfo: Revamp driver to accommodate different rev structs
2023-09-14 7:44 [PATCH] soc: ti: k3-socinfo: Revamp driver to accommodate different rev structs Neha Malcom Francis
@ 2023-09-14 16:02 ` Nishanth Menon
2023-09-15 2:45 ` Neha Malcom Francis
0 siblings, 1 reply; 3+ messages in thread
From: Nishanth Menon @ 2023-09-14 16:02 UTC (permalink / raw)
To: Neha Malcom Francis; +Cc: ssantosh, linux-kernel, linux-arm-kernel, u-kumar1
On 13:14-20230914, Neha Malcom Francis wrote:
> k3-socinfo.c driver assumes silicon revisions to be 1.0, 2.0 etc. for
> every platform. However this typical style is not followed by J721E
> (1.0, 1.1) and need not be followed by upcoming silicon revisions as
> well. Adapt the driver to be similar to its U-Boot counterpart
> (drivers/soc/soc_ti_k3.c) that accounts for this difference on the basis
> of partno/family. While at it, modify driver to be more understandable.
Don't mix so many things up in a single patch.
>
> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
> ---
> This patch tries to revive an earlier attempt [1] and also works off of
> those review comments, sending it as a new patch since the approach is
> slightly different.
>
> [1] https://lore.kernel.org/all/20230607080349.26671-1-t-konduru@ti.com/
>
> drivers/soc/ti/k3-socinfo.c | 112 +++++++++++++++++++++++++-----------
> 1 file changed, 80 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/soc/ti/k3-socinfo.c b/drivers/soc/ti/k3-socinfo.c
> index 6ea9b8c7d335..1e7a32b5b63f 100644
> --- a/drivers/soc/ti/k3-socinfo.c
> +++ b/drivers/soc/ti/k3-socinfo.c
> @@ -20,7 +20,7 @@
> * 31-28 VARIANT Device variant
> * 27-12 PARTNO Part number
> * 11-1 MFG Indicates TI as manufacturer (0x17)
> - * 1 Always 1
> + * 0 Always 1
Looks like a typo you are fixing, but no information in commit message.
> */
> #define CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT (28)
> #define CTRLMMR_WKUP_JTAGID_VARIANT_MASK GENMASK(31, 28)
> @@ -33,33 +33,81 @@
>
> #define CTRLMMR_WKUP_JTAGID_MFG_TI 0x17
>
> -static const struct k3_soc_id {
> - unsigned int id;
> - const char *family_name;
> -} k3_soc_ids[] = {
> - { 0xBB5A, "AM65X" },
> - { 0xBB64, "J721E" },
> - { 0xBB6D, "J7200" },
> - { 0xBB38, "AM64X" },
> - { 0xBB75, "J721S2"},
> - { 0xBB7E, "AM62X" },
> - { 0xBB80, "J784S4" },
> - { 0xBB8D, "AM62AX" },
> - { 0xBB9D, "AM62PX" },
> +#define JTAG_ID_PARTNO_AM65X 0xBB5A
> +#define JTAG_ID_PARTNO_J721E 0xBB64
> +#define JTAG_ID_PARTNO_J7200 0xBB6D
> +#define JTAG_ID_PARTNO_AM64X 0xBB38
> +#define JTAG_ID_PARTNO_J721S2 0xBB75
> +#define JTAG_ID_PARTNO_AM62X 0xBB7E
> +#define JTAG_ID_PARTNO_J784S4 0xBB80
> +#define JTAG_ID_PARTNO_AM62AX 0xBB8D
> +#define JTAG_ID_PARTNO_AM62PX 0xBB9D
> +
> +static char *j721e_rev_string_map[] = {
> + "1.0", "1.1",
> +};
> +
> +static char *typical_rev_string_map[] = {
use k3_ name space please for vars.
