public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 14/15] charger: max14577: Configure battery-dependent settings from DTS
Date: Mon, 10 Feb 2014 12:14:05 +0000	[thread overview]
Message-ID: <20140210121405.GH22773@lee--X1> (raw)
In-Reply-To: <1391767487-10017-15-git-send-email-k.kozlowski@samsung.com>

> Remove hard-coded values for:
>  - Fast Charge current,
>  - End Of Charge current,
>  - Fast Charge timer,
>  - Overvoltage Protection Threshold,
>  - Battery Constant Voltage,
> and use DTS to configure them. This allows using the max14577 charger
> driver with different batteries.
> 
> Now the charger driver requires valid configuration data from DTS. In
> case of wrong configuration data it fails during probe. Patch adds
> of_compatible to the charger mfd cell in MFD driver core.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: Marek Szyprowski <m.szyprowski@samsung.com>
> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
> Cc: David Woodhouse <dwmw2@infradead.org>
> Cc: Jenny Tc <jenny.tc@intel.com>
> ---
>  drivers/mfd/max14577.c               |    5 +-
>  drivers/power/max14577_charger.c     |  234 +++++++++++++++++++++++++++++-----
>  include/linux/mfd/max14577-private.h |   10 ++
>  include/linux/mfd/max14577.h         |    8 ++
>  4 files changed, 227 insertions(+), 30 deletions(-)

<snip>

> diff --git a/include/linux/mfd/max14577-private.h b/include/linux/mfd/max14577-private.h
> index a8cd7de3526a..50cf70bec4d4 100644
> --- a/include/linux/mfd/max14577-private.h
> +++ b/include/linux/mfd/max14577-private.h
> @@ -269,6 +269,16 @@ enum maxim_muic_charger_type {
>  #define MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP	 25000U
>  #define MAX77836_CHARGER_CURRENT_LIMIT_MAX		475000U
>  
> +/* MAX14577 charger End-Of-Charge current limits (as in MAXIM_CHGCTRL5 register), uA */

Too many chars. Didn't checkpatch.pl complain about this?

> +#define MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN		50000U
> +#define MAX14577_CHARGER_EOC_CURRENT_LIMIT_STEP		10000U
> +#define MAX14577_CHARGER_EOC_CURRENT_LIMIT_MAX		200000U
> +
> +/* MAX14577/MAX77836 Battery Constant Voltage (as in MAXIM_CHGCTRL3
> register), uV */

Same here

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  parent reply	other threads:[~2014-02-10 12:14 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-07 10:04 [PATCH v2 00/15] mfd: max14577: Add support for MAX77836 Krzysztof Kozlowski
2014-02-07 10:04 ` [PATCH v2 01/15] extcon: max14577: Change extcon name instead of static name according to device type Krzysztof Kozlowski
2014-02-07 10:04 ` [PATCH v2 02/15] mfd: max14577: Rename and add MAX14577 symbols to prepare for max77836 Krzysztof Kozlowski
2014-02-07 10:04 ` [PATCH v2 03/15] mfd: max14577: Rename state container to maxim_core Krzysztof Kozlowski
2014-02-07 10:04 ` [PATCH v2 04/15] mfd: max14577: Add "muic" suffix to regmap and irq_chip Krzysztof Kozlowski
2014-02-07 10:04 ` [PATCH v2 05/15] mfd: max14577: Add detection of device type Krzysztof Kozlowski
2014-02-07 10:53   ` Lee Jones
2014-02-07 10:04 ` [PATCH v2 06/15] extcon: max14577: Add max14577 prefix to muic_irqs Krzysztof Kozlowski
2014-02-07 10:04 ` [PATCH v2 07/15] extcon: max14577: Choose muic_irqs according to device type Krzysztof Kozlowski
2014-02-07 10:04 ` [PATCH v2 08/15] mfd: max77836: Add max77836 support to max14577 driver Krzysztof Kozlowski
2014-02-07 10:48   ` Lee Jones
2014-02-07 10:49   ` Lee Jones
2014-02-07 10:54     ` Krzysztof Kozlowski
2014-02-10 12:02   ` Lee Jones
2014-02-07 10:04 ` [PATCH v2 09/15] extcon: max14577: Add support for max77836 Krzysztof Kozlowski
2014-02-07 10:04 ` [PATCH v2 10/15] regulator: max14577: Add support for max77836 regulators Krzysztof Kozlowski
2014-02-07 10:04 ` [PATCH v2 11/15] charger: max14577: Add support for MAX77836 charger Krzysztof Kozlowski
2014-02-07 10:04 ` [PATCH v2 12/15] power: max17040: Add ID for max77836 Fuel Gauge block Krzysztof Kozlowski
2014-02-07 10:04 ` [PATCH v2 13/15] regulator/mfd: max14577: Export symbols for calculating charger current Krzysztof Kozlowski
2014-02-07 16:34   ` Mark Brown
2014-02-10 11:59   ` Lee Jones
2014-02-10 14:24     ` Lee Jones
2014-02-07 10:04 ` [PATCH v2 14/15] charger: max14577: Configure battery-dependent settings from DTS Krzysztof Kozlowski
2014-02-07 10:42   ` Lee Jones
2014-02-07 10:46     ` Krzysztof Kozlowski
2014-02-10 12:14   ` Lee Jones [this message]
2014-02-10 15:06     ` Krzysztof Kozlowski
2014-02-07 10:04 ` [PATCH v2 15/15] mfd: max14577: Add device tree bindings document Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140210121405.GH22773@lee--X1 \
    --to=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox