[GIT PULL v3] Renesas ARM-based SoC boards for v3.8

[GIT PULL v3] Renesas ARM-based SoC boards for v3.8

[Simon Horman]

Hi Olof, Hi Arnd,

please consider the following board enhancements for 3.8.

This differs from v2 of this pull request in that:
* Several patches have been moved to the soc branch which
  I will send a pull request for shortly.
  - ARM: shmobile: r8a7779: add HSPI clock support
  - ARM: shmobile: r8a7779: add I2C clock support
  - ARM: shmobile: r8a7779: add I2C driver support
  - ARM: shmobile: r8a7740: Enable PMU
* Several new patches have been added.
  - ARM: shmobile: Remove G4EVM machine support
  - ARM: shmobile: Remove G3EVM machine support

---------------------------------------------------------------
The following changes since commit ddffeb8c4d0331609ef2581d84de4d763607bd37:

  Linux 3.7-rc1 (2012-10-14 14:41:04 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git boards

for you to fetch changes up to 631a7b5d958d2ef2c2333b105794c693642f0641:

  ARM: shmobile: Remove G4EVM machine support (2012-10-30 15:25:59 +0800)

----------------------------------------------------------------
Kuninori Morimoto (2):
      ARM: shmobile: armadillo800eva: enable restart
      ARM: shmobile: marzen: add HSPI support

Nobuhiro Iwamatsu (3):
      ARM: mach-shmobile: Use DT_MACHINE for mackerel
      ARM: shmobile: Remove G3EVM machine support
      ARM: shmobile: Remove G4EVM machine support

Tetsuyuki Kobayashi (3):
      ARM: shmobile: kzm9g: enable magnetometer ak8975.
      ARM: shmobile: kzm9g: enable three-axis digital accelerometer ADXL345
      ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2

 arch/arm/boot/dts/Makefile                     |    3 +-
 arch/arm/boot/dts/sh7372-mackerel.dts          |   22 ++
 arch/arm/configs/g3evm_defconfig               |   57 ----
 arch/arm/configs/g4evm_defconfig               |   57 ----
 arch/arm/configs/kzm9g_defconfig               |    4 +
 arch/arm/configs/marzen_defconfig              |    4 +
 arch/arm/mach-shmobile/Kconfig                 |   17 +-
 arch/arm/mach-shmobile/Makefile                |    2 -
 arch/arm/mach-shmobile/board-armadillo800eva.c |    8 +
 arch/arm/mach-shmobile/board-g3evm.c           |  343 ---------------------
 arch/arm/mach-shmobile/board-g4evm.c           |  384 ------------------------
 arch/arm/mach-shmobile/board-kzm9g.c           |   14 +-
 arch/arm/mach-shmobile/board-mackerel.c        |    8 +-
 arch/arm/mach-shmobile/board-marzen.c          |   25 ++
 14 files changed, 87 insertions(+), 861 deletions(-)
 create mode 100644 arch/arm/boot/dts/sh7372-mackerel.dts
 delete mode 100644 arch/arm/configs/g3evm_defconfig
 delete mode 100644 arch/arm/configs/g4evm_defconfig
 delete mode 100644 arch/arm/mach-shmobile/board-g3evm.c
 delete mode 100644 arch/arm/mach-shmobile/board-g4evm.c

[PATCH 1/8] ARM: shmobile: kzm9g: enable magnetometer ak8975.

[Simon Horman]

From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>

This patch enables magnetometer ak8975.
I checked ak8975_probe() returns successfully.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/kzm9g_defconfig     |    2 ++
 arch/arm/mach-shmobile/board-kzm9g.c |    6 +++++-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index c88b578..1404b04 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -119,6 +119,8 @@ CONFIG_DMADEVICES=y
 CONFIG_SH_DMAE=y
 CONFIG_ASYNC_TX_DMA=y
 CONFIG_STAGING=y
+CONFIG_SENSORS_AK8975=y
+CONFIG_IIO=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY_USER=y
 CONFIG_VFAT_FS=y
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 0a43f31..a37da78 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -557,7 +557,11 @@ static struct i2c_board_info i2c0_devices[] = {
 	},
 	{
 		I2C_BOARD_INFO("r2025sd", 0x32),
-	}
+	},
+	{
+		I2C_BOARD_INFO("ak8975", 0x0c),
+		.irq = intcs_evt2irq(0x3380), /* IRQ28 */
+	},
 };
 
 static struct i2c_board_info i2c1_devices[] = {
-- 
1.7.10.4

[PATCH 2/8] ARM: shmobile: kzm9g: enable three-axis digital accelerometer ADXL345

[Simon Horman]

From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>

This patch enables three-axis digital accelerometer ADXL345.
Test:
  sudo cat /dev/input/event2
then tip up the board. You get something from /dev/input/event2.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/kzm9g_defconfig     |    2 ++
 arch/arm/mach-shmobile/board-kzm9g.c |    4 ++++
 2 files changed, 6 insertions(+)

diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index 1404b04..ce99e3e 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -74,6 +74,8 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ST1232=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_ADXL34X=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=9
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index a37da78..1a46422 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -562,6 +562,10 @@ static struct i2c_board_info i2c0_devices[] = {
 		I2C_BOARD_INFO("ak8975", 0x0c),
 		.irq = intcs_evt2irq(0x3380), /* IRQ28 */
 	},
+	{
+		I2C_BOARD_INFO("adxl34x", 0x1d),
+		.irq = intcs_evt2irq(0x3340), /* IRQ26 */
+	},
 };
 
 static struct i2c_board_info i2c1_devices[] = {
-- 
1.7.10.4

[PATCH 3/8] ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2

[Simon Horman]

From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>

This patch enables DMAEngine on SHDI0 and SDHI2 for kzm9g.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
---
 arch/arm/mach-shmobile/board-kzm9g.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 1a46422..f63f2ee 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -384,6 +384,8 @@ static struct regulator_consumer_supply fixed2v8_power_consumers[] =
 
 /* SDHI */
 static struct sh_mobile_sdhi_info sdhi0_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
 	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
@@ -424,6 +426,8 @@ static struct platform_device sdhi0_device = {
 
 /* Micro SD */
 static struct sh_mobile_sdhi_info sdhi2_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI2_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI2_RX,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
 			  TMIO_MMC_USE_GPIO_CD |
 			  TMIO_MMC_WRPROTECT_DISABLE,
-- 
1.7.10.4

[PATCH 4/8] ARM: shmobile: armadillo800eva: enable restart

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Cc: Masahiro Nakai <nakai@atmark-techno.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/board-armadillo800eva.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 2912eab..fe27d7e 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1229,6 +1229,13 @@ static void __init eva_add_early_devices(void)
 	shmobile_timer.init = eva_earlytimer_init;
 }
 
+#define RESCNT2 IOMEM(0xe6188020)
+static void eva_restart(char mode, const char *cmd)
+{
+	/* Do soft power on reset */
+	writel((1 << 31), RESCNT2);
+}
+
 static const char *eva_boards_compat_dt[] __initdata = {
 	"renesas,armadillo800eva",
 	NULL,
@@ -1243,4 +1250,5 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
 	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 	.dt_compat	= eva_boards_compat_dt,
+	.restart	= eva_restart,
 MACHINE_END
-- 
1.7.10.4

[PATCH 5/8] ARM: shmobile: marzen: add HSPI support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/marzen_defconfig     |    4 ++++
 arch/arm/mach-shmobile/board-marzen.c |   25 +++++++++++++++++++++++++
 2 files changed, 29 insertions(+)

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 53382b6..5b8215f 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -69,6 +69,10 @@ CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_HSPI=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index b8a7525..69f7f46 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -30,6 +30,8 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/sh_hspi.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <mach/hardware.h>
@@ -126,10 +128,27 @@ static struct platform_device thermal_device = {
 	.num_resources	= ARRAY_SIZE(thermal_resources),
 };
 
+/* HSPI */
+static struct resource hspi_resources[] = {
+	[0] = {
+		.start		= 0xFFFC7000,
+		.end		= 0xFFFC7018 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device hspi_device = {
+	.name	= "sh-hspi",
+	.id	= 0,
+	.resource	= hspi_resources,
+	.num_resources	= ARRAY_SIZE(hspi_resources),
+};
+
 static struct platform_device *marzen_devices[] __initdata = {
 	&eth_device,
 	&sdhi0_device,
 	&thermal_device,
+	&hspi_device,
 };
 
 static void __init marzen_init(void)
@@ -163,6 +182,12 @@ static void __init marzen_init(void)
 	gpio_request(GPIO_FN_SD0_CD, NULL);
 	gpio_request(GPIO_FN_SD0_WP, NULL);
 
+	/* HSPI 0 */
+	gpio_request(GPIO_FN_HSPI_CLK0,	NULL);
+	gpio_request(GPIO_FN_HSPI_CS0,	NULL);
+	gpio_request(GPIO_FN_HSPI_TX0,	NULL);
+	gpio_request(GPIO_FN_HSPI_RX0,	NULL);
+
 	r8a7779_add_standard_devices();
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }
-- 
1.7.10.4

[PATCH 6/8] ARM: mach-shmobile: Use DT_MACHINE for mackerel

[Simon Horman]

From: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>

Use DT_MACHINE_START() on the sh7372 based mackerel board.

Also include a tiny DTS file to describe the board and update the
Kconfig dependencies to select CONFIG_USE_OF.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/boot/dts/Makefile              |    3 ++-
 arch/arm/boot/dts/sh7372-mackerel.dts   |   22 ++++++++++++++++++++++
 arch/arm/mach-shmobile/Kconfig          |    1 +
 arch/arm/mach-shmobile/board-mackerel.c |    8 +++++++-
 4 files changed, 32 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/sh7372-mackerel.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c1ce813..0632239 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -75,7 +75,8 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
 dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
 	r8a7740-armadillo800eva.dtb \
-	sh73a0-kzm9g.dtb
+	sh73a0-kzm9g.dtb \
+	sh7372-mackerel.dtb
 dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
 	spear1340-evb.dtb
 dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
diff --git a/arch/arm/boot/dts/sh7372-mackerel.dts b/arch/arm/boot/dts/sh7372-mackerel.dts
new file mode 100644
index 0000000..286f0ca
--- /dev/null
+++ b/arch/arm/boot/dts/sh7372-mackerel.dts
@@ -0,0 +1,22 @@
+/*
+ * Device Tree Source for the mackerel board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Mackerel (AP4 EVM 2nd)";
+	compatible = "renesas,mackerel";
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x10000000>;
+	};
+};
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 8ae100c..0750d9c 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -95,6 +95,7 @@ config MACH_MACKEREL
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD
+	select USE_OF
 
 config MACH_KOTA2
 	bool "KOTA2 board"
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 0c27c81..39b8f2e 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1651,7 +1651,12 @@ static void __init mackerel_init(void)
 	pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
 }
 
-MACHINE_START(MACKEREL, "mackerel")
+static const char *mackerel_boards_compat_dt[] __initdata = {
+	"renesas,mackerel",
+	NULL,
+};
+
+DT_MACHINE_START(MACKEREL_DT, "mackerel")
 	.map_io		= sh7372_map_io,
 	.init_early	= sh7372_add_early_devices,
 	.init_irq	= sh7372_init_irq,
@@ -1659,4 +1664,5 @@ MACHINE_START(MACKEREL, "mackerel")
 	.init_machine	= mackerel_init,
 	.init_late	= sh7372_pm_init_late,
 	.timer		= &shmobile_timer,
+	.dt_compat  = mackerel_boards_compat_dt,
 MACHINE_END
-- 
1.7.10.4

[PATCH 7/8] ARM: shmobile: Remove G3EVM machine support

[Simon Horman]

From: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>

This machine is using old CPU of shmobile (SH7367) and cannot obtain
machine, either.
Therefore, remove G3EVM support.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/g3evm_defconfig     |   57 ------
 arch/arm/mach-shmobile/Kconfig       |    7 -
 arch/arm/mach-shmobile/Makefile      |    1 -
 arch/arm/mach-shmobile/board-g3evm.c |  343 ----------------------------------
 4 files changed, 408 deletions(-)
 delete mode 100644 arch/arm/configs/g3evm_defconfig
 delete mode 100644 arch/arm/mach-shmobile/board-g3evm.c

diff --git a/arch/arm/configs/g3evm_defconfig b/arch/arm/configs/g3evm_defconfig
deleted file mode 100644
index 4a336ab..0000000
--- a/arch/arm/configs/g3evm_defconfig
+++ /dev/null
@@ -1,57 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_SH7367=y
-CONFIG_MACH_G3EVM=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200"
-CONFIG_KEXEC=y
-CONFIG_PM=y
-# CONFIG_SUSPEND is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 0750d9c..73c2021 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -50,11 +50,6 @@ config ARCH_EMEV2
 
 comment "SH-Mobile Board Type"
 
-config MACH_G3EVM
-	bool "G3EVM board"
-	depends on ARCH_SH7367
-	select ARCH_REQUIRE_GPIOLIB
-
 config MACH_G4EVM
 	bool "G4EVM board"
 	depends on ARCH_SH7377
@@ -147,7 +142,6 @@ menu "Memory configuration"
 
 config MEMORY_START
 	hex "Physical memory start address"
-	default "0x50000000" if MACH_G3EVM
 	default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
 				MACH_MACKEREL || MACH_BONITO || \
 				MACH_ARMADILLO800EVA
@@ -160,7 +154,6 @@ config MEMORY_START
 
 config MEMORY_SIZE
 	hex "Physical memory size"
-	default "0x08000000" if MACH_G3EVM
 	default "0x08000000" if MACH_G4EVM
 	default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
 				MACH_ARMADILLO800EVA
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index fe2c97c..30a6c83 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -45,7 +45,6 @@ obj-$(CONFIG_ARCH_R8A7740)	+= pm-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
 