> + "1.0", "2.0", "3.0",
> };
>
> static int
> k3_chipinfo_partno_to_names(unsigned int partno,
> struct soc_device_attribute *soc_dev_attr)
> {
> - int i;
> + switch (partno) {
> + case JTAG_ID_PARTNO_AM62AX:
> + soc_dev_attr->family = "AM62AX";
> + break;
> + case JTAG_ID_PARTNO_AM62PX:
> + soc_dev_attr->family = "AM62PX";
> + break;
> + case JTAG_ID_PARTNO_AM62X:
> + soc_dev_attr->family = "AM62X";
> + break;
> + case JTAG_ID_PARTNO_AM64X:
> + soc_dev_attr->family = "AM64X";
> + break;
> + case JTAG_ID_PARTNO_AM65X:
> + soc_dev_attr->family = "AM65X";
> + break;
> + case JTAG_ID_PARTNO_J7200:
> + soc_dev_attr->family = "J7200";
> + break;
> + case JTAG_ID_PARTNO_J721E:
> + soc_dev_attr->family = "J721E";
> + break;
> + case JTAG_ID_PARTNO_J721S2:
> + soc_dev_attr->family = "J721S2";
> + break;
> + case JTAG_ID_PARTNO_J784S4:
> + soc_dev_attr->family = "J784S4";
> + break;
> + default:
> + return -EINVAL;
> + };
> + return 0;
> +};
>
> - for (i = 0; i < ARRAY_SIZE(k3_soc_ids); i++)
> - if (partno == k3_soc_ids[i].id) {
> - soc_dev_attr->family = k3_soc_ids[i].family_name;
> - return 0;
> - }
Why redo the family attribute? That is JTAG standard and handling is
valid and implementation is optimal - no sense in churning here.
> +static int k3_chipinfo_variant_to_sr(unsigned int partno, unsigned int variant,
> + struct soc_device_attribute *soc_dev_attr)
> +{
> + switch (partno) {
> + case JTAG_ID_PARTNO_J721E:
> + if (variant >= ARRAY_SIZE(j721e_rev_string_map))
> + goto bail;
> + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "SR%s",
> + j721e_rev_string_map[variant]);
> + break;
> + default:
> + if (variant >= ARRAY_SIZE(typical_rev_string_map))
> + goto bail;
> + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "SR%s",
> + typical_rev_string_map[variant]);
> + }
> + return 0;
>
> +bail:
> return -EINVAL;
> }
>
> @@ -70,10 +118,10 @@ static int k3_chipinfo_probe(struct platform_device *pdev)
> struct device *dev = &pdev->dev;
> struct soc_device *soc_dev;
> struct regmap *regmap;
> - u32 partno_id;
> - u32 variant;
> u32 jtag_id;
> u32 mfg;
> + u32 partno_id;
> + u32 variant;
> int ret;
>
> regmap = device_node_to_regmap(node);
> @@ -92,28 +140,28 @@ static int k3_chipinfo_probe(struct platform_device *pdev)
> return -ENODEV;
> }
>
> - variant = (jtag_id & CTRLMMR_WKUP_JTAGID_VARIANT_MASK) >>
> - CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT;
> - variant++;
> -
> partno_id = (jtag_id & CTRLMMR_WKUP_JTAGID_PARTNO_MASK) >>
> CTRLMMR_WKUP_JTAGID_PARTNO_SHIFT;
>
> + variant = (jtag_id & CTRLMMR_WKUP_JTAGID_VARIANT_MASK) >>
> + CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT;
> +
no need to relocate the code - just call the chip_info_to_sr
> soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
> if (!soc_dev_attr)
> return -ENOMEM;
>
> - soc_dev_attr->revision = kasprintf(GFP_KERNEL, "SR%x.0", variant);
> - if (!soc_dev_attr->revision) {
> - ret = -ENOMEM;
> + ret = k3_chipinfo_partno_to_names(partno_id, soc_dev_attr);
> + if (ret) {
> + dev_err(dev, "Unknown SoC JTAGID[0x%08X]\n", jtag_id);
> + ret = -ENODEV;
> goto err;
> }
>
> - ret = k3_chipinfo_partno_to_names(partno_id, soc_dev_attr);
> + ret = k3_chipinfo_variant_to_sr(partno_id, variant, soc_dev_attr);
> if (ret) {
> - dev_err(dev, "Unknown SoC JTAGID[0x%08X]\n", jtag_id);
> + dev_err(dev, "Unknown revision for %s\n", soc_dev_attr->family);
> ret = -ENODEV;
> - goto err_free_rev;
> + goto err;
> }
>
> node = of_find_node_by_path("/");
> --
> 2.34.1
>
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] soc: ti: k3-socinfo: Revamp driver to accommodate different rev structs
2023-09-14 16:02 ` Nishanth Menon
@ 2023-09-15 2:45 ` Neha Malcom Francis
0 siblings, 0 replies; 3+ messages in thread
From: Neha Malcom Francis @ 2023-09-15 2:45 UTC (permalink / raw)
To: Nishanth Menon; +Cc: ssantosh, linux-kernel, linux-arm-kernel, u-kumar1
Hi Nishanth
On 14/09/23 21:32, Nishanth Menon wrote:
> On 13:14-20230914, Neha Malcom Francis wrote:
>> k3-socinfo.c driver assumes silicon revisions to be 1.0, 2.0 etc. for
>> every platform. However this typical style is not followed by J721E
>> (1.0, 1.1) and need not be followed by upcoming silicon revisions as
>> well. Adapt the driver to be similar to its U-Boot counterpart
>> (drivers/soc/soc_ti_k3.c) that accounts for this difference on the basis
>> of partno/family. While at it, modify driver to be more understandable.
