* [PATCH 0/5] OMAP: clock: miscellaneous fixes and dead code removal for 2.6.39
@ 2011-02-17 4:17 Paul Walmsley
2011-02-17 4:17 ` [PATCH 1/5] OMAP2xxx: clock: fix parents for L3-derived clocks Paul Walmsley
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Paul Walmsley @ 2011-02-17 4:17 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
This series contains some OMAP clock patches for 2.6.39. The patches
in this series fix some long-standing inaccuracies in the OMAP2xxx clock trees,
prepare for some clock framework locking changes, and remove some
DPLL rate rounding code that I don't think anyone is using.
Dynamic idle entry and exit has been tested on an OMAP3530 Beagleboard, and
the "before" and "after" clock trees have been verified on an N800.
- Paul
---
clk_b_2.6.39
text data bss dec hex filename
3697449 229488 5390028 9316965 8e2a65 vmlinux.n800.orig
3697325 229584 5390028 9316937 8e2a49 vmlinux.n800.patched
Paul Walmsley (5):
OMAP2xxx: clock: fix parents for L3-derived clocks
OMAP2xxx: clock: fix low-frequency oscillator clock rate
OMAP2xxx: clock: fix interface clocks and clockdomains for modules in the WKUP domain
OMAP: clock: bail out early if arch_clock functions not implemented
OMAP2+: clock: remove the DPLL rate tolerance code
arch/arm/mach-omap2/clkt_dpll.c | 91 ++++++++-----------------------
arch/arm/mach-omap2/clock.h | 4 -
arch/arm/mach-omap2/clock2420_data.c | 38 ++++++++-----
arch/arm/mach-omap2/clock2430_data.c | 46 +++++++++-------
arch/arm/mach-omap2/clock3xxx_data.c | 6 --
arch/arm/plat-omap/clock.c | 66 +++++++++++++---------
arch/arm/plat-omap/include/plat/clock.h | 7 --
7 files changed, 112 insertions(+), 146 deletions(-)
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/5] OMAP2xxx: clock: fix parents for L3-derived clocks
2011-02-17 4:17 [PATCH 0/5] OMAP: clock: miscellaneous fixes and dead code removal for 2.6.39 Paul Walmsley
@ 2011-02-17 4:17 ` Paul Walmsley
2011-02-17 4:17 ` [PATCH 2/5] OMAP2xxx: clock: fix low-frequency oscillator clock rate Paul Walmsley
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Paul Walmsley @ 2011-02-17 4:17 UTC (permalink / raw)
To: linux-arm-kernel
Several clocks are listed as having the core L4 clock as their parent,
when they are actually derived from the L3 clock. Fix these.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/clock2420_data.c | 2 +-
arch/arm/mach-omap2/clock2430_data.c | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index 68c0369..693a0a8 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1614,7 +1614,7 @@ static struct clk sdma_fck = {
static struct clk sdma_ick = {
.name = "sdma_ick",
.ops = &clkops_omap2_iclk_idle_only,
- .parent = &l4_ck,
+ .parent = &core_l3_ck,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
.enable_bit = OMAP24XX_AUTO_SDMA_SHIFT,
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 34daed9..f00f52e 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1652,7 +1652,7 @@ static struct clk sdma_fck = {
static struct clk sdma_ick = {
.name = "sdma_ick",
.ops = &clkops_omap2_iclk_idle_only,
- .parent = &l4_ck,
+ .parent = &core_l3_ck,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
.enable_bit = OMAP24XX_AUTO_SDMA_SHIFT,
@@ -1662,9 +1662,9 @@ static struct clk sdma_ick = {
static struct clk sdrc_ick = {
.name = "sdrc_ick",
.ops = &clkops_omap2_iclk_idle_only,
- .parent = &l4_ck,
+ .parent = &core_l3_ck,
.flags = ENABLE_ON_INIT,
- .clkdm_name = "core_l4_clkdm",
+ .clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
.enable_bit = OMAP2430_EN_SDRC_SHIFT,
.recalc = &followparent_recalc,
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/5] OMAP2xxx: clock: fix low-frequency oscillator clock rate
2011-02-17 4:17 [PATCH 0/5] OMAP: clock: miscellaneous fixes and dead code removal for 2.6.39 Paul Walmsley
2011-02-17 4:17 ` [PATCH 1/5] OMAP2xxx: clock: fix parents for L3-derived clocks Paul Walmsley
@ 2011-02-17 4:17 ` Paul Walmsley
2011-02-17 4:17 ` [PATCH 3/5] OMAP2xxx: clock: fix interface clocks and clockdomains for modules in the WKUP domain Paul Walmsley
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Paul Walmsley @ 2011-02-17 4:17 UTC (permalink / raw)
To: linux-arm-kernel
The OMAP2420/2430 external 32-kHz low-frequency oscillator is a 32768
Hz oscillator, not a 32,000 Hz oscillator[1][2]. Fix this in the clock
tree.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
1. OMAP2420/22 Multimedia Processor Data Manual, Version P [SWPS019P],
section 5.1.4 "External 32-kHz CMOS Clock" (note that it refers to
a "32.768-kHz" clock; this presumably should be "32.768-KHz")
2. OMAP2430 Multimedia Processor ES2.1 Data Manual, Version V [SWPS023V],
section 5.1.4 "External 32-kHz CMOS Clock" (note that it refers to
a "32.768-kHz" clock; this presumably should be "32.768-KHz")
---
arch/arm/mach-omap2/clock2420_data.c | 2 +-
arch/arm/mach-omap2/clock2430_data.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index 693a0a8..fd5ba90 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -55,7 +55,7 @@
static struct clk func_32k_ck = {
.name = "func_32k_ck",
.ops = &clkops_null,
- .rate = 32000,
+ .rate = 32768,
.clkdm_name = "wkup_clkdm",
};
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index f00f52e..0d069ef 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -55,7 +55,7 @@
static struct clk func_32k_ck = {
.name = "func_32k_ck",
.ops = &clkops_null,
- .rate = 32000,
+ .rate = 32768,
.clkdm_name = "wkup_clkdm",
};
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/5] OMAP2xxx: clock: fix interface clocks and clockdomains for modules in the WKUP domain
2011-02-17 4:17 [PATCH 0/5] OMAP: clock: miscellaneous fixes and dead code removal for 2.6.39 Paul Walmsley
2011-02-17 4:17 ` [PATCH 1/5] OMAP2xxx: clock: fix parents for L3-derived clocks Paul Walmsley
2011-02-17 4:17 ` [PATCH 2/5] OMAP2xxx: clock: fix low-frequency oscillator clock rate Paul Walmsley
@ 2011-02-17 4:17 ` Paul Walmsley
2011-02-17 4:17 ` [PATCH 4/5] OMAP: clock: bail out early if arch_clock functions not implemented Paul Walmsley
2011-02-17 4:17 ` [PATCH 5/5] OMAP2+: clock: remove the DPLL rate tolerance code Paul Walmsley
4 siblings, 0 replies; 6+ messages in thread
From: Paul Walmsley @ 2011-02-17 4:17 UTC (permalink / raw)
To: linux-arm-kernel
The parent of the interface clocks for GPTIMER1, MPU_WDT,
SYNCTIMER_32K, SCM, WDT1, and the ICR (2430 only) were all listed as
being l4_ck. This isn't accurate; these modules exist inside the WKUP
domain, and the interface clock to these modules runs at the SYS_CLK
rate rather than the CORE L4 rate.
So, create a new clock "wu_l4_ick", similar to the OMAP3
"wkup_l4_ick", that serves as the parent for these clocks.
Also, these clocks were listed as existing inside core_l4_clkdm;
wkup_clkdm is probably more accurate.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/clock2420_data.c | 33 +++++++++++++++++++-----------
arch/arm/mach-omap2/clock2430_data.c | 37 +++++++++++++++++++++-------------
2 files changed, 44 insertions(+), 26 deletions(-)
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index fd5ba90..6e9d20d 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -826,6 +826,14 @@ static struct clk dss_54m_fck = { /* Alt clk used in power management */
.recalc = &followparent_recalc,
};
+static struct clk wu_l4_ick = {
+ .name = "wu_l4_ick",
+ .ops = &clkops_null,
+ .parent = &sys_ck,
+ .clkdm_name = "wkup_clkdm",
+ .recalc = &followparent_recalc,
+};
+
/*
* CORE power domain ICLK & FCLK defines.
* Many of the these can have more than one possible parent. Entries
@@ -847,8 +855,8 @@ static const struct clksel omap24xx_gpt_clksel[] = {
static struct clk gpt1_ick = {
.name = "gpt1_ick",
.ops = &clkops_omap2_iclk_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
+ .parent = &wu_l4_ick,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_GPT1_SHIFT,
.recalc = &followparent_recalc,
@@ -1300,8 +1308,8 @@ static struct clk uart3_fck = {
static struct clk gpios_ick = {
.name = "gpios_ick",
.ops = &clkops_omap2_iclk_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
+ .parent = &wu_l4_ick,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_GPIOS_SHIFT,
.recalc = &followparent_recalc,
@@ -1320,8 +1328,8 @@ static struct clk gpios_fck = {
static struct clk mpu_wdt_ick = {
.name = "mpu_wdt_ick",
.ops = &clkops_omap2_iclk_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
+ .parent = &wu_l4_ick,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
.recalc = &followparent_recalc,
@@ -1340,9 +1348,9 @@ static struct clk mpu_wdt_fck = {
static struct clk sync_32k_ick = {
.name = "sync_32k_ick",
.ops = &clkops_omap2_iclk_dflt_wait,
- .parent = &l4_ck,
+ .parent = &wu_l4_ick,
+ .clkdm_name = "wkup_clkdm",
.flags = ENABLE_ON_INIT,
- .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_32KSYNC_SHIFT,
.recalc = &followparent_recalc,
@@ -1351,8 +1359,8 @@ static struct clk sync_32k_ick = {
static struct clk wdt1_ick = {
.name = "wdt1_ick",
.ops = &clkops_omap2_iclk_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
+ .parent = &wu_l4_ick,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_WDT1_SHIFT,
.recalc = &followparent_recalc,
@@ -1361,9 +1369,9 @@ static struct clk wdt1_ick = {
static struct clk omapctrl_ick = {
.name = "omapctrl_ick",
.ops = &clkops_omap2_iclk_dflt_wait,
- .parent = &l4_ck,
+ .parent = &wu_l4_ick,
+ .clkdm_name = "wkup_clkdm",
.flags = ENABLE_ON_INIT,
- .clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_OMAPCTRL_SHIFT,
.recalc = &followparent_recalc,
@@ -1825,6 +1833,7 @@ static struct omap_clk omap2420_clks[] = {
/* L4 domain clocks */
CLK(NULL, "l4_ck", &l4_ck, CK_242X),
CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_242X),
+ CLK(NULL, "wu_l4_ick", &wu_l4_ick, CK_242X),
/* virtual meta-group clock */
CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_242X),
/* general l4 interface ck, multi-parent functional clk */
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 0d069ef..3378dbf 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -814,6 +814,14 @@ static struct clk dss_54m_fck = { /* Alt clk used in power management */
.recalc = &followparent_recalc,
};
+static struct clk wu_l4_ick = {
+ .name = "wu_l4_ick",
+ .ops = &clkops_null,
+ .parent = &sys_ck,
+ .clkdm_name = "wkup_clkdm",
+ .recalc = &followparent_recalc,
+};
+
/*
* CORE power domain ICLK & FCLK defines.
* Many of the these can have more than one possible parent. Entries
@@ -835,8 +843,8 @@ static const struct clksel omap24xx_gpt_clksel[] = {
static struct clk gpt1_ick = {
.name = "gpt1_ick",
.ops = &clkops_omap2_iclk_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
+ .parent = &wu_l4_ick,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_GPT1_SHIFT,
.recalc = &followparent_recalc,
@@ -1380,8 +1388,8 @@ static struct clk uart3_fck = {
static struct clk gpios_ick = {
.name = "gpios_ick",
.ops = &clkops_omap2_iclk_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
+ .parent = &wu_l4_ick,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_GPIOS_SHIFT,
.recalc = &followparent_recalc,
@@ -1400,8 +1408,8 @@ static struct clk gpios_fck = {
static struct clk mpu_wdt_ick = {
.name = "mpu_wdt_ick",
.ops = &clkops_omap2_iclk_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
+ .parent = &wu_l4_ick,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
.recalc = &followparent_recalc,
@@ -1420,9 +1428,9 @@ static struct clk mpu_wdt_fck = {
static struct clk sync_32k_ick = {
.name = "sync_32k_ick",
.ops = &clkops_omap2_iclk_dflt_wait,
- .parent = &l4_ck,
.flags = ENABLE_ON_INIT,
- .clkdm_name = "core_l4_clkdm",
+ .parent = &wu_l4_ick,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_32KSYNC_SHIFT,
.recalc = &followparent_recalc,
@@ -1431,8 +1439,8 @@ static struct clk sync_32k_ick = {
static struct clk wdt1_ick = {
.name = "wdt1_ick",
.ops = &clkops_omap2_iclk_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
+ .parent = &wu_l4_ick,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_WDT1_SHIFT,
.recalc = &followparent_recalc,
@@ -1441,9 +1449,9 @@ static struct clk wdt1_ick = {
static struct clk omapctrl_ick = {
.name = "omapctrl_ick",
.ops = &clkops_omap2_iclk_dflt_wait,
- .parent = &l4_ck,
.flags = ENABLE_ON_INIT,
- .clkdm_name = "core_l4_clkdm",
+ .parent = &wu_l4_ick,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_OMAPCTRL_SHIFT,
.recalc = &followparent_recalc,
@@ -1452,8 +1460,8 @@ static struct clk omapctrl_ick = {
static struct clk icr_ick = {
.name = "icr_ick",
.ops = &clkops_omap2_iclk_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
+ .parent = &wu_l4_ick,
+ .clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP2430_EN_ICR_SHIFT,
.recalc = &followparent_recalc,
@@ -1914,6 +1922,7 @@ static struct omap_clk omap2430_clks[] = {
/* L4 domain clocks */
CLK(NULL, "l4_ck", &l4_ck, CK_243X),
CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X),
+ CLK(NULL, "wu_l4_ick", &wu_l4_ick, CK_243X),
/* virtual meta-group clock */
CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X),
/* general l4 interface ck, multi-parent functional clk */
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 4/5] OMAP: clock: bail out early if arch_clock functions not implemented
2011-02-17 4:17 [PATCH 0/5] OMAP: clock: miscellaneous fixes and dead code removal for 2.6.39 Paul Walmsley
` (2 preceding siblings ...)
2011-02-17 4:17 ` [PATCH 3/5] OMAP2xxx: clock: fix interface clocks and clockdomains for modules in the WKUP domain Paul Walmsley
@ 2011-02-17 4:17 ` Paul Walmsley
2011-02-17 4:17 ` [PATCH 5/5] OMAP2+: clock: remove the DPLL rate tolerance code Paul Walmsley
4 siblings, 0 replies; 6+ messages in thread
From: Paul Walmsley @ 2011-02-17 4:17 UTC (permalink / raw)
To: linux-arm-kernel
Bail out before we take the clockfw_lock spinlock if the corresponding
OMAP1 or OMAP2+ clock function is not defined. The intention is to
reduce and simplify the work that is done inside the spinlock.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/plat-omap/clock.c | 66 +++++++++++++++++++++++++-------------------
1 files changed, 38 insertions(+), 28 deletions(-)
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 2770ddd..c9122dd 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -37,14 +37,16 @@ static struct clk_functions *arch_clock;
int clk_enable(struct clk *clk)
{
unsigned long flags;
- int ret = 0;
+ int ret;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
+ if (!arch_clock || !arch_clock->clk_enable)
+ return -EINVAL;
+
spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_enable)
- ret = arch_clock->clk_enable(clk);
+ ret = arch_clock->clk_enable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
@@ -58,6 +60,9 @@ void clk_disable(struct clk *clk)
if (clk == NULL || IS_ERR(clk))
return;
+ if (!arch_clock || !arch_clock->clk_disable)
+ return;
+
spin_lock_irqsave(&clockfw_lock, flags);
if (clk->usecount == 0) {
pr_err("Trying disable clock %s with 0 usecount\n",
@@ -66,8 +71,7 @@ void clk_disable(struct clk *clk)
goto out;
}
- if (arch_clock->clk_disable)
- arch_clock->clk_disable(clk);
+ arch_clock->clk_disable(clk);
out:
spin_unlock_irqrestore(&clockfw_lock, flags);
@@ -77,7 +81,7 @@ EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
unsigned long flags;
- unsigned long ret = 0;
+ unsigned long ret;
if (clk == NULL || IS_ERR(clk))
return 0;
@@ -97,14 +101,16 @@ EXPORT_SYMBOL(clk_get_rate);
long clk_round_rate(struct clk *clk, unsigned long rate)
{
unsigned long flags;
- long ret = 0;
+ long ret;
if (clk == NULL || IS_ERR(clk))
- return ret;
+ return 0;
+
+ if (!arch_clock || !arch_clock->clk_round_rate)
+ return 0;
spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_round_rate)
- ret = arch_clock->clk_round_rate(clk, rate);
+ ret = arch_clock->clk_round_rate(clk, rate);
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
@@ -119,14 +125,13 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
if (clk == NULL || IS_ERR(clk))
return ret;
+ if (!arch_clock || !arch_clock->clk_set_rate)
+ return ret;
+
spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_set_rate)
- ret = arch_clock->clk_set_rate(clk, rate);
- if (ret == 0) {
- if (clk->recalc)
- clk->rate = clk->recalc(clk);
+ ret = arch_clock->clk_set_rate(clk, rate);
+ if (ret == 0)
propagate_rate(clk);
- }
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
@@ -141,15 +146,14 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
return ret;
+ if (!arch_clock || !arch_clock->clk_set_parent)
+ return ret;
+
spin_lock_irqsave(&clockfw_lock, flags);
if (clk->usecount == 0) {
- if (arch_clock->clk_set_parent)
- ret = arch_clock->clk_set_parent(clk, parent);
- if (ret == 0) {
- if (clk->recalc)
- clk->rate = clk->recalc(clk);
+ ret = arch_clock->clk_set_parent(clk, parent);
+ if (ret == 0)
propagate_rate(clk);
- }
} else
ret = -EBUSY;
spin_unlock_irqrestore(&clockfw_lock, flags);
@@ -399,9 +403,11 @@ void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
{
unsigned long flags;
+ if (!arch_clock || !arch_clock->clk_init_cpufreq_table)
+ return;
+
spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_init_cpufreq_table)
- arch_clock->clk_init_cpufreq_table(table);
+ arch_clock->clk_init_cpufreq_table(table);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
@@ -409,9 +415,11 @@ void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
{
unsigned long flags;
+ if (!arch_clock || !arch_clock->clk_exit_cpufreq_table)
+ return;
+
spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_exit_cpufreq_table)
- arch_clock->clk_exit_cpufreq_table(table);
+ arch_clock->clk_exit_cpufreq_table(table);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
#endif
@@ -429,6 +437,9 @@ static int __init clk_disable_unused(void)
struct clk *ck;
unsigned long flags;
+ if (!arch_clock || !arch_clock->clk_disable_unused)
+ return 0;
+
pr_info("clock: disabling unused clocks to save power\n");
list_for_each_entry(ck, &clocks, node) {
if (ck->ops == &clkops_null)
@@ -438,8 +449,7 @@ static int __init clk_disable_unused(void)
continue;
spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_disable_unused)
- arch_clock->clk_disable_unused(ck);
+ arch_clock->clk_disable_unused(ck);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 5/5] OMAP2+: clock: remove the DPLL rate tolerance code
2011-02-17 4:17 [PATCH 0/5] OMAP: clock: miscellaneous fixes and dead code removal for 2.6.39 Paul Walmsley
` (3 preceding siblings ...)
2011-02-17 4:17 ` [PATCH 4/5] OMAP: clock: bail out early if arch_clock functions not implemented Paul Walmsley
@ 2011-02-17 4:17 ` Paul Walmsley
4 siblings, 0 replies; 6+ messages in thread
From: Paul Walmsley @ 2011-02-17 4:17 UTC (permalink / raw)
To: linux-arm-kernel
Remove the DPLL rate tolerance code that is called during rate
rounding. As far as I know, this code is never used, since it's been
more important for callers of the DPLL round_rate()/set_rate()
functions to obtain an exact rate than it is to save a relatively
small amount of power.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/clkt_dpll.c | 91 ++++++++-----------------------
arch/arm/mach-omap2/clock.h | 4 -
arch/arm/mach-omap2/clock2420_data.c | 1
arch/arm/mach-omap2/clock2430_data.c | 1
arch/arm/mach-omap2/clock3xxx_data.c | 6 --
arch/arm/plat-omap/include/plat/clock.h | 7 --
6 files changed, 24 insertions(+), 86 deletions(-)
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 337392c..17735e7 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -178,12 +178,11 @@ void omap2_init_dpll_parent(struct clk *clk)
if (!dd)
return;
- /* Return bypass rate if DPLL is bypassed */
v = __raw_readl(dd->control_reg);
v &= dd->enable_mask;
v >>= __ffs(dd->enable_mask);
- /* Reparent in case the dpll is in bypass */
+ /* Reparent the struct clk in case the dpll is in bypass */
if (cpu_is_omap24xx()) {
if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
v == OMAP2XXX_EN_DPLL_FRBYPASS)
@@ -260,50 +259,22 @@ u32 omap2_get_dpll_rate(struct clk *clk)
/* DPLL rate rounding code */
/**
- * omap2_dpll_set_rate_tolerance: set the error tolerance during rate rounding
- * @clk: struct clk * of the DPLL
- * @tolerance: maximum rate error tolerance
- *
- * Set the maximum DPLL rate error tolerance for the rate rounding
- * algorithm. The rate tolerance is an attempt to balance DPLL power
- * saving (the least divider value "n") vs. rate fidelity (the least
- * difference between the desired DPLL target rate and the rounded
- * rate out of the algorithm). So, increasing the tolerance is likely
- * to decrease DPLL power consumption and increase DPLL rate error.
- * Returns -EINVAL if provided a null clock ptr or a clk that is not a
- * DPLL; or 0 upon success.
- */
-int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
-{
- if (!clk || !clk->dpll_data)
- return -EINVAL;
-
- clk->dpll_data->rate_tolerance = tolerance;
-
- return 0;
-}
-
-/**
* omap2_dpll_round_rate - round a target rate for an OMAP DPLL
* @clk: struct clk * for a DPLL
* @target_rate: desired DPLL clock rate
*
- * Given a DPLL, a desired target rate, and a rate tolerance, round
- * the target rate to a possible, programmable rate for this DPLL.
- * Rate tolerance is assumed to be set by the caller before this
- * function is called. Attempts to select the minimum possible n
- * within the tolerance to reduce power consumption. Stores the
- * computed (m, n) in the DPLL's dpll_data structure so set_rate()
- * will not need to call this (expensive) function again. Returns ~0
- * if the target rate cannot be rounded, either because the rate is
- * too low or because the rate tolerance is set too tightly; or the
- * rounded rate upon success.
+ * Given a DPLL and a desired target rate, round the target rate to a
+ * possible, programmable rate for this DPLL. Attempts to select the
+ * minimum possible n. Stores the computed (m, n) in the DPLL's
+ * dpll_data structure so set_rate() will not need to call this
+ * (expensive) function again. Returns ~0 if the target rate cannot
+ * be rounded, or the rounded rate upon success.
*/
long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
{
- int m, n, r, e, scaled_max_m;
- unsigned long scaled_rt_rp, new_rate;
- int min_e = -1, min_e_m = -1, min_e_n = -1;
+ int m, n, r, scaled_max_m;
+ unsigned long scaled_rt_rp;
+ unsigned long new_rate = 0;
struct dpll_data *dd;
if (!clk || !clk->dpll_data)
@@ -311,8 +282,8 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
dd = clk->dpll_data;
- pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
- "%ld\n", clk->name, target_rate);
+ pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n",
+ clk->name, target_rate);
scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
@@ -347,39 +318,23 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
if (r == DPLL_MULT_UNDERFLOW)
continue;
- e = target_rate - new_rate;
- pr_debug("clock: n = %d: m = %d: rate error is %d "
- "(new_rate = %ld)\n", n, m, e, new_rate);
-
- if (min_e == -1 ||
- min_e >= (int)(abs(e) - dd->rate_tolerance)) {
- min_e = e;
- min_e_m = m;
- min_e_n = n;
-
- pr_debug("clock: found new least error %d\n", min_e);
+ pr_debug("clock: %s: m = %d: n = %d: new_rate = %ld\n",
+ clk->name, m, n, new_rate);
- /* We found good settings -- bail out now */
- if (min_e <= dd->rate_tolerance)
- break;
+ if (target_rate == new_rate) {
+ dd->last_rounded_m = m;
+ dd->last_rounded_n = n;
+ dd->last_rounded_rate = target_rate;
+ break;
}
}
- if (min_e < 0) {
- pr_debug("clock: error: target rate or tolerance too low\n");
+ if (target_rate != new_rate) {
+ pr_debug("clock: %s: cannot round to rate %ld\n", clk->name,
+ target_rate);
return ~0;
}
- dd->last_rounded_m = min_e_m;
- dd->last_rounded_n = min_e_n;
- dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate,
- min_e_m, min_e_n);
-
- pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
- min_e, min_e_m, min_e_n);
- pr_debug("clock: final rate: %ld (target rate: %ld)\n",
- dd->last_rounded_rate, target_rate);
-
- return dd->last_rounded_rate;
+ return target_rate;
}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 70f8b07..62cfd6c 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -18,9 +18,6 @@
#include <plat/clock.h>
-/* The maximum error between a target DPLL rate and the rounded rate in Hz */
-#define DEFAULT_DPLL_RATE_TOLERANCE 50000
-
/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
#define CORE_CLK_SRC_32K 0x0
#define CORE_CLK_SRC_DPLL 0x1
@@ -55,7 +52,6 @@ void omap2_clk_disable(struct clk *clk);
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
-int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance);
long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
unsigned long omap3_dpll_recalc(struct clk *clk);
unsigned long omap3_clkoutx2_recalc(struct clk *clk);
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index 6e9d20d..22eeafc 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -116,7 +116,6 @@ static struct dpll_data dpll_dd = {
.max_multiplier = 1023,
.min_divider = 1,
.max_divider = 16,
- .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
/*
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 3378dbf..df4cac5 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -116,7 +116,6 @@ static struct dpll_data dpll_dd = {