 # Board objects
-obj-$(CONFIG_MACH_G3EVM)	+= board-g3evm.o
 obj-$(CONFIG_MACH_G4EVM)	+= board-g4evm.o
 obj-$(CONFIG_MACH_AP4EVB)	+= board-ap4evb.o
 obj-$(CONFIG_MACH_AG5EVM)	+= board-ag5evm.o
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
deleted file mode 100644
index b179d4c..0000000
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- * G3EVM board support
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/sh_flctl.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/dma-mapping.h>
-#include <mach/irqs.h>
-#include <mach/sh7367.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-/*
- * IrDA
- *
- * S67: 5bit : ON  power
- *    : 6bit : ON  remote control
- *             OFF IrDA
- */
-
-static struct mtd_partition nor_flash_partitions[] = {
-	{
-		.name		= "loader",
-		.offset		= 0x00000000,
-		.size		= 512 * 1024,
-	},
-	{
-		.name		= "bootenv",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 512 * 1024,
-	},
-	{
-		.name		= "kernel_ro",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-	},
-	{
-		.name		= "data",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data nor_flash_data = {
-	.width		= 2,
-	.parts		= nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
-	[0]	= {
-		.start	= 0x00000000,
-		.end	= 0x08000000 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device nor_flash_device = {
-	.name		= "physmap-flash",
-	.dev		= {
-		.platform_data	= &nor_flash_data,
-	},
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-	.resource	= nor_flash_resources,
-};
-
-/* USBHS */
-static void usb_host_port_power(int port, int power)
-{
-	if (!power) /* only power-on supported for now */
-		return;
-
-	/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
-	__raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008));
-}
-
-static struct r8a66597_platdata usb_host_data = {
-	.on_chip = 1,
-	.port_power = usb_host_port_power,
-};
-
-static struct resource usb_host_resources[] = {
-	[0] = {
-		.name	= "USBHS",
-		.start	= 0xe6890000,
-		.end	= 0xe68900e5,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0xa20), /* USBHS_USHI0 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb_host_device = {
-	.name		= "r8a66597_hcd",
-	.id		= 0,
-	.dev = {
-		.platform_data		= &usb_host_data,
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(usb_host_resources),
-	.resource	= usb_host_resources,
-};
-
-/* KEYSC */
-static struct sh_keysc_info keysc_info = {
-	.mode		= SH_KEYSC_MODE_5,
-	.scan_timing	= 3,
-	.delay		= 100,
-	.keycodes = {
-		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G,
-		KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N,
-		KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U,
-		KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP,
-		KEY_WAKEUP, KEY_COFFEE, KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
-		KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER,
-	},
-};
-
-static struct resource keysc_resources[] = {
-	[0] = {
-		.name	= "KEYSC",
-		.start  = 0xe61b0000,
-		.end    = 0xe61b000f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0xbe0), /* KEYSC_KEY */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device keysc_device = {
-	.name           = "sh_keysc",
-	.num_resources  = ARRAY_SIZE(keysc_resources),
-	.resource       = keysc_resources,
-	.dev	= {
-		.platform_data	= &keysc_info,
-	},
-};
-
-static struct mtd_partition nand_partition_info[] = {
-	{
-		.name	= "system",
-		.offset	= 0,
-		.size	= 64 * 1024 * 1024,
-	},
-	{
-		.name	= "userdata",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 128 * 1024 * 1024,
-	},
-	{
-		.name	= "cache",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 64 * 1024 * 1024,
-	},
-};
-
-static struct resource nand_flash_resources[] = {
-	[0] = {
-		.start	= 0xe6a30000,
-		.end	= 0xe6a3009b,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct sh_flctl_platform_data nand_flash_data = {
-	.parts		= nand_partition_info,
-	.nr_parts	= ARRAY_SIZE(nand_partition_info),
-	.flcmncr_val	= QTSEL_E | FCKSEL_E | TYPESEL_SET | NANWF_E
-			| SHBUSSEL | SEL_16BIT,
-};
-
-static struct platform_device nand_flash_device = {
-	.name		= "sh_flctl",
-	.resource	= nand_flash_resources,
-	.num_resources	= ARRAY_SIZE(nand_flash_resources),
-	.dev		= {
-		.platform_data = &nand_flash_data,
-	},
-};
-
-static struct resource irda_resources[] = {
-	[0] = {
-		.start	= 0xE6D00000,
-		.end	= 0xE6D01FD4 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0x480), /* IRDA */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device irda_device = {
-	.name		= "sh_irda",
-	.id		= -1,
-	.resource	= irda_resources,
-	.num_resources	= ARRAY_SIZE(irda_resources),
-};
-
-static struct platform_device *g3evm_devices[] __initdata = {
-	&nor_flash_device,
-	&usb_host_device,
-	&keysc_device,
-	&nand_flash_device,
-	&irda_device,
-};
-
-static void __init g3evm_init(void)
-{
-	sh7367_pinmux_init();
-
-	/* Lit DS4 LED */
-	gpio_request(GPIO_PORT22, NULL);
-	gpio_direction_output(GPIO_PORT22, 1);
-	gpio_export(GPIO_PORT22, 0);
-
-	/* Lit DS8 LED */
-	gpio_request(GPIO_PORT23, NULL);
-	gpio_direction_output(GPIO_PORT23, 1);
-	gpio_export(GPIO_PORT23, 0);
-
-	/* Lit DS3 LED */
-	gpio_request(GPIO_PORT24, NULL);
-	gpio_direction_output(GPIO_PORT24, 1);
-	gpio_export(GPIO_PORT24, 0);
-
-	/* SCIFA1 */
-	gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
-	gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
-	gpio_request(GPIO_FN_SCIFA1_CTS, NULL);
-	gpio_request(GPIO_FN_SCIFA1_RTS, NULL);
-
-	/* USBHS */
-	gpio_request(GPIO_FN_VBUS0, NULL);
-	gpio_request(GPIO_FN_PWEN, NULL);
-	gpio_request(GPIO_FN_OVCN, NULL);
-	gpio_request(GPIO_FN_OVCN2, NULL);
-	gpio_request(GPIO_FN_EXTLP, NULL);
-	gpio_request(GPIO_FN_IDIN, NULL);
-
-	/* setup USB phy */
-	__raw_writew(0x0300, IOMEM(0xe605810a));	/* USBCR1 */
-	__raw_writew(0x00e0, IOMEM(0xe60581c0));	/* CPFCH */
-	__raw_writew(0x6010, IOMEM(0xe60581c6));	/* CGPOSR */
-	__raw_writew(0x8a0a, IOMEM(0xe605810c));	/* USBCR2 */
-
-	/* KEYSC @ CN7 */
-	gpio_request(GPIO_FN_PORT42_KEYOUT0, NULL);
-	gpio_request(GPIO_FN_PORT43_KEYOUT1, NULL);
-	gpio_request(GPIO_FN_PORT44_KEYOUT2, NULL);
-	gpio_request(GPIO_FN_PORT45_KEYOUT3, NULL);
-	gpio_request(GPIO_FN_PORT46_KEYOUT4, NULL);
-	gpio_request(GPIO_FN_PORT47_KEYOUT5, NULL);
-	gpio_request(GPIO_FN_PORT48_KEYIN0_PU, NULL);
-	gpio_request(GPIO_FN_PORT49_KEYIN1_PU, NULL);
-	gpio_request(GPIO_FN_PORT50_KEYIN2_PU, NULL);
-	gpio_request(GPIO_FN_PORT55_KEYIN3_PU, NULL);
-	gpio_request(GPIO_FN_PORT56_KEYIN4_PU, NULL);
-	gpio_request(GPIO_FN_PORT57_KEYIN5_PU, NULL);
-	gpio_request(GPIO_FN_PORT58_KEYIN6_PU, NULL);
-
-	/* FLCTL */
-	gpio_request(GPIO_FN_FCE0, NULL);
-	gpio_request(GPIO_FN_D0_ED0_NAF0, NULL);
-	gpio_request(GPIO_FN_D1_ED1_NAF1, NULL);
-	gpio_request(GPIO_FN_D2_ED2_NAF2, NULL);
-	gpio_request(GPIO_FN_D3_ED3_NAF3, NULL);
-	gpio_request(GPIO_FN_D4_ED4_NAF4, NULL);
-	gpio_request(GPIO_FN_D5_ED5_NAF5, NULL);
-	gpio_request(GPIO_FN_D6_ED6_NAF6, NULL);
-	gpio_request(GPIO_FN_D7_ED7_NAF7, NULL);
-	gpio_request(GPIO_FN_D8_ED8_NAF8, NULL);
-	gpio_request(GPIO_FN_D9_ED9_NAF9, NULL);
-	gpio_request(GPIO_FN_D10_ED10_NAF10, NULL);
-	gpio_request(GPIO_FN_D11_ED11_NAF11, NULL);
-	gpio_request(GPIO_FN_D12_ED12_NAF12, NULL);
-	gpio_request(GPIO_FN_D13_ED13_NAF13, NULL);
-	gpio_request(GPIO_FN_D14_ED14_NAF14, NULL);
-	gpio_request(GPIO_FN_D15_ED15_NAF15, NULL);
-	gpio_request(GPIO_FN_WE0_XWR0_FWE, NULL);
-	gpio_request(GPIO_FN_FRB, NULL);
-	/* FOE, FCDE, FSC on dedicated pins */
-	__raw_writel(__raw_readl(IOMEM(0xe6158048)) & ~(1 << 15), IOMEM(0xe6158048));
-
-	/* IrDA */
-	gpio_request(GPIO_FN_IRDA_OUT, NULL);
-	gpio_request(GPIO_FN_IRDA_IN, NULL);
-	gpio_request(GPIO_FN_IRDA_FIRSEL, NULL);
-
-	sh7367_add_standard_devices();
-
-	platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices));
-}
-
-MACHINE_START(G3EVM, "g3evm")
-	.map_io		= sh7367_map_io,
-	.init_early	= sh7367_add_early_devices,
-	.init_irq	= sh7367_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
-	.init_machine	= g3evm_init,
-	.init_late	= shmobile_init_late,
-	.timer		= &shmobile_timer,
-MACHINE_END
-- 
1.7.10.4

[PATCH 8/8] ARM: shmobile: Remove G4EVM machine support

[Simon Horman]

From: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>

This machine is using old CPU of shmobile (sh7377) and cannot obtain
machine, either.
Therefore, remove G4EVM support.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/g4evm_defconfig     |   57 -----
 arch/arm/mach-shmobile/Kconfig       |    9 +-
 arch/arm/mach-shmobile/Makefile      |    1 -
 arch/arm/mach-shmobile/board-g4evm.c |  384 ----------------------------------
 4 files changed, 1 insertion(+), 450 deletions(-)
 delete mode 100644 arch/arm/configs/g4evm_defconfig
 delete mode 100644 arch/arm/mach-shmobile/board-g4evm.c

diff --git a/arch/arm/configs/g4evm_defconfig b/arch/arm/configs/g4evm_defconfig
deleted file mode 100644
index 21c6d03..0000000
--- a/arch/arm/configs/g4evm_defconfig
+++ /dev/null
@@ -1,57 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_SH7377=y
-CONFIG_MACH_G4EVM=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200"
-CONFIG_KEXEC=y
-CONFIG_PM=y
-# CONFIG_SUSPEND is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 73c2021..f58c3ea 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -50,12 +50,6 @@ config ARCH_EMEV2
 
 comment "SH-Mobile Board Type"
 
-config MACH_G4EVM
-	bool "G4EVM board"
-	depends on ARCH_SH7377
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
 config MACH_AP4EVB
 	bool "AP4EVB board"
 	depends on ARCH_SH7372
@@ -142,7 +136,7 @@ menu "Memory configuration"
 
 config MEMORY_START
 	hex "Physical memory start address"
-	default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
+	default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \
 				MACH_MACKEREL || MACH_BONITO || \
 				MACH_ARMADILLO800EVA
 	default "0x41000000" if MACH_KOTA2
@@ -154,7 +148,6 @@ config MEMORY_START
 
 config MEMORY_SIZE
 	hex "Physical memory size"
-	default "0x08000000" if MACH_G4EVM
 	default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
 				MACH_ARMADILLO800EVA
 	default "0x1e000000" if MACH_KOTA2
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 30a6c83..bd2633b 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -45,7 +45,6 @@ obj-$(CONFIG_ARCH_R8A7740)	+= pm-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
 
 # Board objects
-obj-$(CONFIG_MACH_G4EVM)	+= board-g4evm.o
 obj-$(CONFIG_MACH_AP4EVB)	+= board-ap4evb.o
 obj-$(CONFIG_MACH_AG5EVM)	+= board-ag5evm.o
 obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
deleted file mode 100644
index 35c126c..0000000
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * G4EVM board support
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/gpio.h>
-#include <linux/dma-mapping.h>
-#include <mach/irqs.h>
-#include <mach/sh7377.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "sh-gpio.h"
-
-/*
- * SDHI
- *
- * SDHI0 : card detection is possible
- * SDHI1 : card detection is impossible
- *
- * [G4-MAIN-BOARD]
- * JP74 : short		# DBG_2V8A    for SDHI0
- * JP75 : NC		# DBG_3V3A    for SDHI0
- * JP76 : NC		# DBG_3V3A_SD for SDHI0
- * JP77 : NC		# 3V3A_SDIO   for SDHI1
- * JP78 : short		# DBG_2V8A    for SDHI1
- * JP79 : NC		# DBG_3V3A    for SDHI1
- * JP80 : NC		# DBG_3V3A_SD for SDHI1
- *
- * [G4-CORE-BOARD]
- * S32 : all off	# to dissever from G3-CORE_DBG board
- * S33 : all off	# to dissever from G3-CORE_DBG board
- *
- * [G3-CORE_DBG-BOARD]
- * S1  : all off	# to dissever from G3-CORE_DBG board
- * S3  : all off	# to dissever from G3-CORE_DBG board
- * S4  : all off	# to dissever from G3-CORE_DBG board
- */
-
-static struct mtd_partition nor_flash_partitions[] = {
-	{
-		.name		= "loader",
-		.offset		= 0x00000000,
-		.size		= 512 * 1024,
-	},
-	{
-		.name		= "bootenv",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 512 * 1024,
-	},
-	{
-		.name		= "kernel_ro",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-	},
-	{
-		.name		= "data",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data nor_flash_data = {
-	.width		= 2,
-	.parts		= nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
-	[0]	= {
-		.start	= 0x00000000,
-		.end	= 0x08000000 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device nor_flash_device = {
-	.name		= "physmap-flash",
-	.dev		= {
-		.platform_data	= &nor_flash_data,
-	},
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-	.resource	= nor_flash_resources,
-};
-
-/* USBHS */
-static void usb_host_port_power(int port, int power)
-{
-	if (!power) /* only power-on supported for now */
-		return;
-
-	/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
-	__raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008));
-}
-
-static struct r8a66597_platdata usb_host_data = {
-	.on_chip = 1,
-	.port_power = usb_host_port_power,
-};
-
-static struct resource usb_host_resources[] = {
-	[0] = {
-		.name	= "USBHS",
-		.start	= 0xe6890000,
-		.end	= 0xe68900e5,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x0a20), /* USBHS_USHI0 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb_host_device = {
-	.name		= "r8a66597_hcd",
-	.id		= 0,
-	.dev = {
-		.platform_data		= &usb_host_data,
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(usb_host_resources),
-	.resource	= usb_host_resources,
-};
-
-/* KEYSC */
-static struct sh_keysc_info keysc_info = {
-	.mode		= SH_KEYSC_MODE_5,
-	.scan_timing	= 3,
-	.delay		= 100,
-	.keycodes = {
-		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
-		KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L,
-		KEY_M, KEY_N, KEY_U, KEY_P, KEY_Q, KEY_R,
-		KEY_S, KEY_T, KEY_U, KEY_V, KEY_W, KEY_X,
-		KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE,
-		KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
-		KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER,
-	},
-};
-
-static struct resource keysc_resources[] = {
-	[0] = {
-		.name	= "KEYSC",
-		.start  = 0xe61b0000,
-		.end    = 0xe61b000f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0x0be0), /* KEYSC_KEY */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device keysc_device = {
-	.name           = "sh_keysc",
-	.id             = 0, /* keysc0 clock */
-	.num_resources  = ARRAY_SIZE(keysc_resources),
-	.resource       = keysc_resources,
-	.dev	= {
-		.platform_data	= &keysc_info,
-	},
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-/* SDHI */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.tmio_caps	= MMC_CAP_SDIO_IRQ,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "SDHI0",
-		.start  = 0xe6d50000,
-		.end    = 0xe6d500ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0x0e00), /* SDHI0 */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name           = "sh_mobile_sdhi",
-	.num_resources  = ARRAY_SIZE(sdhi0_resources),
-	.resource       = sdhi0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-static struct sh_mobile_sdhi_info sdhi1_info = {
-	.tmio_caps	= MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name	= "SDHI1",
-		.start  = 0xe6d60000,
-		.end    = 0xe6d600ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0x0e80), /* SDHI1 */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name           = "sh_mobile_sdhi",
-	.num_resources  = ARRAY_SIZE(sdhi1_resources),
-	.resource       = sdhi1_resources,
-	.id             = 1,
-	.dev	= {
-		.platform_data	= &sdhi1_info,
-	},
-};
-
-static struct platform_device *g4evm_devices[] __initdata = {
-	&nor_flash_device,
-	&usb_host_device,
-	&keysc_device,
-	&sdhi0_device,
-	&sdhi1_device,
-};
-
-#define GPIO_SDHID0_D0	IOMEM(0xe60520fc)
-#define GPIO_SDHID0_D1	IOMEM(0xe60520fd)
-#define GPIO_SDHID0_D2	IOMEM(0xe60520fe)
-#define GPIO_SDHID0_D3	IOMEM(0xe60520ff)
-#define GPIO_SDHICMD0	IOMEM(0xe6052100)
-
-#define GPIO_SDHID1_D0	IOMEM(0xe6052103)
-#define GPIO_SDHID1_D1	IOMEM(0xe6052104)
-#define GPIO_SDHID1_D2	IOMEM(0xe6052105)
-#define GPIO_SDHID1_D3	IOMEM(0xe6052106)
-#define GPIO_SDHICMD1	IOMEM(0xe6052107)
-
-static void __init g4evm_init(void)
-{
-	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
-				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
-	sh7377_pinmux_init();
-
-	/* Lit DS14 LED */
-	gpio_request(GPIO_PORT109, NULL);
-	gpio_direction_output(GPIO_PORT109, 1);
-	gpio_export(GPIO_PORT109, 1);
-
-	/* Lit DS15 LED */
-	gpio_request(GPIO_PORT110, NULL);
-	gpio_direction_output(GPIO_PORT110, 1);
-	gpio_export(GPIO_PORT110, 1);
-
-	/* Lit DS16 LED */
-	gpio_request(GPIO_PORT112, NULL);
-	gpio_direction_output(GPIO_PORT112, 1);
-	gpio_export(GPIO_PORT112, 1);
-
-	/* Lit DS17 LED */
-	gpio_request(GPIO_PORT113, NULL);
-	gpio_direction_output(GPIO_PORT113, 1);
-	gpio_export(GPIO_PORT113, 1);
-
-	/* USBHS */
-	gpio_request(GPIO_FN_VBUS_0, NULL);
-	gpio_request(GPIO_FN_PWEN, NULL);
-	gpio_request(GPIO_FN_OVCN, NULL);
-	gpio_request(GPIO_FN_OVCN2, NULL);
-	gpio_request(GPIO_FN_EXTLP, NULL);
-	gpio_request(GPIO_FN_IDIN, NULL);
-
-	/* setup USB phy */
-	__raw_writew(0x0200, IOMEM(0xe605810a));       /* USBCR1 */
-	__raw_writew(0x00e0, IOMEM(0xe60581c0));       /* CPFCH */
-	__raw_writew(0x6010, IOMEM(0xe60581c6));       /* CGPOSR */
-	__raw_writew(0x8a0a, IOMEM(0xe605810c));       /* USBCR2 */
-
-	/* KEYSC @ CN31 */
-	gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL);
-	gpio_request(GPIO_FN_PORT61_KEYOUT4, NULL);
-	gpio_request(GPIO_FN_PORT62_KEYOUT3, NULL);
-	gpio_request(GPIO_FN_PORT63_KEYOUT2, NULL);
-	gpio_request(GPIO_FN_PORT64_KEYOUT1, NULL);
-	gpio_request(GPIO_FN_PORT65_KEYOUT0, NULL);
-	gpio_request(GPIO_FN_PORT66_KEYIN0_PU, NULL);
-	gpio_request(GPIO_FN_PORT67_KEYIN1_PU, NULL);
-	gpio_request(GPIO_FN_PORT68_KEYIN2_PU, NULL);
-	gpio_request(GPIO_FN_PORT69_KEYIN3_PU, NULL);
-	gpio_request(GPIO_FN_PORT70_KEYIN4_PU, NULL);
-	gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL);
-	gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL);
-
-	/* SDHI0 */
-	gpio_request(GPIO_FN_SDHICLK0, NULL);
-	gpio_request(GPIO_FN_SDHICD0, NULL);
-	gpio_request(GPIO_FN_SDHID0_0, NULL);
-	gpio_request(GPIO_FN_SDHID0_1, NULL);
-	gpio_request(GPIO_FN_SDHID0_2, NULL);
-	gpio_request(GPIO_FN_SDHID0_3, NULL);
-	gpio_request(GPIO_FN_SDHICMD0, NULL);
-	gpio_request(GPIO_FN_SDHIWP0, NULL);
-	gpio_request_pullup(GPIO_SDHID0_D0);
-	gpio_request_pullup(GPIO_SDHID0_D1);
-	gpio_request_pullup(GPIO_SDHID0_D2);
-	gpio_request_pullup(GPIO_SDHID0_D3);
-	gpio_request_pullup(GPIO_SDHICMD0);
-
-	/* SDHI1 */
-	gpio_request(GPIO_FN_SDHICLK1, NULL);
-	gpio_request(GPIO_FN_SDHID1_0, NULL);
-	gpio_request(GPIO_FN_SDHID1_1, NULL);
-	gpio_request(GPIO_FN_SDHID1_2, NULL);
-	gpio_request(GPIO_FN_SDHID1_3, NULL);
-	gpio_request(GPIO_FN_SDHICMD1, NULL);
-	gpio_request_pullup(GPIO_SDHID1_D0);
-	gpio_request_pullup(GPIO_SDHID1_D1);
-	gpio_request_pullup(GPIO_SDHID1_D2);
-	gpio_request_pullup(GPIO_SDHID1_D3);
-	gpio_request_pullup(GPIO_SDHICMD1);
-
-	sh7377_add_standard_devices();
-
-	platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
-}
-
-MACHINE_START(G4EVM, "g4evm")
-	.map_io		= sh7377_map_io,
-	.init_early	= sh7377_add_early_devices,
-	.init_irq	= sh7377_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
-	.init_machine	= g4evm_init,
-	.init_late	= shmobile_init_late,
-	.timer		= &shmobile_timer,
-MACHINE_END
-- 
1.7.10.4

[GIT PULL v3] Renesas ARM-based SoC boards for v3.8

[Simon Horman]

On Thu, Nov 01, 2012 at 08:40:03AM +0800, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> please consider the following board enhancements for 3.8.

Ping.

> This differs from v2 of this pull request in that:
> * Several patches have been moved to the soc branch which
>   I will send a pull request for shortly.
>   - ARM: shmobile: r8a7779: add HSPI clock support
>   - ARM: shmobile: r8a7779: add I2C clock support
>   - ARM: shmobile: r8a7779: add I2C driver support
>   - ARM: shmobile: r8a7740: Enable PMU
> * Several new patches have been added.
>   - ARM: shmobile: Remove G4EVM machine support
>   - ARM: shmobile: Remove G3EVM machine support
> 
> ---------------------------------------------------------------
> The following changes since commit ddffeb8c4d0331609ef2581d84de4d763607bd37:
> 
>   Linux 3.7-rc1 (2012-10-14 14:41:04 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git boards
> 
> for you to fetch changes up to 631a7b5d958d2ef2c2333b105794c693642f0641:
> 
>   ARM: shmobile: Remove G4EVM machine support (2012-10-30 15:25:59 +0800)
> 
> ----------------------------------------------------------------
> Kuninori Morimoto (2):
>       ARM: shmobile: armadillo800eva: enable restart
>       ARM: shmobile: marzen: add HSPI support
> 
> Nobuhiro Iwamatsu (3):
>       ARM: mach-shmobile: Use DT_MACHINE for mackerel
>       ARM: shmobile: Remove G3EVM machine support
>       ARM: shmobile: Remove G4EVM machine support
> 
> Tetsuyuki Kobayashi (3):
>       ARM: shmobile: kzm9g: enable magnetometer ak8975.
>       ARM: shmobile: kzm9g: enable three-axis digital accelerometer ADXL345
>       ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2
> 
>  arch/arm/boot/dts/Makefile                     |    3 +-
>  arch/arm/boot/dts/sh7372-mackerel.dts          |   22 ++
>  arch/arm/configs/g3evm_defconfig               |   57 ----
>  arch/arm/configs/g4evm_defconfig               |   57 ----
>  arch/arm/configs/kzm9g_defconfig               |    4 +
>  arch/arm/configs/marzen_defconfig              |    4 +
>  arch/arm/mach-shmobile/Kconfig                 |   17 +-
>  arch/arm/mach-shmobile/Makefile                |    2 -
>  arch/arm/mach-shmobile/board-armadillo800eva.c |    8 +
>  arch/arm/mach-shmobile/board-g3evm.c           |  343 ---------------------
>  arch/arm/mach-shmobile/board-g4evm.c           |  384 ------------------------
>  arch/arm/mach-shmobile/board-kzm9g.c           |   14 +-
>  arch/arm/mach-shmobile/board-mackerel.c        |    8 +-
>  arch/arm/mach-shmobile/board-marzen.c          |   25 ++
>  14 files changed, 87 insertions(+), 861 deletions(-)
>  create mode 100644 arch/arm/boot/dts/sh7372-mackerel.dts
>  delete mode 100644 arch/arm/configs/g3evm_defconfig
>  delete mode 100644 arch/arm/configs/g4evm_defconfig
>  delete mode 100644 arch/arm/mach-shmobile/board-g3evm.c
>  delete mode 100644 arch/arm/mach-shmobile/board-g4evm.c
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

[GIT PULL v3] Renesas ARM-based SoC boards for v3.8

[Olof Johansson]

On Thu, Nov 01, 2012 at 08:40:03AM +0800, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> please consider the following board enhancements for 3.8.
> 
> This differs from v2 of this pull request in that:
> * Several patches have been moved to the soc branch which
>   I will send a pull request for shortly.
>   - ARM: shmobile: r8a7779: add HSPI clock support
>   - ARM: shmobile: r8a7779: add I2C clock support
>   - ARM: shmobile: r8a7779: add I2C driver support
>   - ARM: shmobile: r8a7740: Enable PMU
> * Several new patches have been added.
>   - ARM: shmobile: Remove G4EVM machine support
>   - ARM: shmobile: Remove G3EVM machine support
> 
> ---------------------------------------------------------------
> The following changes since commit ddffeb8c4d0331609ef2581d84de4d763607bd37:
> 
>   Linux 3.7-rc1 (2012-10-14 14:41:04 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git boards

Thanks, pulled.


-Olof