Change SUEN3 MACH to KMKIRKWOOD

Change SUEN3 MACH to KMKIRKWOOD

[Valentin Longchamp]

Hello Russel,

Denx developper Stefan Roese had registered the MACH_SUEN3 with number 
2255 when they had ported u-boot for our SUEN3 board.

Our company now has developped several boards with the same architecture 
(and thus share quite a lot of code) and the MACH_SUEN3 really is board 
specific and while it should define something generic. We have 
disscussed with Stefan and have agreed that the best would be to keep 
this MACH number but to change its name to something that is common to 
all the boards and thus more logical for us.

Could you please change the MACH_SUEN3 (and all the corresponding suen3 
occurences) to MACH_KM_KIRKWOOD (respectively km_kirkwood) in the 
arch/arm/tools/mach-types file and the corresponding database ?

Thanks and best regards

-- 
Valentin Longchamp
Embedded Software Engineer
Hardware and Chip Integration
______________________________________
KEYMILE AG
Schwarzenburgstr. 73
CH-3097 Liebefeld
Phone +41 31 377 1318
Fax     +41 31 377 1212
valentin.longchamp at keymile.com
www.keymile.com
______________________________________
 >>Be the FIRST on the LAST MILE<<

Change SUEN3 MACH to KM_KIRKWOOD

[Valentin Longchamp]

Sorry I made a typo in the subject of the previous mail.

To avoid any confusion, the desired name definitely is KM_KIRKWOOD (and 
not KMKIRKWOOD as written in the subject of the previous mail).

Valentin Longchamp wrote:
> Hello Russel,
> 
> Denx developper Stefan Roese had registered the MACH_SUEN3 with number 
> 2255 when they had ported u-boot for our SUEN3 board.
> 
> Our company now has developped several boards with the same architecture 
> (and thus share quite a lot of code) and the MACH_SUEN3 really is board 
> specific and while it should define something generic. We have 
> disscussed with Stefan and have agreed that the best would be to keep 
> this MACH number but to change its name to something that is common to 
> all the boards and thus more logical for us.
> 
> Could you please change the MACH_SUEN3 (and all the corresponding suen3 
> occurences) to MACH_KM_KIRKWOOD (respectively km_kirkwood) in the 
> arch/arm/tools/mach-types file and the corresponding database ?
> 
> Thanks and best regards
> 

Change SUEN3 MACH to KM_KIRKWOOD

[Russell King - ARM Linux]

On Tue, Jan 11, 2011 at 09:38:57AM +0100, Valentin Longchamp wrote:
> Sorry I made a typo in the subject of the previous mail.
>
> To avoid any confusion, the desired name definitely is KM_KIRKWOOD (and  
> not KMKIRKWOOD as written in the subject of the previous mail).

Please confirm that that the update I've just done is correct.  Thanks.

Change SUEN3 MACH to KM_KIRKWOOD

[Valentin Longchamp]

Russell King - ARM Linux wrote:
> On Tue, Jan 11, 2011 at 09:38:57AM +0100, Valentin Longchamp wrote:
>> Sorry I made a typo in the subject of the previous mail.
>>
>> To avoid any confusion, the desired name definitely is KM_KIRKWOOD (and  
>> not KMKIRKWOOD as written in the subject of the previous mail).
> 
> Please confirm that that the update I've just done is correct.  Thanks.

Yes the current name in the database is correct. Thank you for the change.

-- 
Valentin Longchamp
Embedded Software Engineer
Hardware and Chip Integration
______________________________________
KEYMILE AG
Schwarzenburgstr. 73
CH-3097 Liebefeld
Phone +41 31 377 1318
Fax     +41 31 377 1212
valentin.longchamp at keymile.com
www.keymile.com
______________________________________
 >>Be the FIRST on the LAST MILE<<