.max_multiplier = 1023,
.min_divider = 1,
.max_divider = 16,
- .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
/*
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 58db368..b82afec 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -291,7 +291,6 @@ static struct dpll_data dpll1_dd = {
.max_multiplier = OMAP3_MAX_DPLL_MULT,
.min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
- .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll1_ck = {
@@ -364,7 +363,6 @@ static struct dpll_data dpll2_dd = {
.max_multiplier = OMAP3_MAX_DPLL_MULT,
.min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
- .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll2_ck = {
@@ -424,7 +422,6 @@ static struct dpll_data dpll3_dd = {
.max_multiplier = OMAP3_MAX_DPLL_MULT,
.min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
- .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll3_ck = {
@@ -583,7 +580,6 @@ static struct dpll_data dpll4_dd_34xx __initdata = {
.max_multiplier = OMAP3_MAX_DPLL_MULT,
.min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
- .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct dpll_data dpll4_dd_3630 __initdata = {
@@ -607,7 +603,6 @@ static struct dpll_data dpll4_dd_3630 __initdata = {
.max_multiplier = OMAP3630_MAX_JTYPE_DPLL_MULT,
.min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
- .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE,
.flags = DPLL_J_TYPE
};
@@ -939,7 +934,6 @@ static struct dpll_data dpll5_dd = {
.max_multiplier = OMAP3_MAX_DPLL_MULT,
.min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
- .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll5_ck = {
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 48b52fb..072eef1 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -108,7 +108,6 @@ struct clksel {
* @clk_ref: struct clk pointer to the clock's reference clock input
* @control_reg: register containing the DPLL mode bitfield
* @enable_mask: mask of the DPLL mode bitfield in @control_reg
- * @rate_tolerance: maximum variance allowed from target rate (in Hz)
* @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
* @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
* @max_multiplier: maximum valid non-bypass multiplier value (actual)
@@ -134,12 +133,9 @@ struct clksel {
* XXX Some DPLLs have multiple bypass inputs, so it's not technically
* correct to only have one @clk_bypass pointer.
*
- * XXX @rate_tolerance should probably be deprecated - currently there
- * don't seem to be any usecases for DPLL rounding that is not exact.
- *
* XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
* @last_rounded_n) should be separated from the runtime-fixed fields
- * and placed into a differenct structure, so that the runtime-fixed data
+ * and placed into a different structure, so that the runtime-fixed data
* can be placed into read-only space.
*/
struct dpll_data {
@@ -150,7 +146,6 @@ struct dpll_data {
struct clk *clk_ref;
void __iomem *control_reg;
u32 enable_mask;
- unsigned int rate_tolerance;
unsigned long last_rounded_rate;
u16 last_rounded_m;
u16 max_multiplier;
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-02-17 4:17 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-02-17 4:17 [PATCH 0/5] OMAP: clock: miscellaneous fixes and dead code removal for 2.6.39 Paul Walmsley
2011-02-17 4:17 ` [PATCH 1/5] OMAP2xxx: clock: fix parents for L3-derived clocks Paul Walmsley
2011-02-17 4:17 ` [PATCH 2/5] OMAP2xxx: clock: fix low-frequency oscillator clock rate Paul Walmsley
2011-02-17 4:17 ` [PATCH 3/5] OMAP2xxx: clock: fix interface clocks and clockdomains for modules in the WKUP domain Paul Walmsley
2011-02-17 4:17 ` [PATCH 4/5] OMAP: clock: bail out early if arch_clock functions not implemented Paul Walmsley
2011-02-17 4:17 ` [PATCH 5/5] OMAP2+: clock: remove the DPLL rate tolerance code Paul Walmsley
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox