[PATCH v4 0/2] clk: amlogic: Add A9 AO clock controller

[PATCH v4 0/2] clk: amlogic: Add A9 AO clock controller

[Jian Hu via B4 Relay]

This series adds Amlogic A9 AO clock support, including dt-binding and AO clock driver.

Signed-off-by: Jian Hu <jian.hu@amlogic.com>
---
Changes in v4:
- Drop CLK_IS_CRITICAL for ao_xtal_in clock.
- Drop CLK_HW_INIT* and revert to explicit clock declarations.
- Link to v3: https://lore.kernel.org/r/20260610-a9_aoclk-v3-0-b7592d6c31e2@amlogic.com

Changes in v3:
- Move COMPILE_TEST after 'depends on ARM64' reported by sashiko-bot.
- Rename i2c3 to i3c reported by sashiko-bot.
- Reword the comment describing ao_xtal_in's flags.
- Use struct clk_init_data to describe ao_xtal_in's hw.init.
- Link to v2: https://lore.kernel.org/r/20260603-a9_aoclk-v2-0-f47ea616ee78@amlogic.com

Changes in v2:
- Split the A9 clock driver and send the AO clock separately.
- Rename aobus to soc.
- Use CLK_HW_INIT_FW_NAME to describe clk_init_data.
- Use CLK_HW_INIT_PARENTS_DATA to describe clk_init_data.
- Use a9_ao prefix for MESON_COMP_SEL.
- Correct duandiv name.
- Fix pwm b reg.
- Link to v1: https://lore.kernel.org/all/20260511-b4-a9_clk-v1-0-41cb4071b7c9@amlogic.com/

---
Jian Hu (2):
      dt-bindings: clock: Add Amlogic A9 AO clock controller
      clk: amlogic: Add A9 AO clock controller driver

 .../bindings/clock/amlogic,a9-aoclkc.yaml          |  76 ++++
 drivers/clk/meson/Kconfig                          |  13 +
 drivers/clk/meson/Makefile                         |   1 +
 drivers/clk/meson/a9-aoclk.c                       | 488 +++++++++++++++++++++
 include/dt-bindings/clock/amlogic,a9-aoclkc.h      |  76 ++++
 5 files changed, 654 insertions(+)
---
base-commit: ca89c88bcf69daca829044c638a8163d5ce47af0
change-id: 20260603-a9_aoclk-bbf531badc63

Best regards,
-- 
Jian Hu <jian.hu@amlogic.com>

[PATCH v4 1/2] dt-bindings: clock: Add Amlogic A9 AO clock controller

[Jian Hu via B4 Relay]

From: Jian Hu <jian.hu@amlogic.com>

Add the Always-On clock controller dt-bindings for the Amlogic A9
SoC family.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
---
 .../bindings/clock/amlogic,a9-aoclkc.yaml          | 76 ++++++++++++++++++++++
 include/dt-bindings/clock/amlogic,a9-aoclkc.h      | 76 ++++++++++++++++++++++
 2 files changed, 152 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/amlogic,a9-aoclkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a9-aoclkc.yaml
new file mode 100644
index 000000000000..1fa9b3a32fbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,a9-aoclkc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2026 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,a9-aoclkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic A9 Series Always-On Clock Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Jerome Brunet <jbrunet@baylibre.com>
+  - Jian Hu <jian.hu@amlogic.com>
+  - Xianwei Zhao <xianwei.zhao@amlogic.com>
+
+properties:
+  compatible:
+    const: amlogic,a9-aoclkc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    minItems: 5
+    items:
+      - description: input oscillator
+      - description: input fclk div 3
+      - description: input fclk div 4
+      - description: input fclk div 5
+      - description: input sys clk
+      - description: external fixed 32k (optional)
+
+  clock-names:
+    minItems: 5
+    items:
+      - const: xtal
+      - const: fdiv3
+      - const: fdiv4
+      - const: fdiv5
+      - const: sys
+      - const: ext_32k
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@0 {
+            compatible = "amlogic,a9-aoclkc";
+            reg = <0x0 0x0 0x0 0x58>;
+            #clock-cells = <1>;
+            clocks = <&xtal>,
+                     <&scmi_clk 14>,
+                     <&scmi_clk 16>,
+                     <&scmi_clk 18>,
+                     <&scmi_clk 21>;
+            clock-names = "xtal",
+                          "fdiv3",
+                          "fdiv4",
+                          "fdiv5",
+                          "sys";
+        };
+    };
diff --git a/include/dt-bindings/clock/amlogic,a9-aoclkc.h b/include/dt-bindings/clock/amlogic,a9-aoclkc.h
new file mode 100644
index 000000000000..a7d704d4b58e
--- /dev/null
+++ b/include/dt-bindings/clock/amlogic,a9-aoclkc.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2026 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __AMLOGIC_A9_AO_CLKC_H
+#define __AMLOGIC_A9_AO_CLKC_H
+
+#define CLKID_AO_XTAL_IN			0
+#define CLKID_AO_XTAL				1
+#define CLKID_AO_SYS				2
+#define CLKID_AO_SYS_I3C			3
+#define CLKID_AO_SYS_RTC_REG			4
+#define CLKID_AO_SYS_CLKTREE			5
+#define CLKID_AO_SYS_RST_CTRL			6
+#define CLKID_AO_SYS_PAD			7
+#define CLKID_AO_SYS_RTC_DIG			8
+#define CLKID_AO_SYS_IRQ			9
+#define CLKID_AO_SYS_PWRCTRL			10
+#define CLKID_AO_SYS_PWM_A			11
+#define CLKID_AO_SYS_PWM_B			12
+#define CLKID_AO_SYS_PWM_C			13
+#define CLKID_AO_SYS_PWM_D			14
+#define CLKID_AO_SYS_PWM_E			15
+#define CLKID_AO_SYS_PWM_F			16
+#define CLKID_AO_SYS_PWM_G			17
+#define CLKID_AO_SYS_I2C_A			18
+#define CLKID_AO_SYS_I2C_B			19
+#define CLKID_AO_SYS_I2C_C			20
+#define CLKID_AO_SYS_I2C_D			21
+#define CLKID_AO_SYS_SED			22
+#define CLKID_AO_SYS_IR_CTRL			23
+#define CLKID_AO_SYS_UART_B			24
+#define CLKID_AO_SYS_UART_C			25
+#define CLKID_AO_SYS_UART_D			26
+#define CLKID_AO_SYS_UART_E			27
+#define CLKID_AO_SYS_SPISG_0			28
+#define CLKID_AO_SYS_RTC_SECURE			29
+#define CLKID_AO_SYS_CEC			30
+#define CLKID_AO_SYS_AOCPU			31
+#define CLKID_AO_SYS_SRAM			32
+#define CLKID_AO_SYS_SPISG_1			33
+#define CLKID_AO_SYS_SPISG_2			34
+#define CLKID_AO_PWM_A_SEL			35
+#define CLKID_AO_PWM_A_DIV			36
+#define CLKID_AO_PWM_A				37
+#define CLKID_AO_PWM_B_SEL			38
+#define CLKID_AO_PWM_B_DIV			39
+#define CLKID_AO_PWM_B				40
+#define CLKID_AO_PWM_C_SEL			41
+#define CLKID_AO_PWM_C_DIV			42
+#define CLKID_AO_PWM_C				43
+#define CLKID_AO_PWM_D_SEL			44
+#define CLKID_AO_PWM_D_DIV			45
+#define CLKID_AO_PWM_D				46
+#define CLKID_AO_PWM_E_SEL			47
+#define CLKID_AO_PWM_E_DIV			48
+#define CLKID_AO_PWM_E				49
+#define CLKID_AO_PWM_F_SEL			50
+#define CLKID_AO_PWM_F_DIV			51
+#define CLKID_AO_PWM_F				52
+#define CLKID_AO_PWM_G_SEL			53
+#define CLKID_AO_PWM_G_DIV			54
+#define CLKID_AO_PWM_G				55
+#define CLKID_AO_RTC_DUALDIV_IN			56
+#define CLKID_AO_RTC_DUALDIV_DIV		57
+#define CLKID_AO_RTC_DUALDIV_SEL		58
+#define CLKID_AO_RTC_DUALDIV			59
+#define CLKID_AO_RTC				60
+#define CLKID_AO_CEC_DUALDIV_IN			61
+#define CLKID_AO_CEC_DUALDIV_DIV		62
+#define CLKID_AO_CEC_DUALDIV_SEL		63
+#define CLKID_AO_CEC_DUALDIV			64
+#define CLKID_AO_CEC				65
+
+#endif  /* __AMLOGIC_A9_AO_CLKC_H */

-- 
2.47.1

[PATCH v4 2/2] clk: amlogic: Add A9 AO clock controller driver

[Jian Hu via B4 Relay]

From: Jian Hu <jian.hu@amlogic.com>

Add the Always-on clock controller driver for the Amlogic A9 SoC family.

Signed-off-by: Jian Hu <jian.hu@amlogic.com>
---
 drivers/clk/meson/Kconfig    |  13 ++
 drivers/clk/meson/Makefile   |   1 +
 drivers/clk/meson/a9-aoclk.c | 488 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 502 insertions(+)

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index cf8cf3f9e4ee..b71299898197 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -132,6 +132,19 @@ config COMMON_CLK_A1_PERIPHERALS
 	  device, A1 SoC Family. Say Y if you want A1 Peripherals clock
 	  controller to work.
 
+config COMMON_CLK_A9_AO
+	tristate "Amlogic A9 SoC AO clock controller support"
+	depends on ARM64 || COMPILE_TEST
+	default ARCH_MESON
+	select COMMON_CLK_MESON_REGMAP
+	select COMMON_CLK_MESON_CLKC_UTILS
+	select COMMON_CLK_MESON_DUALDIV
+	imply COMMON_CLK_SCMI
+	help
+	  Support for the AO clock controller on Amlogic A311Y3 based
+	  device, AKA A9.
+	  Say Y if you want A9 AO clock controller to work.
+
 config COMMON_CLK_C3_PLL
 	tristate "Amlogic C3 PLL clock controller"
 	depends on ARM64
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index c6719694a242..f89d027c282c 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
 obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
 obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
+obj-$(CONFIG_COMMON_CLK_A9_AO) += a9-aoclk.o
 obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
 obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
 obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
diff --git a/drivers/clk/meson/a9-aoclk.c b/drivers/clk/meson/a9-aoclk.c
new file mode 100644
index 000000000000..88aa8cf3f5d0
--- /dev/null
+++ b/drivers/clk/meson/a9-aoclk.c
@@ -0,0 +1,488 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright (C) 2026 Amlogic, Inc. All rights reserved
+ */
+
+#include <dt-bindings/clock/amlogic,a9-aoclkc.h>
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include "clk-regmap.h"
+#include "clk-dualdiv.h"
+#include "meson-clkc-utils.h"
+
+#define AO_OSCIN_CTRL			0x00
+#define AO_SYS_CLK0			0x04
+#define AO_PWM_CLK_A_CTRL		0x1c
+#define AO_PWM_CLK_B_CTRL		0x20
+#define AO_PWM_CLK_C_CTRL		0x24
+#define AO_PWM_CLK_D_CTRL		0x28
+#define AO_PWM_CLK_E_CTRL		0x2c
+#define AO_PWM_CLK_F_CTRL		0x30
+#define AO_PWM_CLK_G_CTRL		0x34
+#define AO_CEC_CTRL0			0x38
+#define AO_CEC_CTRL1			0x3c
+#define AO_RTC_BY_OSCIN_CTRL0		0x50
+#define AO_RTC_BY_OSCIN_CTRL1		0x54
+
+#define A9_COMP_SEL(_name, _reg, _shift, _mask, _pdata) \
+	MESON_COMP_SEL(a9_ao_, _name, _reg, _shift, _mask, _pdata, NULL, 0, 0)
+
+#define A9_COMP_DIV(_name, _reg, _shift, _width) \
+	MESON_COMP_DIV(a9_ao_, _name, _reg, _shift, _width, 0, CLK_SET_RATE_PARENT)
+
+#define A9_COMP_GATE(_name, _reg, _bit) \
+	MESON_COMP_GATE(a9_ao_, _name, _reg, _bit, CLK_SET_RATE_PARENT)
+
+static struct clk_regmap a9_ao_xtal_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = AO_OSCIN_CTRL,
+		.bit_idx = 3,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ao_xtal_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap a9_ao_xtal = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = AO_OSCIN_CTRL,
+		.mask = 0x1,
+		.shift = 0,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ao_xtal",
+		.ops = &clk_regmap_mux_ops,
+		/* ext_32k is from external PAD, do not automatically reparent */
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &a9_ao_xtal_in.hw },
+			{ .fw_name = "ext_32k", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap a9_ao_sys = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = AO_OSCIN_CTRL,
+		.mask = 0x1,
+		.shift = 1,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ao_sys",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &a9_ao_xtal.hw },
+			{ .fw_name = "sys", },
+		},
+		.num_parents = 2,
+	},
+};
+
+static const struct clk_parent_data a9_ao_pclk_parents = { .hw = &a9_ao_sys.hw };
+
+#define A9_AO_PCLK(_name, _bit, _flags)		       \
+	MESON_PCLK(a9_ao_sys_##_name, AO_SYS_CLK0, _bit, \
+		   &a9_ao_pclk_parents, _flags)
+
+/*
+ * A9 integrates a low-power microprocessor (Always-on CPU: AOCPU). Some AO sys
+ * clocks control the AOCPU modules. Mark the AOCPU-related clocks with
+ * CLK_IS_CRITICAL to avoid them being disabled and impacting AOCPU functionality.
+ * AOCPU-related clocks list:
+ * - clktree
+ * - rst_ctrl
+ * - pad
+ * - irq
+ * - pwrctrl
+ * - aocpu
+ * - sram
+ */
+static A9_AO_PCLK(i3c,		0,	0);
+static A9_AO_PCLK(rtc_reg,	1,	0);
+static A9_AO_PCLK(clktree,	2,	CLK_IS_CRITICAL);
+static A9_AO_PCLK(rst_ctrl,	3,	CLK_IS_CRITICAL);
+static A9_AO_PCLK(pad,		4,	CLK_IS_CRITICAL);
+static A9_AO_PCLK(rtc_dig,	5,	0);
+static A9_AO_PCLK(irq,		6,	CLK_IS_CRITICAL);
+static A9_AO_PCLK(pwrctrl,	7,	CLK_IS_CRITICAL);
+static A9_AO_PCLK(pwm_a,	8,	0);
+static A9_AO_PCLK(pwm_b,	9,	0);
+static A9_AO_PCLK(pwm_c,	10,	0);
+static A9_AO_PCLK(pwm_d,	11,	0);
+static A9_AO_PCLK(pwm_e,	12,	0);
+static A9_AO_PCLK(pwm_f,	13,	0);
+static A9_AO_PCLK(pwm_g,	14,	0);
+static A9_AO_PCLK(i2c_a,	15,	0);
+static A9_AO_PCLK(i2c_b,	16,	0);
+static A9_AO_PCLK(i2c_c,	17,	0);
+static A9_AO_PCLK(i2c_d,	18,	0);
+static A9_AO_PCLK(sed,		19,	0);
+static A9_AO_PCLK(ir_ctrl,	20,	0);
+static A9_AO_PCLK(uart_b,	21,	0);
+static A9_AO_PCLK(uart_c,	22,	0);
+static A9_AO_PCLK(uart_d,	23,	0);
+static A9_AO_PCLK(uart_e,	24,	0);
+static A9_AO_PCLK(spisg_0,	25,	0);
+static A9_AO_PCLK(rtc_secure,	26,	0);
+static A9_AO_PCLK(cec,		27,	0);
+static A9_AO_PCLK(aocpu,	28,	CLK_IS_CRITICAL);
+static A9_AO_PCLK(sram,		29,	CLK_IS_CRITICAL);
+static A9_AO_PCLK(spisg_1,	30,	0);
+static A9_AO_PCLK(spisg_2,	31,	0);
+
+static const struct clk_parent_data a9_ao_pwm_parents[] = {
+	{ .hw = &a9_ao_xtal.hw },
+	{ .fw_name = "fdiv5", },
+	{ .fw_name = "fdiv4", },
+	{ .fw_name = "fdiv3", }
+};
+
+static A9_COMP_SEL(pwm_a, AO_PWM_CLK_A_CTRL, 9, 0x7, a9_ao_pwm_parents);
+static A9_COMP_DIV(pwm_a, AO_PWM_CLK_A_CTRL, 0, 8);
+static A9_COMP_GATE(pwm_a, AO_PWM_CLK_A_CTRL, 8);
+
+static A9_COMP_SEL(pwm_b, AO_PWM_CLK_B_CTRL, 9, 0x7, a9_ao_pwm_parents);
+static A9_COMP_DIV(pwm_b, AO_PWM_CLK_B_CTRL, 0, 8);
+static A9_COMP_GATE(pwm_b, AO_PWM_CLK_B_CTRL, 8);
+
+static A9_COMP_SEL(pwm_c, AO_PWM_CLK_C_CTRL, 9, 0x7, a9_ao_pwm_parents);
+static A9_COMP_DIV(pwm_c, AO_PWM_CLK_C_CTRL, 0, 8);
+static A9_COMP_GATE(pwm_c, AO_PWM_CLK_C_CTRL, 8);
+
+static A9_COMP_SEL(pwm_d, AO_PWM_CLK_D_CTRL, 9, 0x7, a9_ao_pwm_parents);
+static A9_COMP_DIV(pwm_d, AO_PWM_CLK_D_CTRL, 0, 8);
+static A9_COMP_GATE(pwm_d, AO_PWM_CLK_D_CTRL, 8);
+
+static A9_COMP_SEL(pwm_e, AO_PWM_CLK_E_CTRL, 9, 0x7, a9_ao_pwm_parents);
+static A9_COMP_DIV(pwm_e, AO_PWM_CLK_E_CTRL, 0, 8);
+static A9_COMP_GATE(pwm_e, AO_PWM_CLK_E_CTRL, 8);
+
+static A9_COMP_SEL(pwm_f, AO_PWM_CLK_F_CTRL, 9, 0x7, a9_ao_pwm_parents);
+static A9_COMP_DIV(pwm_f, AO_PWM_CLK_F_CTRL, 0, 8);
+static A9_COMP_GATE(pwm_f, AO_PWM_CLK_F_CTRL, 8);
+
+static A9_COMP_SEL(pwm_g, AO_PWM_CLK_G_CTRL, 9, 0x7, a9_ao_pwm_parents);
+static A9_COMP_DIV(pwm_g, AO_PWM_CLK_G_CTRL, 0, 8);
+static A9_COMP_GATE(pwm_g, AO_PWM_CLK_G_CTRL, 8);
+
+static struct clk_regmap a9_ao_rtc_dualdiv_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = AO_RTC_BY_OSCIN_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ao_rtc_duandiv_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&a9_ao_xtal.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static const struct meson_clk_dualdiv_param a9_ao_dualdiv_table[] = {
+	{ 733, 732, 8, 11, 1 },
+	{ /* sentinel */ }
+};
+
+static struct clk_regmap a9_ao_rtc_dualdiv_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = AO_RTC_BY_OSCIN_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = AO_RTC_BY_OSCIN_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = AO_RTC_BY_OSCIN_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = AO_RTC_BY_OSCIN_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = AO_RTC_BY_OSCIN_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = a9_ao_dualdiv_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "a9_ao_rtc_dualdiv_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&a9_ao_rtc_dualdiv_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap a9_ao_rtc_dualdiv_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = AO_RTC_BY_OSCIN_CTRL1,
+		.mask = 0x1,
+		.shift = 24,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ao_rtc_dualdiv_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&a9_ao_rtc_dualdiv_div.hw,
+			&a9_ao_rtc_dualdiv_in.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap a9_ao_rtc_dualdiv = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = AO_RTC_BY_OSCIN_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ao_rtc_dualdiv",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&a9_ao_rtc_dualdiv_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap a9_ao_rtc = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = AO_RTC_BY_OSCIN_CTRL1,
+		.mask = 0x1,
+		.shift = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ao_rtc",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&a9_ao_xtal.hw,
+			&a9_ao_rtc_dualdiv.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap a9_ao_cec_dualdiv_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = AO_CEC_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ao_cec_dualdiv_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&a9_ao_xtal.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap a9_ao_cec_dualdiv_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = AO_CEC_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = AO_CEC_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = AO_CEC_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = AO_CEC_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = AO_CEC_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = a9_ao_dualdiv_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ao_cec_dualdiv_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&a9_ao_cec_dualdiv_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap a9_ao_cec_dualdiv_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = AO_CEC_CTRL1,
+		.mask = 0x1,
+		.shift = 24,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ao_cec_dualdiv_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&a9_ao_cec_dualdiv_div.hw,
+			&a9_ao_cec_dualdiv_in.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap a9_ao_cec_dualdiv = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = AO_CEC_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ao_cec_dualdiv",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&a9_ao_cec_dualdiv_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap a9_ao_cec = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = AO_CEC_CTRL1,
+		.mask = 0x1,
+		.shift = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ao_cec",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&a9_ao_cec_dualdiv.hw,
+			&a9_ao_rtc.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_hw *a9_ao_hw_clks[] = {
+	[CLKID_AO_XTAL_IN]		= &a9_ao_xtal_in.hw,
+	[CLKID_AO_XTAL]			= &a9_ao_xtal.hw,
+	[CLKID_AO_SYS]			= &a9_ao_sys.hw,
+	[CLKID_AO_SYS_I3C]		= &a9_ao_sys_i3c.hw,
+	[CLKID_AO_SYS_RTC_REG]		= &a9_ao_sys_rtc_reg.hw,
+	[CLKID_AO_SYS_CLKTREE]		= &a9_ao_sys_clktree.hw,
+	[CLKID_AO_SYS_RST_CTRL]		= &a9_ao_sys_rst_ctrl.hw,
+	[CLKID_AO_SYS_PAD]		= &a9_ao_sys_pad.hw,
+	[CLKID_AO_SYS_RTC_DIG]		= &a9_ao_sys_rtc_dig.hw,
+	[CLKID_AO_SYS_IRQ]		= &a9_ao_sys_irq.hw,
+	[CLKID_AO_SYS_PWRCTRL]		= &a9_ao_sys_pwrctrl.hw,
+	[CLKID_AO_SYS_PWM_A]		= &a9_ao_sys_pwm_a.hw,
+	[CLKID_AO_SYS_PWM_B]		= &a9_ao_sys_pwm_b.hw,
+	[CLKID_AO_SYS_PWM_C]		= &a9_ao_sys_pwm_c.hw,
+	[CLKID_AO_SYS_PWM_D]		= &a9_ao_sys_pwm_d.hw,
+	[CLKID_AO_SYS_PWM_E]		= &a9_ao_sys_pwm_e.hw,
+	[CLKID_AO_SYS_PWM_F]		= &a9_ao_sys_pwm_f.hw,
+	[CLKID_AO_SYS_PWM_G]		= &a9_ao_sys_pwm_g.hw,
+	[CLKID_AO_SYS_I2C_A]		= &a9_ao_sys_i2c_a.hw,
+	[CLKID_AO_SYS_I2C_B]		= &a9_ao_sys_i2c_b.hw,
+	[CLKID_AO_SYS_I2C_C]		= &a9_ao_sys_i2c_c.hw,
+	[CLKID_AO_SYS_I2C_D]		= &a9_ao_sys_i2c_d.hw,
+	[CLKID_AO_SYS_SED]		= &a9_ao_sys_sed.hw,
+	[CLKID_AO_SYS_IR_CTRL]		= &a9_ao_sys_ir_ctrl.hw,
+	[CLKID_AO_SYS_UART_B]		= &a9_ao_sys_uart_b.hw,
+	[CLKID_AO_SYS_UART_C]		= &a9_ao_sys_uart_c.hw,
+	[CLKID_AO_SYS_UART_D]		= &a9_ao_sys_uart_d.hw,
+	[CLKID_AO_SYS_UART_E]		= &a9_ao_sys_uart_e.hw,
+	[CLKID_AO_SYS_SPISG_0]		= &a9_ao_sys_spisg_0.hw,
+	[CLKID_AO_SYS_RTC_SECURE]	= &a9_ao_sys_rtc_secure.hw,
+	[CLKID_AO_SYS_CEC]		= &a9_ao_sys_cec.hw,
+	[CLKID_AO_SYS_AOCPU]		= &a9_ao_sys_aocpu.hw,
+	[CLKID_AO_SYS_SRAM]		= &a9_ao_sys_sram.hw,
+	[CLKID_AO_SYS_SPISG_1]		= &a9_ao_sys_spisg_1.hw,
+	[CLKID_AO_SYS_SPISG_2]		= &a9_ao_sys_spisg_2.hw,
+	[CLKID_AO_PWM_A_SEL]		= &a9_ao_pwm_a_sel.hw,
+	[CLKID_AO_PWM_A_DIV]		= &a9_ao_pwm_a_div.hw,
+	[CLKID_AO_PWM_A]		= &a9_ao_pwm_a.hw,
+	[CLKID_AO_PWM_B_SEL]		= &a9_ao_pwm_b_sel.hw,
+	[CLKID_AO_PWM_B_DIV]		= &a9_ao_pwm_b_div.hw,
+	[CLKID_AO_PWM_B]		= &a9_ao_pwm_b.hw,
+	[CLKID_AO_PWM_C_SEL]		= &a9_ao_pwm_c_sel.hw,
+	[CLKID_AO_PWM_C_DIV]		= &a9_ao_pwm_c_div.hw,
+	[CLKID_AO_PWM_C]		= &a9_ao_pwm_c.hw,
+	[CLKID_AO_PWM_D_SEL]		= &a9_ao_pwm_d_sel.hw,
+	[CLKID_AO_PWM_D_DIV]		= &a9_ao_pwm_d_div.hw,
+	[CLKID_AO_PWM_D]		= &a9_ao_pwm_d.hw,
+	[CLKID_AO_PWM_E_SEL]		= &a9_ao_pwm_e_sel.hw,
+	[CLKID_AO_PWM_E_DIV]		= &a9_ao_pwm_e_div.hw,
+	[CLKID_AO_PWM_E]		= &a9_ao_pwm_e.hw,
+	[CLKID_AO_PWM_F_SEL]		= &a9_ao_pwm_f_sel.hw,
+	[CLKID_AO_PWM_F_DIV]		= &a9_ao_pwm_f_div.hw,
+	[CLKID_AO_PWM_F]		= &a9_ao_pwm_f.hw,
+	[CLKID_AO_PWM_G_SEL]		= &a9_ao_pwm_g_sel.hw,
+	[CLKID_AO_PWM_G_DIV]		= &a9_ao_pwm_g_div.hw,
+	[CLKID_AO_PWM_G]		= &a9_ao_pwm_g.hw,
+	[CLKID_AO_RTC_DUALDIV_IN]	= &a9_ao_rtc_dualdiv_in.hw,
+	[CLKID_AO_RTC_DUALDIV_DIV]	= &a9_ao_rtc_dualdiv_div.hw,
+	[CLKID_AO_RTC_DUALDIV_SEL]	= &a9_ao_rtc_dualdiv_sel.hw,
+	[CLKID_AO_RTC_DUALDIV]		= &a9_ao_rtc_dualdiv.hw,
+	[CLKID_AO_RTC]			= &a9_ao_rtc.hw,
+	[CLKID_AO_CEC_DUALDIV_IN]	= &a9_ao_cec_dualdiv_in.hw,
+	[CLKID_AO_CEC_DUALDIV_DIV]	= &a9_ao_cec_dualdiv_div.hw,
+	[CLKID_AO_CEC_DUALDIV_SEL]	= &a9_ao_cec_dualdiv_sel.hw,
+	[CLKID_AO_CEC_DUALDIV]		= &a9_ao_cec_dualdiv.hw,
+	[CLKID_AO_CEC]			= &a9_ao_cec.hw,
+};
+
+static const struct meson_clkc_data a9_ao_clkc_data = {
+	.hw_clks = {
+		.hws = a9_ao_hw_clks,
+		.num = ARRAY_SIZE(a9_ao_hw_clks),
+	},
+};
+
+static const struct of_device_id a9_ao_clkc_match_table[] = {
+	{
+		.compatible	= "amlogic,a9-aoclkc",
+		.data		= &a9_ao_clkc_data,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, a9_ao_clkc_match_table);
+
+static struct platform_driver a9_ao_clkc_driver = {
+	.probe		= meson_clkc_mmio_probe,
+	.driver		= {
+		.name	= "a9-aoclkc",
+		.of_match_table = a9_ao_clkc_match_table,
+	},
+};
+module_platform_driver(a9_ao_clkc_driver);
+
+MODULE_DESCRIPTION("Amlogic A9 Always-ON Clock Controller driver");
+MODULE_AUTHOR("Jian Hu <jian.hu@amlogic.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("CLK_MESON");

-- 
2.47.1

Re: [PATCH v4 2/2] clk: amlogic: Add A9 AO clock controller driver

[Julian Braha]

Hi Jian,

On 6/18/26 10:49, Jian Hu via B4 Relay wrote:

> +config COMMON_CLK_A9_AO
> +	tristate "Amlogic A9 SoC AO clock controller support"
> +	depends on ARM64 || COMPILE_TEST
> +	default ARCH_MESON
> +	select COMMON_CLK_MESON_REGMAP
> +	select COMMON_CLK_MESON_CLKC_UTILS
> +	select COMMON_CLK_MESON_DUALDIV

Selecting COMMON_CLK_MESON_REGMAP is unnecessary since you're already
selecting COMMON_CLK_MESON_DUALDIV here.

- Julian Braha

Re: [PATCH v4 2/2] clk: amlogic: Add A9 AO clock controller driver

[Jerome Brunet]

On jeu. 18 juin 2026 at 19:56, Julian Braha <julianbraha@gmail.com> wrote:

> Hi Jian,
>
> On 6/18/26 10:49, Jian Hu via B4 Relay wrote:
>
>> +config COMMON_CLK_A9_AO
>> +	tristate "Amlogic A9 SoC AO clock controller support"
>> +	depends on ARM64 || COMPILE_TEST
>> +	default ARCH_MESON
>> +	select COMMON_CLK_MESON_REGMAP
>> +	select COMMON_CLK_MESON_CLKC_UTILS
>> +	select COMMON_CLK_MESON_DUALDIV
>
> Selecting COMMON_CLK_MESON_REGMAP is unnecessary since you're already
> selecting COMMON_CLK_MESON_DUALDIV here.

No, regmap clock are directly used so this is necessary.
Relying on other module dependencies is not enough

>
> - Julian Braha

-- 
Jerome

Re: [PATCH v4 0/2] clk: amlogic: Add A9 AO clock controller

[Jerome Brunet]

On jeu. 18 juin 2026 at 17:49, Jian Hu via B4 Relay <devnull+jian.hu.amlogic.com@kernel.org> wrote:

> This series adds Amlogic A9 AO clock support, including dt-binding and AO clock driver.
>
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>

A part from the 2 minor problems found by sashiko, This looks good.

> ---
> Changes in v4:
> - Drop CLK_IS_CRITICAL for ao_xtal_in clock.
> - Drop CLK_HW_INIT* and revert to explicit clock declarations.
> - Link to v3: https://lore.kernel.org/r/20260610-a9_aoclk-v3-0-b7592d6c31e2@amlogic.com
>
> Changes in v3:
> - Move COMPILE_TEST after 'depends on ARM64' reported by sashiko-bot.
> - Rename i2c3 to i3c reported by sashiko-bot.
> - Reword the comment describing ao_xtal_in's flags.
> - Use struct clk_init_data to describe ao_xtal_in's hw.init.
> - Link to v2: https://lore.kernel.org/r/20260603-a9_aoclk-v2-0-f47ea616ee78@amlogic.com
>
> Changes in v2:
> - Split the A9 clock driver and send the AO clock separately.
> - Rename aobus to soc.
> - Use CLK_HW_INIT_FW_NAME to describe clk_init_data.
> - Use CLK_HW_INIT_PARENTS_DATA to describe clk_init_data.
> - Use a9_ao prefix for MESON_COMP_SEL.
> - Correct duandiv name.
> - Fix pwm b reg.
> - Link to v1: https://lore.kernel.org/all/20260511-b4-a9_clk-v1-0-41cb4071b7c9@amlogic.com/
>
> ---
> Jian Hu (2):
>       dt-bindings: clock: Add Amlogic A9 AO clock controller
>       clk: amlogic: Add A9 AO clock controller driver
>
>  .../bindings/clock/amlogic,a9-aoclkc.yaml          |  76 ++++
>  drivers/clk/meson/Kconfig                          |  13 +
>  drivers/clk/meson/Makefile                         |   1 +
>  drivers/clk/meson/a9-aoclk.c                       | 488 +++++++++++++++++++++
>  include/dt-bindings/clock/amlogic,a9-aoclkc.h      |  76 ++++
>  5 files changed, 654 insertions(+)
> ---
> base-commit: ca89c88bcf69daca829044c638a8163d5ce47af0
> change-id: 20260603-a9_aoclk-bbf531badc63
>
> Best regards,

-- 
Jerome

Re: [PATCH v4 2/2] clk: amlogic: Add A9 AO clock controller driver

[Julian Braha]

Hi Jerome,

On 6/19/26 08:29, Jerome Brunet wrote:
> No, regmap clock are directly used so this is necessary.
> Relying on other module dependencies is not enough

What do you mean it's "not enough"?

Functionally, any user of COMMON_CLK_MESON_DUALDIV can also use
COMMON_CLK_MESON_REGMAP.

Unless you mean for documentation purposes?

- Julian Braha

Re: [PATCH v4 2/2] clk: amlogic: Add A9 AO clock controller driver

[Jerome Brunet]

On ven. 19 juin 2026 at 08:48, Julian Braha <julianbraha@gmail.com> wrote:

> Hi Jerome,
>
> On 6/19/26 08:29, Jerome Brunet wrote:
>> No, regmap clock are directly used so this is necessary.
>> Relying on other module dependencies is not enough
>
> What do you mean it's "not enough"?
>
> Functionally, any user of COMMON_CLK_MESON_DUALDIV can also use
> COMMON_CLK_MESON_REGMAP.

This driver directly use regmap clocks. This is a direct dependency,
required for the build and stated as such. If the module needs it, it
depends on it, simply.

Relying on indirect dependencies is incorrect and fragile.
If those dependencies ever change, the build breaks for no obvious reason.

>
> Unless you mean for documentation purposes?
>
> - Julian Braha

-- 
Jerome