>
> Don't mix so many things up in a single patch.
>
>>
>> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
>> ---
>> This patch tries to revive an earlier attempt [1] and also works off of
>> those review comments, sending it as a new patch since the approach is
>> slightly different.
>>
>> [1] https://lore.kernel.org/all/20230607080349.26671-1-t-konduru@ti.com/
>>
>> drivers/soc/ti/k3-socinfo.c | 112 +++++++++++++++++++++++++-----------
>> 1 file changed, 80 insertions(+), 32 deletions(-)
>>
>> diff --git a/drivers/soc/ti/k3-socinfo.c b/drivers/soc/ti/k3-socinfo.c
>> index 6ea9b8c7d335..1e7a32b5b63f 100644
>> --- a/drivers/soc/ti/k3-socinfo.c
>> +++ b/drivers/soc/ti/k3-socinfo.c
>> @@ -20,7 +20,7 @@
>> * 31-28 VARIANT Device variant
>> * 27-12 PARTNO Part number
>> * 11-1 MFG Indicates TI as manufacturer (0x17)
>> - * 1 Always 1
>> + * 0 Always 1
>
> Looks like a typo you are fixing, but no information in commit message.
>
>> */
>> #define CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT (28)
>> #define CTRLMMR_WKUP_JTAGID_VARIANT_MASK GENMASK(31, 28)
>> @@ -33,33 +33,81 @@
>>
>> #define CTRLMMR_WKUP_JTAGID_MFG_TI 0x17
>>
>> -static const struct k3_soc_id {
>> - unsigned int id;
>> - const char *family_name;
>> -} k3_soc_ids[] = {
>> - { 0xBB5A, "AM65X" },
>> - { 0xBB64, "J721E" },
>> - { 0xBB6D, "J7200" },
>> - { 0xBB38, "AM64X" },
>> - { 0xBB75, "J721S2"},
>> - { 0xBB7E, "AM62X" },
>> - { 0xBB80, "J784S4" },
>> - { 0xBB8D, "AM62AX" },
>> - { 0xBB9D, "AM62PX" },
>> +#define JTAG_ID_PARTNO_AM65X 0xBB5A
>> +#define JTAG_ID_PARTNO_J721E 0xBB64
>> +#define JTAG_ID_PARTNO_J7200 0xBB6D
>> +#define JTAG_ID_PARTNO_AM64X 0xBB38
>> +#define JTAG_ID_PARTNO_J721S2 0xBB75
>> +#define JTAG_ID_PARTNO_AM62X 0xBB7E
>> +#define JTAG_ID_PARTNO_J784S4 0xBB80
>> +#define JTAG_ID_PARTNO_AM62AX 0xBB8D
>> +#define JTAG_ID_PARTNO_AM62PX 0xBB9D
>> +
>> +static char *j721e_rev_string_map[] = {
>> + "1.0", "1.1",
>> +};
>> +
>> +static char *typical_rev_string_map[] = {
>
> use k3_ name space please for vars.
>
>> + "1.0", "2.0", "3.0",
>> };
>>
>> static int
>> k3_chipinfo_partno_to_names(unsigned int partno,
>> struct soc_device_attribute *soc_dev_attr)
>> {
>> - int i;
>> + switch (partno) {
>> + case JTAG_ID_PARTNO_AM62AX:
>> + soc_dev_attr->family = "AM62AX";
>> + break;
>> + case JTAG_ID_PARTNO_AM62PX:
>> + soc_dev_attr->family = "AM62PX";
>> + break;
>> + case JTAG_ID_PARTNO_AM62X:
>> + soc_dev_attr->family = "AM62X";
>> + break;
>> + case JTAG_ID_PARTNO_AM64X:
>> + soc_dev_attr->family = "AM64X";
>> + break;
>> + case JTAG_ID_PARTNO_AM65X:
>> + soc_dev_attr->family = "AM65X";
>> + break;
>> + case JTAG_ID_PARTNO_J7200:
>> + soc_dev_attr->family = "J7200";
>> + break;
>> + case JTAG_ID_PARTNO_J721E:
>> + soc_dev_attr->family = "J721E";
>> + break;
>> + case JTAG_ID_PARTNO_J721S2:
>> + soc_dev_attr->family = "J721S2";
>> + break;
>> + case JTAG_ID_PARTNO_J784S4:
>> + soc_dev_attr->family = "J784S4";
>> + break;
>> + default:
>> + return -EINVAL;
>> + };
>> + return 0;
>> +};
>>
>> - for (i = 0; i < ARRAY_SIZE(k3_soc_ids); i++)
>> - if (partno == k3_soc_ids[i].id) {
>> - soc_dev_attr->family = k3_soc_ids[i].family_name;
>> - return 0;
>> - }
>
> Why redo the family attribute? That is JTAG standard and handling is
> valid and implementation is optimal - no sense in churning here.
>
>> +static int k3_chipinfo_variant_to_sr(unsigned int partno, unsigned int variant,
>> + struct soc_device_attribute *soc_dev_attr)
>> +{
>> + switch (partno) {
>> + case JTAG_ID_PARTNO_J721E:
>> + if (variant >= ARRAY_SIZE(j721e_rev_string_map))
>> + goto bail;
>> + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "SR%s",
>> + j721e_rev_string_map[variant]);
>> + break;
>> + default:
>> + if (variant >= ARRAY_SIZE(typical_rev_string_map))
>> + goto bail;
>> + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "SR%s",
>> + typical_rev_string_map[variant]);
>> + }
>> + return 0;
>>
>> +bail:
>> return -EINVAL;
>> }
>>
>> @@ -70,10 +118,10 @@ static int k3_chipinfo_probe(struct platform_device *pdev)
>> struct device *dev = &pdev->dev;
>> struct soc_device *soc_dev;
>> struct regmap *regmap;
>> - u32 partno_id;
>> - u32 variant;
>> u32 jtag_id;
>> u32 mfg;
>> + u32 partno_id;
>> + u32 variant;
>> int ret;
>>
>> regmap = device_node_to_regmap(node);
>> @@ -92,28 +140,28 @@ static int k3_chipinfo_probe(struct platform_device *pdev)
>> return -ENODEV;
>> }
>>
>> - variant = (jtag_id & CTRLMMR_WKUP_JTAGID_VARIANT_MASK) >>
>> - CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT;
>> - variant++;
>> -
>> partno_id = (jtag_id & CTRLMMR_WKUP_JTAGID_PARTNO_MASK) >>
>> CTRLMMR_WKUP_JTAGID_PARTNO_SHIFT;
>>
>> + variant = (jtag_id & CTRLMMR_WKUP_JTAGID_VARIANT_MASK) >>
>> + CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT;
>> +
> no need to relocate the code - just call the chip_info_to_sr
>
>> soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
>> if (!soc_dev_attr)
>> return -ENOMEM;
>>
>> - soc_dev_attr->revision = kasprintf(GFP_KERNEL, "SR%x.0", variant);
>> - if (!soc_dev_attr->revision) {
>> - ret = -ENOMEM;
>> + ret = k3_chipinfo_partno_to_names(partno_id, soc_dev_attr);
>> + if (ret) {
>> + dev_err(dev, "Unknown SoC JTAGID[0x%08X]\n", jtag_id);
>> + ret = -ENODEV;
>> goto err;
>> }
>>
>> - ret = k3_chipinfo_partno_to_names(partno_id, soc_dev_attr);
>> + ret = k3_chipinfo_variant_to_sr(partno_id, variant, soc_dev_attr);
>> if (ret) {
>> - dev_err(dev, "Unknown SoC JTAGID[0x%08X]\n", jtag_id);
>> + dev_err(dev, "Unknown revision for %s\n", soc_dev_attr->family);
>> ret = -ENODEV;
>> - goto err_free_rev;
>> + goto err;
>> }
>>
>> node = of_find_node_by_path("/");
>> --
>> 2.34.1
>>
>
Thanks for the review, will work on it and send v2
--
Thanking You
Neha Malcom Francis
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-09-15 2:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-09-14 7:44 [PATCH] soc: ti: k3-socinfo: Revamp driver to accommodate different rev structs Neha Malcom Francis
2023-09-14 16:02 ` Nishanth Menon
2023-09-15 2:45 ` Neha Malcom Francis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox