Re: [RESEND PATCH] arm64: dts: ti: k3-j784s4-mcu-wakeup: Configure wkup_uart0 with clock settings

[Beleswar Prasad Padhi <b-padhi@ti.com>]

Hi Udit,

On 03/06/25 09:54, Udit Kumar wrote:
> From: Bhavya Kapoor <b-kapoor@ti.com>
>
> This commit adds the assigned-clocks and assigned-clock-parents
> properties for wkup_uart0 in J784S4. Specifically, the assigned-clocks
> property is set to reference the clock identified by
> "wkup_usart_mcupll_bypass_out0",


Documentation says "WKUP_UART0_FCLK_CLK" for device id 397 and clock id 0...?
https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j784s4/clocks.html

>  ensuring the UART operates with the
> correct clock source.
>
> The assigned-clock-parents property specifies "wkup_usart_clksel_out0"
> as the parent clock. This configuration is critical for establishing
> the proper clocking hierarchy, enabling the UART device to function
> reliably across different baud rates.
>
> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>


Do you need to add your Sign off?

Thanks,
Beleswar

> ---
> Link to v1: https://lore.kernel.org/all/20241009072056.3511346-1-b-kapoor@ti.com/
>
>  arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
> index 52e2965a3bf5..1146bc5990ea 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
> @@ -310,6 +310,8 @@ wkup_uart0: serial@42300000 {
>  		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
>  		clocks = <&k3_clks 397 0>;
>  		clock-names = "fclk";
> +		assigned-clocks = <&k3_clks 397 0>;
> +		assigned-clock-parents = <&k3_clks 397 1>;
>  		power-domains = <&k3_pds 397 TI_SCI_PD_EXCLUSIVE>;
>  		status = "disabled";
>  	};